component
STM32F429NIH6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), TFBGA-216. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F429NIH6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · TFBGA-216
STM32F429NIH6 from STMicroelectronics, in a TFBGA-216. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | PE4 | bidirectional | GPIO Port E pin 4, 5V tolerant I/O for TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0 |
| A2 | PE3 | bidirectional | GPIO Port E pin 3, 5V tolerant I/O for TRACED0, SAI1_SD_B, FMC_A19 |
| A3 | PE2 | bidirectional | GPIO Port E pin 2, 5V tolerant I/O for TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23 |
| A4 | PG14 | bidirectional | |
| A5 | PE1 | bidirectional | |
| A6 | PE0 | bidirectional | |
| A7 | PB8 | bidirectional | |
| A8 | PB5 | bidirectional | |
| A9 | PB4 | bidirectional | |
| B1 | PE5 | bidirectional | GPIO Port E pin 5, 5V tolerant I/O for TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0 |
| B2 | PE6 | bidirectional | GPIO Port E pin 6, 5V tolerant I/O for TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1 |
| B3 | PG13 | bidirectional | |
| B4 | PB9 | bidirectional | |
| B5 | PB7 | bidirectional | |
| B6 | PB6 | bidirectional | |
| B7 | PG15 | bidirectional | |
| B8 | PG11 | bidirectional | |
| B9 | PJ13 | bidirectional | |
| C1 | VBAT | power_in | Backup domain supply pin 1.8V to 3.6V for RTC and backup registers |
| C2 | PI8 | bidirectional | GPIO Port I pin 8, 5V tolerant I/O with power switch (3mA limit), alternate function EVENTOUT, additional function TAMP_2 |
| C3 | PI4 | bidirectional | |
| C4 | PK7 | bidirectional | |
| C5 | PK6 | bidirectional | |
| C6 | PK5 | bidirectional | |
| C7 | PG12 | bidirectional | |
| C8 | PG10 | bidirectional | |
| C9 | PJ14 | bidirectional | |
| D1 | PC13 | bidirectional | GPIO Port C pin 13, 5V tolerant I/O with power switch (3mA limit), alternate function EVENTOUT, additional function TAMP_1 |
| D2 | PF0 | bidirectional | |
| D3 | PI5 | bidirectional | |
| D4 | PI7 | bidirectional | |
| D5 | PI10 | bidirectional | GPIO Port I pin 10, 5V tolerant I/O for ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, EVENTOUT |
| D6 | PI6 | bidirectional | |
| D7 | PK4 | bidirectional | |
| D8 | PK3 | bidirectional | |
| D9 | PG9 | bidirectional | |
| E1 | PC14/OSC32_IN | bidirectional | GPIO Port C pin 14 OSC32_IN, 5V tolerant I/O with power switch, alternate functions: EVENTOUT, OSC32_IN |
| E2 | PF1 | bidirectional | |
| E3 | PI12 | bidirectional | GPIO Port I pin 12, 5V tolerant I/O for LCD_HSYNC, EVENTOUT |
| E4 | PI9 | bidirectional | GPIO Port I pin 9, 5V tolerant I/O for CAN1_RX, FMC_D30, LCD_VSYNC, EVENTOUT |
| E5 | PDR_ON | input | Power down reset control input pin |
| E6 | BOOT0 | input | Boot pin with internal pull-down, VPP alternate function for programming |
| E7 | VDD | power_in | 3.3V main supply pin |
| E8 | VDD | power_in | 3.3V main supply pin |
| E9 | VDD | power_in | 3.3V main supply pin |
| F1 | PC15/OSC32_OUT | bidirectional | GPIO Port C pin 15 OSC32_OUT, 5V tolerant I/O with power switch, alternate functions: EVENTOUT, OSC32_OUT |
| F2 | VSS | power_in | Ground return pin |
| F3 | PI11 | bidirectional | GPIO Port I pin 11, 5V tolerant I/O for OTG_HS_ULPI_DIR, EVENTOUT |
| F4 | VDD | power_in | 3.3V main supply pin |
| F5 | VDD | power_in | 3.3V main supply pin |
| F6 | VSS | power_in | Ground return pin |
| F7 | VSS | power_in | Ground return pin |
| F8 | VSS | power_in | Ground return pin |
| F9 | VSS | power_in | Ground return pin |
| G1 | PH0/OSC_IN | bidirectional | GPIO Port H pin 0 OSC_IN, 5V tolerant I/O, alternate functions: EVENTOUT, OSC_IN |
| G2 | PF2 | bidirectional | GPIO Port F pin 2, 5V tolerant I/O for I2C2_SMBA, FMC_A2, EVENTOUT, additional function ADC3_IN4 |
| G3 | PI13 | bidirectional | GPIO Port I pin 13, 5V tolerant I/O for LCD_VSYNC, EVENTOUT |
| G4 | PI15 | bidirectional | GPIO Port I pin 15, 5V tolerant I/O for LCD_R0, EVENTOUT |
| G5 | VDD | power_in | 3.3V main supply pin |
| G6 | VSS | power_in | Ground return pin |
| H1 | PH1/OSC_OUT | bidirectional | GPIO Port H pin 1 OSC_OUT, 5V tolerant I/O, alternate functions: EVENTOUT, OSC_OUT |
| H2 | PF3 | bidirectional | GPIO Port F pin 3, 5V tolerant I/O for FMC_A3, EVENTOUT, additional function ADC3_IN9 |
| H3 | PI14 | bidirectional | GPIO Port I pin 14, 5V tolerant I/O for LCD_CLK, EVENTOUT |
| H4 | PH4 | bidirectional | GPIO Port H pin 4, 5V tolerant I/O for I2C2_SCL, OTG_HS_ULPI_NXT, EVENTOUT |
| H5 | VDD | power_in | 3.3V main supply pin |
| H6 | VSS | power_in | Ground return pin |
| J1 | NRST | input | Reset input pin with internal weak pull-up resistor for manual reset or watchdog reset |
| J2 | PF4 | bidirectional | GPIO Port F pin 4, 5V tolerant I/O for FMC_A4, EVENTOUT, additional function ADC3_IN14 |
| J3 | PH5 | bidirectional | GPIO Port H pin 5, 5V tolerant I/O for I2C2_SDA, SPI5_NSS, FMC_SDNWE, EVENTOUT |
| J4 | PH3 | bidirectional | GPIO Port H pin 3, 5V tolerant I/O for ETH_MII_COL, FMC_SDNE0, LCD_R1, EVENTOUT |
| J5 | VDD | power_in | 3.3V main supply pin |
| J6 | VSS | power_in | Ground return pin |
| K1 | PF7 | bidirectional | GPIO Port F pin 7, 5V tolerant I/O for TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT, additional function ADC3_IN5 |
| K2 | PF6 | bidirectional | GPIO Port F pin 6, 5V tolerant I/O for TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT, additional function ADC3_IN4 |
| K3 | PF5 | bidirectional | GPIO Port F pin 5, 5V tolerant I/O for FMC_A5, EVENTOUT, additional function ADC3_IN15 |
| K4 | PH2 | bidirectional | GPIO Port H pin 2, 5V tolerant I/O for ETH_MII_CRS, FMC_SDCKE0, LCD_R0, EVENTOUT |
| K5 | VDD | power_in | 3.3V main supply pin |
| K6 | VSS | power_in | Ground return pin |
| K7 | VSS | power_in | Ground return pin |
| K8 | VSS | power_in | Ground return pin |
| K9 | VSS | power_in | Ground return pin |
| L1 | PF10 | bidirectional | GPIO Port F pin 10, 5V tolerant I/O for FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT, additional function ADC3_IN8 |
| L2 | PF9 | bidirectional | GPIO Port F pin 9, 5V tolerant I/O for SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT, additional function ADC3_IN7 |
| L3 | PF8 | bidirectional | GPIO Port F pin 8, 5V tolerant I/O for SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT, additional function ADC3_IN6 |
| L4 | PC3 | bidirectional | GPIO Port C pin 3, 5V tolerant I/O for SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT, additional function ADC123_IN13 |
| L5 | BYPASS_REG | input | External regulator bypass control input pin for regulator ON/OFF configuration |
| L6 | VSS | power_in | Ground return pin |
| L7 | VDD | power_in | 3.3V main supply pin |
| L8 | VDD | power_in | 3.3V main supply pin |
| L9 | VDD | power_in | 3.3V main supply pin |
| M1 | VSSA | power_in | Analog ground return pin |
| M2 | PC0 | bidirectional | GPIO Port C pin 0, 5V tolerant I/O for OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT, additional function ADC123_IN10 |
| M3 | PC1 | bidirectional | GPIO Port C pin 1, 5V tolerant I/O for ETH_MDC, EVENTOUT, additional function ADC123_IN11 |
| M4 | PC2 | bidirectional | GPIO Port C pin 2, 5V tolerant I/O for SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT, additional function ADC123_IN12 |
| M5 | PB2/BOOT1 | bidirectional | GPIO Port B pin 2 BOOT1, 5V tolerant I/O for EVENTOUT |
| M6 | PF12 | bidirectional | GPIO Port F pin 12, 5V tolerant I/O for FMC_A6, EVENTOUT |
| M7 | PG1 | bidirectional | GPIO Port G pin 1, 5V tolerant I/O for FMC_A11, EVENTOUT |
| M8 | PF15 | bidirectional | GPIO Port F pin 15, 5V tolerant I/O for FMC_A9, EVENTOUT |
| M9 | PJ4 | bidirectional | GPIO Port J pin 4, 5V tolerant I/O for LCD_R5, EVENTOUT |
| N1 | VREF- | power_in | Analog reference negative voltage pin for ADC |
| N2 | PA1 | bidirectional | GPIO Port A pin 1, 5V tolerant I/O for TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT, additional function ADC123_IN1 |
| N3 | PA0/WKUP | bidirectional | GPIO Port A pin 0 WKUP, 5V tolerant I/O for TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, EVENTOUT, additional function ADC123_IN0/WKUP |
| N4 | PA4 | bidirectional | GPIO Port A pin 4, 3.3V tolerant I/O for SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT, additional function ADC12_IN4/DAC_OUT1 |
| N5 | PC4 | bidirectional | GPIO Port C pin 4, 5V tolerant I/O for ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT, additional function ADC12_IN14 |
| N6 | PF13 | bidirectional | GPIO Port F pin 13, 5V tolerant I/O for FMC_A7, EVENTOUT |
| N7 | PG0 | bidirectional | GPIO Port G pin 0, 5V tolerant I/O for FMC_A10, EVENTOUT |
| N8 | PJ3 | bidirectional | GPIO Port J pin 3, 5V tolerant I/O for LCD_R4, EVENTOUT |
| N9 | PE8 | bidirectional | GPIO Port E pin 8, 5V tolerant I/O for TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT |
| P1 | VREF+ | power_in | Analog reference positive voltage pin for ADC, connect to VDDA or separate reference |
| P2 | PA2 | bidirectional | GPIO Port A pin 2, 5V tolerant I/O for TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT, additional function ADC123_IN2 |
| P3 | PA6 | bidirectional | GPIO Port A pin 6, 5V tolerant I/O for TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT, additional function ADC12_IN6 |
| P4 | PA5 | bidirectional | GPIO Port A pin 5, 3.3V tolerant I/O for TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT, additional function ADC12_IN5/DAC_OUT2 |
| P5 | PC5 | bidirectional | GPIO Port C pin 5, 5V tolerant I/O for ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT, additional function ADC12_IN15 |
| P6 | PF14 | bidirectional | GPIO Port F pin 14, 5V tolerant I/O for FMC_A8, EVENTOUT |
| P7 | PJ2 | bidirectional | GPIO Port J pin 2, 5V tolerant I/O for LCD_R3, EVENTOUT |
| P8 | PF11 | bidirectional | GPIO Port F pin 11, 5V tolerant I/O for SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT |
| P9 | PE9 | bidirectional | GPIO Port E pin 9, 5V tolerant I/O for TIM1_CH1, FMC_D6, EVENTOUT |
| R1 | VDDA | power_in | Analog power supply pin 1.8V to 3.6V for ADC, DAC, and analog circuits |
| R2 | PA3 | bidirectional | GPIO Port A pin 3, 5V tolerant I/O for TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT, additional function ADC123_IN3 |
| R3 | PA7 | bidirectional | GPIO Port A pin 7, 5V tolerant I/O for TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT, additional function ADC12_IN7 |
| R4 | PB1 | bidirectional | GPIO Port B pin 1, 5V tolerant I/O for TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT, additional function ADC12_IN9 |
| R5 | PB0 | bidirectional | GPIO Port B pin 0, 5V tolerant I/O for TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT, additional function ADC12_IN8 |
| R6 | PJ0 | bidirectional | GPIO Port J pin 0, 5V tolerant I/O for LCD_R1, EVENTOUT |
| R7 | PJ1 | bidirectional | GPIO Port J pin 1, 5V tolerant I/O for LCD_R2, EVENTOUT |
| R8 | PE7 | bidirectional | GPIO Port E pin 7, 5V tolerant I/O for TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT |
| R9 | PE10 | bidirectional | GPIO Port E pin 10, 5V tolerant I/O for TIM1_CH2N, FMC_D7, EVENTOUT |
| A10 | PB3 | bidirectional | |
| A11 | PD7 | bidirectional | |
| A12 | PC12 | bidirectional | |
| A13 | PA15 | bidirectional | |
| A14 | PA14 | bidirectional | |
| A15 | PA13 | bidirectional | |
| B10 | PJ12 | bidirectional | |
| B11 | PD6 | bidirectional | |
| B12 | PD0 | bidirectional | |
| B13 | PC11 | bidirectional | |
| B14 | PC10 | bidirectional | |
| B15 | PA12 | bidirectional | |
| C10 | PD5 | bidirectional | |
| C11 | PD3 | bidirectional | |
| C12 | PD1 | bidirectional | |
| C13 | PI3 | bidirectional | |
| C14 | PI2 | bidirectional | |
| C15 | PA11 | bidirectional | |
| D10 | PJ15 | bidirectional | |
| D11 | PD4 | bidirectional | |
| D12 | PD2 | bidirectional | |
| D13 | PH15 | bidirectional | |
| D14 | PI1 | bidirectional | |
| D15 | PA10 | bidirectional | |
| E10 | VDD | power_in | 3.3V main supply pin |
| E11 | VCAP_2 | power_in | External capacitor pin for on-chip regulator, 1µF capacitor required |
| E12 | PH13 | bidirectional | GPIO Port H pin 13, 5V tolerant I/O for TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2, EVENTOUT |
| E13 | PH14 | bidirectional | GPIO Port H pin 14, 5V tolerant I/O for TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3, EVENTOUT |
| E14 | PI0 | bidirectional | GPIO Port I pin 0, 5V tolerant I/O for TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, EVENTOUT |
| E15 | PA9 | bidirectional | GPIO Port A pin 9, 5V tolerant I/O for TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, additional function OTG_FS_VBUS |
| F10 | VSS | power_in | Ground return pin |
| F11 | VDD | power_in | 3.3V main supply pin |
| F12 | PK1 | bidirectional | GPIO Port K pin 1, 5V tolerant I/O for LCD_G6, EVENTOUT |
| F13 | PK2 | bidirectional | GPIO Port K pin 2, 5V tolerant I/O for LCD_G7, EVENTOUT |
| F14 | PC9 | bidirectional | GPIO Port C pin 9, 5V tolerant I/O for MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT |
| F15 | PA8 | bidirectional | GPIO Port A pin 8, 5V tolerant I/O for MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT |
| G10 | VSS | power_in | Ground return pin |
| G11 | VDD | power_in | 3.3V main supply pin |
| G12 | PJ11 | bidirectional | GPIO Port J pin 11, 5V tolerant I/O for LCD_G4, EVENTOUT |
| G13 | PK0 | bidirectional | GPIO Port K pin 0, 5V tolerant I/O for LCD_G5, EVENTOUT |
| G14 | PC8 | bidirectional | GPIO Port C pin 8, 5V tolerant I/O for TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT |
| G15 | PC7 | bidirectional | GPIO Port C pin 7, 5V tolerant I/O for TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT |
| H10 | VSS | power_in | Ground return pin |
| H11 | VDD | power_in | 3.3V main supply pin |
| H12 | PJ8 | bidirectional | GPIO Port J pin 8, 5V tolerant I/O for LCD_G1, EVENTOUT |
| H13 | PJ10 | bidirectional | GPIO Port J pin 10, 5V tolerant I/O for LCD_G3, EVENTOUT |
| H14 | PG8 | bidirectional | GPIO Port G pin 8, 5V tolerant I/O for SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT |
| H15 | PC6 | bidirectional | GPIO Port C pin 6, 5V tolerant I/O for TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT |
| J10 | VSS | power_in | Ground return pin |
| J11 | VDD | power_in | 3.3V main supply pin |
| J12 | PJ7 | bidirectional | GPIO Port J pin 7, 5V tolerant I/O for LCD_G0, EVENTOUT |
| J13 | PJ9 | bidirectional | GPIO Port J pin 9, 5V tolerant I/O for LCD_G2, EVENTOUT |
| J14 | PG7 | bidirectional | GPIO Port G pin 7, 5V tolerant I/O for USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT |
| J15 | PG6 | bidirectional | GPIO Port G pin 6, 5V tolerant I/O for FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT |
| K10 | VSS | power_in | Ground return pin |
| K11 | VDD | power_in | 3.3V main supply pin |
| K12 | PJ6 | bidirectional | GPIO Port J pin 6, 5V tolerant I/O for LCD_R7, EVENTOUT |
| K13 | PD15 | bidirectional | GPIO Port D pin 15, 5V tolerant I/O for TIM4_CH4, FMC_D1, EVENTOUT |
| K14 | PB13 | bidirectional | GPIO Port B pin 13, 5V tolerant I/O for TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, additional function OTG_HS_VBUS |
| K15 | PD10 | bidirectional | GPIO Port D pin 10, 5V tolerant I/O for USART3_CK, FMC_D15, LCD_B3, EVENTOUT |
| L10 | VDD | power_in | 3.3V main supply pin |
| L11 | VCAP_1 | power_in | External capacitor pin for on-chip regulator, 1µF capacitor required |
| L12 | PD14 | bidirectional | GPIO Port D pin 14, 5V tolerant I/O for TIM4_CH3, FMC_D0, EVENTOUT |
| L13 | PB12 | bidirectional | GPIO Port B pin 12, 5V tolerant I/O for TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT |
| L14 | PD9 | bidirectional | GPIO Port D pin 9, 5V tolerant I/O for USART3_RX, FMC_D14, EVENTOUT |
| L15 | PD8 | bidirectional | GPIO Port D pin 8, 5V tolerant I/O for USART3_TX, FMC_D13, EVENTOUT |
| M10 | PD12 | bidirectional | GPIO Port D pin 12, 5V tolerant I/O for TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT |
| M11 | PD13 | bidirectional | |
| M12 | PG3 | bidirectional | GPIO Port G pin 3, 5V tolerant I/O for FMC_A13, EVENTOUT |
| M13 | PG2 | bidirectional | GPIO Port G pin 2, 5V tolerant I/O for FMC_A12, EVENTOUT |
| M14 | PJ5 | bidirectional | GPIO Port J pin 5, 5V tolerant I/O for LCD_R6, EVENTOUT |
| M15 | PH12 | bidirectional | GPIO Port H pin 12, 5V tolerant I/O for TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6, EVENTOUT |
| N10 | PD11 | bidirectional | GPIO Port D pin 11, 5V tolerant I/O for USART3_CTS, FMC_A16, EVENTOUT |
| N11 | PG5 | bidirectional | GPIO Port G pin 5, 5V tolerant I/O for FMC_A15/FMC_BA1, EVENTOUT |
| N12 | PG4 | bidirectional | GPIO Port G pin 4, 5V tolerant I/O for FMC_A14/FMC_BA0, EVENTOUT |
| N13 | PH7 | bidirectional | GPIO Port H pin 7, 5V tolerant I/O for I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, EVENTOUT |
| N14 | PH9 | bidirectional | GPIO Port H pin 9, 5V tolerant I/O for I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, EVENTOUT |
| N15 | PH11 | bidirectional | GPIO Port H pin 11, 5V tolerant I/O for TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5, EVENTOUT |
| P10 | PE11 | bidirectional | GPIO Port E pin 11, 5V tolerant I/O for TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT |
| P11 | PE14 | bidirectional | GPIO Port E pin 14, 5V tolerant I/O for TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT |
| P12 | PB10 | bidirectional | GPIO Port B pin 10, 5V tolerant I/O for TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT |
| P13 | PH6 | bidirectional | GPIO Port H pin 6, 5V tolerant I/O for I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, EVENTOUT |
| P14 | PH8 | bidirectional | GPIO Port H pin 8, 5V tolerant I/O for I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, EVENTOUT |
| P15 | PH10 | bidirectional | GPIO Port H pin 10, 5V tolerant I/O for TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4, EVENTOUT |
| R10 | PE12 | bidirectional | GPIO Port E pin 12, 5V tolerant I/O for TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT |
| R11 | PE15 | bidirectional | GPIO Port E pin 15, 5V tolerant I/O for TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT |
| R12 | PE13 | bidirectional | GPIO Port E pin 13, 5V tolerant I/O for TIM1_CH3N, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT |
| R13 | PB11 | bidirectional | GPIO Port B pin 11, 5V tolerant I/O for TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT |
| R14 | PB14 | bidirectional | GPIO Port B pin 14, 5V tolerant I/O for TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT |
| R15 | PB15 | bidirectional | GPIO Port B pin 15, 5V tolerant I/O for RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TFBGA-216 |
| Category | Embedded Processors & Controllers |
| Pins | 216 |
CAD (KiCad official)
- Symbol:
STM32F429NIH6 - Footprint:
Package_BGA:TFBGA-216_13x13mm_Layout15x15_P0.8mm - 3D model: TFBGA-216 (KiCad packages3D, STEP)
- 3D model files:
stm32f429nih6-etched.step/stm32f429nih6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f429nih6.step/stm32f429nih6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (240 pp, sha256
403f3cc921d85d31, retrieved 2026-09-29, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).