Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F429IET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)

STM32F429IET6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional FT I/O port E2 with alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23, EVENTOUT.
2 PE3 bidirectional FT I/O port E3 with alternate functions TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT.
3 PE4 bidirectional FT I/O port E4 with alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT.
4 PE5 bidirectional FT I/O port E5 with alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT.
5 PE6 bidirectional FT I/O port E6 with alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT.
6 VBAT power_in Backup supply of 1.65 to 3.6 V for the RTC, 32 kHz oscillator and backup registers when VDD is absent.
7 PI8 bidirectional FT I/O port I8 (EVENTOUT, TAMP_2) powered through the backup power switch; as output limited to 2 MHz, 30 pF, max 3 mA, cannot source current.
8 PC13 bidirectional FT I/O port C13 (EVENTOUT, TAMP_1) powered through the backup power switch; as output limited to 2 MHz, 30 pF, max 3 mA, cannot source current.
9 PC14-OSC32_IN bidirectional I/O PC14 or 32 kHz oscillator input OSC32_IN, powered through the backup power switch; output limited to 2 MHz, 30 pF, max 3 mA.
10 PC15-OSC32_OUT bidirectional I/O PC15 or 32 kHz oscillator output OSC32_OUT, powered through the backup power switch; output limited to 2 MHz, 30 pF, max 3 mA.
11 PI9 bidirectional FT I/O port I9 with alternate functions CAN1_RX, FMC_D30, LCD_VSYNC, EVENTOUT.
12 PI10 bidirectional FT I/O port I10 with alternate functions ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, EVENTOUT.
13 PI11 bidirectional FT I/O port I11 with alternate functions OTG_HS_ULPI_DIR, EVENTOUT.
14 VSS power_in Ground supply pin.
15 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
16 PF0 bidirectional FT I/O port F0 with alternate functions I2C2_SDA, FMC_A0, EVENTOUT.
17 PF1 bidirectional FT I/O port F1 with alternate functions I2C2_SCL, FMC_A1, EVENTOUT.
18 PF2 bidirectional FT I/O port F2 with alternate functions I2C2_SMBA, FMC_A2, EVENTOUT.
19 PF3 bidirectional FT I/O port F3 with alternate functions FMC_A3, EVENTOUT and analog ADC3_IN9.
20 PF4 bidirectional FT I/O port F4 with alternate functions FMC_A4, EVENTOUT and analog ADC3_IN14.
21 PF5 bidirectional FT I/O port F5 with alternate functions FMC_A5, EVENTOUT and analog ADC3_IN15.
22 VSS power_in Ground supply pin.
23 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
24 PF6 bidirectional FT I/O port F6 with TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT and analog ADC3_IN4.
25 PF7 bidirectional FT I/O port F7 with TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT and analog ADC3_IN5.
26 PF8 bidirectional FT I/O port F8 with SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT and analog ADC3_IN6.
27 PF9 bidirectional FT I/O port F9 with SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT and analog ADC3_IN7.
28 PF10 bidirectional FT I/O port F10 with FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT and analog ADC3_IN8.
29 PH0-OSC_IN bidirectional I/O PH0 or HSE oscillator input OSC_IN (4-26 MHz crystal), with EVENTOUT.
30 PH1-OSC_OUT bidirectional I/O PH1 or HSE oscillator output OSC_OUT, with EVENTOUT.
31 NRST bidirectional Bidirectional reset pin with weak pull-up resistor.
32 PC0 bidirectional FT I/O port C0 with OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT and analog ADC123_IN10.
33 PC1 bidirectional FT I/O port C1 with ETH_MDC, EVENTOUT and analog ADC123_IN11.
34 PC2 bidirectional FT I/O port C2 with SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT and analog ADC123_IN12.
35 PC3 bidirectional FT I/O port C3 with SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT and analog ADC123_IN13.
36 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
37 VSSA power_in Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS.
38 VREF+ power_in ADC/DAC positive reference voltage, 1.7 to 3.6 V, with VREF+ <= VDDA.
39 VDDA power_in Analog supply of 1.7 to 3.6 V for ADC, DAC, reset block, RC and PLL; must be connected to VDD.
40 PA0-WKUP bidirectional FT I/O PA0 with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, WKUP and ADC123_IN0; acts as internal reset (active low) when BYPASS_REG is tied to VDD.
41 PA1 bidirectional FT I/O port A1 with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT and ADC123_IN1.
42 PA2 bidirectional FT I/O port A2 with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT and ADC123_IN2.
43 PH2 bidirectional FT I/O port H2 with ETH_MII_CRS, FMC_SDCKE0, LCD_R0, EVENTOUT.
44 PH3 bidirectional FT I/O port H3 with ETH_MII_COL, FMC_SDNE0, LCD_R1, EVENTOUT.
45 PH4 bidirectional FT I/O port H4 with I2C2_SCL, OTG_HS_ULPI_NXT, EVENTOUT.
46 PH5 bidirectional FT I/O port H5 with I2C2_SDA, SPI5_NSS, FMC_SDNWE, EVENTOUT.
47 PA3 bidirectional FT I/O port A3 with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT and ADC123_IN3.
48 BYPASS_REG input FT input that disables the internal voltage regulator when held high and enables it when held low.
49 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
50 PA4 bidirectional TTa I/O port A4 with SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT, ADC12_IN4 and DAC_OUT1.
51 PA5 bidirectional TTa I/O port A5 with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT, ADC12_IN5 and DAC_OUT2.
52 PA6 bidirectional FT I/O port A6 with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT and ADC12_IN6.
53 PA7 bidirectional FT I/O port A7 with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT and ADC12_IN7.
54 PC4 bidirectional FT I/O port C4 with ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT and ADC12_IN14.
55 PC5 bidirectional FT I/O port C5 with ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT and ADC12_IN15.
56 PB0 bidirectional FT I/O port B0 with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT and ADC12_IN8.
57 PB1 bidirectional FT I/O port B1 with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT and ADC12_IN9.
58 PB2-BOOT1 bidirectional FT I/O PB2 that also serves as BOOT1 boot selection, with EVENTOUT.
59 PF11 bidirectional FT I/O port F11 with SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT.
60 PF12 bidirectional FT I/O port F12 with FMC_A6, EVENTOUT.
61 VSS power_in Ground supply pin.
62 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
63 PF13 bidirectional FT I/O port F13 with FMC_A7, EVENTOUT.
64 PF14 bidirectional FT I/O port F14 with FMC_A8, EVENTOUT.
65 PF15 bidirectional FT I/O port F15 with FMC_A9, EVENTOUT.
66 PG0 bidirectional FT I/O port G0 with FMC_A10, EVENTOUT.
67 PG1 bidirectional FT I/O port G1 with FMC_A11, EVENTOUT.
68 PE7 bidirectional FT I/O port E7 with TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT.
69 PE8 bidirectional FT I/O port E8 with TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT.
70 PE9 bidirectional FT I/O port E9 with TIM1_CH1, FMC_D6, EVENTOUT.
71 VSS power_in Ground supply pin.
72 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
73 PE10 bidirectional FT I/O port E10 with TIM1_CH2N, FMC_D7, EVENTOUT.
74 PE11 bidirectional FT I/O port E11 with TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT.
75 PE12 bidirectional FT I/O port E12 with TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT.
76 PE13 bidirectional FT I/O port E13 with TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT.
77 PE14 bidirectional FT I/O port E14 with TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT.
78 PE15 bidirectional FT I/O port E15 with TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT.
79 PB10 bidirectional FT I/O port B10 with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT.
80 PB11 bidirectional FT I/O port B11 with TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT.
81 VCAP_1 passive Regulator output pin requiring an external 2.2 uF ceramic capacitor with ESR < 2 ohm (100 nF when regulator is off).
82 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
83 PH6 bidirectional FT I/O port H6 with I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, EVENTOUT.
84 PH7 bidirectional FT I/O port H7 with I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, EVENTOUT.
85 PH8 bidirectional FT I/O port H8 with I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, EVENTOUT.
86 PH9 bidirectional FT I/O port H9 with I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, EVENTOUT.
87 PH10 bidirectional FT I/O port H10 with TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4, EVENTOUT.
88 PH11 bidirectional FT I/O port H11 with TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5, EVENTOUT.
89 PH12 bidirectional FT I/O port H12 with TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6, EVENTOUT.
90 VSS power_in Ground supply pin.
91 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
92 PB12 bidirectional FT I/O port B12 with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT.
93 PB13 bidirectional FT I/O port B13 with TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, EVENTOUT and OTG_HS_VBUS.
94 PB14 bidirectional FT I/O port B14 with TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT.
95 PB15 bidirectional FT I/O port B15 with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT.
96 PD8 bidirectional FT I/O port D8 with USART3_TX, FMC_D13, EVENTOUT.
97 PD9 bidirectional FT I/O port D9 with USART3_RX, FMC_D14, EVENTOUT.
98 PD10 bidirectional FT I/O port D10 with USART3_CK, FMC_D15, LCD_B3, EVENTOUT.
99 PD11 bidirectional FT I/O port D11 with USART3_CTS, FMC_A16, EVENTOUT.
100 PD12 bidirectional FT I/O port D12 with TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT.
101 PD13 bidirectional FT I/O port D13 with TIM4_CH2, FMC_A18, EVENTOUT.
102 VSS power_in Ground supply pin.
103 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
104 PD14 bidirectional FT I/O port D14 with TIM4_CH3, FMC_D0, EVENTOUT.
105 PD15 bidirectional FT I/O port D15 with TIM4_CH4, FMC_D1, EVENTOUT.
106 PG2 bidirectional FT I/O port G2 with FMC_A12, EVENTOUT.
107 PG3 bidirectional FT I/O port G3 with FMC_A13, EVENTOUT.
108 PG4 bidirectional FT I/O port G4 with FMC_A14/FMC_BA0, EVENTOUT.
109 PG5 bidirectional FT I/O port G5 with FMC_A15/FMC_BA1, EVENTOUT.
110 PG6 bidirectional FT I/O port G6 with FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT.
111 PG7 bidirectional FT I/O port G7 with USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT.
112 PG8 bidirectional FT I/O port G8 with SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT.
113 VSS power_in Ground supply pin.
114 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
115 PC6 bidirectional FT I/O port C6 with TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT.
116 PC7 bidirectional FT I/O port C7 with TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT.
117 PC8 bidirectional FT I/O port C8 with TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT.
118 PC9 bidirectional FT I/O port C9 with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT.
119 PA8 bidirectional FT I/O port A8 with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT.
120 PA9 bidirectional FT I/O port A9 with TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT and OTG_FS_VBUS.
121 PA10 bidirectional FT I/O port A10 with TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT.
122 PA11 bidirectional FT I/O port A11 with TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM, EVENTOUT.
123 PA12 bidirectional FT I/O port A12 with TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP, EVENTOUT.
124 PA13 bidirectional FT I/O that is JTMS-SWDIO after reset, with EVENTOUT.
125 VCAP_2 passive Regulator output pin requiring an external 2.2 uF ceramic capacitor with ESR < 2 ohm (100 nF when regulator is off).
126 VSS power_in Ground supply pin.
127 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
128 PH13 bidirectional FT I/O port H13 with TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2, EVENTOUT.
129 PH14 bidirectional FT I/O port H14 with TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3, EVENTOUT.
130 PH15 bidirectional FT I/O port H15 with TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, EVENTOUT.
131 PI0 bidirectional FT I/O port I0 with TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, EVENTOUT; cannot be used for I2S2 full-duplex mode.
132 PI1 bidirectional FT I/O port I1 with SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, EVENTOUT; cannot be used for I2S2 full-duplex mode.
133 PI2 bidirectional FT I/O port I2 with TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7, EVENTOUT.
134 PI3 bidirectional FT I/O port I3 with TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, EVENTOUT.
135 VSS power_in Ground supply pin.
136 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
137 PA14 bidirectional FT I/O that is JTCK-SWCLK after reset, with EVENTOUT.
138 PA15 bidirectional FT I/O that is JTDI after reset, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, EVENTOUT.
139 PC10 bidirectional FT I/O port C10 with SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2, EVENTOUT.
140 PC11 bidirectional FT I/O port C11 with I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4, EVENTOUT.
141 PC12 bidirectional FT I/O port C12 with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9, EVENTOUT.
142 PD0 bidirectional FT I/O port D0 with CAN1_RX, FMC_D2, EVENTOUT.
143 PD1 bidirectional FT I/O port D1 with CAN1_TX, FMC_D3, EVENTOUT.
144 PD2 bidirectional FT I/O port D2 with TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT.
145 PD3 bidirectional FT I/O port D3 with SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT.
146 PD4 bidirectional FT I/O port D4 with USART2_RTS, FMC_NOE, EVENTOUT.
147 PD5 bidirectional FT I/O port D5 with USART2_TX, FMC_NWE, EVENTOUT.
148 VSS power_in Ground supply pin.
149 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
150 PD6 bidirectional FT I/O port D6 with SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT.
151 PD7 bidirectional FT I/O port D7 with USART2_CK, FMC_NE1/FMC_NCE2, EVENTOUT.
152 PG9 bidirectional FT I/O port G9 with USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only), EVENTOUT.
153 PG10 bidirectional FT I/O port G10 with LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2, EVENTOUT.
154 PG11 bidirectional FT I/O port G11 with ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3, EVENTOUT.
155 PG12 bidirectional FT I/O port G12 with SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1, EVENTOUT.
156 PG13 bidirectional FT I/O port G13 with SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, EVENTOUT.
157 PG14 bidirectional FT I/O port G14 with SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, EVENTOUT.
158 VSS power_in Ground supply pin.
159 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
160 PG15 bidirectional FT I/O port G15 with USART6_CTS, FMC_SDNCAS, DCMI_D13, EVENTOUT.
161 PB3 bidirectional FT I/O that is JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, EVENTOUT.
162 PB4 bidirectional FT I/O that is NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, EVENTOUT.
163 PB5 bidirectional FT I/O port B5 with TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT.
164 PB6 bidirectional FT I/O port B6 with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5, EVENTOUT.
165 PB7 bidirectional FT I/O port B7 with TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT.
166 BOOT0 input Dedicated boot mode selection pin (also VPP for Flash programming); input voltage up to 9 V.
167 PB8 bidirectional FT I/O port B8 with TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6, EVENTOUT.
168 PB9 bidirectional FT I/O port B9 with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7, EVENTOUT.
169 PE0 bidirectional FT I/O port E0 with TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2, EVENTOUT.
170 PE1 bidirectional FT I/O port E1 with UART8_Tx, FMC_NBL1, DCMI_D3, EVENTOUT.
171 PDR_ON input Enables the power supply supervisor (POR/PDR) when held high; connect to an external supervisor to disable internal reset.
172 VDD power_in Digital supply pin, 1.7 to 3.6 V for I/O and internal regulator.
173 PI4 bidirectional FT I/O port I4 with TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4, EVENTOUT.
174 PI5 bidirectional FT I/O port I5 with TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5, EVENTOUT.
175 PI6 bidirectional FT I/O port I6 with TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6, EVENTOUT.
176 PI7 bidirectional FT I/O port I7 with TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7, EVENTOUT.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-176(24x24)
Category Embedded Processors & Controllers
Pins 176

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal AHB clock frequency fHCLK 0 180 MHz Power level 1 (VOS=0x11), regulator ON, overdrive ON 93
Internal APB1 clock frequency fPCLK1 0 45 MHz Overdrive ON 93
Internal APB2 clock frequency fPCLK2 0 90 MHz Overdrive ON 93
Standard operating voltage VDD 1.7 3.6 V 94
Analog operating voltage VDDA 1.7 2.4 V ADC limited to 1.2 Msps 94
Analog operating voltage VDDA 2.4 3.6 V ADC limited to 2.4 Msps 94
Backup operating voltage VBAT 1.65 3.6 V 94
Internal regulator output 1.2 V V12 1.08 1.14 1.2 V Regulator ON, VCAP_1/VCAP_2, power level 3 (VOS=0x01), 120 MHz HCLK max 94
Internal regulator output 1.2 V V12 1.26 1.32 1.4 V Regulator ON, VCAP_1/VCAP_2, power level 1 (VOS=0x11), HCLK max 168 MHz overdrive OFF / 180 MHz overdrive ON 94
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 94
Input voltage on RST and FT pins VIN -0.3 5.2 V VDD ≤ 2 V 94
Input voltage on BOOT0 pin VIN 0 9 V 94
Power dissipation LQFP176 PD 526 mΩ TA = 85 °C (suffix 6) or 105 °C (suffix 7) 94
Ambient temperature, suffix 6, maximum power dissipation TA -40 85 °C Suffix 6 version 94
Ambient temperature, suffix 6, low power dissipation TA -40 105 °C Suffix 6 version, low power dissipation 94
Junction temperature range, suffix 6 TJ -40 105 °C Suffix 6 version 95
External supply voltage VDD-VSS VDD-VSS -0.3 4 V Includes VDDA, VDD and VBAT 91
Input voltage on TTa pin VIN -0.3 4 V 91
Input voltage on any other pin VIN -0.3 4 V 91
Input voltage on BOOT0 pin VIN 0 9 V 91
Voltage variation between different VDD power pins ΔVDDx 50 mV 91
Total current into all VDD_x supply lines ΣIVDD 270 mA Source current 92
Total current out of all VSS_x ground lines ΣIVSS -270 mA Sink current 92
Maximum current into each VDD_x supply line IVDD 100 mA Source current 92
Maximum current out of each VSS_x ground line IVSS -100 mA Sink current 92
Output sink current, any I/O and control pin IIO 25 mA 92
Output source current, any I/O and control pin IIO -25 mA 92
Total output sink current, all I/O and control pins ΣIIO 120 mA 92
Total output source current, all I/O and control pins ΣIIO -120 mA 92
Injection current on FT pins IINJ(PIN) -5 0 mA 92
Injection current on TTa pins IINJ(PIN) -5 5 mA 92
Total injection current, all I/O and control pins ΣIINJ(PIN) -25 25 mA 92
Storage temperature range TSTG -65 150 °C 92
Maximum junction temperature TJ 125 °C 92
HSE oscillator frequency fOSC_IN 4 26 MHz Crystal/ceramic resonator 118
User external clock source frequency (HSE) fHSE_ext 1 50 MHz Bypass mode 116
HSE accuracy ACCHSE -500 500 ppm Depends on crystal used 118
HSI accuracy, user-trimmed ACCHSI 1 % Adjusted by user via RCC_CR 120
HSI accuracy, factory-calibrated ACCHSI -8 4.5 % TA = -40 to 105 °C 120
HSI accuracy, factory-calibrated ACCHSI -4 4 % TA = -10 to 85 °C 120
HSI accuracy, factory-calibrated ACCHSI -1 1 % TA = 25 °C 120
LSI oscillator frequency fLSI 17 32 47 kHz 120
POR/PDR threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V Falling edge 97
POR/PDR threshold, rising edge VPOR/PDR 1.64 1.72 1.8 V Rising edge 97
BOR level 1 threshold, falling edge VBOR1 2.13 2.19 2.24 V Falling edge 97
BOR level 1 threshold, rising edge VBOR1 2.23 2.29 2.33 V Rising edge 97
Weak pull-up equivalent resistor on I/O RPU 30 40 50 kΩ VIN = VSS, except PA10/PB12 132
Weak pull-down equivalent resistor on I/O RPD 30 40 50 kΩ VIN = VDD, except PA10/PB12 132
NRST weak pull-up equivalent resistor RPU 30 40 50 kΩ VIN = VSS 136
NRST input non-filtered pulse VNF(NRST) 300 ns VDD > 2.7 V 136
NRST input filtered pulse VF(NRST) 100 ns 136
Output low voltage, CMOS port VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
Flash endurance NEND 10 千次 TA = -40 to +85 °C (suffix 6) 128
ADC clock frequency fADC 0.6 15 18 MHz VDDA = 1.7 to 2.4 V 153
ADC clock frequency fADC 0.6 30 36 MHz VDDA = 2.4 to 3.6 V 153
Total unadjusted error at fADC=30 MHz ET 2 5 LSB fADC=30 MHz, RAIN<10 kΩ, VDDA=2.4 to 3.6 V 155
Internal reference voltage VREFINT 1.18 1.21 1.24 V -40 °C < TA < +105 °C 159
Internal reference voltage temperature coefficient TCoeff 30 50 ppm/°C 159
Temperature sensor linearity vs temperature TL -2 2 °C VSENSE linearity with temperature 159
Temperature sensor average slope Avg_Slope 2.5 mV/°C 159
Temperature sensor voltage at 25 °C V25 0.76 V 159
DAC analog supply voltage VDDA 1.7 3.6 V 160
USB OTG FS transceiver operating voltage VDD 3 3.6 V USB OTG FS transceiver operation 147
Ethernet operating voltage VDD 2.7 3.6 V Ethernet DC electrical characteristics 151

CAD (KiCad official)

  • Symbol: STM32F429IET6
  • Footprint: Package_QFP:LQFP-176_24x24mm_P0.5mm
  • 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
  • 3D model files: stm32f429iet6-etched.step / stm32f429iet6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f429iet6.step / stm32f429iet6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (226 pp, sha256 9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF