main
History Download
Ray Publish 0.1.0 f9bff4f

STM32F427ZGT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-144(20x20)

STM32F427ZGT6 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional FT I/O; alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23, EVENTOUT.
2 PE3 bidirectional FT I/O; alternate functions TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT.
3 PE4 bidirectional FT I/O; alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT.
4 PE5 bidirectional FT I/O; alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT.
5 PE6 bidirectional FT I/O; alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT.
6 VBAT power_in Backup supply for RTC, 32 kHz oscillator and backup registers/SRAM, 1.65 to 3.6 V when VDD is absent; connect to VDD when PDR_ON is not tied to VDD (internal reset OFF).
7 PC13 bidirectional FT I/O powered through the backup switch (3 mA sink limit): output speed max 2 MHz with 30 pF load, cannot drive LEDs; function EVENTOUT, TAMP_1.
8 PC14-OSC32_IN bidirectional I/O powered through the backup switch (3 mA limit, max 2 MHz at 30 pF); LSE oscillator input OSC32_IN, EVENTOUT.
9 PC15-OSC32_OUT bidirectional I/O powered through the backup switch (3 mA limit, max 2 MHz at 30 pF); LSE oscillator output OSC32_OUT, EVENTOUT.
10 PF0 bidirectional FT I/O; alternate functions I2C2_SDA, FMC_A0, EVENTOUT.
11 PF1 bidirectional FT I/O; alternate functions I2C2_SCL, FMC_A1, EVENTOUT.
12 PF2 bidirectional FT I/O; alternate functions I2C2_SMBA, FMC_A2, EVENTOUT.
13 PF3 bidirectional FT I/O; alternate functions FMC_A3, EVENTOUT; analog input ADC3_IN9.
14 PF4 bidirectional FT I/O; alternate functions FMC_A4, EVENTOUT; analog input ADC3_IN14.
15 PF5 bidirectional FT I/O; alternate functions FMC_A5, EVENTOUT; analog input ADC3_IN15.
16 VSS power_in Digital ground.
17 VDD power_in Digital supply, 1.7 to 3.6 V.
18 PF6 bidirectional FT I/O; alternate functions TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT; analog input ADC3_IN4.
19 PF7 bidirectional FT I/O; alternate functions TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT; analog input ADC3_IN5.
20 PF8 bidirectional FT I/O; alternate functions SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT; analog input ADC3_IN6.
21 PF9 bidirectional FT I/O; alternate functions SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT; analog input ADC3_IN7.
22 PF10 bidirectional FT I/O; alternate functions FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT; analog input ADC3_IN8.
23 PH0-OSC_IN bidirectional I/O that is the HSE oscillator input OSC_IN (4 to 26 MHz crystal); also EVENTOUT.
24 PH1-OSC_OUT bidirectional I/O that is the HSE oscillator output OSC_OUT (4 to 26 MHz crystal); also EVENTOUT.
25 NRST bidirectional Bidirectional reset pin with weak pull-up (30 to 50 kΩ); input filtered pulses below 100 ns, pulses above 300 ns (VDD > 2.7 V) not filtered.
26 PC0 bidirectional FT I/O; alternate functions OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; analog input ADC123_IN10.
27 PC1 bidirectional FT I/O; alternate functions ETH_MDC, EVENTOUT; analog input ADC123_IN11.
28 PC2 bidirectional FT I/O; alternate functions SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; analog input ADC123_IN12.
29 PC3 bidirectional FT I/O; alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; analog input ADC123_IN13.
30 VDD power_in Digital supply, 1.7 to 3.6 V.
31 VSSA power_in Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS.
32 VREF+ power_in ADC/DAC positive reference voltage, 1.7 to 3.6 V, with VDDA - VREF+ < 1.2 V.
33 VDDA power_in Analog supply for ADC, DAC, reset block, RC and PLL, 1.7 to 3.6 V; must equal VDD (ADC limited to 1.2 Msps below 2.4 V).
34 PA0-WKUP bidirectional FT I/O; alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, EVENTOUT; ADC123_IN0 and WKUP wake-up input.
35 PA1 bidirectional FT I/O; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT; analog input ADC123_IN1.
36 PA2 bidirectional FT I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT; analog input ADC123_IN2.
37 PA3 bidirectional FT I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; analog input ADC123_IN3.
38 VSS power_in Digital ground.
39 VDD power_in Digital supply, 1.7 to 3.6 V.
40 PA4 bidirectional TTa (3.3 V tolerant) I/O; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; ADC12_IN4 and DAC_OUT1.
41 PA5 bidirectional TTa (3.3 V tolerant) I/O; alternate functions TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT; ADC12_IN5 and DAC_OUT2.
42 PA6 bidirectional FT I/O; alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; analog input ADC12_IN6.
43 PA7 bidirectional FT I/O; alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT; analog input ADC12_IN7.
44 PC4 bidirectional FT I/O; alternate functions ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT; analog input ADC12_IN14.
45 PC5 bidirectional FT I/O; alternate functions ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT; analog input ADC12_IN15.
46 PB0 bidirectional FT I/O; alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; analog input ADC12_IN8.
47 PB1 bidirectional FT I/O; alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; analog input ADC12_IN9.
48 PB2-BOOT1 bidirectional FT I/O that also serves as the BOOT1 boot-mode selection pin; function EVENTOUT.
49 PF11 bidirectional FT I/O; alternate functions SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT.
50 PF12 bidirectional FT I/O; alternate functions FMC_A6, EVENTOUT.
51 VSS power_in Digital ground.
52 VDD power_in Digital supply, 1.7 to 3.6 V.
53 PF13 bidirectional FT I/O; alternate functions FMC_A7, EVENTOUT.
54 PF14 bidirectional FT I/O; alternate functions FMC_A8, EVENTOUT.
55 PF15 bidirectional FT I/O; alternate functions FMC_A9, EVENTOUT.
56 PG0 bidirectional FT I/O; alternate functions FMC_A10, EVENTOUT.
57 PG1 bidirectional FT I/O; alternate functions FMC_A11, EVENTOUT.
58 PE7 bidirectional FT I/O; alternate functions TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT.
59 PE8 bidirectional FT I/O; alternate functions TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT.
60 PE9 bidirectional FT I/O; alternate functions TIM1_CH1, FMC_D6, EVENTOUT.
61 VSS power_in Digital ground.
62 VDD power_in Digital supply, 1.7 to 3.6 V.
63 PE10 bidirectional FT I/O; alternate functions TIM1_CH2N, FMC_D7, EVENTOUT.
64 PE11 bidirectional FT I/O; alternate functions TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT.
65 PE12 bidirectional FT I/O; alternate functions TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT.
66 PE13 bidirectional FT I/O; alternate functions TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT.
67 PE14 bidirectional FT I/O; alternate functions TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT.
68 PE15 bidirectional FT I/O; alternate functions TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT.
69 PB10 bidirectional FT I/O; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT.
70 PB11 bidirectional FT I/O; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT.
71 VCAP_1 passive Main regulator output capacitor pin; connect a 2.2 µF ceramic capacitor with ESR < 2 Ω (100 nF when regulator is bypassed).
72 VDD power_in Digital supply, 1.7 to 3.6 V.
73 PB12 bidirectional FT I/O; alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT.
74 PB13 bidirectional FT I/O; alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, EVENTOUT; OTG_HS_VBUS.
75 PB14 bidirectional FT I/O; alternate functions TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT.
76 PB15 bidirectional FT I/O; alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT.
77 PD8 bidirectional FT I/O; alternate functions USART3_TX, FMC_D13, EVENTOUT.
78 PD9 bidirectional FT I/O; alternate functions USART3_RX, FMC_D14, EVENTOUT.
79 PD10 bidirectional FT I/O; alternate functions USART3_CK, FMC_D15, LCD_B3, EVENTOUT.
80 PD11 bidirectional FT I/O; alternate functions USART3_CTS, FMC_A16, EVENTOUT.
81 PD12 bidirectional FT I/O; alternate functions TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT.
82 PD13 bidirectional FT I/O; alternate functions TIM4_CH2, FMC_A18, EVENTOUT.
83 VSS power_in Digital ground.
84 VDD power_in Digital supply, 1.7 to 3.6 V.
85 PD14 bidirectional FT I/O; alternate functions TIM4_CH3, FMC_D0, EVENTOUT.
86 PD15 bidirectional FT I/O; alternate functions TIM4_CH4, FMC_D1, EVENTOUT.
87 PG2 bidirectional FT I/O; alternate functions FMC_A12, EVENTOUT.
88 PG3 bidirectional FT I/O; alternate functions FMC_A13, EVENTOUT.
89 PG4 bidirectional FT I/O; alternate functions FMC_A14/FMC_BA0, EVENTOUT.
90 PG5 bidirectional FT I/O; alternate functions FMC_A15/FMC_BA1, EVENTOUT.
91 PG6 bidirectional FT I/O; alternate functions FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT.
92 PG7 bidirectional FT I/O; alternate functions USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT.
93 PG8 bidirectional FT I/O; alternate functions SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT.
94 VSS power_in Digital ground.
95 VDD power_in Digital supply, 1.7 to 3.6 V.
96 PC6 bidirectional FT I/O; alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT.
97 PC7 bidirectional FT I/O; alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT.
98 PC8 bidirectional FT I/O; alternate functions TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT.
99 PC9 bidirectional FT I/O; alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT.
100 PA8 bidirectional FT I/O; alternate functions MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT.
101 PA9 bidirectional FT I/O; alternate functions TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT; OTG_FS_VBUS.
102 PA10 bidirectional FT I/O; alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT.
103 PA11 bidirectional FT I/O; alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM, EVENTOUT.
104 PA12 bidirectional FT I/O; alternate functions TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP, EVENTOUT.
105 PA13 (JTMS-SWDIO) bidirectional FT I/O; JTAG TMS / SWD data I/O after reset, also EVENTOUT.
106 VCAP_2 passive Main regulator output capacitor pin; connect a 2.2 µF ceramic capacitor with ESR < 2 Ω (100 nF when regulator is bypassed).
107 VSS power_in Digital ground.
108 VDD power_in Digital supply, 1.7 to 3.6 V.
109 PA14 (JTCK-SWCLK) bidirectional FT I/O; JTAG TCK / SWD clock after reset, also EVENTOUT.
110 PA15 (JTDI) bidirectional FT I/O; JTDI after reset, alternate functions TIM2_CH1/TIM2_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, EVENTOUT.
111 PC10 bidirectional FT I/O; alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2, EVENTOUT.
112 PC11 bidirectional FT I/O; alternate functions I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4, EVENTOUT.
113 PC12 bidirectional FT I/O; alternate functions SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9, EVENTOUT.
114 PD0 bidirectional FT I/O; alternate functions CAN1_RX, FMC_D2, EVENTOUT.
115 PD1 bidirectional FT I/O; alternate functions CAN1_TX, FMC_D3, EVENTOUT.
116 PD2 bidirectional FT I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT.
117 PD3 bidirectional FT I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT.
118 PD4 bidirectional FT I/O; alternate functions USART2_RTS, FMC_NOE, EVENTOUT.
119 PD5 bidirectional FT I/O; alternate functions USART2_TX, FMC_NWE, EVENTOUT.
120 VSS power_in Digital ground.
121 VDD power_in Digital supply, 1.7 to 3.6 V.
122 PD6 bidirectional FT I/O; alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT.
123 PD7 bidirectional FT I/O; alternate functions USART2_CK, FMC_NE1/FMC_NCE2, EVENTOUT.
124 PG9 bidirectional FT I/O; alternate functions USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only), EVENTOUT.
125 PG10 bidirectional FT I/O; alternate functions LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2, EVENTOUT.
126 PG11 bidirectional FT I/O; alternate functions ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3, EVENTOUT.
127 PG12 bidirectional FT I/O; alternate functions SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1, EVENTOUT.
128 PG13 bidirectional FT I/O; alternate functions SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, EVENTOUT.
129 PG14 bidirectional FT I/O; alternate functions SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, EVENTOUT.
130 VSS power_in Digital ground.
131 VDD power_in Digital supply, 1.7 to 3.6 V.
132 PG15 bidirectional FT I/O; alternate functions USART6_CTS, FMC_SDNCAS, DCMI_D13, EVENTOUT.
133 PB3 (JTDO/TRACESWO) bidirectional FT I/O; JTDO/TRACESWO after reset, alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, EVENTOUT.
134 PB4 (NJTRST) bidirectional FT I/O; NJTRST after reset, alternate functions TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, EVENTOUT.
135 PB5 bidirectional FT I/O; alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT.
136 PB6 bidirectional FT I/O; alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5, EVENTOUT.
137 PB7 bidirectional FT I/O; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT.
138 BOOT0 input Dedicated boot-mode selection input; input voltage VSS to 9 V; also VPP for Flash programming (7 to 9 V).
139 PB8 bidirectional FT I/O; alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6, EVENTOUT.
140 PB9 bidirectional FT I/O; alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7, EVENTOUT.
141 PE0 bidirectional FT I/O; alternate functions TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2, EVENTOUT.
142 PE1 bidirectional FT I/O; alternate functions UART8_Tx, FMC_NBL1, DCMI_D3, EVENTOUT.
143 PDR_ON input Enables the internal power-on/power-down reset supervisor when held high (VDD); connect to an external supervisor for internal reset OFF (VDD down to 1.7 V).
144 VDD power_in Digital supply, 1.7 to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-144(20x20)
Category Embedded Processors & Controllers
Pins 144

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Standard operating supply voltage VDD 1.7 3.6 V 94
Analog operating voltage (ADC limited to 1.2 Msps) VDDA 1.7 2.4 V ADC limited to 1.2 Msps; must be equal potential to VDD 94
Analog operating voltage (ADC limited to 2.4 Msps) VDDA 2.4 3.6 V ADC limited to 2.4 Msps 94
Backup operating voltage VBAT 1.65 3.6 V 94
External main supply voltage (VDD-VSS, incl. VDDA, VDD, VBAT) VDD-VSS -0.3 4 V 91
Input voltage on FT and RST pins, 2 V ≤ VDD ≤ 3.6 V VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 94
Input voltage on FT and RST pins, VDD ≤ 2 V VIN -0.3 5.2 V VDD ≤ 2 V 94
Input voltage on BOOT0 pin VIN 0 9 V BOOT0 pin 94
Sum of supply currents into all VDD_x lines (source) ΣIVDD 270 mA 92
Sum of supply currents out of all VSS_x lines (sink) ΣIVSS -270 mA 92
Maximum current into each VDD_x supply line (source) IVDD 100 mA 92
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 92
Output sink current, any I/O and control pin IIO 25 mA Any I/O and control pin, sink 92
Output source current, any I/O and control pin IIO -25 mA Any I/O and control pin, source 92
Total output sink current, all I/O and control pins ΣIIO 120 mA All I/O and control pins, sink 92
Total output source current, all I/O and control pins ΣIIO -120 mA All I/O and control pins, source 92
Storage temperature range TSTG -65 150 °C 92
Maximum junction temperature TJ 125 °C 92
Junction temperature range, suffix 6 TJ -40 105 °C Suffix 6 version 95
Power dissipation, LQFP144 (as printed) PD 500 mΩ TA = 85 °C (suffix 6) or 105 °C (suffix 7) 94
Ambient temperature, suffix 6, maximum power dissipation TA -40 85 °C Suffix 6 version, maximum power dissipation 94
Ambient temperature, suffix 6, low power dissipation TA -40 105 °C Suffix 6 version, low power dissipation 94
Internal AHB clock frequency fHCLK fHCLK 0 120 MHz Power scale 3 (VOS=0x01), regulator ON, overdrive OFF 93
Internal AHB clock frequency fHCLK fHCLK 0 144 MHz Power scale 2 (VOS=0x10), regulator ON, overdrive OFF 93
Internal AHB clock frequency fHCLK fHCLK 0 180 MHz Power scale 1 (VOS=0x11), regulator ON, overdrive ON 93
Internal APB1 clock frequency fPCLK1 fPCLK1 0 42 MHz Overdrive OFF 93
Internal APB2 clock frequency fPCLK2 fPCLK2 0 84 MHz Overdrive OFF 93
Internal regulator output V12, power scale 3 V12 1.08 1.14 1.2 V Regulator ON, VOS=0x01, 120 MHz HCLK max frequency 94
Internal regulator output V12, power scale 1 V12 1.26 1.32 1.4 V Regulator ON, VOS=0x11, HCLK max frequency 168 MHz overdrive OFF / 180 MHz overdrive ON 94
Power-on/power-down reset threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V Falling edge 97
BOR level 1 threshold, falling edge VBOR1 2.13 2.19 2.24 V Falling edge 97
POR reset duration TRSTTEMPO 0.5 1.5 3 ms 97
External capacitance CEXT on VCAP1/VCAP2 CEXT 2.2 µF 96
ESR of external VCAP capacitor ESR 2 Ω ESR of external capacitor 96
User external clock source frequency (HSE) fHSE_ext 1 50 MHz 115
HSE external user clock duty cycle DuCy(HSE) 45 55 % 115
HSE oscillator frequency fOSC_IN 4 26 MHz 118
HSE accuracy ACCHSE -500 500 ppm Depends on crystal used 118
User external clock source frequency (LSE) fLSE_ext 32.768 1000 kHz 116
LSE accuracy ACCLSE -500 500 ppm Depends on crystal used 119
HSI oscillator frequency fHSI 16 MHz 120
HSI accuracy, factory calibration ACCHSI -8 4.5 % TA = -40 to 105 °C 120
HSI accuracy, factory calibration ACCHSI -1 1 % TA = 25 °C 120
LSI oscillator frequency fLSI 17 32 47 kHz VDD = 3 V, TA = -40 to 105 °C 120
PLL input clock fPLL_IN 0.95 1 2.1 MHz 121
PLL output clock fPLL_OUT 24 180 MHz 121
PLL VCO output fVCO_OUT 192 432 MHz 121
Weak pull-up equivalent resistor (I/O) RPU 30 40 50 kΩ VIN = VSS, all pins except PA10/PB12 132
Weak pull-down equivalent resistor (I/O) RPD 30 40 50 kΩ VIN = VDD, all pins except PA10/PB12 132
I/O pin capacitance CIO 5 pF 132
Output low-level voltage, CMOS port VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
Output low-level voltage, IIO = +20 mA VOL 1.3 V IIO = +20 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
NRST weak pull-up equivalent resistor RPU 30 40 50 kΩ VIN = VSS 136
NRST input filtered pulse VF(NRST) 100 ns 136
USB OTG FS differential input sensitivity VDI 0.2 V I(USB_FS_DP/DM, USB_HS_DP/DM) 147
USB OTG FS static output low level VOL 0.3 V 1.5 kΩ RL to 3.6 V 147
Internal reference voltage VREFINT 1.18 1.21 1.24 V -40 °C < TA < +105 °C 159
DAC load resistance, buffer ON RLOAD 5 kΩ Buffer ON 160
DAC load capacitance, buffer ON CLOAD 50 pF Maximum capacitive load on DAC_OUT, buffer ON 160
ADC clock frequency, VDDA 1.7 to 2.4 V fADC 0.6 15 18 MHz VDDA = 1.7 to 2.4 V 153

CAD (KiCad official)

  • Symbol: STM32F427ZGT6
  • Footprint: Package_QFP:LQFP-144_20x20mm_P0.5mm
  • 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
  • 3D model files: stm32f427zgt6-etched.step / stm32f427zgt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f427zgt6.step / stm32f427zgt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (226 pp, sha256 9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF