3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F427VGT7
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F427VGT7 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TRACED0, SAI1_SD_B, FMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0 and EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0 and EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1 and EVENTOUT. |
| 6 | VBAT | power_in | Backup supply for the RTC, the 20x32-bit backup registers and the optional 4 KB backup SRAM. |
| 7 | PC13 | bidirectional | 5 V-tolerant I/O supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not source LED current; additional function TAMP_1. |
| 8 | PC14-OSC32_IN | bidirectional | I/O supplied through the power switch (3 mA limit), used as OSC32_IN of the 32 kHz oscillator in oscillator mode, with EVENTOUT alternate function. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O supplied through the power switch (3 mA limit), used as OSC32_OUT of the 32 kHz oscillator in oscillator mode, with EVENTOUT alternate function. |
| 10 | VSS | power_in | Ground pin. |
| 11 | VDD | power_in | Digital supply pin of the 1.7 V to 3.6 V application supply and I/Os. |
| 12 | PH0-OSC_IN | bidirectional | I/O (FT, 5 V tolerant except in oscillator mode) used as OSC_IN of the external crystal oscillator, with EVENTOUT alternate function. |
| 13 | PH1-OSC_OUT | bidirectional | I/O (FT, 5 V tolerant except in oscillator mode) used as OSC_OUT of the external crystal oscillator, with EVENTOUT alternate function. |
| 14 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V-tolerant I/O with ADC123_IN10, alternate functions OTG_HS_ULPI_STP, FMC_SDNWE and EVENTOUT. |
| 16 | PC1 | bidirectional | 5 V-tolerant I/O with ADC123_IN11, alternate functions ETH_MDC and EVENTOUT. |
| 17 | PC2 | bidirectional | 5 V-tolerant I/O with ADC123_IN12, alternate functions SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0 and EVENTOUT. |
| 18 | PC3 | bidirectional | 5 V-tolerant I/O with ADC123_IN13, alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0 and EVENTOUT. |
| 19 | VDD | power_in | Digital supply pin of the 1.7 V to 3.6 V application supply and I/Os. |
| 20 | VSSA | power_in | Analog ground pin. |
| 21 | VREF+ | power_in | Positive reference voltage input pin. |
| 22 | VDDA | power_in | Analog supply pin. |
| 23 | PA0-WKUP | bidirectional | 5 V-tolerant I/O with ADC123_IN0 and WKUP wake-up function; alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS and EVENTOUT. |
| 24 | PA1 | bidirectional | 5 V-tolerant I/O with ADC123_IN1, alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK and EVENTOUT. |
| 25 | PA2 | bidirectional | 5 V-tolerant I/O with ADC123_IN2, alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO and EVENTOUT. |
| 26 | PA3 | bidirectional | 5 V-tolerant I/O with ADC123_IN3, alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 and EVENTOUT. |
| 27 | VSS | power_in | Ground pin. |
| 28 | VDD | power_in | Digital supply pin of the 1.7 V to 3.6 V application supply and I/Os. |
| 29 | PA4 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC12_IN4 and DAC_OUT1; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC and EVENTOUT. |
| 30 | PA5 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC12_IN5 and DAC_OUT2; alternate functions TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK and EVENTOUT. |
| 31 | PA6 | bidirectional | 5 V-tolerant I/O with ADC12_IN6; alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2 and EVENTOUT. |
| 32 | PA7 | bidirectional | 5 V-tolerant I/O with ADC12_IN7; alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV and EVENTOUT. |
| 33 | PC4 | bidirectional | 5 V-tolerant I/O with ADC12_IN14; alternate functions ETH_MII_RXD0/ETH_RMII_RXD0 and EVENTOUT. |
| 34 | PC5 | bidirectional | 5 V-tolerant I/O with ADC12_IN15; alternate functions ETH_MII_RXD1/ETH_RMII_RXD1 and EVENTOUT. |
| 35 | PB0 | bidirectional | 5 V-tolerant I/O with ADC12_IN8; alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2 and EVENTOUT. |
| 36 | PB1 | bidirectional | 5 V-tolerant I/O with ADC12_IN9; alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3 and EVENTOUT. |
| 37 | PB2-BOOT1 | bidirectional | 5 V-tolerant I/O (FT) also providing the BOOT1 function, with EVENTOUT alternate function. |
| 38 | PE7 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_ETR, UART7_Rx, FMC_D4 and EVENTOUT. |
| 39 | PE8 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH1N, UART7_Tx, FMC_D5 and EVENTOUT. |
| 40 | PE9 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH1, FMC_D6 and EVENTOUT. |
| 41 | PE10 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH2N, FMC_D7 and EVENTOUT. |
| 42 | PE11 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3 and EVENTOUT. |
| 43 | PE12 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4 and EVENTOUT. |
| 44 | PE13 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE and EVENTOUT. |
| 45 | PE14 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK and EVENTOUT. |
| 46 | PE15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_BKIN, FMC_D12, LCD_R7 and EVENTOUT. |
| 47 | PB10 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 and EVENTOUT. |
| 48 | PB11 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5 and EVENTOUT. |
| 49 | VCAP_1 | passive | Regulator output pin that requires an external VCAP1 capacitor as specified in the VCAP1/VCAP2 operating conditions. |
| 50 | VDD | power_in | Digital supply pin of the 1.7 V to 3.6 V application supply and I/Os. |
| 51 | PB12 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID and EVENTOUT. |
| 52 | PB13 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1 and EVENTOUT; additional function OTG_HS_VBUS. |
| 53 | PB14 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM and EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP and EVENTOUT. |
| 55 | PD8 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART3_TX, FMC_D13 and EVENTOUT. |
| 56 | PD9 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART3_RX, FMC_D14 and EVENTOUT. |
| 57 | PD10 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART3_CK, FMC_D15, LCD_B3 and EVENTOUT. |
| 58 | PD11 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART3_CTS, FMC_A16 and EVENTOUT. |
| 59 | PD12 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH1, USART3_RTS, FMC_A17 and EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH2, FMC_A18 and EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH3, FMC_D0 and EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH4, FMC_D1 and EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC and EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6 and EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2 and EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3 and EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6 and EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0 and EVENTOUT; additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1 and EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM and EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP and EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions JTMS-SWDIO and EVENTOUT. |
| 73 | VCAP_2 | passive | Regulator output pin that requires an external VCAP2 capacitor as specified in the VCAP1/VCAP2 operating conditions. |
| 74 | VSS | power_in | Ground pin. |
| 75 | VDD | power_in | Digital supply pin of the 1.7 V to 3.6 V application supply and I/Os. |
| 76 | PA14 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions JTCK-SWCLK and EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS and EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2 and EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4 and EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9 and EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions CAN1_RX, FMC_D2 and EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions CAN1_TX, FMC_D3 and EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11 and EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 and EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART2_RTS, FMC_NOE and EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART2_TX, FMC_NWE and EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2 and EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART2_CK, FMC_NE1/FMC_NCE2 and EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK and EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD and EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10 and EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5 and EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC and EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT0 boot-mode input pin, also listed with the VPP function. |
| 95 | PB8 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6 and EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7 and EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2 and EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions UART8_Tx, FMC_NBL1, DCMI_D3 and EVENTOUT. |
| 99 | VSS | power_in | Ground pin. |
| 100 | VDD | power_in | Digital supply pin of the 1.7 V to 3.6 V application supply and I/Os. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VBAT) | VDD-VSS | -0.3 | 4 | V | 93 | ||
| Input voltage on TTa pins | VIN | 4 | V | Input voltage on TTa pins | 93 | ||
| Input voltage on any other pin | VIN | 4 | V | Input voltage on any other pin | 93 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | Variations between different VDD power pins | 93 | ||
| Variations between all ground pins including VREF- | /VSSX −VSS/ | 50 | mV | Variations between all the different ground pins including VREF- | 93 | ||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 270 | mA | 94 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | -270 | mA | 94 | |||
| Maximum current into each VDD_x power line (source) | IVDD | 100 | mA | 94 | |||
| Maximum current out of each VSS_x ground line (sink) | IVSS | -100 | mA | 94 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 94 | |||
| Output current sourced by any I/Os and control pin | IIO | -25 | mA | 94 | |||
| Total output current sunk by sum of all I/O and control pins | ΣIIO | 120 | mA | 94 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | -120 | mA | 94 | |||
| Injected current on FT pins | IINJ(PIN) | -5 | 0 | mA | Positive injection is not possible on FT pins | 94 | |
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | Injected current on TTa pins | 94 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 94 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 94 | ||
| Maximum junction temperature | TJ | 125 | °C | 94 | |||
| Internal AHB clock frequency | fHCLK | 0 | 180 | MHz | Power Scale 1, Regulator ON, over-drive ON | 95 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 45 | MHz | Over-drive ON | 95 | |
| Internal APB2 clock frequency | fPCLK2 | 0 | 90 | MHz | Over-drive ON | 95 | |
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 95 | ||
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 M samples; must be the same potential as VDD | 95 | |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 M samples | 95 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 95 | ||
| 1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) | V12 | 1.26 | 1.32 | 1.4 | V | Power Scale 1 (VOS=0x11), 168 MHz HCLK max frequency with over-drive OFF or 180 MHz with over-drive ON | 95 |
| 1.2 V external voltage on VCAP_1/VCAP_2 pins (regulator OFF) | V12 | 1.26 | 1.32 | 1.38 | V | Max frequency 168 MHz | 95 |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 96 | |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 96 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 96 | ||
| Power dissipation LQFP100 | PD | 465 | mW | Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 | 96 | ||
| Ambient temperature for 6 suffix version (maximum power dissipation) | TA | -40 | 85 | °C | Maximum power dissipation | 96 | |
| Ambient temperature for 6 suffix version (low power dissipation) | TA | -40 | 105 | °C | Low power dissipation | 96 | |
| Ambient temperature for 7 suffix version (maximum power dissipation) | TA | -40 | 105 | °C | Maximum power dissipation | 96 | |
| Ambient temperature for 7 suffix version (low power dissipation) | TA | -40 | 125 | °C | Low power dissipation | 96 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 6 suffix version | 96 | |
| Junction temperature range, 7 suffix version | TJ | -40 | 125 | °C | 7 suffix version | 96 | |
| VDD rise time rate | tVDD | 20 | µs/V | Regulator ON power-up; max printed as infinity | 98 | ||
| VDD fall time rate | tVDD | 20 | µs/V | Regulator ON power-down; max printed as infinity | 98 | ||
| Capacitance of external capacitor (VCAP1/VCAP2) | CEXT | 2.2 | µF | Capacitance of external capacitor | 97 | ||
| ESR of external capacitor (VCAP1/VCAP2) | ESR | 2 | Ω | ESR of external capacitor | 97 | ||
| Power-on/power-down reset threshold, falling edge | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 99 |
| Power-on/power-down reset threshold, rising edge | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 99 |
| POR reset temporization | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 99 | |
| Supply current in Stop mode, main regulator mode | IDD_STOP_NM | 0.4 | 25 | mA | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; typ at TA=25 °C VDD=3.6 V, max at TA=105 °C | 105 | |
| Supply current in Stop mode, low power regulator mode | IDD_STOP_NM | 0.29 | 18 | mA | Flash memory in Stop mode, all oscillators OFF, no independent watchdog; typ at TA=25 °C VDD=3.6 V, max at TA=105 °C | 105 | |
| Supply current in Stop mode, main regulator and under-drive mode | IDD_STOP_UDM | 0.19 | 9 | mA | Flash memory in Deep power down mode, main regulator in under-drive mode, all oscillators OFF; typ at TA=25 °C VDD=3.6 V, max at TA=105 °C | 105 |
CAD (KiCad official)
- Symbol:
STM32F427VGT7 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f427vgt7-etched.step/stm32f427vgt7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f427vgt7.step/stm32f427vgt7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (240 pp, sha256
2aa9c826cc4304f2, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).