main
History Download
Ray Publish 0.1.0 2e730dc

STM32F423CHU6

STMicroelectronics · ST Microelectronics · UFQFPN-48(7x7)

STM32F423CHU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VBAT power_in Backup battery supply pin for the RTC and backup domain (Table 10 lists VBAT as supply pin, additional function VBAT).
2 PC13-ANTI_TAMP bidirectional 5 V tolerant I/O supplied through the power switch (3 mA sink limit), output speed limited to 2 MHz with 30 pF max load and not usable as current source; additional function TAMP_1.
3 PC14-OSC32_IN bidirectional 5 V tolerant I/O (except in oscillator mode) supplied through the power switch, limited to 2 MHz/30 pF in output mode; additional function OSC32_IN for the 32 kHz crystal.
4 PC15-OSC32_OUT bidirectional 5 V tolerant I/O (except in oscillator mode) supplied through the power switch, limited to 2 MHz/30 pF in output mode; additional function OSC32_OUT for the 32 kHz crystal.
5 PH0-OSC_IN bidirectional I/O (5 V tolerant except in oscillator mode) with additional function OSC_IN for the 4-26 MHz crystal oscillator.
6 PH1-OSC_OUT bidirectional I/O (5 V tolerant except in oscillator mode) with additional function OSC_OUT for the 4-26 MHz crystal oscillator.
7 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
8 VSSA/VREF- power_in Analog ground, shared with the ADC/DAC negative reference (VSSA).
9 VDDA/VREF+ power_in Analog supply, shared with the ADC/DAC positive reference (VDDA/VREF+).
10 PA0 bidirectional 5 V tolerant I/O with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX alternate functions; additional functions ADC1_IN0, WKUP1.
11 PA1 bidirectional 5 V tolerant I/O with TIM2_CH2, TIM5_CH2, SPI4_MOSI, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3 alternate functions; additional function ADC1_IN1.
12 PA2 bidirectional 5 V tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, FSMC_D4 alternate functions; additional function ADC1_IN2.
13 PA3 bidirectional 5 V tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, SAI1_SD_B, FSMC_D5 alternate functions; additional function ADC1_IN3.
14 PA4 bidirectional 3.3 V tolerant I/O directly connected to DAC (TTa) with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, DFSDM1_DATIN1, FSMC_D6 alternate functions; additional functions ADC1_IN4, DAC_OUT1.
15 PA5 bidirectional 3.3 V tolerant I/O directly connected to DAC (TTa) with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, DFSDM1_CKIN1, FSMC_D7 alternate functions; additional functions ADC1_IN5, DAC_OUT2.
16 PA6 bidirectional 5 V tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, I2S2_MCK, DFSDM2_CKIN1, TIM13_CH1, QUADSPI_BK2_IO0, SDIO_CMD alternate functions; additional function ADC1_IN6.
17 PA7 bidirectional 5 V tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, DFSDM2_DATIN1, TIM14_CH1, QUADSPI_BK2_IO1 alternate functions; additional function ADC1_IN7.
18 PB0 bidirectional 5 V tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI5_SCK/I2S5_CK alternate functions; additional function ADC1_IN8.
19 PB1 bidirectional 5 V tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0, QUADSPI_CLK alternate functions; additional function ADC1_IN9.
20 PB2 bidirectional 5 V tolerant I/O with LPTIM1_OUT, DFSDM1_CKIN0, QUADSPI_CLK alternate functions; additional function BOOT1.
21 PB10 bidirectional 5 V tolerant I/O (FTf, I2C FM+ option) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, I2S3_MCK, USART3_TX, I2CFMP1_SCL, DFSDM2_CKOUT, SDIO_D7 alternate functions.
22 VCAP_1 passive Supply pin for the internal 1.2 V regulator output, connected to an external capacitor (VCAP_1).
23 VSS power_in Digital ground supply pin.
24 VDD power_in Digital supply pin for the application supply and I/Os (1.7 to 3.6 V).
25 PB12 bidirectional 5 V tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS, SPI3_SCK, USART3_CK, CAN2_RX, DFSDM1_DATIN1, UART5_RX, FSMC_D13 alternate functions.
26 PB13 bidirectional 5 V tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, SPI4_SCK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1, UART5_TX alternate functions.
27 PB14 bidirectional 5 V tolerant I/O (FTf, I2C FM+ option) with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, USART3_RTS, DFSDM1_DATIN2, TIM12_CH1, FSMC_D0, SDIO_D6 alternate functions.
28 PB15 bidirectional 5 V tolerant I/O (FTf, I2C FM+ option) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, TIM12_CH2, SDIO_CK alternate functions.
29 PA8 bidirectional 5 V tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, DFSDM1_CKOUT, USART1_CK, UART7_RX, USB_FS_SOF, CAN3_RX, SDIO_D1 alternate functions.
30 PA9 bidirectional 5 V tolerant I/O with TIM1_CH2, DFSDM2_CKIN3, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, USB_FS_VBUS, SDIO_D2 alternate functions.
31 PA10 bidirectional 5 V tolerant I/O with TIM1_CH3, DFSDM2_DATIN3, SPI2_MOSI/I2S2_SD, SPI5_MOSI, USART1_RX, USB_FS_ID alternate functions.
32 PA11 bidirectional 5 V tolerant I/O with TIM1_CH4, DFSDM2_CKIN5, SPI2_NSS, SPI4_MISO, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM, UART4_RX alternate functions.
33 PA12 bidirectional 5 V tolerant I/O with TIM1_ETR, DFSDM2_DATIN5, SPI2_MISO, SPI5_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP, UART4_TX alternate functions.
34 PA13 bidirectional 5 V tolerant I/O with JTMS-SWDIO debug function after reset.
35 VSS power_in Digital ground supply pin.
36 VDD power_in Digital supply pin for the application supply and I/Os (1.7 to 3.6 V).
37 PA14 bidirectional 5 V tolerant I/O with JTCK-SWCLK debug function after reset.
38 PA15 bidirectional 5 V tolerant I/O with JTDI, TIM2_CH1/ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, UART7_TX, SAI1_MCLK_A, CAN3_TX alternate functions.
39 PB3 bidirectional 5 V tolerant I/O (FTf) with JTDO-SWO, TIM2_CH2, I2CFMP1_SDA, SPI1_SCK, SPI3_SCK, USART1_RX, UART7_RX, I2C2_SDA, SAI1_SD_A, CAN3_RX alternate functions.
40 PB4 bidirectional 5 V tolerant I/O with JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, UART7_TX, I2C3_SDA, SAI1_SCK_A, CAN3_TX, SDIO_D0 alternate functions.
41 PB5 bidirectional 5 V tolerant I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, CAN2_RX, SAI1_FS_A, UART5_RX, SDIO_D3 alternate functions.
42 PB6 bidirectional 5 V tolerant I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, DFSDM2_CKIN7, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, UART5_TX, SDIO_D0 alternate functions.
43 PB7 bidirectional 5 V tolerant I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, DFSDM2_DATIN7, USART1_RX, FSMC_NL alternate functions.
44 BOOT0 input Dedicated boot mode selection input; additional function VPP.
45 PB8 bidirectional 5 V tolerant I/O with LPTIM1_OUT, TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI, DFSDM2_CKIN1, CAN1_RX, I2C3_SDA, UART5_RX, SDIO_D4 alternate functions.
46 PB9 bidirectional 5 V tolerant I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, DFSDM2_DATIN1, CAN1_TX, I2C2_SDA, UART5_TX, SDIO_D5 alternate functions.
47 VSS power_in Digital ground supply pin.
48 VDD power_in Digital supply pin for the application supply and I/Os (1.7 to 3.6 V).
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-48(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD-VSS external main supply voltage (including VDDA, VDD, VDDUSB and VBAT) VDD-VSS -0.3 4 V 81
Input voltage on TTa pins VIN -0.3 4 V 81
Input voltage on any other pin VIN -0.3 4 V 81
Variations between different VDD power pins /ΔVDDx/ 50 mV 81
Variations between all the different ground pins including VREF- /VSSX −VSS/ 50 mV 81
Total current into sum of all VDD_x power lines (source) ΣIVDD 180 mA 82
Total current out of sum of all VSS_x ground lines (sink) ΣIVSS -180 mA 82
Total current into VDDUSB power lines (source) ΣIVDDUSB 25 mA 82
Maximum current into each VDD_x power line (source) IVDD 100 mA 82
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 82
Output current sunk by any I/O and control pin IIO 25 mA 82
Output current sourced by any I/O and control pin IIO -25 mA 82
Total output current sunk by sum of all I/O and control pins ΣIIO 120 mA 82
Total output current sunk by sum of all USB I/Os ΣIIO 25 mA Sum of all USB I/Os 82
Total output current sourced by sum of all I/Os and control pins ΣIIO -120 mA 82
Injected current on FT and TC pins IINJ(PIN) -5 0 mA 82
Injected current on TTa pins IINJ(PIN) -5 5 mA 82
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 82
Storage temperature range TSTG -65 150 °C 82
Maximum junction temperature TJ 125 °C 82
Internal AHB clock frequency, Power Scale3 fHCLK 0 64 MHz Power Scale3: Regulator ON, VOS[1:0] = 0x01 83
Internal AHB clock frequency, Power Scale2 fHCLK 0 84 MHz Power Scale2: Regulator ON, VOS[1:0] = 0x10 83
Internal AHB clock frequency, Power Scale1 fHCLK 0 100 MHz Power Scale1: Regulator ON, VOS[1:0] = 0x11 83
Internal APB1 clock frequency fPCLK1 0 50 MHz 83
Internal APB2 clock frequency fPCLK2 0 100 MHz 83
Standard operating voltage VDD 1.7 3.6 V 83
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.7 2.4 V ADC limited to 1.2 M samples; must be the same potential as VDD 83
Analog operating voltage (ADC limited to 2.4 M samples) VDDA 2.4 3.6 V ADC limited to 2.4 M samples; must be the same potential as VDD 83
USB supply voltage (VDDUSB), USB not used VDDUSB 1.7 3.3 3.6 V USB not used 83
USB supply voltage (VDDUSB), USB used VDDUSB 3 3.6 V USB used 83
Backup operating voltage VBAT 1.65 3.6 V 83
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2, VOS=0x01 V12 1.08 1.14 1.2 V VOS[1:0] = 0x01; max frequency 64 MHz; guaranteed by test in production 83
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2, VOS=0x10 V12 1.2 1.26 1.32 V VOS[1:0] = 0x10; max frequency 84 MHz; guaranteed by test in production 83
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2, VOS=0x11 V12 1.26 1.32 1.38 V VOS[1:0] = 0x11; max frequency 100 MHz 83
Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2, 64 MHz V12 1.1 1.14 1.2 V Max frequency 64 MHz 83
Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2, 84 MHz V12 1.2 1.26 1.32 V Max frequency 84 MHz 83
Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2, 100 MHz V12 1.26 1.32 1.38 V Max frequency 100 MHz 83
Input voltage on RST, FT and TC pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 84
Input voltage on RST, FT and TC pins VIN -0.3 5.2 V VDD ≤ 2 V 84
Input voltage on TTa pins VIN -0.3 V Maximum printed as VDDA + 0.3 (not a numeric value) 84
Input voltage on BOOT0 pin VIN 0 9 V 84
Power dissipation at TA = 85 °C for range 6, UFQFPN48 PD 625 mW TA = 85 °C for range 6, maximum power dissipation 84
Power dissipation at TA = 125 °C for range 3, UFQFPN48 PD 156 mW TA = 125 °C for range 3, maximum power dissipation 84
Ambient temperature for range 6, maximum power dissipation TA -40 85 °C Maximum power dissipation 84
Ambient temperature for range 6, low power dissipation TA -40 105 °C Low power dissipation 84
Ambient temperature for range 7, maximum power dissipation TA -40 105 °C Maximum power dissipation 84
Ambient temperature for range 7, low power dissipation TA -40 125 °C Low power dissipation 84
Ambient temperature for range 3, maximum power dissipation TA -40 125 °C Maximum power dissipation 84
Ambient temperature for range 3, low power dissipation TA -40 130 °C Low power dissipation 84
Junction temperature range, range 6 TJ -40 105 °C Range 6 84
Junction temperature range, range 7 TJ -40 125 °C Range 7 84
Junction temperature range, range 3 TJ -40 130 °C Range 3 84
Power-on/power-down reset threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V Falling edge 87
Power-on/power-down reset threshold, rising edge VPOR/PDR 1.64 1.72 1.8 V Rising edge 87
PDR hysteresis VPDRhyst 40 mV 87
PVD hysteresis VPVDhyst 100 mV 87
BOR hysteresis VBORhyst 100 mV 88
Supply current in Stop mode, flash in Stop mode, low power regulator usage, VDD=3.6 V IDD_STOP 44.1 82.5 µA Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C 99
Supply current in Standby mode, RTC and LSE OFF, VDD=3.6 V IDD_STBY 2.5 4 µA RTC and LSE OFF; TA = 25 °C 100

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32F423CHU6
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: UFQFPN-48(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32f423chu6-etched.step / stm32f423chu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f423chu6.step / stm32f423chu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (210 pp, sha256 95e19737006950a4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF