← Commit history

Initial commit: component/stm32f415vgt6

Ray ·8b0ab2fc1f ·
2 files changed +832
README.mdadded+136
@@ -0,0 +1,136 @@+# STM32F415VGT6++**STMicroelectronics** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)++STM32F415VGT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | GPIO PE2, 5 V-tolerant I/O; alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT. |+| 2 | PE3 | bidirectional | GPIO PE3, 5 V-tolerant I/O; alternate functions TRACED0, FSMC_A19, EVENTOUT. |+| 3 | PE4 | bidirectional | GPIO PE4, 5 V-tolerant I/O; alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT. |+| 4 | PE5 | bidirectional | GPIO PE5, 5 V-tolerant I/O; alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT. |+| 5 | PE6 | bidirectional | GPIO PE6, 5 V-tolerant I/O; alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT. |+| 6 | VBAT | power_in | Battery supply for RTC, backup SRAM, and 20×32-bit backup registers; range 1.65 V to 3.6 V; connect to VDD when not using a battery. |+| 7 | PC13 | bidirectional | GPIO PC13, 5 V-tolerant I/O supplied via power switch (max 2 MHz output, 30 pF load, no current source use); additional functions RTC_OUT, RTC_TAMP1, RTC_TS. |+| 8 | PC14 | bidirectional | GPIO PC14/OSC32_IN, 5 V-tolerant I/O (not FT in oscillator mode); can be used as 32 kHz LSE oscillator input (OSC32_IN). |+| 9 | PC15 | bidirectional | GPIO PC15/OSC32_OUT, 5 V-tolerant I/O (not FT in oscillator mode); can be used as 32 kHz LSE oscillator output (OSC32_OUT). |+| 10 | VSS | power_in | Ground reference for digital power supply domain. |+| 11 | VDD | power_in | Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic. |+| 12 | PH0 | bidirectional | GPIO PH0/OSC_IN, 5 V-tolerant I/O (not FT in oscillator mode); can be used as 4-26 MHz HSE crystal oscillator input (OSC_IN). |+| 13 | PH1 | bidirectional | GPIO PH1/OSC_OUT, 5 V-tolerant I/O (not FT in oscillator mode); can be used as HSE crystal oscillator output (OSC_OUT). |+| 14 | NRST | bidirectional | Reset pin with embedded weak pull-up resistor; active-low system reset, can be driven externally or monitored for reset output. |+| 15 | PC0 | bidirectional | GPIO PC0, 5 V-tolerant I/O; alternate function OTG_HS_ULPI_STP; additional function ADC123_IN10. |+| 16 | PC1 | bidirectional | GPIO PC1, 5 V-tolerant I/O; alternate function ETH_MDC; additional function ADC123_IN11. |+| 17 | PC2 | bidirectional | GPIO PC2, 5 V-tolerant I/O; alternate functions SPI2_MISO/I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2; additional function ADC123_IN12. |+| 18 | PC3 | bidirectional | GPIO PC3, 5 V-tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK; additional function ADC123_IN13. |+| 19 | VDD | power_in | Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic. |+| 20 | VSSA | power_in | Ground reference for analog power supply domain (ADC, DAC, PLL); must be connected to VSS on the PCB. |+| 21 | VREF+ | power_in | Positive ADC and DAC reference voltage input; range VSSA ≤ VREF+ ≤ VDDA; decouple with 1 µF + 10 nF to VSSA. |+| 22 | VDDA | power_in | Analog supply voltage 1.8 V to 3.6 V for ADC, DAC, PLL, and internal references; must be ≥ VDD. |+| 23 | PA0 | bidirectional | GPIO PA0/WKUP, 5 V-tolerant I/O; standby wakeup pin; alternate functions TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS; additional functions ADC123_IN0, WKUP. |+| 24 | PA1 | bidirectional | GPIO PA1, 5 V-tolerant I/O; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK; additional function ADC123_IN1. |+| 25 | PA2 | bidirectional | GPIO PA2, 5 V-tolerant I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO; additional function ADC123_IN2. |+| 26 | PA3 | bidirectional | GPIO PA3, 5 V-tolerant I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL; additional function ADC123_IN3. |+| 27 | VSS | power_in | Ground reference for digital power supply domain. |+| 28 | VDD | power_in | Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic. |+| 29 | PA4 | bidirectional | GPIO PA4, 3.3 V-tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF; additional functions ADC12_IN4, DAC_OUT1. |+| 30 | PA5 | bidirectional | GPIO PA5, 3.3 V-tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N; additional functions ADC12_IN5, DAC_OUT2. |+| 31 | PA6 | bidirectional | GPIO PA6, 5 V-tolerant I/O; alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN; additional function ADC12_IN6. |+| 32 | PA7 | bidirectional | GPIO PA7, 5 V-tolerant I/O; alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV; additional function ADC12_IN7. |+| 33 | PC4 | bidirectional | GPIO PC4, 5 V-tolerant I/O; alternate functions ETH_RMII_RX_D0, ETH_MII_RX_D0; additional function ADC12_IN14. |+| 34 | PC5 | bidirectional | GPIO PC5, 5 V-tolerant I/O; alternate functions ETH_RMII_RX_D1, ETH_MII_RX_D1; additional function ADC12_IN15. |+| 35 | PB0 | bidirectional | GPIO PB0, 5 V-tolerant I/O; alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N; additional function ADC12_IN8. |+| 36 | PB1 | bidirectional | GPIO PB1, 5 V-tolerant I/O; alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N; additional function ADC12_IN9. |+| 37 | PB2 | bidirectional | GPIO PB2/BOOT1, 5 V-tolerant I/O; sampled at reset as BOOT1 configuration input to select boot memory source. |+| 38 | PE7 | bidirectional | GPIO PE7, 5 V-tolerant I/O; alternate functions FSMC_D4, TIM1_ETR, EVENTOUT. |+| 39 | PE8 | bidirectional | GPIO PE8, 5 V-tolerant I/O; alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT. |+| 40 | PE9 | bidirectional | GPIO PE9, 5 V-tolerant I/O; alternate functions FSMC_D6, TIM1_CH1, EVENTOUT. |+| 41 | PE10 | bidirectional | GPIO PE10, 5 V-tolerant I/O; alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT. |+| 42 | PE11 | bidirectional | GPIO PE11, 5 V-tolerant I/O; alternate functions FSMC_D8, TIM1_CH2, EVENTOUT. |+| 43 | PE12 | bidirectional | GPIO PE12, 5 V-tolerant I/O; alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT. |+| 44 | PE13 | bidirectional | GPIO PE13, 5 V-tolerant I/O; alternate functions FSMC_D10, TIM1_CH3, EVENTOUT. |+| 45 | PE14 | bidirectional | GPIO PE14, 5 V-tolerant I/O; alternate functions FSMC_D11, TIM1_CH4, EVENTOUT. |+| 46 | PE15 | bidirectional | GPIO PE15, 5 V-tolerant I/O; alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT. |+| 47 | PB10 | bidirectional | GPIO PB10, 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3. |+| 48 | PB11 | bidirectional | GPIO PB11, 5 V-tolerant I/O; alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4. |+| 49 | VCAP_1 | passive | External decoupling capacitor node for internal 1.2 V voltage regulator output; requires 1 µF (ceramic) capacitor to VSS per Table 16. |+| 50 | VDD | power_in | Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic. |+| 51 | PB12 | bidirectional | GPIO PB12, 5 V-tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID. |+| 52 | PB13 | bidirectional | GPIO PB13, 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1; additional function OTG_HS_VBUS. |+| 53 | PB14 | bidirectional | GPIO PB14, 5 V-tolerant I/O; alternate functions SPI2_MISO/I2S2ext_SD, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N. |+| 54 | PB15 | bidirectional | GPIO PB15, 5 V-tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP; additional function RTC_REFIN. |+| 55 | PD8 | bidirectional | GPIO PD8, 5 V-tolerant I/O; alternate functions FSMC_D13, USART3_TX, EVENTOUT. |+| 56 | PD9 | bidirectional | GPIO PD9, 5 V-tolerant I/O; alternate functions FSMC_D14, USART3_RX, EVENTOUT. |+| 57 | PD10 | bidirectional | GPIO PD10, 5 V-tolerant I/O; alternate functions FSMC_D15, USART3_CK, EVENTOUT. |+| 58 | PD11 | bidirectional | GPIO PD11, 5 V-tolerant I/O; alternate functions FSMC_CLE, FSMC_A16, USART3_CTS, EVENTOUT. |+| 59 | PD12 | bidirectional | GPIO PD12, 5 V-tolerant I/O; alternate functions FSMC_ALE, FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT. |+| 60 | PD13 | bidirectional | GPIO PD13, 5 V-tolerant I/O; alternate functions FSMC_A18, TIM4_CH2, EVENTOUT. |+| 61 | PD14 | bidirectional | GPIO PD14, 5 V-tolerant I/O; alternate functions FSMC_D0, TIM4_CH3, EVENTOUT. |+| 62 | PD15 | bidirectional | GPIO PD15, 5 V-tolerant I/O; alternate functions FSMC_D1, TIM4_CH4, EVENTOUT. |+| 63 | PC6 | bidirectional | GPIO PC6, 5 V-tolerant I/O; alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1. |+| 64 | PC7 | bidirectional | GPIO PC7, 5 V-tolerant I/O; alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2. |+| 65 | PC8 | bidirectional | GPIO PC8, 5 V-tolerant I/O; alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2. |+| 66 | PC9 | bidirectional | GPIO PC9, 5 V-tolerant I/O; alternate functions I2S_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4. |+| 67 | PA8 | bidirectional | GPIO PA8, 5 V-tolerant I/O; alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF. |+| 68 | PA9 | bidirectional | GPIO PA9, 5 V-tolerant I/O; alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0; additional function OTG_FS_VBUS. |+| 69 | PA10 | bidirectional | GPIO PA10, 5 V-tolerant I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1. |+| 70 | PA11 | bidirectional | GPIO PA11, 5 V-tolerant I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM. |+| 71 | PA12 | bidirectional | GPIO PA12, 5 V-tolerant I/O; alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP. |+| 72 | PA13 | bidirectional | GPIO PA13 (default JTMS-SWDIO), 5 V-tolerant I/O; JTAG TMS / SWD data I/O signal; set as floating input during and after reset. |+| 73 | VCAP_2 | passive | External decoupling capacitor node for internal 1.2 V voltage regulator output; requires 1 µF (ceramic) capacitor to VSS per Table 16. |+| 74 | VSS | power_in | Ground reference for digital power supply domain. |+| 75 | VDD | power_in | Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic. |+| 76 | PA14 | bidirectional | GPIO PA14 (default JTCK-SWCLK), 5 V-tolerant I/O; JTAG TCK / SWD clock input signal. |+| 77 | PA15 | bidirectional | GPIO PA15 (default JTDI), 5 V-tolerant I/O; alternate functions JTDI, SPI3_NSS/I2S3_WS, TIM2_CH1_ETR, SPI1_NSS. |+| 78 | PC10 | bidirectional | GPIO PC10, 5 V-tolerant I/O; alternate functions SPI3_SCK/I2S3_CK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX. |+| 79 | PC11 | bidirectional | GPIO PC11, 5 V-tolerant I/O; alternate functions UART4_RX, SPI3_MISO/I2S3ext_SD, SDIO_D3, DCMI_D4, USART3_RX. |+| 80 | PC12 | bidirectional | GPIO PC12, 5 V-tolerant I/O; alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI/I2S3_SD, USART3_CK. |+| 81 | PD0 | bidirectional | GPIO PD0, 5 V-tolerant I/O; alternate functions FSMC_D2, CAN1_RX, EVENTOUT. |+| 82 | PD1 | bidirectional | GPIO PD1, 5 V-tolerant I/O; alternate functions FSMC_D3, CAN1_TX, EVENTOUT. |+| 83 | PD2 | bidirectional | GPIO PD2, 5 V-tolerant I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |+| 84 | PD3 | bidirectional | GPIO PD3, 5 V-tolerant I/O; alternate functions FSMC_CLK, USART2_CTS, EVENTOUT. |+| 85 | PD4 | bidirectional | GPIO PD4, 5 V-tolerant I/O; alternate functions FSMC_NOE, USART2_RTS, EVENTOUT. |+| 86 | PD5 | bidirectional | GPIO PD5, 5 V-tolerant I/O; alternate functions FSMC_NWE, USART2_TX, EVENTOUT. |+| 87 | PD6 | bidirectional | GPIO PD6, 5 V-tolerant I/O; alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT. |+| 88 | PD7 | bidirectional | GPIO PD7, 5 V-tolerant I/O; alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT. |+| 89 | PB3 | bidirectional | GPIO PB3 (default JTDO/TRACESWO), 5 V-tolerant I/O; alternate functions JTDO, TRACESWO, SPI3_SCK/I2S3_CK, TIM2_CH2, SPI1_SCK. |+| 90 | PB4 | bidirectional | GPIO PB4 (default NJTRST), 5 V-tolerant I/O; alternate functions NJTRST, SPI3_MISO, TIM3_CH1, SPI1_MISO, I2S3ext_SD. |+| 91 | PB5 | bidirectional | GPIO PB5, 5 V-tolerant I/O; alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI/I2S3_SD, DCMI_D10. |+| 92 | PB6 | bidirectional | GPIO PB6, 5 V-tolerant I/O; alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX. |+| 93 | PB7 | bidirectional | GPIO PB7, 5 V-tolerant I/O; alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2. |+| 94 | BOOT0 | input | Dedicated BOOT0 input pin (type B); logic high at reset selects non-Flash boot source (system memory or SRAM) in combination with BOOT1 (PB2); has VPP function. |+| 95 | PB8 | bidirectional | GPIO PB8, 5 V-tolerant I/O; alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX. |+| 96 | PB9 | bidirectional | GPIO PB9, 5 V-tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX. |+| 97 | PE0 | bidirectional | GPIO PE0, 5 V-tolerant I/O; alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT. |+| 98 | PE1 | bidirectional | GPIO PE1, 5 V-tolerant I/O; alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT. |+| 99 | VSS | power_in | Ground reference for digital power supply domain (was PDR_ON in earlier silicon; changed to VSS on LQFP100 from Rev 2 of the datasheet). |+| 100 | VDD | power_in | Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Single Chip Microcomputer/Microcontroller |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F415VGT6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32f415vgt6-etched.step` / `stm32f415vgt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f415vgt6.step` / `stm32f415vgt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588858459504168960) (186 pp, sha256 `0a43b4c6d2c21667`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f415vgt6-datasheet.pdf)
page.jsonadded+696
@@ -0,0 +1,696 @@+{+  "slug": "stm32f415vgt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "single chip microcomputer-microcontroller",+    "stm32f415vgt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f415vgt6.kicad_sym",+    "stm32f415vgt6.kicad_mod",+    "stm32f415vgt6.glb",+    "stm32f415vgt6.step",+    "stm32f415vgt6.lbr",+    "docs/hero.png",+    "docs/stm32f415vgt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F415VGT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-100(14x14)",+    "pin_count": 100,+    "category": "Single Chip Microcomputer/Microcontroller",+    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588858459504168960",+    "parts": {+      "symbol": "stm32f415vgt6.kicad_sym",+      "footprint": "stm32f415vgt6.kicad_mod",+      "model_3d": "stm32f415vgt6-etched.glb",+      "model_3d_plain": "stm32f415vgt6.glb",+      "model_3d_step": "stm32f415vgt6-etched.step",+      "model_3d_step_plain": "stm32f415vgt6.step",+      "lbr": "stm32f415vgt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C118210"+    },+    "pins": [+      {+        "number": "1",+        "name": "PE2",+        "type": "bidirectional",+        "description": "GPIO PE2, 5 V-tolerant I/O; alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT."+      },+      {+        "number": "2",+        "name": "PE3",+        "type": "bidirectional",+        "description": "GPIO PE3, 5 V-tolerant I/O; alternate functions TRACED0, FSMC_A19, EVENTOUT."+      },+      {+        "number": "3",+        "name": "PE4",+        "type": "bidirectional",+        "description": "GPIO PE4, 5 V-tolerant I/O; alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT."+      },+      {+        "number": "4",+        "name": "PE5",+        "type": "bidirectional",+        "description": "GPIO PE5, 5 V-tolerant I/O; alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT."+      },+      {+        "number": "5",+        "name": "PE6",+        "type": "bidirectional",+        "description": "GPIO PE6, 5 V-tolerant I/O; alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT."+      },+      {+        "number": "6",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery supply for RTC, backup SRAM, and 20×32-bit backup registers; range 1.65 V to 3.6 V; connect to VDD when not using a battery."+      },+      {+        "number": "7",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO PC13, 5 V-tolerant I/O supplied via power switch (max 2 MHz output, 30 pF load, no current source use); additional functions RTC_OUT, RTC_TAMP1, RTC_TS."+      },+      {+        "number": "8",+        "name": "PC14",+        "type": "bidirectional",+        "description": "GPIO PC14/OSC32_IN, 5 V-tolerant I/O (not FT in oscillator mode); can be used as 32 kHz LSE oscillator input (OSC32_IN)."+      },+      {+        "number": "9",+        "name": "PC15",+        "type": "bidirectional",+        "description": "GPIO PC15/OSC32_OUT, 5 V-tolerant I/O (not FT in oscillator mode); can be used as 32 kHz LSE oscillator output (OSC32_OUT)."+      },+      {+        "number": "10",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for digital power supply domain."+      },+      {+        "number": "11",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic."+      },+      {+        "number": "12",+        "name": "PH0",+        "type": "bidirectional",+        "description": "GPIO PH0/OSC_IN, 5 V-tolerant I/O (not FT in oscillator mode); can be used as 4-26 MHz HSE crystal oscillator input (OSC_IN)."+      },+      {+        "number": "13",+        "name": "PH1",+        "type": "bidirectional",+        "description": "GPIO PH1/OSC_OUT, 5 V-tolerant I/O (not FT in oscillator mode); can be used as HSE crystal oscillator output (OSC_OUT)."+      },+      {+        "number": "14",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Reset pin with embedded weak pull-up resistor; active-low system reset, can be driven externally or monitored for reset output."+      },+      {+        "number": "15",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO PC0, 5 V-tolerant I/O; alternate function OTG_HS_ULPI_STP; additional function ADC123_IN10."+      },+      {+        "number": "16",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO PC1, 5 V-tolerant I/O; alternate function ETH_MDC; additional function ADC123_IN11."+      },+      {+        "number": "17",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO PC2, 5 V-tolerant I/O; alternate functions SPI2_MISO/I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2; additional function ADC123_IN12."+      },+      {+        "number": "18",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO PC3, 5 V-tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK; additional function ADC123_IN13."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic."+      },+      {+        "number": "20",+        "name": "VSSA",+        "type": "power_in",+        "description": "Ground reference for analog power supply domain (ADC, DAC, PLL); must be connected to VSS on the PCB."+      },+      {+        "number": "21",+        "name": "VREF+",+        "type": "power_in",+        "description": "Positive ADC and DAC reference voltage input; range VSSA ≤ VREF+ ≤ VDDA; decouple with 1 µF + 10 nF to VSSA."+      },+      {+        "number": "22",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply voltage 1.8 V to 3.6 V for ADC, DAC, PLL, and internal references; must be ≥ VDD."+      },+      {+        "number": "23",+        "name": "PA0",+        "type": "bidirectional",+        "description": "GPIO PA0/WKUP, 5 V-tolerant I/O; standby wakeup pin; alternate functions TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS; additional functions ADC123_IN0, WKUP."+      },+      {+        "number": "24",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO PA1, 5 V-tolerant I/O; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK; additional function ADC123_IN1."+      },+      {+        "number": "25",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO PA2, 5 V-tolerant I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO; additional function ADC123_IN2."+      },+      {+        "number": "26",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO PA3, 5 V-tolerant I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL; additional function ADC123_IN3."+      },+      {+        "number": "27",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for digital power supply domain."+      },+      {+        "number": "28",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic."+      },+      {+        "number": "29",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO PA4, 3.3 V-tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF; additional functions ADC12_IN4, DAC_OUT1."+      },+      {+        "number": "30",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO PA5, 3.3 V-tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N; additional functions ADC12_IN5, DAC_OUT2."+      },+      {+        "number": "31",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO PA6, 5 V-tolerant I/O; alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN; additional function ADC12_IN6."+      },+      {+        "number": "32",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO PA7, 5 V-tolerant I/O; alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV; additional function ADC12_IN7."+      },+      {+        "number": "33",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO PC4, 5 V-tolerant I/O; alternate functions ETH_RMII_RX_D0, ETH_MII_RX_D0; additional function ADC12_IN14."+      },+      {+        "number": "34",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO PC5, 5 V-tolerant I/O; alternate functions ETH_RMII_RX_D1, ETH_MII_RX_D1; additional function ADC12_IN15."+      },+      {+        "number": "35",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO PB0, 5 V-tolerant I/O; alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N; additional function ADC12_IN8."+      },+      {+        "number": "36",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO PB1, 5 V-tolerant I/O; alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N; additional function ADC12_IN9."+      },+      {+        "number": "37",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO PB2/BOOT1, 5 V-tolerant I/O; sampled at reset as BOOT1 configuration input to select boot memory source."+      },+      {+        "number": "38",+        "name": "PE7",+        "type": "bidirectional",+        "description": "GPIO PE7, 5 V-tolerant I/O; alternate functions FSMC_D4, TIM1_ETR, EVENTOUT."+      },+      {+        "number": "39",+        "name": "PE8",+        "type": "bidirectional",+        "description": "GPIO PE8, 5 V-tolerant I/O; alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PE9",+        "type": "bidirectional",+        "description": "GPIO PE9, 5 V-tolerant I/O; alternate functions FSMC_D6, TIM1_CH1, EVENTOUT."+      },+      {+        "number": "41",+        "name": "PE10",+        "type": "bidirectional",+        "description": "GPIO PE10, 5 V-tolerant I/O; alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT."+      },+      {+        "number": "42",+        "name": "PE11",+        "type": "bidirectional",+        "description": "GPIO PE11, 5 V-tolerant I/O; alternate functions FSMC_D8, TIM1_CH2, EVENTOUT."+      },+      {+        "number": "43",+        "name": "PE12",+        "type": "bidirectional",+        "description": "GPIO PE12, 5 V-tolerant I/O; alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT."+      },+      {+        "number": "44",+        "name": "PE13",+        "type": "bidirectional",+        "description": "GPIO PE13, 5 V-tolerant I/O; alternate functions FSMC_D10, TIM1_CH3, EVENTOUT."+      },+      {+        "number": "45",+        "name": "PE14",+        "type": "bidirectional",+        "description": "GPIO PE14, 5 V-tolerant I/O; alternate functions FSMC_D11, TIM1_CH4, EVENTOUT."+      },+      {+        "number": "46",+        "name": "PE15",+        "type": "bidirectional",+        "description": "GPIO PE15, 5 V-tolerant I/O; alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT."+      },+      {+        "number": "47",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO PB10, 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3."+      },+      {+        "number": "48",+        "name": "PB11",+        "type": "bidirectional",+        "description": "GPIO PB11, 5 V-tolerant I/O; alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4."+      },+      {+        "number": "49",+        "name": "VCAP_1",+        "type": "passive",+        "description": "External decoupling capacitor node for internal 1.2 V voltage regulator output; requires 1 µF (ceramic) capacitor to VSS per Table 16."+      },+      {+        "number": "50",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic."+      },+      {+        "number": "51",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO PB12, 5 V-tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID."+      },+      {+        "number": "52",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO PB13, 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1; additional function OTG_HS_VBUS."+      },+      {+        "number": "53",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO PB14, 5 V-tolerant I/O; alternate functions SPI2_MISO/I2S2ext_SD, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N."+      },+      {+        "number": "54",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO PB15, 5 V-tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP; additional function RTC_REFIN."+      },+      {+        "number": "55",+        "name": "PD8",+        "type": "bidirectional",+        "description": "GPIO PD8, 5 V-tolerant I/O; alternate functions FSMC_D13, USART3_TX, EVENTOUT."+      },+      {+        "number": "56",+        "name": "PD9",+        "type": "bidirectional",+        "description": "GPIO PD9, 5 V-tolerant I/O; alternate functions FSMC_D14, USART3_RX, EVENTOUT."+      },+      {+        "number": "57",+        "name": "PD10",+        "type": "bidirectional",+        "description": "GPIO PD10, 5 V-tolerant I/O; alternate functions FSMC_D15, USART3_CK, EVENTOUT."+      },+      {+        "number": "58",+        "name": "PD11",+        "type": "bidirectional",+        "description": "GPIO PD11, 5 V-tolerant I/O; alternate functions FSMC_CLE, FSMC_A16, USART3_CTS, EVENTOUT."+      },+      {+        "number": "59",+        "name": "PD12",+        "type": "bidirectional",+        "description": "GPIO PD12, 5 V-tolerant I/O; alternate functions FSMC_ALE, FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT."+      },+      {+        "number": "60",+        "name": "PD13",+        "type": "bidirectional",+        "description": "GPIO PD13, 5 V-tolerant I/O; alternate functions FSMC_A18, TIM4_CH2, EVENTOUT."+      },+      {+        "number": "61",+        "name": "PD14",+        "type": "bidirectional",+        "description": "GPIO PD14, 5 V-tolerant I/O; alternate functions FSMC_D0, TIM4_CH3, EVENTOUT."+      },+      {+        "number": "62",+        "name": "PD15",+        "type": "bidirectional",+        "description": "GPIO PD15, 5 V-tolerant I/O; alternate functions FSMC_D1, TIM4_CH4, EVENTOUT."+      },+      {+        "number": "63",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO PC6, 5 V-tolerant I/O; alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1."+      },+      {+        "number": "64",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO PC7, 5 V-tolerant I/O; alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2."+      },+      {+        "number": "65",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO PC8, 5 V-tolerant I/O; alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2."+      },+      {+        "number": "66",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO PC9, 5 V-tolerant I/O; alternate functions I2S_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4."+      },+      {+        "number": "67",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO PA8, 5 V-tolerant I/O; alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF."+      },+      {+        "number": "68",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO PA9, 5 V-tolerant I/O; alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0; additional function OTG_FS_VBUS."+      },+      {+        "number": "69",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO PA10, 5 V-tolerant I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1."+      },+      {+        "number": "70",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO PA11, 5 V-tolerant I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM."+      },+      {+        "number": "71",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO PA12, 5 V-tolerant I/O; alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP."+      },+      {+        "number": "72",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO PA13 (default JTMS-SWDIO), 5 V-tolerant I/O; JTAG TMS / SWD data I/O signal; set as floating input during and after reset."+      },+      {+        "number": "73",+        "name": "VCAP_2",+        "type": "passive",+        "description": "External decoupling capacitor node for internal 1.2 V voltage regulator output; requires 1 µF (ceramic) capacitor to VSS per Table 16."+      },+      {+        "number": "74",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for digital power supply domain."+      },+      {+        "number": "75",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic."+      },+      {+        "number": "76",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO PA14 (default JTCK-SWCLK), 5 V-tolerant I/O; JTAG TCK / SWD clock input signal."+      },+      {+        "number": "77",+        "name": "PA15",+        "type": "bidirectional",+        "description": "GPIO PA15 (default JTDI), 5 V-tolerant I/O; alternate functions JTDI, SPI3_NSS/I2S3_WS, TIM2_CH1_ETR, SPI1_NSS."+      },+      {+        "number": "78",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO PC10, 5 V-tolerant I/O; alternate functions SPI3_SCK/I2S3_CK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX."+      },+      {+        "number": "79",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO PC11, 5 V-tolerant I/O; alternate functions UART4_RX, SPI3_MISO/I2S3ext_SD, SDIO_D3, DCMI_D4, USART3_RX."+      },+      {+        "number": "80",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO PC12, 5 V-tolerant I/O; alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI/I2S3_SD, USART3_CK."+      },+      {+        "number": "81",+        "name": "PD0",+        "type": "bidirectional",+        "description": "GPIO PD0, 5 V-tolerant I/O; alternate functions FSMC_D2, CAN1_RX, EVENTOUT."+      },+      {+        "number": "82",+        "name": "PD1",+        "type": "bidirectional",+        "description": "GPIO PD1, 5 V-tolerant I/O; alternate functions FSMC_D3, CAN1_TX, EVENTOUT."+      },+      {+        "number": "83",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO PD2, 5 V-tolerant I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT."+      },+      {+        "number": "84",+        "name": "PD3",+        "type": "bidirectional",+        "description": "GPIO PD3, 5 V-tolerant I/O; alternate functions FSMC_CLK, USART2_CTS, EVENTOUT."+      },+      {+        "number": "85",+        "name": "PD4",+        "type": "bidirectional",+        "description": "GPIO PD4, 5 V-tolerant I/O; alternate functions FSMC_NOE, USART2_RTS, EVENTOUT."+      },+      {+        "number": "86",+        "name": "PD5",+        "type": "bidirectional",+        "description": "GPIO PD5, 5 V-tolerant I/O; alternate functions FSMC_NWE, USART2_TX, EVENTOUT."+      },+      {+        "number": "87",+        "name": "PD6",+        "type": "bidirectional",+        "description": "GPIO PD6, 5 V-tolerant I/O; alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT."+      },+      {+        "number": "88",+        "name": "PD7",+        "type": "bidirectional",+        "description": "GPIO PD7, 5 V-tolerant I/O; alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT."+      },+      {+        "number": "89",+        "name": "PB3",+        "type": "bidirectional",+        "description": "GPIO PB3 (default JTDO/TRACESWO), 5 V-tolerant I/O; alternate functions JTDO, TRACESWO, SPI3_SCK/I2S3_CK, TIM2_CH2, SPI1_SCK."+      },+      {+        "number": "90",+        "name": "PB4",+        "type": "bidirectional",+        "description": "GPIO PB4 (default NJTRST), 5 V-tolerant I/O; alternate functions NJTRST, SPI3_MISO, TIM3_CH1, SPI1_MISO, I2S3ext_SD."+      },+      {+        "number": "91",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO PB5, 5 V-tolerant I/O; alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI/I2S3_SD, DCMI_D10."+      },+      {+        "number": "92",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO PB6, 5 V-tolerant I/O; alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX."+      },+      {+        "number": "93",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO PB7, 5 V-tolerant I/O; alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2."+      },+      {+        "number": "94",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated BOOT0 input pin (type B); logic high at reset selects non-Flash boot source (system memory or SRAM) in combination with BOOT1 (PB2); has VPP function."+      },+      {+        "number": "95",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO PB8, 5 V-tolerant I/O; alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX."+      },+      {+        "number": "96",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO PB9, 5 V-tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX."+      },+      {+        "number": "97",+        "name": "PE0",+        "type": "bidirectional",+        "description": "GPIO PE0, 5 V-tolerant I/O; alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT."+      },+      {+        "number": "98",+        "name": "PE1",+        "type": "bidirectional",+        "description": "GPIO PE1, 5 V-tolerant I/O; alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT."+      },+      {+        "number": "99",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for digital power supply domain (was PDR_ON in earlier silicon; changed to VSS on LQFP100 from Rev 2 of the datasheet)."+      },+      {+        "number": "100",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply voltage 1.8 V to 3.6 V for I/O pins and internal digital logic."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Limited datasheet pages provided: Only pages 1-9, 39-70, and 176-185 were available; complete altern",+          "24/100 pins cited to the wrong page (name found elsewhere): ['54:PE0@p51', '55:PB9@p52', '56:PB8@p52', '57:BOOT0@p52']"+        ],+        "pages_sent": 55,+        "cost_usd": 1.5829,+        "at": "2026-09-21T22:34:25"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588858459504168960",+        "pages": 186,+        "sha256": "0a43b4c6d2c21667",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 100,+        "described": 100,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file