main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32f415rgt6tr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32f415rgt6tr-etched.glb stm32f415rgt6tr: factory component page (tier=mfr) · Ray
stm32f415rgt6tr-etched.step stm32f415rgt6tr: factory component page (tier=mfr) · Ray
stm32f415rgt6tr-hero.glb stm32f415rgt6tr: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32f415rgt6tr-hero.overlay.json stm32f415rgt6tr: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32f415rgt6tr.glb Publish 0.1.0 · Ray
stm32f415rgt6tr.kicad_mod Publish 0.1.0 · Ray
stm32f415rgt6tr.kicad_sym Publish 0.1.0 · Ray
stm32f415rgt6tr.lbr Publish 0.1.0 · Ray
stm32f415rgt6tr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 64 pins · Ray

STM32F415RGT6TR

STMicroelectronics · ST Microelectronics · LQFP-64(10x10)

STM32F415RGT6TR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup-domain supply pin for the RTC, backup registers and optional backup SRAM, as stated in the features list.
2 PC13 bidirectional 5 V-tolerant (FT) I/O supplied through the power switch with a 3 mA sink limit, so output speed must not exceed 2 MHz at 30 pF and it must not be used as a current source; additional functions RTC_OUT, RTC_TAMP1, RTC_TS.
3 PC14/OSC32_IN bidirectional FT I/O supplied through the power switch (3 mA limit, output speed up to 2 MHz at 30 pF); in oscillator mode it is the OSC32_IN LSE input and FT tolerance does not apply.
4 PC15/OSC32_OUT bidirectional FT I/O supplied through the power switch (3 mA limit, output speed up to 2 MHz at 30 pF); in oscillator mode it is the OSC32_OUT LSE output and FT tolerance does not apply.
5 PH0/OSC_IN bidirectional I/O with OSC_IN as the HSE oscillator input in oscillator mode, where FT tolerance does not apply; also EVENTOUT.
6 PH1/OSC_OUT bidirectional I/O with OSC_OUT as the HSE oscillator output in oscillator mode, where FT tolerance does not apply; also EVENTOUT.
7 NRST bidirectional Bidirectional active-low reset pin with embedded weak pull-up resistor.
8 PC0 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN10 analog input; alternate OTG_HS_ULPI_STP and EVENTOUT.
9 PC1 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN11 analog input; alternate ETH_MDC and EVENTOUT.
10 PC2 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN12 analog input; alternates SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2 and EVENTOUT.
11 PC3 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN13 analog input; alternates SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK and EVENTOUT.
12 VSSA power_in Analog ground pin for the analog blocks (ADC/DAC).
13 VDDA power_in Analog supply pin for the analog blocks (ADC/DAC) of the device.
14 PA0/WKUP bidirectional 5 V-tolerant (FT) I/O that also serves as the WKUP wake-up input; ADC123_IN0 analog input; alternates USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1 and TIM8_ETR.
15 PA1 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN1 analog input; alternates USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2 and TIM2_CH2.
16 PA2 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN2 analog input; alternates USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3 and ETH_MDIO.
17 PA3 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC123_IN3 analog input; alternates USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0 and ETH_MII_COL.
18 VSS power_in Ground pin.
19 VDD power_in Main supply pin for the I/Os and internal regulator; application supply range 1.8 V to 3.6 V.
20 PA4 bidirectional 3.3 V-tolerant (TTa) I/O directly connected to the ADC; ADC12_IN4 and DAC_OUT1 analog functions; alternates SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF and I2S3_WS.
21 PA5 bidirectional 3.3 V-tolerant (TTa) I/O directly connected to the ADC; ADC12_IN5 and DAC_OUT2 analog functions; alternates SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR and TIM8_CH1N.
22 PA6 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC12_IN6 analog input; alternates SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1 and TIM1_BKIN.
23 PA7 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC12_IN7 analog input; alternates SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, ETH_RMII_CRS_DV and TIM1_CH1N.
24 PC4 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC12_IN14 analog input; alternates ETH_RMII_RX_D0 and ETH_MII_RX_D0.
25 PC5 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC12_IN15 analog input; alternates ETH_RMII_RX_D1 and ETH_MII_RX_D1.
26 PB0 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC12_IN8 analog input; alternates TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2 and TIM1_CH2N.
27 PB1 bidirectional 5 V-tolerant (FT) I/O, FT except in analog mode; ADC12_IN9 analog input; alternates TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3 and TIM1_CH3N.
28 PB2/BOOT1 bidirectional 5 V-tolerant (FT) I/O with EVENTOUT as its alternate function; the pin name also carries the BOOT1 boot option.
29 PB10 bidirectional 5 V-tolerant (FT) I/O; alternates TIM2_CH3, SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3 and ETH_MII_RX_ER.
30 PB11 bidirectional 5 V-tolerant (FT) I/O; alternates TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN and ETH_RMII_TX_EN.
31 VCAP_1 power_in Regulator decoupling pin; connect the external VCAP_1 capacitor as specified in the datasheet operating conditions.
32 VDD power_in Main supply pin for the I/Os and internal regulator; application supply range 1.8 V to 3.6 V.
33 PB12 bidirectional 5 V-tolerant (FT) I/O; alternates TIM1_BKIN, SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0, ETH_RMII_TXD0 and OTG_HS_ID.
34 PB13 bidirectional 5 V-tolerant (FT) I/O; alternates TIM1_CH1N, SPI2_SCK, I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1 and ETH_RMII_TXD1; additional function OTG_HS_VBUS.
35 PB14 bidirectional 5 V-tolerant (FT) I/O; alternates TIM1_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, TIM8_CH2N and OTG_HS_DM.
36 PB15 bidirectional 5 V-tolerant (FT) I/O; alternates TIM1_CH3N, SPI2_MOSI, I2S2_SD, TIM8_CH3N, TIM12_CH2 and OTG_HS_DP; additional function RTC_REFIN.
37 PC6 bidirectional 5 V-tolerant (FT) I/O; alternates I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0 and TIM3_CH1.
38 PC7 bidirectional 5 V-tolerant (FT) I/O; alternates I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1 and TIM3_CH2.
39 PC8 bidirectional 5 V-tolerant (FT) I/O; alternates TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK and DCMI_D2.
40 PC9 bidirectional 5 V-tolerant (FT) I/O; alternates I2S_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3 and TIM3_CH4.
41 PA8 bidirectional 5 V-tolerant (FT) I/O; alternates MCO1, USART1_CK, TIM1_CH1, I2C3_SCL and OTG_FS_SOF.
42 PA9 bidirectional 5 V-tolerant (FT) I/O; alternates USART1_TX, TIM1_CH2, I2C3_SMBA and DCMI_D0; additional function OTG_FS_VBUS.
43 PA10 bidirectional 5 V-tolerant (FT) I/O; alternates USART1_RX, TIM1_CH3, OTG_FS_ID and DCMI_D1.
44 PA11 bidirectional 5 V-tolerant (FT) I/O; alternates USART1_CTS, CAN1_RX, TIM1_CH4 and OTG_FS_DM.
45 PA12 bidirectional 5 V-tolerant (FT) I/O; alternates USART1_RTS, CAN1_TX, TIM1_ETR and OTG_FS_DP.
46 PA13/JTMS-SWDIO bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTMS-SWDIO (serial wire debug data), with EVENTOUT.
47 VCAP_2 power_in Regulator decoupling pin; connect the external VCAP_2 capacitor as specified in the datasheet operating conditions.
48 VDD power_in Main supply pin for the I/Os and internal regulator; application supply range 1.8 V to 3.6 V.
49 PA14/JTCK-SWCLK bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTCK-SWCLK (serial wire debug clock), with EVENTOUT.
50 PA15/JTDI bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTDI; alternates TIM2_CH1_ETR, SPI1_NSS, SPI3_NSS and I2S3_WS.
51 PC10 bidirectional 5 V-tolerant (FT) I/O; alternates SPI3_SCK, I2S3_CK, UART4_TX, SDIO_D2, DCMI_D8 and USART3_TX.
52 PC11 bidirectional 5 V-tolerant (FT) I/O; alternates UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX and I2S3ext_SD.
53 PC12 bidirectional 5 V-tolerant (FT) I/O; alternates UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD and USART3_CK.
54 PD2 bidirectional 5 V-tolerant (FT) I/O; alternates TIM3_ETR, UART5_RX, SDIO_CMD and DCMI_D11.
55 PB3/JTDO/TRACESWO bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTDO/TRACESWO; alternates SPI3_SCK, I2S3_CK, TIM2_CH2 and SPI1_SCK.
56 PB4/NJTRST bidirectional 5 V-tolerant (FT) I/O whose function after reset is NJTRST; alternates SPI3_MISO, TIM3_CH1, SPI1_MISO and I2S3ext_SD.
57 PB5 bidirectional 5 V-tolerant (FT) I/O; alternates I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10 and I2S3_SD.
58 PB6 bidirectional 5 V-tolerant (FT) I/O; alternates I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5 and USART1_TX.
59 PB7 bidirectional 5 V-tolerant (FT) I/O; alternates I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX and TIM4_CH2.
60 BOOT0 input Dedicated BOOT0 boot-selection input; additional function VPP.
61 PB8 bidirectional 5 V-tolerant (FT) I/O; alternates TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL and CAN1_RX.
62 PB9 bidirectional 5 V-tolerant (FT) I/O; alternates SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA and CAN1_TX.
63 VSS power_in Ground pin.
64 VDD power_in Main supply pin for the I/Os and internal regulator; application supply range 1.8 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD) VDD-VSS -0.3 4 V 81
Input voltage on any other pin VIN 4 V 81
Variations between different VDD power pins /ΔVDDx/ 50 mV 81
Variations between all the different ground pins including VREF- /VSSX −VSS/ 50 mV 81
Total current into VDD power lines (source) IVDD 240 mA 82
Total current out of VSS ground lines (sink) IVSS 240 mA 82
Output current sunk by any I/O and control pin IIO 25 mA 82
Output current source by any I/Os and control pin IIO 25 mA 82
Injected current on five-volt tolerant I/O IINJ(PIN) -5 0 mA 82
Injected current on any other pin IINJ(PIN) -5 5 mA 82
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 82
Storage temperature range TSTG -65 150 °C 82
Maximum junction temperature TJ 125 °C 82
Internal AHB clock frequency fHCLK 0 144 MHz VOS bit in PWR_CR register = 0 82
Internal AHB clock frequency fHCLK 0 168 MHz VOS bit in PWR_CR register = 1 82
Internal APB1 clock frequency fPCLK1 0 42 MHz 82
Internal APB2 clock frequency fPCLK2 0 84 MHz 82
Standard operating voltage VDD 1.8 3.6 V 82
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.8 2.4 V Must be the same potential as VDD 82
Analog operating voltage (ADC limited to 1.4 M samples) VDDA 2.4 3.6 V Must be the same potential as VDD 82
Backup operating voltage VBAT 1.65 3.6 V 82
1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) V12 1.08 1.14 1.2 V Regulator ON; VOS bit = 0; max frequency 144 MHz 83
1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) V12 1.2 1.26 1.32 V Regulator ON; VOS bit = 1; max frequency 168 MHz 83
1.2 V external voltage on VCAP_1/VCAP_2 pins (regulator OFF) V12 1.1 1.14 1.2 V Regulator OFF; max frequency 144 MHz 83
1.2 V external voltage on VCAP_1/VCAP_2 pins (regulator OFF) V12 1.2 1.26 1.3 V Regulator OFF; max frequency 168 MHz 83
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 83
Input voltage on RST and FT pins VIN -0.3 5.2 V VDD ≤ 2 V 83
Input voltage on TTa pins VIN -0.3 V 83
Input voltage on B pin VIN 5.5 V 83
Power dissipation (LQFP64) PD 435 mW TA = 85 °C for suffix 6 83
Ambient temperature for 6 suffix version (maximum power dissipation) TA -40 85 °C Maximum power dissipation 83
Ambient temperature for 6 suffix version (low-power dissipation) TA -40 105 °C Low-power dissipation 83
Junction temperature range, 6 suffix version TJ -40 105 °C 83
VDD rise time rate tVDD 20 µs/V Regulator ON, power-up 85
VDD fall time rate tVDD 20 µs/V Regulator ON, power-down 85
Power-on/power-down reset threshold (falling edge) VPOR/PDR 1.6 1.68 1.76 V Falling edge 86
Power-on/power-down reset threshold (rising edge) VPOR/PDR 1.64 1.72 1.8 V Rising edge 86
PDR hysteresis VPDRhyst 40 mV Specified by design 86
Brownout level 1 threshold (falling edge) VBOR1 2.13 2.19 2.24 V Falling edge 86
Brownout level 1 threshold (rising edge) VBOR1 2.23 2.29 2.33 V Rising edge 86
Brownout level 2 threshold (falling edge) VBOR2 2.44 2.5 2.56 V Falling edge 86
Brownout level 2 threshold (rising edge) VBOR2 2.53 2.59 2.63 V Rising edge 86
Brownout level 3 threshold (falling edge) VBOR3 2.75 2.83 2.88 V Falling edge 87
Brownout level 3 threshold (rising edge) VBOR3 2.85 2.92 2.97 V Rising edge 87
BOR hysteresis VBORhyst 100 mV Specified by design 87
Reset temporization TRSTTEMPO 0.5 1.5 3 ms Measured from power-on to first instruction read 87
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH 5.4 µC VDD = 1.8 V, TA = 105 °C, IRUSH = 171 mA for 31 µs 87
Supply current in Run mode, external clock, all peripherals enabled IDD 87 mA fHCLK = 168 MHz, TA = 25 °C 88
Supply current in Run mode, external clock, all peripherals enabled IDD 102 mA fHCLK = 168 MHz, TA = 85 °C 88
Supply current in Run mode, external clock, all peripherals enabled IDD 109 mA fHCLK = 168 MHz, TA = 105 °C 88
Supply current in Stop mode (main regulator in Run mode) IDD_STOP 0.45 11 mA Flash in Stop mode, LS/HS RC and HSE OFF, TA = 85 °C 93
Supply current in Stop mode (main regulator in Run mode) IDD_STOP 20 mA Flash in Stop mode, LS/HS RC and HSE OFF, TA = 105 °C 93
Internal current-consumption dependency: external VCAP capacitance CEXT 2.2 µF Capacitance of external capacitor (VCAP_1/VCAP_2) 85
ESR of external VCAP capacitor ESR 2 Ω ESR of external capacitor 85
External user clock source frequency (HSE) fHSE_ext 1 50 MHz 103
OSC_IN high or low time tw(HSE) 5 ns Specified by design 103
OSC_IN rise or fall time tr(HSE)/tf(HSE) 10 ns Specified by design 103
Duty cycle (HSE external clock) DuCy(HSE) 45 55 % 103

CAD (KiCad official)

  • Symbol: STM32F415RGT6TR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f415rgt6tr-etched.step / stm32f415rgt6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f415rgt6tr.step / stm32f415rgt6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (208 pp, sha256 077d413280ce588e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF