component
STM32F412RGT6TR
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+82@@ -0,0 +1,82 @@+# STM32F412RGT6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F412RGT6TR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery backup power supply for RTC and backup domain, 1.7 V to 3.6 V operating range. |+| 2 | PC13 | bidirectional | GPIO Port C bit 13, 5 V tolerant I/O with output speed limited to 2 MHz and maximum 30 pF load due to power switch limitation. |+| 3 | PC14-OSC32_IN | bidirectional | GPIO Port C bit 14 / 32 kHz oscillator input, 5 V tolerant I/O except in oscillator mode. |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO Port C bit 15 / 32 kHz oscillator output, 5 V tolerant I/O except in oscillator mode. |+| 5 | PH0-OSC_IN | bidirectional | GPIO Port H bit 0 / main crystal oscillator input for 4-26 MHz, 5 V tolerant I/O except in oscillator mode. |+| 6 | PH1-OSC_OUT | bidirectional | GPIO Port H bit 1 / main crystal oscillator output for 4-26 MHz, 5 V tolerant I/O except in oscillator mode. |+| 7 | NRST | bidirectional | Reset input with embedded weak pull-up resistor, active low, triggers system reset or wakes from low-power modes. |+| 8 | PC0 | bidirectional | GPIO Port C bit 0, 5 V tolerant I/O with ADC1_10 analog input capability. |+| 9 | PC1 | bidirectional | GPIO Port C bit 1, 5 V tolerant I/O with ADC1_11 analog input capability. |+| 10 | PC2 | bidirectional | GPIO Port C bit 2, 5 V tolerant I/O supporting SPI2_MISO, I2S2, DFSDM1, and FSMC alternate functions with ADC1_12 capability. |+| 11 | PC3 | bidirectional | GPIO Port C bit 3, 5 V tolerant I/O supporting SPI2_MOSI, I2S2_SD, and FSMC alternate functions with ADC1_13 capability. |+| 12 | VSSA/VREF- | power_in | Analog ground supply and negative reference voltage for ADC, must be connected to VSS through low-impedance path. |+| 13 | VDDA/VREF+ | power_in | Analog power supply and positive reference voltage for ADC, 1.7 V to 3.6 V, must be decoupled with capacitors per application design. |+| 14 | PA0 | bidirectional | GPIO Port A bit 0, 5 V tolerant I/O supporting TIM2/TIM5/TIM8 and USART2 alternate functions with ADC1_0 analog input. |+| 15 | PA1 | bidirectional | GPIO Port A bit 1, 5 V tolerant I/O supporting TIM2/TIM5, SPI4, and QUADSPI alternate functions with ADC1_1 analog input. |+| 16 | PA2 | bidirectional | GPIO Port A bit 2, 5 V tolerant I/O supporting TIM2/TIM5/TIM9, I2S2, USART2, and FSMC alternate functions with ADC1_2 capability. |+| 17 | PA3 | bidirectional | GPIO Port A bit 3, 5 V tolerant I/O supporting TIM2/TIM5/TIM9, I2S2, USART2, and FSMC alternate functions with ADC1_3 capability. |+| 18 | VSS | power_in | Digital ground supply pin for core digital logic circuits. |+| 19 | VDD | power_in | Main digital power supply, 1.7 V to 3.6 V operating range, requires decoupling capacitors close to pin. |+| 20 | PA4 | bidirectional | GPIO Port A bit 4, 5 V tolerant I/O supporting SPI1/SPI3 NSS, USART2, and DFSDM1 alternate functions with ADC1_4 analog input. |+| 21 | PA5 | bidirectional | GPIO Port A bit 5, 5 V tolerant I/O supporting TIM2/TIM8, SPI1 clock, DFSDM1, and FSMC alternate functions with ADC1_5 capability. |+| 22 | PA6 | bidirectional | GPIO Port A bit 6, 5 V tolerant I/O supporting TIM1/TIM3/TIM8/TIM13, SPI1, I2S2, QUADSPI, and SDIO alternate functions with ADC1_6. |+| 23 | PA7 | bidirectional | GPIO Port A bit 7, 5 V tolerant I/O supporting TIM1/TIM3/TIM8/TIM14, SPI1, and QUADSPI alternate functions with ADC1_7 capability. |+| 24 | PC4 | bidirectional | GPIO Port C bit 4, 5 V tolerant I/O supporting I2S1, QUADSPI, and FSMC alternate functions with ADC1_14 analog input. |+| 25 | PC5 | bidirectional | GPIO Port C bit 5, 5 V tolerant I/O supporting I2CFMP1, USART3, QUADSPI, and FSMC alternate functions with ADC1_15 capability. |+| 26 | PB0 | bidirectional | GPIO Port B bit 0, 5 V tolerant I/O supporting TIM1/TIM3/TIM8 and SPI5 alternate functions with ADC1_8 analog input. |+| 27 | PB1 | bidirectional | GPIO Port B bit 1, 5 V tolerant I/O supporting TIM1/TIM3/TIM8, SPI5, DFSDM1, and QUADSPI alternate functions with ADC1_9. |+| 28 | PB2 | bidirectional | GPIO Port B bit 2, 5 V tolerant I/O supporting DFSDM1 and QUADSPI alternate functions; BOOT1 option bit. |+| 29 | PB10 | bidirectional | GPIO Port B bit 10, 5 V tolerant I/O supporting TIM2, I2C2, SPI2, I2S3, USART3, I2CFMP1, and SDIO alternate functions. |+| 30 | VCAP_1 | passive | Internal voltage regulator output decoupling pin, requires 100 nF capacitor connected to VSS for voltage regulation stability. |+| 31 | VSS | power_in | Digital ground supply pin for core digital logic circuits. |+| 32 | VDD | power_in | Main digital power supply, 1.7 V to 3.6 V operating range, requires decoupling capacitors close to pin. |+| 33 | PB12 | bidirectional | GPIO Port B bit 12, 5 V tolerant I/O supporting TIM1, I2C2, SPI2/SPI4/SPI3, USART3, CAN2, DFSDM1, and FSMC alternate functions. |+| 34 | PB13 | bidirectional | GPIO Port B bit 13, 5 V tolerant I/O supporting TIM1, I2CFMP1, SPI2/SPI4, USART3, CAN2, and DFSDM1 alternate functions. |+| 35 | PB14 | bidirectional | GPIO Port B bit 14, 5 V tolerant I/O supporting TIM1/TIM8/TIM12, I2CFMP1, SPI2, USART3, DFSDM1, FSMC, and SDIO alternate functions. |+| 36 | PB15 | bidirectional | GPIO Port B bit 15, 5 V tolerant I/O supporting RTC output, TIM1/TIM8/TIM12, I2CFMP1, SPI2, DFSDM1, and SDIO alternate functions. |+| 55 | PB3 | bidirectional | GPIO Port B bit 3, 5 V tolerant I/O supporting JTAG/SWD debug, TIM2, I2CFMP1, SPI1/SPI3, USART1, and I2C2 alternate functions. |+| 56 | PB4 | bidirectional | GPIO Port B bit 4, 5 V tolerant I/O supporting JTAG reset, TIM3, SPI1/SPI3, I2S3, I2C3, and SDIO alternate functions. |+| 57 | PB5 | bidirectional | GPIO Port B bit 5, 5 V tolerant I/O supporting TIM3, I2C1, SPI1/SPI3, CAN2, and SDIO alternate functions. |+| 58 | PB6 | bidirectional | GPIO Port B bit 6, 5 V tolerant I/O supporting TIM4, I2C1, USART1, CAN2, QUADSPI, and SDIO alternate functions. |+| 59 | PB7 | bidirectional | GPIO Port B bit 7, 5 V tolerant I/O supporting TIM4, I2C1, USART1, and FSMC alternate functions. |+| 60 | BOOT0 | input | Boot mode selection pin sampled at power-up to select flash memory or embedded bootloader execution; requires external pull-up or pull-down. |+| 61 | PB8 | bidirectional | GPIO Port B bit 8, 5 V tolerant I/O supporting TIM4/TIM10, I2C1, SPI5, CAN1, I2C3, and SDIO alternate functions. |+| 62 | PB9 | bidirectional | GPIO Port B bit 9, 5 V tolerant I/O supporting TIM4/TIM11, I2C1, SPI2, CAN1, I2C2, and SDIO alternate functions. |+| 63 | VSS | power_in | Digital ground supply pin for core digital logic circuits. |+| 64 | VDD | power_in | Main digital power supply, 1.7 V to 3.6 V operating range, requires decoupling capacitors close to pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F412RGT6TR`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f412rgt6tr-etched.step` / `stm32f412rgt6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f412rgt6tr.step` / `stm32f412rgt6tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942390082351104) (201 pp, sha256 `d640babe702a369d`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f412rgt6tr-datasheet.pdf)
page.jsonadded+370@@ -0,0 +1,370 @@+{+ "slug": "stm32f412rgt6tr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f412rgt6tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f412rgt6tr.kicad_sym",+ "stm32f412rgt6tr.kicad_mod",+ "stm32f412rgt6tr.glb",+ "stm32f412rgt6tr.step",+ "stm32f412rgt6tr.lbr",+ "docs/hero.png",+ "docs/stm32f412rgt6tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F412RGT6TR",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 46,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942390082351104",+ "parts": {+ "symbol": "stm32f412rgt6tr.kicad_sym",+ "footprint": "stm32f412rgt6tr.kicad_mod",+ "model_3d": "stm32f412rgt6tr-etched.glb",+ "model_3d_plain": "stm32f412rgt6tr.glb",+ "model_3d_step": "stm32f412rgt6tr-etched.step",+ "model_3d_step_plain": "stm32f412rgt6tr.step",+ "lbr": "stm32f412rgt6tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2053691",+ "digikey": "497-18785-2-ND",+ "mouser": "511-STM32F412RGT6TR"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T14:26:52Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-18785-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F412RGT6TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup power supply for RTC and backup domain, 1.7 V to 3.6 V operating range."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "GPIO Port C bit 13, 5 V tolerant I/O with output speed limited to 2 MHz and maximum 30 pF load due to power switch limitation."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "GPIO Port C bit 14 / 32 kHz oscillator input, 5 V tolerant I/O except in oscillator mode."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "GPIO Port C bit 15 / 32 kHz oscillator output, 5 V tolerant I/O except in oscillator mode."+ },+ {+ "number": "5",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "GPIO Port H bit 0 / main crystal oscillator input for 4-26 MHz, 5 V tolerant I/O except in oscillator mode."+ },+ {+ "number": "6",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "GPIO Port H bit 1 / main crystal oscillator output for 4-26 MHz, 5 V tolerant I/O except in oscillator mode."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Reset input with embedded weak pull-up resistor, active low, triggers system reset or wakes from low-power modes."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "GPIO Port C bit 0, 5 V tolerant I/O with ADC1_10 analog input capability."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "GPIO Port C bit 1, 5 V tolerant I/O with ADC1_11 analog input capability."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "GPIO Port C bit 2, 5 V tolerant I/O supporting SPI2_MISO, I2S2, DFSDM1, and FSMC alternate functions with ADC1_12 capability."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "GPIO Port C bit 3, 5 V tolerant I/O supporting SPI2_MOSI, I2S2_SD, and FSMC alternate functions with ADC1_13 capability."+ },+ {+ "number": "12",+ "name": "VSSA/VREF-",+ "type": "power_in",+ "description": "Analog ground supply and negative reference voltage for ADC, must be connected to VSS through low-impedance path."+ },+ {+ "number": "13",+ "name": "VDDA/VREF+",+ "type": "power_in",+ "description": "Analog power supply and positive reference voltage for ADC, 1.7 V to 3.6 V, must be decoupled with capacitors per application design."+ },+ {+ "number": "14",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO Port A bit 0, 5 V tolerant I/O supporting TIM2/TIM5/TIM8 and USART2 alternate functions with ADC1_0 analog input."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO Port A bit 1, 5 V tolerant I/O supporting TIM2/TIM5, SPI4, and QUADSPI alternate functions with ADC1_1 analog input."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO Port A bit 2, 5 V tolerant I/O supporting TIM2/TIM5/TIM9, I2S2, USART2, and FSMC alternate functions with ADC1_2 capability."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO Port A bit 3, 5 V tolerant I/O supporting TIM2/TIM5/TIM9, I2S2, USART2, and FSMC alternate functions with ADC1_3 capability."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin for core digital logic circuits."+ },+ {+ "number": "19",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply, 1.7 V to 3.6 V operating range, requires decoupling capacitors close to pin."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO Port A bit 4, 5 V tolerant I/O supporting SPI1/SPI3 NSS, USART2, and DFSDM1 alternate functions with ADC1_4 analog input."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO Port A bit 5, 5 V tolerant I/O supporting TIM2/TIM8, SPI1 clock, DFSDM1, and FSMC alternate functions with ADC1_5 capability."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO Port A bit 6, 5 V tolerant I/O supporting TIM1/TIM3/TIM8/TIM13, SPI1, I2S2, QUADSPI, and SDIO alternate functions with ADC1_6."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO Port A bit 7, 5 V tolerant I/O supporting TIM1/TIM3/TIM8/TIM14, SPI1, and QUADSPI alternate functions with ADC1_7 capability."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO Port C bit 4, 5 V tolerant I/O supporting I2S1, QUADSPI, and FSMC alternate functions with ADC1_14 analog input."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO Port C bit 5, 5 V tolerant I/O supporting I2CFMP1, USART3, QUADSPI, and FSMC alternate functions with ADC1_15 capability."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO Port B bit 0, 5 V tolerant I/O supporting TIM1/TIM3/TIM8 and SPI5 alternate functions with ADC1_8 analog input."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO Port B bit 1, 5 V tolerant I/O supporting TIM1/TIM3/TIM8, SPI5, DFSDM1, and QUADSPI alternate functions with ADC1_9."+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO Port B bit 2, 5 V tolerant I/O supporting DFSDM1 and QUADSPI alternate functions; BOOT1 option bit."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO Port B bit 10, 5 V tolerant I/O supporting TIM2, I2C2, SPI2, I2S3, USART3, I2CFMP1, and SDIO alternate functions."+ },+ {+ "number": "30",+ "name": "VCAP_1",+ "type": "passive",+ "description": "Internal voltage regulator output decoupling pin, requires 100 nF capacitor connected to VSS for voltage regulation stability."+ },+ {+ "number": "31",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin for core digital logic circuits."+ },+ {+ "number": "32",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply, 1.7 V to 3.6 V operating range, requires decoupling capacitors close to pin."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO Port B bit 12, 5 V tolerant I/O supporting TIM1, I2C2, SPI2/SPI4/SPI3, USART3, CAN2, DFSDM1, and FSMC alternate functions."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO Port B bit 13, 5 V tolerant I/O supporting TIM1, I2CFMP1, SPI2/SPI4, USART3, CAN2, and DFSDM1 alternate functions."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO Port B bit 14, 5 V tolerant I/O supporting TIM1/TIM8/TIM12, I2CFMP1, SPI2, USART3, DFSDM1, FSMC, and SDIO alternate functions."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO Port B bit 15, 5 V tolerant I/O supporting RTC output, TIM1/TIM8/TIM12, I2CFMP1, SPI2, DFSDM1, and SDIO alternate functions."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "GPIO Port B bit 3, 5 V tolerant I/O supporting JTAG/SWD debug, TIM2, I2CFMP1, SPI1/SPI3, USART1, and I2C2 alternate functions."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "GPIO Port B bit 4, 5 V tolerant I/O supporting JTAG reset, TIM3, SPI1/SPI3, I2S3, I2C3, and SDIO alternate functions."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO Port B bit 5, 5 V tolerant I/O supporting TIM3, I2C1, SPI1/SPI3, CAN2, and SDIO alternate functions."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO Port B bit 6, 5 V tolerant I/O supporting TIM4, I2C1, USART1, CAN2, QUADSPI, and SDIO alternate functions."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO Port B bit 7, 5 V tolerant I/O supporting TIM4, I2C1, USART1, and FSMC alternate functions."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode selection pin sampled at power-up to select flash memory or embedded bootloader execution; requires external pull-up or pull-down."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO Port B bit 8, 5 V tolerant I/O supporting TIM4/TIM10, I2C1, SPI5, CAN1, I2C3, and SDIO alternate functions."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO Port B bit 9, 5 V tolerant I/O supporting TIM4/TIM11, I2C1, SPI2, CAN1, I2C2, and SDIO alternate functions."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply pin for core digital logic circuits."+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply, 1.7 V to 3.6 V operating range, requires decoupling capacitors close to pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942390082351104",+ "pages": 201,+ "sha256": "d640babe702a369d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 46,+ "described": 46,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}