master
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers Update 2 file(s) · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32f411ceu6-etched.glb Publish 0.1.0 · Ray
stm32f411ceu6-etched.step stm32f411ceu6: factory component page (tier=lcsc) · Ray
stm32f411ceu6-hero.glb stm32f411ceu6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32f411ceu6-hero.overlay.json Publish 0.1.0 · Ray
stm32f411ceu6.glb Publish 0.1.0 · Ray
stm32f411ceu6.kicad_mod Publish 0.1.0 · Ray
stm32f411ceu6.kicad_sym Publish 0.1.0 · Ray
stm32f411ceu6.lbr Publish 0.1.0 · Ray
stm32f411ceu6.step Publish 0.1.0 · Ray

STM32F411CEU6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)

STM32F411CEU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup battery supply pin for RTC and low-power domain, 1.7 V to 3.6 V.
2 PC13-ANTI_TAMP bidirectional PC13 GPIO with RTC anti-tamper, RTC output, and RTC timestamp functions, 5 V tolerant with 2 MHz max speed and 30 pF load limit.
3 PC14-OSC32_IN bidirectional PC14 GPIO with 32 kHz oscillator input function, 5 V tolerant except in oscillator mode.
4 PC15-OSC32_OUT bidirectional PC15 GPIO with 32 kHz oscillator output function, 5 V tolerant.
5 PH0-OSC_IN bidirectional PH0 GPIO with main oscillator input function, 5 V tolerant except in oscillator mode.
6 PH1-OSC_OUT bidirectional PH1 GPIO with main oscillator output function, 5 V tolerant.
7 NRST bidirectional Reset pin with embedded weak pull-up resistor, 5 V tolerant, active low reset trigger.
8 VSSA/VREF- power_in Analog ground, one pin with VREF- on UFQFPN48 (Figure 10 labels it VSSA/VREF-); VREF- is internally connected to VSSA.
9 VDDA/VREF+ power_in Analog supply and ADC positive reference, one pin on UFQFPN48 (Figure 10 labels it VDDA/VREF+); VREF+ is internally connected to VDDA.
10 PA0-WKUP bidirectional PA0 GPIO with wake-up and timer trigger capabilities, standard 3.3 V I/O, can trigger device wake-up from low-power modes.
11 PA1 bidirectional PA1 GPIO with SPI4/I2S4, USART2, timer, and ADC channel 1 functions, 5 V tolerant.
12 PA2 bidirectional PA2 GPIO with USART2 TX, timer channels, I2S2 clock, and ADC channel 2 functions, 5 V tolerant.
13 PA3 bidirectional PA3 GPIO with USART2 RX, timer channels, I2S2 clock, and ADC channel 3 functions, 5 V tolerant.
14 PA4 bidirectional PA4 GPIO with SPI1/SPI3 chip select, USART2 clock, and ADC channel 4 functions, 5 V tolerant.
15 PA5 bidirectional PA5 GPIO with SPI1 clock, timer channels, and ADC channel 5 functions, 5 V tolerant.
16 PA6 bidirectional PA6 GPIO with SPI1 MISO, SDIO command, timer brake, and ADC channel 6 functions, 5 V tolerant.
17 PA7 bidirectional PA7 GPIO with SPI1 MOSI, timer channel 1 complementary output, and ADC channel 7 functions, 5 V tolerant.
18 PB0 bidirectional PB0 GPIO with SPI5 clock, timer complementary channels, and ADC channel 8 functions, 5 V tolerant.
19 PB1 bidirectional PB1 GPIO with SPI5 chip select, timer complementary channels, and ADC channel 9 functions, 5 V tolerant.
20 PB2 bidirectional PB2 GPIO with BOOT1 function for boot mode configuration, 5 V tolerant.
21 PB10 bidirectional PB10 GPIO with I2C2 SCL, SPI2/I2S2 clock, and SDIO data functions, 5 V tolerant.
22 VCAP_1 power_in Voltage regulator output capacitor connection pin for internal voltage regulation.
23 VSS power_in Ground connection for digital circuits.
24 VDD power_in Main power supply pin, 1.7 V to 3.6 V.
25 PB12 bidirectional PB12 GPIO with SPI2/SPI3/SPI4 chip select, I2C2 alert, timer brake, and SDIO functions, 5 V tolerant.
26 PB13 bidirectional PB13 GPIO with SPI2/SPI4 clock, timer channel 1 complementary output, 5 V tolerant.
27 PB14 bidirectional PB14 GPIO with SPI2 MISO, I2S2 extended SD, SDIO data, and timer complementary output functions, 5 V tolerant.
28 PB15 bidirectional PB15 GPIO with SPI2 MOSI, RTC 50 Hz reference input, SDIO clock, and timer complementary output functions, 5 V tolerant.
29 PA8 bidirectional PA8 GPIO with MCO_1 master clock output, USART1 clock, I2C3 SCL, USB FS SOF, and SDIO data functions, 5 V tolerant.
30 PA9 bidirectional PA9 GPIO with USART1 TX, I2C3 alert, USB FS VBUS input, and SDIO data functions, 5 V tolerant.
31 PA10 bidirectional PA10 GPIO with USART1 RX, SPI5 MOSI, USB FS ID input, and timer channel functions, 5 V tolerant.
32 PA11 bidirectional PA11 GPIO with USART1 CTS, SPI4 MISO, USB FS D minus line, and timer channel functions, 5 V tolerant.
33 PA12 bidirectional PA12 GPIO with USART1 RTS, SPI5 MISO, USB FS D plus line, and timer ETR functions, 5 V tolerant.
34 PA13 bidirectional PA13 JTAG TMS and SWD IO pin for debug interface, 5 V tolerant.
35 VSS power_in Ground connection for digital circuits.
36 VDD power_in Main power supply pin, 1.7 V to 3.6 V.
37 PA14 bidirectional PA14 JTAG TCK and SWD clock pin for debug interface, 5 V tolerant.
38 PA15 bidirectional PA15 JTAG TDI and GPIO with SPI1/SPI3 chip select, USART1 TX, and timer functions, 5 V tolerant.
39 PB3 bidirectional PB3 JTAG TDO/SWO and GPIO with SPI1/SPI3 clock, USART1 RX, I2C2 SDA functions, 5 V tolerant.
40 PB4 bidirectional PB4 JTAG TRST and GPIO with SPI1/SPI3 MISO, I2C3 SDA, SDIO data functions, 5 V tolerant.
41 PB5 bidirectional PB5 GPIO with I2C1 alert, SPI1/SPI3 MOSI, SDIO data, and timer channel functions, standard 3.3 V I/O.
42 PB6 bidirectional PB6 GPIO with I2C1 SCL, USART1 TX, and timer channel functions, 5 V tolerant.
43 PB7 bidirectional PB7 GPIO with I2C1 SDA, USART1 RX, SDIO data, and timer channel functions, 5 V tolerant.
44 BOOT0 input Boot mode selection input pin, sampled during reset to determine boot source (flash or system memory), supports VPP programming voltage.
45 PB8 bidirectional PB8 GPIO with I2C1 SCL, SPI5 MOSI, I2C3 SDA, timer channels, and SDIO data functions, 5 V tolerant.
46 PB9 bidirectional PB9 GPIO with I2C1 SDA, SPI2 chip select, I2C2 SDA, timer channels, and SDIO data functions, 5 V tolerant.
47 VSS power_in Ground connection for digital circuits.
48 VDD power_in Main power supply pin, 1.7 V to 3.6 V.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-48(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD-VSS (external main supply, incl. VDDA, VDD, VBAT) VDD-VSS -0.3 4 V 60
Input voltage on any other pin VIN -0.3 4 V 60
Input voltage on FT and TC pins (minimum) VIN -0.3 V 60
Input voltage for BOOT0 VIN 9 V 60
Variations between different VDD power pins /ΔVDDx/ 50 mV 60
Variations between all the different ground pins /VSSX −VSS/ 50 mV 60
Total current into sum of all VDD_x power lines (source) ΣIVDD 160 mA 61
Total current out of sum of all VSS_x ground lines (sink) ΣIVSS -160 mA 61
Maximum current into each VDD_x power line (source) IVDD 100 mA 61
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 61
Output current sunk by any I/O and control pin IIO 25 mA 61
Output current sourced by any I/O and control pin IIO -25 mA 61
Total output current sunk by sum of all I/O and control pins ΣIIO 120 mA 61
Total output current sourced by sum of all I/Os and control pins ΣIIO -120 mA 61
Injected current on FT and TC pins IINJ(PIN) -5 0 mA 61
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 61
Storage temperature range TSTG -65 150 °C 61
Maximum junction temperature TJ 130 °C 61
Internal AHB clock frequency fHCLK 0 64 MHz Power Scale3, regulator ON, VOS[1:0]=0x01 62
Internal AHB clock frequency fHCLK 0 84 MHz Power Scale2, regulator ON, VOS[1:0]=0x10 62
Internal AHB clock frequency fHCLK 0 100 MHz Power Scale1, regulator ON, VOS[1:0]=0x11 62
Internal APB1 clock frequency fPCLK1 0 50 MHz 62
Internal APB2 clock frequency fPCLK2 0 100 MHz 62
Standard operating voltage VDD 1.7 3.6 V 62
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.7 2.4 V Must be the same potential as VDD 62
Analog operating voltage (ADC limited to 2.4 M samples) VDDA 2.4 3.6 V Must be the same potential as VDD 62
Backup operating voltage VBAT 1.65 3.6 V 62
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.08 1.14 1.2 V VOS[1:0]=0x01, max frequency 64 MHz 62
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.2 1.26 1.32 V VOS[1:0]=0x10, max frequency 84 MHz 62
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.26 1.32 1.38 V VOS[1:0]=0x11, max frequency 100 MHz 62
Input voltage on RST, FT and TC pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 62
Input voltage on RST, FT and TC pins VIN -0.3 5.2 V VDD ≤ 2 V 62
Input voltage on BOOT0 pin VIN 0 9 V 62
Power dissipation UFQFPN48 PD 625 mW TA = 85 °C (range 6) 62
Ambient temperature range 6, maximum power dissipation TA -40 85 °C Maximum power dissipation 63
Ambient temperature range 6, low power dissipation TA -40 105 °C Low power dissipation 63
Junction temperature range 6 TJ -40 105 °C Range 6 63
Capacitance of external capacitor CEXT CEXT 4.7 µF Single VCAP pin available 64
ESR of external capacitor ESR 1 Ω Single VCAP pin available 64
VDD rise time rate (regulator ON) tVDD 20 µs/V 65
VDD fall time rate (regulator ON) tVDD 20 µs/V 65
Power-on/power-down reset threshold VPOR/PDR 1.6 1.68 1.76 V Falling edge 66
Power-on/power-down reset threshold VPOR/PDR 1.64 1.72 1.8 V Rising edge 66
PDR hysteresis VPDRhyst 40 mV 66
PVD hysteresis VPVDhyst 100 mV 66
Brownout level 1 threshold VBOR1 2.13 2.19 2.24 V Falling edge 66
Brownout level 1 threshold VBOR1 2.23 2.29 2.33 V Rising edge 66
Brownout level 2 threshold VBOR2 2.44 2.5 2.56 V Falling edge 66
Brownout level 2 threshold VBOR2 2.53 2.59 2.63 V Rising edge 66
Brownout level 3 threshold VBOR3 2.75 2.83 2.88 V Falling edge 66
Brownout level 3 threshold VBOR3 2.85 2.92 2.97 V Rising edge 66
BOR hysteresis VBORhyst 100 mV 66
POR reset timing TRSTTEMPO 0.5 1.5 3 ms 66
Supply current in Standby mode, VDD=3.6 V (LSE and RTC ON) IDD_STBY 2.8 5 µA Low-speed oscillator (LSE) and RTC ON, TA = 25 °C 75
Supply current in Standby mode, VDD=3.6 V (LSE and RTC ON) IDD_STBY 14 µA Low-speed oscillator (LSE) and RTC ON, TA = 85 °C 75
Supply current in Standby mode, VDD=3.6 V (RTC and LSE OFF) IDD_STBY 2.1 4 µA RTC and LSE OFF, TA = 25 °C 75
Supply current in Standby mode, VDD=3.6 V (RTC and LSE OFF) IDD_STBY 13.5 µA RTC and LSE OFF, TA = 85 °C 75
Supply current in Stop mode, VDD=3.6 V (Flash in Deep power down, low power regulator) IDD_STOP 14 38 µA Flash in Deep power down mode, all oscillators OFF, no independent watchdog, Low power regulator usage, TA = 25 °C 75
Supply current in Stop mode, VDD=3.6 V (Flash in Deep power down, low power regulator) IDD_STOP 275 µA Flash in Deep power down mode, all oscillators OFF, no independent watchdog, Low power regulator usage, TA = 85 °C 75

CAD (KiCad official)

  • Symbol: STM32F411CEU6
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f411ceu6-etched.step / stm32f411ceu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f411ceu6.step / stm32f411ceu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (146 pp, sha256 284b85ff62b02690, retrieved 2026-11-10, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF