component
STM32F410R8T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32F410R8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F410R8T6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | VBAT supply (1.65 to 3.6 V) for RTC, 32 kHz oscillator and backup registers when VDD is absent. |+| 2 | PC13 | bidirectional | GPIO port C pin 13, 5V tolerant I/O, RTC functions; supplied through power switch limited to 3 mA current. |+| 3 | PC14-OSC32_IN | bidirectional | GPIO port C pin 14 or 32 kHz oscillator input, 5V tolerant I/O. |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO port C pin 15 or 32 kHz oscillator output, 5V tolerant I/O. |+| 5 | PH0-OSC_IN | bidirectional | GPIO port H pin 0 or 4-26 MHz oscillator input, 5V tolerant I/O (5V tolerant except in oscillator mode). |+| 6 | PH1-OSC_OUT | bidirectional | GPIO port H pin 1 or 4-26 MHz oscillator output, 5V tolerant I/O (5V tolerant except in oscillator mode). |+| 7 | NRST | bidirectional | System reset pin with embedded weak pull-up resistor for reset control. |+| 8 | PC0 | bidirectional | GPIO port C pin 0, 5V tolerant I/O with LPTIM1_IN1, ADC1_10 and WKUP2 functions. |+| 9 | PC1 | bidirectional | GPIO port C pin 1, 5V tolerant I/O with LPTIM1_OUT, ADC1_11 and WKUP3 functions. |+| 10 | PC2 | bidirectional | GPIO port C pin 2, 5V tolerant I/O with LPTIM1_IN2, SPI2_MISO and ADC1_12 functions. |+| 11 | PC3 | bidirectional | GPIO port C pin 3, 5V tolerant I/O with LPTIM1_ETR, SPI2_MOSI/I2S2_SD and ADC1_13 functions. |+| 12 | VSSA/VREF- | power_in | Analog ground and ADC negative reference voltage; must be connected to VSS with decoupling capacitor. |+| 13 | VDDA/VREF+ | power_in | Analog power supply (1.7 to 3.6 V) and ADC positive reference voltage; must be connected to VDD with decoupling capacitor. |+| 14 | PA0 | bidirectional | GPIO port A pin 0, 5V tolerant I/O with TIM5_CH1, USART2_CTS, ADC1_0 and WKUP1 functions. |+| 15 | PA1 | bidirectional | GPIO port A pin 1, 5V tolerant I/O with TIM5_CH2, USART2_RTS and ADC1_1 functions. |+| 16 | PA2 | bidirectional | GPIO port A pin 2, 5V tolerant I/O with TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX and ADC1_2 functions. |+| 17 | PA3 | bidirectional | GPIO port A pin 3, 5V tolerant I/O with TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX and ADC1_3 functions. |+| 18 | VSS | power_in | Ground reference (0 V) for power supply. |+| 19 | VDD | power_in | Main power supply input (1.7 to 3.6 V). |+| 20 | PA4 | bidirectional | GPIO port A pin 4, 5V tolerant I/O with SPI1_NSS/I2S1_WS, USART2_CK and ADC1_4 functions. |+| 21 | PA5 | bidirectional | GPIO port A pin 5, standard 3.3 V I/O with SPI1_SCK/I2S1_CK, DAC_OUT1 and ADC1_5 functions. |+| 22 | PA6 | bidirectional | GPIO port A pin 6, 5V tolerant I/O with TIM1_BKIN, SPI1_MISO, I2S2_MCK and ADC1_6 functions. |+| 23 | PA7 | bidirectional | GPIO port A pin 7, 5V tolerant I/O with TIM1_CH1N, SPI1_MOSI/I2S1_SD and ADC1_7 functions. |+| 24 | PC4 | bidirectional | GPIO port C pin 4, 5V tolerant I/O with TIM9_CH1 and ADC1_14 functions. |+| 25 | PC5 | bidirectional | GPIO port C pin 5, 5V tolerant I/O with TIM9_CH2, I2C4_SMBA and ADC1_15 functions. |+| 26 | PB0 | bidirectional | GPIO port B pin 0, 5V tolerant I/O with TIM1_CH2N, SPI5_SCK/I2S5_CK and ADC1_8 functions. |+| 27 | PB1 | bidirectional | GPIO port B pin 1, standard 3.3 V I/O with TIM1_CH3N, SPI5_NSS/I2S5_WS and ADC1_9 functions. |+| 28 | PB2 | bidirectional | GPIO port B pin 2, 5V tolerant I/O with LPTIM1_OUT and BOOT1 functions. |+| 29 | PB10 | bidirectional | GPIO port B pin 10, 5V tolerant I/O with I2C2_SCL, SPI2_SCK/I2S2_CK, I2S1_MCK and I2C4_SCL functions. |+| 30 | VCAP_1 | passive | 1 µF ceramic capacitor connection for internal voltage regulator, required for proper operation. |+| 31 | VSS | power_in | Ground reference (0 V) for power supply. |+| 32 | VDD | power_in | Main power supply input (1.7 to 3.6 V). |+| 33 | PB12 | bidirectional | GPIO port B pin 12, 5V tolerant I/O with TIM1_BKIN, TIM5_CH1, I2C2_SMBA and SPI2_NSS/I2S2_WS functions. |+| 34 | PB13 | bidirectional | GPIO port B pin 13, 5V tolerant I/O with TIM1_CH1N, I2C4_SMBA and SPI2_SCK/I2S2_CK functions. |+| 35 | PB14 | bidirectional | GPIO port B pin 14, 5V tolerant I/O with TIM1_CH2N, I2C4_SDA and SPI2_MISO functions. |+| 36 | PB15 | bidirectional | GPIO port B pin 15, 5V tolerant I/O with RTC_50Hz, TIM1_CH3N, I2C4_SCL and SPI2_MOSI/I2S2_SD functions. |+| 37 | PC6 | bidirectional | GPIO port C pin 6, 5V tolerant I/O with TRACECLK, I2C4_SCL, I2S2_MCK and USART6_TX functions. |+| 38 | PC7 | bidirectional | GPIO port C pin 7, 5V tolerant I/O with I2C4_SDA, SPI2_SCK/I2S2_CK, I2S1_MCK and USART6_RX functions. |+| 39 | PC8 | bidirectional | GPIO port C pin 8, 5V tolerant I/O with USART6_CK function. |+| 40 | PC9 | bidirectional | GPIO port C pin 9, 5V tolerant I/O with MCO_2, I2C4_SDA and I2S2_CKIN functions. |+| 41 | PA8 | bidirectional | GPIO port A pin 8, 5V tolerant I/O with MCO_1, TIM1_CH1, I2C4_SCL and USART1_CK functions. |+| 42 | PA9 | bidirectional | GPIO port A pin 9, 5V tolerant I/O with TIM1_CH2 and USART1_TX functions. |+| 43 | PA10 | bidirectional | GPIO port A pin 10, 5V tolerant I/O with TIM1_CH3, SPI5_MOSI/I2S5_SD and USART1_RX functions. |+| 44 | PA11 | bidirectional | GPIO port A pin 11, 5V tolerant I/O with TIM1_CH4, USART1_CTS and USART6_TX functions. |+| 45 | PA12 | bidirectional | GPIO port A pin 12, 5V tolerant I/O with TIM1_ETR, SPI5_MISO, USART1_RTS and USART6_RX functions. |+| 46 | PA13 | bidirectional | GPIO port A pin 13 or JTAG TMS, 5V tolerant I/O with JTMS-SWDIO for Serial Wire Debug interface. |+| 47 | VSS | power_in | Ground reference (0 V) for power supply. |+| 48 | VDD | power_in | Main power supply input (1.7 to 3.6 V). |+| 49 | PA14 | bidirectional | GPIO port A pin 14 or JTAG TCK, 5V tolerant I/O with JTCK-SWCLK for Serial Wire Debug interface. |+| 50 | PA15 | bidirectional | GPIO port A pin 15 or JTAG TDI, 5V tolerant I/O with SPI1_NSS/I2S1_WS and USART1_TX functions. |+| 51 | PC10 | bidirectional | GPIO port C pin 10, 5V tolerant I/O with TRACECLK and TIM5_CH2 functions. |+| 52 | PC11 | bidirectional | GPIO port C pin 11, 5V tolerant I/O with TRACED1 and TIM5_CH3 functions. |+| 53 | PC12 | bidirectional | GPIO port C pin 12, 5V tolerant I/O with TRACED2 and TIM11_CH1 functions. |+| 54 | PB11 | bidirectional | GPIO port B pin 11, 5V tolerant I/O with TRACED3, TIM5_CH4, I2C2_SDA and I2S2_CKIN functions. |+| 55 | PB3 | bidirectional | GPIO port B pin 3 or JTAG TDO, 5V tolerant I/O with SPI1_SCK/I2S1_CK, USART1_RX and I2C2_SDA functions. |+| 56 | PB4 | bidirectional | GPIO port B pin 4 or JTAG TRST, 5V tolerant I/O with SPI1_MISO function. |+| 57 | PB5 | bidirectional | GPIO port B pin 5, 5V tolerant I/O with LPTIM1_IN1, I2C1_SMBA and SPI1_MOSI/I2S1_SD functions. |+| 58 | PB6 | bidirectional | GPIO port B pin 6, 5V tolerant I/O with LPTIM1_ETR, I2C1_SCL and USART1_TX functions. |+| 59 | PB7 | bidirectional | GPIO port B pin 7, 5V tolerant I/O with LPTIM1_IN2, I2C1_SDA and USART1_RX functions. |+| 60 | BOOT0 | input | Boot option pin for selecting boot source (user Flash memory or system memory) on power-on reset. |+| 61 | PB8 | bidirectional | GPIO port B pin 8, 5V tolerant I/O with LPTIM1_OUT, I2C1_SCL and SPI5_MOSI/I2S5_SD functions. |+| 62 | PB9 | bidirectional | GPIO port B pin 9, 5V tolerant I/O with TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS and I2C2_SDA functions. |+| 63 | VSS | power_in | Ground reference (0 V) for power supply. |+| 64 | VDD | power_in | Main power supply input (1.7 to 3.6 V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F410R8T6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f410r8t6-etched.step` / `stm32f410r8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f410r8t6.step` / `stm32f410r8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912095284244480) (143 pp, sha256 `71946dd94c3eb53f`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f410r8t6-datasheet.pdf)
page.jsonadded+493@@ -0,0 +1,493 @@+{+ "slug": "stm32f410r8t6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f410r8t6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f410r8t6.kicad_sym",+ "stm32f410r8t6.kicad_mod",+ "stm32f410r8t6.glb",+ "stm32f410r8t6.step",+ "stm32f410r8t6.lbr",+ "docs/hero.png",+ "docs/stm32f410r8t6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f410r8t6-hero.glb",+ "stm32f410r8t6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F410R8T6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912095284244480",+ "parts": {+ "symbol": "stm32f410r8t6.kicad_sym",+ "footprint": "stm32f410r8t6.kicad_mod",+ "model_3d": "stm32f410r8t6-hero.glb",+ "model_3d_plain": "stm32f410r8t6.glb",+ "model_3d_step": "stm32f410r8t6-etched.step",+ "model_3d_step_plain": "stm32f410r8t6.step",+ "lbr": "stm32f410r8t6.lbr"+ },+ "distributor_links": {+ "lcsc": 443972,+ "digikey": "497-18544-ND",+ "mouser": "511-STM32F410R8T6"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T17:26:50Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-18544-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F410R8T6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "VBAT supply (1.65 to 3.6 V) for RTC, 32 kHz oscillator and backup registers when VDD is absent."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "GPIO port C pin 13, 5V tolerant I/O, RTC functions; supplied through power switch limited to 3 mA current."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "GPIO port C pin 14 or 32 kHz oscillator input, 5V tolerant I/O."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "GPIO port C pin 15 or 32 kHz oscillator output, 5V tolerant I/O."+ },+ {+ "number": "5",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "GPIO port H pin 0 or 4-26 MHz oscillator input, 5V tolerant I/O (5V tolerant except in oscillator mode)."+ },+ {+ "number": "6",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "GPIO port H pin 1 or 4-26 MHz oscillator output, 5V tolerant I/O (5V tolerant except in oscillator mode)."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "System reset pin with embedded weak pull-up resistor for reset control."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "GPIO port C pin 0, 5V tolerant I/O with LPTIM1_IN1, ADC1_10 and WKUP2 functions."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "GPIO port C pin 1, 5V tolerant I/O with LPTIM1_OUT, ADC1_11 and WKUP3 functions."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "GPIO port C pin 2, 5V tolerant I/O with LPTIM1_IN2, SPI2_MISO and ADC1_12 functions."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "GPIO port C pin 3, 5V tolerant I/O with LPTIM1_ETR, SPI2_MOSI/I2S2_SD and ADC1_13 functions."+ },+ {+ "number": "12",+ "name": "VSSA/VREF-",+ "type": "power_in",+ "description": "Analog ground and ADC negative reference voltage; must be connected to VSS with decoupling capacitor."+ },+ {+ "number": "13",+ "name": "VDDA/VREF+",+ "type": "power_in",+ "description": "Analog power supply (1.7 to 3.6 V) and ADC positive reference voltage; must be connected to VDD with decoupling capacitor."+ },+ {+ "number": "14",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO port A pin 0, 5V tolerant I/O with TIM5_CH1, USART2_CTS, ADC1_0 and WKUP1 functions."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO port A pin 1, 5V tolerant I/O with TIM5_CH2, USART2_RTS and ADC1_1 functions."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO port A pin 2, 5V tolerant I/O with TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX and ADC1_2 functions."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO port A pin 3, 5V tolerant I/O with TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX and ADC1_3 functions."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for power supply."+ },+ {+ "number": "19",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply input (1.7 to 3.6 V)."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO port A pin 4, 5V tolerant I/O with SPI1_NSS/I2S1_WS, USART2_CK and ADC1_4 functions."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO port A pin 5, standard 3.3 V I/O with SPI1_SCK/I2S1_CK, DAC_OUT1 and ADC1_5 functions."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO port A pin 6, 5V tolerant I/O with TIM1_BKIN, SPI1_MISO, I2S2_MCK and ADC1_6 functions."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO port A pin 7, 5V tolerant I/O with TIM1_CH1N, SPI1_MOSI/I2S1_SD and ADC1_7 functions."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO port C pin 4, 5V tolerant I/O with TIM9_CH1 and ADC1_14 functions."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO port C pin 5, 5V tolerant I/O with TIM9_CH2, I2C4_SMBA and ADC1_15 functions."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO port B pin 0, 5V tolerant I/O with TIM1_CH2N, SPI5_SCK/I2S5_CK and ADC1_8 functions."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO port B pin 1, standard 3.3 V I/O with TIM1_CH3N, SPI5_NSS/I2S5_WS and ADC1_9 functions."+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO port B pin 2, 5V tolerant I/O with LPTIM1_OUT and BOOT1 functions."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO port B pin 10, 5V tolerant I/O with I2C2_SCL, SPI2_SCK/I2S2_CK, I2S1_MCK and I2C4_SCL functions."+ },+ {+ "number": "30",+ "name": "VCAP_1",+ "type": "passive",+ "description": "1 µF ceramic capacitor connection for internal voltage regulator, required for proper operation."+ },+ {+ "number": "31",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for power supply."+ },+ {+ "number": "32",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply input (1.7 to 3.6 V)."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO port B pin 12, 5V tolerant I/O with TIM1_BKIN, TIM5_CH1, I2C2_SMBA and SPI2_NSS/I2S2_WS functions."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO port B pin 13, 5V tolerant I/O with TIM1_CH1N, I2C4_SMBA and SPI2_SCK/I2S2_CK functions."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO port B pin 14, 5V tolerant I/O with TIM1_CH2N, I2C4_SDA and SPI2_MISO functions."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO port B pin 15, 5V tolerant I/O with RTC_50Hz, TIM1_CH3N, I2C4_SCL and SPI2_MOSI/I2S2_SD functions."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "GPIO port C pin 6, 5V tolerant I/O with TRACECLK, I2C4_SCL, I2S2_MCK and USART6_TX functions."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "GPIO port C pin 7, 5V tolerant I/O with I2C4_SDA, SPI2_SCK/I2S2_CK, I2S1_MCK and USART6_RX functions."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "GPIO port C pin 8, 5V tolerant I/O with USART6_CK function."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "GPIO port C pin 9, 5V tolerant I/O with MCO_2, I2C4_SDA and I2S2_CKIN functions."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO port A pin 8, 5V tolerant I/O with MCO_1, TIM1_CH1, I2C4_SCL and USART1_CK functions."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO port A pin 9, 5V tolerant I/O with TIM1_CH2 and USART1_TX functions."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO port A pin 10, 5V tolerant I/O with TIM1_CH3, SPI5_MOSI/I2S5_SD and USART1_RX functions."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO port A pin 11, 5V tolerant I/O with TIM1_CH4, USART1_CTS and USART6_TX functions."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO port A pin 12, 5V tolerant I/O with TIM1_ETR, SPI5_MISO, USART1_RTS and USART6_RX functions."+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "GPIO port A pin 13 or JTAG TMS, 5V tolerant I/O with JTMS-SWDIO for Serial Wire Debug interface."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for power supply."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply input (1.7 to 3.6 V)."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "GPIO port A pin 14 or JTAG TCK, 5V tolerant I/O with JTCK-SWCLK for Serial Wire Debug interface."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "GPIO port A pin 15 or JTAG TDI, 5V tolerant I/O with SPI1_NSS/I2S1_WS and USART1_TX functions."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "GPIO port C pin 10, 5V tolerant I/O with TRACECLK and TIM5_CH2 functions."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "GPIO port C pin 11, 5V tolerant I/O with TRACED1 and TIM5_CH3 functions."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "GPIO port C pin 12, 5V tolerant I/O with TRACED2 and TIM11_CH1 functions."+ },+ {+ "number": "54",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO port B pin 11, 5V tolerant I/O with TRACED3, TIM5_CH4, I2C2_SDA and I2S2_CKIN functions."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "GPIO port B pin 3 or JTAG TDO, 5V tolerant I/O with SPI1_SCK/I2S1_CK, USART1_RX and I2C2_SDA functions."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "GPIO port B pin 4 or JTAG TRST, 5V tolerant I/O with SPI1_MISO function."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO port B pin 5, 5V tolerant I/O with LPTIM1_IN1, I2C1_SMBA and SPI1_MOSI/I2S1_SD functions."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO port B pin 6, 5V tolerant I/O with LPTIM1_ETR, I2C1_SCL and USART1_TX functions."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO port B pin 7, 5V tolerant I/O with LPTIM1_IN2, I2C1_SDA and USART1_RX functions."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot option pin for selecting boot source (user Flash memory or system memory) on power-on reset."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO port B pin 8, 5V tolerant I/O with LPTIM1_OUT, I2C1_SCL and SPI5_MOSI/I2S5_SD functions."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO port B pin 9, 5V tolerant I/O with TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS and I2C2_SDA functions."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for power supply."+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply input (1.7 to 3.6 V)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 51,+ "cost_usd": 0.4147,+ "at": "2026-10-06T17:26:24"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912095284244480",+ "pages": 143,+ "sha256": "71946dd94c3eb53f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}