component

STM32F410R8T6

Public Made by Adom

by adom

STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.

componentembedded processors & controllersstm32f410r8t6factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

STM32F410R8T6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32F410R8T6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in VBAT supply (1.65 to 3.6 V) for RTC, 32 kHz oscillator and backup registers when VDD is absent.
2 PC13 bidirectional GPIO port C pin 13, 5V tolerant I/O, RTC functions; supplied through power switch limited to 3 mA current.
3 PC14-OSC32_IN bidirectional GPIO port C pin 14 or 32 kHz oscillator input, 5V tolerant I/O.
4 PC15-OSC32_OUT bidirectional GPIO port C pin 15 or 32 kHz oscillator output, 5V tolerant I/O.
5 PH0-OSC_IN bidirectional GPIO port H pin 0 or 4-26 MHz oscillator input, 5V tolerant I/O (5V tolerant except in oscillator mode).
6 PH1-OSC_OUT bidirectional GPIO port H pin 1 or 4-26 MHz oscillator output, 5V tolerant I/O (5V tolerant except in oscillator mode).
7 NRST bidirectional System reset pin with embedded weak pull-up resistor for reset control.
8 PC0 bidirectional GPIO port C pin 0, 5V tolerant I/O with LPTIM1_IN1, ADC1_10 and WKUP2 functions.
9 PC1 bidirectional GPIO port C pin 1, 5V tolerant I/O with LPTIM1_OUT, ADC1_11 and WKUP3 functions.
10 PC2 bidirectional GPIO port C pin 2, 5V tolerant I/O with LPTIM1_IN2, SPI2_MISO and ADC1_12 functions.
11 PC3 bidirectional GPIO port C pin 3, 5V tolerant I/O with LPTIM1_ETR, SPI2_MOSI/I2S2_SD and ADC1_13 functions.
12 VSSA/VREF- power_in Analog ground and ADC negative reference voltage; must be connected to VSS with decoupling capacitor.
13 VDDA/VREF+ power_in Analog power supply (1.7 to 3.6 V) and ADC positive reference voltage; must be connected to VDD with decoupling capacitor.
14 PA0 bidirectional GPIO port A pin 0, 5V tolerant I/O with TIM5_CH1, USART2_CTS, ADC1_0 and WKUP1 functions.
15 PA1 bidirectional GPIO port A pin 1, 5V tolerant I/O with TIM5_CH2, USART2_RTS and ADC1_1 functions.
16 PA2 bidirectional GPIO port A pin 2, 5V tolerant I/O with TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX and ADC1_2 functions.
17 PA3 bidirectional GPIO port A pin 3, 5V tolerant I/O with TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX and ADC1_3 functions.
18 VSS power_in Ground reference (0 V) for power supply.
19 VDD power_in Main power supply input (1.7 to 3.6 V).
20 PA4 bidirectional GPIO port A pin 4, 5V tolerant I/O with SPI1_NSS/I2S1_WS, USART2_CK and ADC1_4 functions.
21 PA5 bidirectional GPIO port A pin 5, standard 3.3 V I/O with SPI1_SCK/I2S1_CK, DAC_OUT1 and ADC1_5 functions.
22 PA6 bidirectional GPIO port A pin 6, 5V tolerant I/O with TIM1_BKIN, SPI1_MISO, I2S2_MCK and ADC1_6 functions.
23 PA7 bidirectional GPIO port A pin 7, 5V tolerant I/O with TIM1_CH1N, SPI1_MOSI/I2S1_SD and ADC1_7 functions.
24 PC4 bidirectional GPIO port C pin 4, 5V tolerant I/O with TIM9_CH1 and ADC1_14 functions.
25 PC5 bidirectional GPIO port C pin 5, 5V tolerant I/O with TIM9_CH2, I2C4_SMBA and ADC1_15 functions.
26 PB0 bidirectional GPIO port B pin 0, 5V tolerant I/O with TIM1_CH2N, SPI5_SCK/I2S5_CK and ADC1_8 functions.
27 PB1 bidirectional GPIO port B pin 1, standard 3.3 V I/O with TIM1_CH3N, SPI5_NSS/I2S5_WS and ADC1_9 functions.
28 PB2 bidirectional GPIO port B pin 2, 5V tolerant I/O with LPTIM1_OUT and BOOT1 functions.
29 PB10 bidirectional GPIO port B pin 10, 5V tolerant I/O with I2C2_SCL, SPI2_SCK/I2S2_CK, I2S1_MCK and I2C4_SCL functions.
30 VCAP_1 passive 1 µF ceramic capacitor connection for internal voltage regulator, required for proper operation.
31 VSS power_in Ground reference (0 V) for power supply.
32 VDD power_in Main power supply input (1.7 to 3.6 V).
33 PB12 bidirectional GPIO port B pin 12, 5V tolerant I/O with TIM1_BKIN, TIM5_CH1, I2C2_SMBA and SPI2_NSS/I2S2_WS functions.
34 PB13 bidirectional GPIO port B pin 13, 5V tolerant I/O with TIM1_CH1N, I2C4_SMBA and SPI2_SCK/I2S2_CK functions.
35 PB14 bidirectional GPIO port B pin 14, 5V tolerant I/O with TIM1_CH2N, I2C4_SDA and SPI2_MISO functions.
36 PB15 bidirectional GPIO port B pin 15, 5V tolerant I/O with RTC_50Hz, TIM1_CH3N, I2C4_SCL and SPI2_MOSI/I2S2_SD functions.
37 PC6 bidirectional GPIO port C pin 6, 5V tolerant I/O with TRACECLK, I2C4_SCL, I2S2_MCK and USART6_TX functions.
38 PC7 bidirectional GPIO port C pin 7, 5V tolerant I/O with I2C4_SDA, SPI2_SCK/I2S2_CK, I2S1_MCK and USART6_RX functions.
39 PC8 bidirectional GPIO port C pin 8, 5V tolerant I/O with USART6_CK function.
40 PC9 bidirectional GPIO port C pin 9, 5V tolerant I/O with MCO_2, I2C4_SDA and I2S2_CKIN functions.
41 PA8 bidirectional GPIO port A pin 8, 5V tolerant I/O with MCO_1, TIM1_CH1, I2C4_SCL and USART1_CK functions.
42 PA9 bidirectional GPIO port A pin 9, 5V tolerant I/O with TIM1_CH2 and USART1_TX functions.
43 PA10 bidirectional GPIO port A pin 10, 5V tolerant I/O with TIM1_CH3, SPI5_MOSI/I2S5_SD and USART1_RX functions.
44 PA11 bidirectional GPIO port A pin 11, 5V tolerant I/O with TIM1_CH4, USART1_CTS and USART6_TX functions.
45 PA12 bidirectional GPIO port A pin 12, 5V tolerant I/O with TIM1_ETR, SPI5_MISO, USART1_RTS and USART6_RX functions.
46 PA13 bidirectional GPIO port A pin 13 or JTAG TMS, 5V tolerant I/O with JTMS-SWDIO for Serial Wire Debug interface.
47 VSS power_in Ground reference (0 V) for power supply.
48 VDD power_in Main power supply input (1.7 to 3.6 V).
49 PA14 bidirectional GPIO port A pin 14 or JTAG TCK, 5V tolerant I/O with JTCK-SWCLK for Serial Wire Debug interface.
50 PA15 bidirectional GPIO port A pin 15 or JTAG TDI, 5V tolerant I/O with SPI1_NSS/I2S1_WS and USART1_TX functions.
51 PC10 bidirectional GPIO port C pin 10, 5V tolerant I/O with TRACECLK and TIM5_CH2 functions.
52 PC11 bidirectional GPIO port C pin 11, 5V tolerant I/O with TRACED1 and TIM5_CH3 functions.
53 PC12 bidirectional GPIO port C pin 12, 5V tolerant I/O with TRACED2 and TIM11_CH1 functions.
54 PB11 bidirectional GPIO port B pin 11, 5V tolerant I/O with TRACED3, TIM5_CH4, I2C2_SDA and I2S2_CKIN functions.
55 PB3 bidirectional GPIO port B pin 3 or JTAG TDO, 5V tolerant I/O with SPI1_SCK/I2S1_CK, USART1_RX and I2C2_SDA functions.
56 PB4 bidirectional GPIO port B pin 4 or JTAG TRST, 5V tolerant I/O with SPI1_MISO function.
57 PB5 bidirectional GPIO port B pin 5, 5V tolerant I/O with LPTIM1_IN1, I2C1_SMBA and SPI1_MOSI/I2S1_SD functions.
58 PB6 bidirectional GPIO port B pin 6, 5V tolerant I/O with LPTIM1_ETR, I2C1_SCL and USART1_TX functions.
59 PB7 bidirectional GPIO port B pin 7, 5V tolerant I/O with LPTIM1_IN2, I2C1_SDA and USART1_RX functions.
60 BOOT0 input Boot option pin for selecting boot source (user Flash memory or system memory) on power-on reset.
61 PB8 bidirectional GPIO port B pin 8, 5V tolerant I/O with LPTIM1_OUT, I2C1_SCL and SPI5_MOSI/I2S5_SD functions.
62 PB9 bidirectional GPIO port B pin 9, 5V tolerant I/O with TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS and I2C2_SDA functions.
63 VSS power_in Ground reference (0 V) for power supply.
64 VDD power_in Main power supply input (1.7 to 3.6 V).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32F410R8T6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f410r8t6-etched.step / stm32f410r8t6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f410r8t6.step / stm32f410r8t6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (143 pp, sha256 71946dd94c3eb53f, retrieved 2026-10-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF