Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F407ZET7

STMicroelectronics · ST Microelectronics · LQFP-144(20x20)

STM32F407ZET7 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V tolerant I/O (FT); alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT.
2 PE3 bidirectional 5 V tolerant I/O (FT); alternate functions TRACED0, FSMC_A19, EVENTOUT.
3 PE4 bidirectional 5 V tolerant I/O (FT); alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT.
4 PE5 bidirectional 5 V tolerant I/O (FT); alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT.
5 PE6 bidirectional 5 V tolerant I/O (FT); alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT.
6 VBAT power_in Backup-domain supply for RTC, 20x32-bit backup registers and optional 4 KB backup SRAM.
7 PC13 bidirectional 5 V tolerant I/O (FT) supplied through the power switch, limited to 3 mA sink; speed at most 2 MHz with 30 pF load and must not drive LEDs; alternate function RTC_OUT, RTC_TAMP1, RTC_TS.
8 PC14/OSC32_IN bidirectional 5 V tolerant I/O (FT) supplied through the power switch, limited to 3 mA sink and 2 MHz output speed at 30 pF; additional function OSC32_IN.
9 PC15/OSC32_OUT bidirectional 5 V tolerant I/O (FT) supplied through the power switch, limited to 3 mA sink and 2 MHz output speed at 30 pF; additional function OSC32_OUT.
10 PF0 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A0, I2C2_SDA, EVENTOUT.
11 PF1 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A1, I2C2_SCL, EVENTOUT.
12 PF2 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A2, I2C2_SMBA, EVENTOUT.
13 PF3 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions FSMC_A3, EVENTOUT; additional function ADC3_IN9.
14 PF4 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions FSMC_A4, EVENTOUT; additional function ADC3_IN14.
15 PF5 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions FSMC_A5, EVENTOUT; additional function ADC3_IN15.
16 VSS power_in Ground pin (type S) for the device.
17 VDD power_in Digital supply pin (type S).
18 PF6 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions TIM10_CH1, FSMC_NIORD, EVENTOUT; additional function ADC3_IN4.
19 PF7 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions TIM11_CH1, FSMC_NREG, EVENTOUT; additional function ADC3_IN5.
20 PF8 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions TIM13_CH1, FSMC_NIOWR, EVENTOUT; additional function ADC3_IN6.
21 PF9 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions TIM14_CH1, FSMC_CD, EVENTOUT; additional function ADC3_IN7.
22 PF10 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions FSMC_INTR, EVENTOUT; additional function ADC3_IN8.
23 PH0/OSC_IN bidirectional 5 V tolerant I/O (FT, except in oscillator mode); alternate function EVENTOUT; additional function OSC_IN.
24 PH1/OSC_OUT bidirectional 5 V tolerant I/O (FT, except in oscillator mode); alternate function EVENTOUT; additional function OSC_OUT.
25 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
26 PC0 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions OTG_HS_ULPI_STP, EVENTOUT; additional function ADC123_IN10.
27 PC1 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate function ETH_MDC, EVENTOUT; additional function ADC123_IN11.
28 PC2 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, I2S2ext_SD, EVENTOUT; additional function ADC123_IN12.
29 PC3 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT; additional function ADC123_IN13.
30 VDD power_in Digital supply pin (type S).
31 VSSA power_in Analog ground pin (type S).
32 VREF+ power_in Positive reference voltage pin (type S).
33 VDDA power_in Analog supply pin (type S).
34 PA0/WKUP bidirectional 5 V tolerant I/O (FT); alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT; additional functions ADC123_IN0 and WKUP.
35 PA1 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT; additional function ADC123_IN1.
36 PA2 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT; additional function ADC123_IN2.
37 PA3 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT; additional function ADC123_IN3.
38 VSS power_in Ground pin (type S).
39 VDD power_in Digital supply pin (type S).
40 PA4 bidirectional 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT; additional functions ADC12_IN4 and DAC_OUT1.
41 PA5 bidirectional 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT; additional functions ADC12_IN5 and DAC_OUT2.
42 PA6 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT; additional function ADC12_IN6.
43 PA7 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT; additional function ADC12_IN7.
44 PC4 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions ETH_RMII_RX_D0, ETH_MII_RX_D0, EVENTOUT; additional function ADC12_IN14.
45 PC5 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions ETH_RMII_RX_D1, ETH_MII_RX_D1, EVENTOUT; additional function ADC12_IN15.
46 PB0 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT; additional function ADC12_IN8.
47 PB1 bidirectional 5 V tolerant I/O (FT, except in analog mode); alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT; additional function ADC12_IN9.
48 PB2/BOOT1 bidirectional 5 V tolerant I/O (FT); alternate function EVENTOUT; also named BOOT1 in the pin definition.
49 PF11 bidirectional 5 V tolerant I/O (FT); alternate functions DCMI_D12, EVENTOUT.
50 PF12 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A6, EVENTOUT.
51 VSS power_in Ground pin (type S).
52 VDD power_in Digital supply pin (type S).
53 PF13 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A7, EVENTOUT.
54 PF14 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A8, EVENTOUT.
55 PF15 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A9, EVENTOUT.
56 PG0 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A10, EVENTOUT.
57 PG1 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A11, EVENTOUT.
58 PE7 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D4, TIM1_ETR, EVENTOUT.
59 PE8 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT.
60 PE9 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D6, TIM1_CH1, EVENTOUT.
61 VSS power_in Ground pin (type S).
62 VDD power_in Digital supply pin (type S).
63 PE10 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT.
64 PE11 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D8, TIM1_CH2, EVENTOUT.
65 PE12 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT.
66 PE13 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D10, TIM1_CH3, EVENTOUT.
67 PE14 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D11, TIM1_CH4, EVENTOUT.
68 PE15 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT.
69 PB10 bidirectional 5 V tolerant I/O (FT); alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT.
70 PB11 bidirectional 5 V tolerant I/O (FT); alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, ETH_RMII_TX_EN, TIM2_CH4, EVENTOUT.
71 VCAP_1 power_in Connection for the external capacitor of the internal voltage regulator (see section 6.3.2).
72 VDD power_in Digital supply pin (type S).
73 PB12 bidirectional 5 V tolerant I/O (FT); alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT.
74 PB13 bidirectional 5 V tolerant I/O (FT); alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT; additional function OTG_HS_VBUS.
75 PB14 bidirectional 5 V tolerant I/O (FT); alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, I2S2ext_SD, EVENTOUT.
76 PB15 bidirectional 5 V tolerant I/O (FT); alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, EVENTOUT; additional function RTC_REFIN.
77 PD8 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D13, USART3_TX, EVENTOUT.
78 PD9 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D14, USART3_RX, EVENTOUT.
79 PD10 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D15, USART3_CK, EVENTOUT.
80 PD11 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_CLE, FSMC_A16, USART3_CTS, EVENTOUT.
81 PD12 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_ALE, FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT.
82 PD13 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A18, TIM4_CH2, EVENTOUT.
83 VSS power_in Ground pin (type S).
84 VDD power_in Digital supply pin (type S).
85 PD14 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D0, TIM4_CH3, EVENTOUT.
86 PD15 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D1, TIM4_CH4, EVENTOUT.
87 PG2 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A12, EVENTOUT.
88 PG3 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A13, EVENTOUT.
89 PG4 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A14, EVENTOUT.
90 PG5 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A15, EVENTOUT.
91 PG6 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_INT2, EVENTOUT.
92 PG7 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_INT3, USART6_CK, EVENTOUT.
93 PG8 bidirectional 5 V tolerant I/O (FT); alternate functions USART6_RTS, ETH_PPS_OUT, EVENTOUT.
94 VSS power_in Ground pin (type S).
95 VDD power_in Digital supply pin (type S).
96 PC6 bidirectional 5 V tolerant I/O (FT); alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT.
97 PC7 bidirectional 5 V tolerant I/O (FT); alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT.
98 PC8 bidirectional 5 V tolerant I/O (FT); alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT.
99 PC9 bidirectional 5 V tolerant I/O (FT); alternate functions I2S_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT.
100 PA8 bidirectional 5 V tolerant I/O (FT); alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT.
101 PA9 bidirectional 5 V tolerant I/O (FT); alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT; additional function OTG_FS_VBUS.
102 PA10 bidirectional 5 V tolerant I/O (FT); alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT.
103 PA11 bidirectional 5 V tolerant I/O (FT); alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT.
104 PA12 bidirectional 5 V tolerant I/O (FT); alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT.
105 PA13 bidirectional 5 V tolerant I/O (FT); reset function JTMS-SWDIO; alternate function EVENTOUT.
106 VCAP_2 power_in Connection for the external capacitor of the internal voltage regulator (see section 6.3.2).
107 VSS power_in Ground pin (type S).
108 VDD power_in Digital supply pin (type S).
109 PA14 bidirectional 5 V tolerant I/O (FT); reset function JTCK-SWCLK; alternate function EVENTOUT.
110 PA15 bidirectional 5 V tolerant I/O (FT); reset function JTDI; alternate functions JTDI, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT.
111 PC10 bidirectional 5 V tolerant I/O (FT); alternate functions SPI3_SCK, I2S3_CK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT.
112 PC11 bidirectional 5 V tolerant I/O (FT); alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, I2S3ext_SD, EVENTOUT.
113 PC12 bidirectional 5 V tolerant I/O (FT); alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT.
114 PD0 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D2, CAN1_RX, EVENTOUT.
115 PD1 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_D3, CAN1_TX, EVENTOUT.
116 PD2 bidirectional 5 V tolerant I/O (FT); alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT.
117 PD3 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_CLK, USART2_CTS, EVENTOUT.
118 PD4 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NOE, USART2_RTS, EVENTOUT.
119 PD5 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NWE, USART2_TX, EVENTOUT.
120 VSS power_in Ground pin (type S).
121 VDD power_in Digital supply pin (type S).
122 PD6 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT.
123 PD7 bidirectional 5 V tolerant I/O (FT); alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT.
124 PG9 bidirectional 5 V tolerant I/O (FT); alternate functions USART6_RX, FSMC_NE2, FSMC_NCE3, EVENTOUT.
125 PG10 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NCE4_1, FSMC_NE3, EVENTOUT.
126 PG11 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NCE4_2, ETH_MII_TX_EN, ETH_RMII_TX_EN, EVENTOUT.
127 PG12 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NE4, USART6_RTS, EVENTOUT.
128 PG13 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A24, USART6_CTS, ETH_MII_TXD0, ETH_RMII_TXD0, EVENTOUT.
129 PG14 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_A25, USART6_TX, ETH_MII_TXD1, ETH_RMII_TXD1, EVENTOUT.
130 VSS power_in Ground pin (type S).
131 VDD power_in Digital supply pin (type S).
132 PG15 bidirectional 5 V tolerant I/O (FT); alternate functions USART6_CTS, DCMI_D13, EVENTOUT.
133 PB3/JTDO/TRACESWO bidirectional 5 V tolerant I/O (FT); reset function JTDO/TRACESWO; alternate functions SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, EVENTOUT.
134 PB4/NJTRST bidirectional 5 V tolerant I/O (FT); reset function NJTRST; alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, I2S3ext_SD, EVENTOUT.
135 PB5 bidirectional 5 V tolerant I/O (FT); alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT.
136 PB6 bidirectional 5 V tolerant I/O (FT); alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT.
137 PB7 bidirectional 5 V tolerant I/O (FT); alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT.
138 BOOT0 input Dedicated BOOT0 boot-mode input pin; also used as VPP for flash programming.
139 PB8 bidirectional 5 V tolerant I/O (FT); alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT.
140 PB9 bidirectional 5 V tolerant I/O (FT); alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT.
141 PE0 bidirectional 5 V tolerant I/O (FT); alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT.
142 PE1 bidirectional 5 V tolerant I/O (FT); alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT.
143 PDR_ON input 5 V tolerant input (FT) for the power-down reset control pin.
144 VDD power_in Digital supply pin (type S).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-144(20x20)
Category Embedded Processors & Controllers
Pins 144

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD-VSS (external main supply, incl. VDDA, VDD) VDD-VSS -0.3 4 V 80
Input voltage on any other pin VIN 4 V 80
Variations between different VDD power pins /ΔVDDx/ 50 mV 80
Variations between all the different ground pins including VREF− /VSSX −VSS/ 50 mV 80
Total current into VDD power lines (source) IVDD 240 mA 81
Total current out of VSS ground lines (sink) IVSS 240 mA 81
Output current sunk by any I/O and control pin IIO 25 mA 81
Output current source by any I/Os and control pin IIO 25 mA 81
Injected current on five-volt tolerant I/O IINJ(PIN) -5 0 mA 81
Injected current on any other pin IINJ(PIN) -5 5 mA 81
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 81
Storage temperature range TSTG -65 150 °C 81
Maximum junction temperature TJ 125 °C 81
Internal AHB clock frequency fHCLK 0 144 MHz VOS bit in PWR_CR register = 0 81
Internal AHB clock frequency fHCLK 0 168 MHz VOS bit in PWR_CR register = 1 81
Internal APB1 clock frequency fPCLK1 0 42 MHz 81
Internal APB2 clock frequency fPCLK2 0 84 MHz 81
Standard operating voltage VDD 1.8 3.6 V 81
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.8 2.4 V ADC limited to 1.2 M samples 81
Analog operating voltage (ADC limited to 1.4 M samples) VDDA 2.4 3.6 V ADC limited to 1.4 M samples 81
Backup operating voltage VBAT 1.65 3.6 V 81
1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) V12 1.08 1.14 1.2 V Regulator ON, VOS bit = 0, max frequency 144 MHz 82
1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) V12 1.2 1.26 1.32 V Regulator ON, VOS bit = 1, max frequency 168 MHz 82
1.2 V external voltage on VCAP_1/VCAP_2 pins (regulator OFF) V12 1.1 1.14 1.2 V Regulator OFF, max frequency 144 MHz 82
1.2 V external voltage on VCAP_1/VCAP_2 pins (regulator OFF) V12 1.2 1.26 1.3 V Regulator OFF, max frequency 168 MHz 82
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 82
Input voltage on RST and FT pins VIN -0.3 5.2 V VDD ≤ 2 V 82
Input voltage on TTa pins VIN -0.3 V 82
Input voltage on B pin VIN 5.5 V 82
Power dissipation LQFP144 PD 500 mW TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 82
Ambient temperature, 7 suffix version, maximum power dissipation TA -40 105 °C Maximum power dissipation 82
Ambient temperature, 7 suffix version, low-power dissipation TA -40 125 °C Low-power dissipation 82
Junction temperature range, 7 suffix version TJ -40 125 °C 7 suffix version 82
ESR of external capacitor ESR 2 Ω ESR of external capacitor 84
VDD rise time rate (regulator ON) tVDD 20 µs/V Power-up 84
VDD fall time rate (regulator ON) tVDD 20 µs/V Power-down 84
Power-on/power-down reset threshold VPOR/PDR 1.6 1.68 1.76 V Falling edge 85
Power-on/power-down reset threshold VPOR/PDR 1.64 1.72 1.8 V Rising edge 85
Brownout level 1 threshold VBOR1 2.13 2.19 2.24 V Falling edge 85
Brownout level 1 threshold VBOR1 2.23 2.29 2.33 V Rising edge 85
Brownout level 2 threshold VBOR2 2.44 2.5 2.56 V Falling edge 86
Brownout level 2 threshold VBOR2 2.53 2.59 2.63 V Rising edge 86
Brownout level 3 threshold VBOR3 2.75 2.83 2.88 V Falling edge 86
Brownout level 3 threshold VBOR3 2.85 2.92 2.97 V Rising edge 86
Reset temporization TRSTTEMPO 0.5 1.5 3 ms 86
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH 160 200 mA 86
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH 5.4 µC VDD = 1.8 V, TA = 105 °C, IRUSH = 171 mA for 31 µs 86
High-speed external user clock source frequency fHSE_ext 1 50 MHz 101
OSC_IN high or low time tw(HSE) 5 ns 101
OSC_IN rise or fall time tr(HSE)/tf(HSE) 10 ns 101
Duty cycle (HSE external clock) DuCy(HSE) 45 55 % 101
OSC_IN input leakage current IL -1 1 µA VSS ≤ VIN ≤ VDD 101
Wakeup from Standby mode tWUSTDBY 260 375 480 µs 101
Wakeup from Stop mode (regulator in low-power mode and flash memory in Stop mode) tWUSTOP 17 40 µs Regulator in low-power mode and flash memory in Stop mode 101
Accuracy of the HSI oscillator ACCHSI -8 4.5 % TA = -40 to 105 °C 105
Accuracy of the HSI oscillator ACCHSI -4 4 % TA = -10 to 85 °C 105
HSI oscillator startup time tsu(HSI) 2.2 4 µs 105
LSI oscillator frequency fLSI 17 32 47 kHz 105
LSE current consumption IDD 1 µA 104
LSE oscillator transconductance (startup) Gm 2.8 µA/V Startup 104

CAD (KiCad official)

  • Symbol: STM32F407ZET7
  • Footprint: Package_QFP:LQFP-144_20x20mm_P0.5mm
  • 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
  • 3D model files: stm32f407zet7-etched.step / stm32f407zet7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f407zet7.step / stm32f407zet7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (206 pp, sha256 1f41b4fa49a99602, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF