← Commit history

Initial commit: component/stm32f407vet6

Ray ·75dbb183c6 ·
2 files changed +832
README.mdadded+136
@@ -0,0 +1,136 @@+# STM32F407VET6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32F407VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5V-tolerant fast I/O, floating input after reset; AF: TRACECLK/FSMC_A23/ETH_MII_TXD3/EVENTOUT. |+| 2 | PE3 | bidirectional | 5V-tolerant fast I/O, floating input after reset; AF: TRACED0/FSMC_A19/EVENTOUT. |+| 3 | PE4 | bidirectional | 5V-tolerant fast I/O, floating input after reset; AF: TRACED1/FSMC_A20/DCMI_D4/EVENTOUT. |+| 4 | PE5 | bidirectional | 5V-tolerant fast I/O, floating input after reset; AF: TRACED2/FSMC_A21/TIM9_CH1/DCMI_D6/EVENTOUT. |+| 5 | PE6 | bidirectional | 5V-tolerant fast I/O, floating input after reset; AF: TRACED3/FSMC_A22/TIM9_CH2/DCMI_D7/EVENTOUT. |+| 6 | VBAT | power_in | Battery voltage supply for RTC, 20x32-bit backup registers and (when present) backup SRAM when VDD is not present. |+| 7 | PC13 | bidirectional | 5V-tolerant I/O supplied through the power switch (limited to 3 mA sink, output speed <=2 MHz, max load 30 pF, not usable as current source); AF: EVENTOUT; additional functions RTC_OUT, RTC_TAMP1, RTC_TS. |+| 8 | PC14 | bidirectional | 5V-tolerant I/O supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); AF: EVENTOUT; additional function OSC32_IN (32.768 kHz oscillator input) when used as LSE. |+| 9 | PC15 | bidirectional | 5V-tolerant I/O supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); AF: EVENTOUT; additional function OSC32_OUT (32.768 kHz oscillator output) when used as LSE. |+| 10 | VSS | power_in | Digital ground supply pin. |+| 11 | VDD | power_in | Digital power supply pin, 1.8 V to 3.6 V. |+| 12 | PH0 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: EVENTOUT; additional function OSC_IN (4-26 MHz external crystal/resonator input). |+| 13 | PH1 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: EVENTOUT; additional function OSC_OUT (4-26 MHz external crystal/resonator output). |+| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor; active-low system reset input/output. |+| 15 | PC0 | bidirectional | 5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN10; AF: OTG_HS_ULPI_STP/EVENTOUT. |+| 16 | PC1 | bidirectional | 5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN11; AF: ETH_MDC/EVENTOUT. |+| 17 | PC2 | bidirectional | 5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN12; AF: SPI2_MISO/OTG_HS_ULPI_DIR/ETH_MII_TXD2/I2S2ext_SD/EVENTOUT. |+| 18 | PC3 | bidirectional | 5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN13; AF: SPI2_MOSI/I2S2_SD/OTG_HS_ULPI_NXT/ETH_MII_TX_CLK/EVENTOUT. |+| 19 | VDD | power_in | Digital power supply pin, 1.8 V to 3.6 V. |+| 20 | VSSA | power_in | Analog ground supply pin for ADC, DAC, reset block, RC oscillators and PLL. |+| 21 | VREF+ | power_in | Positive analog reference voltage for ADC/DAC, must be between minimum VREF+ and VDDA. |+| 22 | VDDA | power_in | Analog power supply pin for ADC, DAC, reset block, RC oscillators and PLL (1.8 V to 3.6 V). |+| 23 | PA0 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC123_IN0/WKUP (wakeup from standby); AF: USART2_CTS/UART4_TX/ETH_MII_CRS/TIM2_CH1_ETR/TIM5_CH1/TIM8_ETR/EVENTOUT. |+| 24 | PA1 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC123_IN1; AF: USART2_RTS/UART4_RX/ETH_RMII_REF_CLK/ETH_MII_RX_CLK/TIM5_CH2/TIM2_CH2/EVENTOUT. |+| 25 | PA2 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC123_IN2; AF: USART2_TX/TIM5_CH3/TIM9_CH1/TIM2_CH3/ETH_MDIO/EVENTOUT. |+| 26 | PA3 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC123_IN3; AF: USART2_RX/TIM5_CH4/TIM9_CH2/TIM2_CH4/OTG_HS_ULPI_D0/ETH_MII_COL/EVENTOUT. |+| 27 | VSS | power_in | Digital ground supply pin. |+| 28 | VDD | power_in | Digital power supply pin, 1.8 V to 3.6 V. |+| 29 | PA4 | bidirectional | 3.3V-tolerant I/O directly connected to ADC (TTa), floating input after reset; additional function ADC12_IN4/DAC_OUT1; AF: SPI1_NSS/SPI3_NSS/USART2_CK/DCMI_HSYNC/OTG_HS_SOF/I2S3_WS/EVENTOUT. |+| 30 | PA5 | bidirectional | 3.3V-tolerant I/O directly connected to ADC (TTa), floating input after reset; additional function ADC12_IN5/DAC_OUT2; AF: SPI1_SCK/OTG_HS_ULPI_CK/TIM2_CH1_ETR/TIM8_CH1N/EVENTOUT. |+| 31 | PA6 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC12_IN6; AF: SPI1_MISO/TIM8_BKIN/TIM13_CH1/DCMI_PIXCLK/TIM3_CH1/TIM1_BKIN/EVENTOUT. |+| 32 | PA7 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC12_IN7; AF: SPI1_MOSI/TIM8_CH1N/TIM14_CH1/TIM3_CH2/ETH_MII_RX_DV/TIM1_CH1N/ETH_RMII_CRS_DV/EVENTOUT. |+| 33 | PC4 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC12_IN14; AF: ETH_RMII_RX_D0/ETH_MII_RX_D0/EVENTOUT. |+| 34 | PC5 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC12_IN15; AF: ETH_RMII_RX_D1/ETH_MII_RX_D1/EVENTOUT. |+| 35 | PB0 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC12_IN8; AF: TIM3_CH3/TIM8_CH2N/OTG_HS_ULPI_D1/ETH_MII_RXD2/TIM1_CH2N/EVENTOUT. |+| 36 | PB1 | bidirectional | 5V-tolerant I/O, floating input after reset; additional function ADC12_IN9; AF: TIM3_CH4/TIM8_CH3N/OTG_HS_ULPI_D2/ETH_MII_RXD3/TIM1_CH3N/EVENTOUT. |+| 37 | PB2 | bidirectional | 5V-tolerant I/O also used as BOOT1 pin sampled at reset to select boot mode; AF: EVENTOUT. |+| 38 | PE7 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D4/TIM1_ETR/EVENTOUT. |+| 39 | PE8 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D5/TIM1_CH1N/EVENTOUT. |+| 40 | PE9 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D6/TIM1_CH1/EVENTOUT. |+| 41 | PE10 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D7/TIM1_CH2N/EVENTOUT. |+| 42 | PE11 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D8/TIM1_CH2/EVENTOUT. |+| 43 | PE12 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D9/TIM1_CH3N/EVENTOUT. |+| 44 | PE13 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D10/TIM1_CH3/EVENTOUT. |+| 45 | PE14 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D11/TIM1_CH4/EVENTOUT. |+| 46 | PE15 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D12/TIM1_BKIN/EVENTOUT. |+| 47 | PB10 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI2_SCK/I2S2_CK/I2C2_SCL/USART3_TX/OTG_HS_ULPI_D3/ETH_MII_RX_ER/TIM2_CH3/EVENTOUT. |+| 48 | PB11 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2C2_SDA/USART3_RX/OTG_HS_ULPI_D4/ETH_RMII_TX_EN/ETH_MII_TX_EN/TIM2_CH4/EVENTOUT. |+| 49 | VCAP_1 | power_out | Voltage regulator output for internal 1.2V core supply; requires external decoupling capacitor per VCAP operating conditions. |+| 50 | VDD | power_in | Digital power supply pin, 1.8 V to 3.6 V. |+| 51 | PB12 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI2_NSS/I2S2_WS/I2C2_SMBA/USART3_CK/TIM1_BKIN/CAN2_RX/OTG_HS_ULPI_D5/ETH_RMII_TXD0/ETH_MII_TXD0/OTG_HS_ID/EVENTOUT. |+| 52 | PB13 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI2_SCK/I2S2_CK/USART3_CTS/TIM1_CH1N/CAN2_TX/OTG_HS_ULPI_D6/ETH_RMII_TXD1/ETH_MII_TXD1/EVENTOUT; additional function OTG_HS_VBUS. |+| 53 | PB14 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI2_MISO/TIM1_CH2N/TIM12_CH1/OTG_HS_DM/USART3_RTS/TIM8_CH2N/I2S2ext_SD/EVENTOUT. |+| 54 | PB15 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI2_MOSI/I2S2_SD/TIM1_CH3N/TIM8_CH3N/TIM12_CH2/OTG_HS_DP/EVENTOUT; additional function RTC_REFIN. |+| 55 | PD8 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D13/USART3_TX/EVENTOUT. |+| 56 | PD9 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D14/USART3_RX/EVENTOUT. |+| 57 | PD10 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D15/USART3_CK/EVENTOUT. |+| 58 | PD11 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_CLE/FSMC_A16/USART3_CTS/EVENTOUT. |+| 59 | PD12 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_ALE/FSMC_A17/TIM4_CH1/USART3_RTS/EVENTOUT. |+| 60 | PD13 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_A18/TIM4_CH2/EVENTOUT. |+| 61 | PD14 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D0/TIM4_CH3/EVENTOUT. |+| 62 | PD15 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D1/TIM4_CH4/EVENTOUT. |+| 63 | PC6 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2S2_MCK/TIM8_CH1/SDIO_D6/USART6_TX/DCMI_D0/TIM3_CH1/EVENTOUT. |+| 64 | PC7 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2S3_MCK/TIM8_CH2/SDIO_D7/USART6_RX/DCMI_D1/TIM3_CH2/EVENTOUT. |+| 65 | PC8 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: TIM8_CH3/SDIO_D0/TIM3_CH3/USART6_CK/DCMI_D2/EVENTOUT. |+| 66 | PC9 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2S_CKIN/MCO2/TIM8_CH4/SDIO_D1/I2C3_SDA/DCMI_D3/TIM3_CH4/EVENTOUT. |+| 67 | PA8 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: MCO1/USART1_CK/TIM1_CH1/I2C3_SCL/OTG_FS_SOF/EVENTOUT. |+| 68 | PA9 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: USART1_TX/TIM1_CH2/I2C3_SMBA/DCMI_D0/EVENTOUT; additional function OTG_FS_VBUS. |+| 69 | PA10 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: USART1_RX/TIM1_CH3/OTG_FS_ID/DCMI_D1/EVENTOUT. |+| 70 | PA11 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: USART1_CTS/CAN1_RX/TIM1_CH4/OTG_FS_DM/EVENTOUT. |+| 71 | PA12 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: USART1_RTS/CAN1_TX/TIM1_ETR/OTG_FS_DP/EVENTOUT. |+| 72 | PA13 | bidirectional | 5V-tolerant I/O, JTMS-SWDIO after reset (JTAG/SW debug); AF: JTMS-SWDIO/EVENTOUT. |+| 73 | VCAP_2 | power_out | Voltage regulator output for internal 1.2V core supply; requires external decoupling capacitor per VCAP operating conditions. |+| 74 | VSS | power_in | Digital ground supply pin. |+| 75 | VDD | power_in | Digital power supply pin, 1.8 V to 3.6 V. |+| 76 | PA14 | bidirectional | 5V-tolerant I/O, JTCK-SWCLK after reset (JTAG/SW debug clock); AF: JTCK-SWCLK/EVENTOUT. |+| 77 | PA15 | bidirectional | 5V-tolerant I/O, JTDI after reset; AF: JTDI/SPI3_NSS/I2S3_WS/TIM2_CH1_ETR/SPI1_NSS/EVENTOUT. |+| 78 | PC10 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI3_SCK/I2S3_CK/UART4_TX/SDIO_D2/DCMI_D8/USART3_TX/EVENTOUT. |+| 79 | PC11 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: UART4_RX/SPI3_MISO/SDIO_D3/DCMI_D4/USART3_RX/I2S3ext_SD/EVENTOUT. |+| 80 | PC12 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: UART5_TX/SDIO_CK/DCMI_D9/SPI3_MOSI/I2S3_SD/USART3_CK/EVENTOUT. |+| 81 | PD0 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D2/CAN1_RX/EVENTOUT. |+| 82 | PD1 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_D3/CAN1_TX/EVENTOUT. |+| 83 | PD2 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: TIM3_ETR/UART5_RX/SDIO_CMD/DCMI_D11/EVENTOUT. |+| 84 | PD3 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_CLK/USART2_CTS/EVENTOUT. |+| 85 | PD4 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_NOE/USART2_RTS/EVENTOUT. |+| 86 | PD5 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_NWE/USART2_TX/EVENTOUT. |+| 87 | PD6 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_NWAIT/USART2_RX/EVENTOUT. |+| 88 | PD7 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: USART2_CK/FSMC_NE1/FSMC_NCE2/EVENTOUT. |+| 89 | PB3 | bidirectional | 5V-tolerant I/O, JTDO/TRACESWO after reset; AF: JTDO/TRACESWO/SPI3_SCK/I2S3_CK/TIM2_CH2/SPI1_SCK/EVENTOUT. |+| 90 | PB4 | bidirectional | 5V-tolerant I/O, NJTRST after reset; AF: NJTRST/SPI3_MISO/TIM3_CH1/SPI1_MISO/I2S3ext_SD/EVENTOUT. |+| 91 | PB5 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2C1_SMBA/CAN2_RX/OTG_HS_ULPI_D7/ETH_PPS_OUT/TIM3_CH2/SPI1_MOSI/SPI3_MOSI/DCMI_D10/I2S3_SD/EVENTOUT. |+| 92 | PB6 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2C1_SCL/TIM4_CH1/CAN2_TX/DCMI_D5/USART1_TX/EVENTOUT. |+| 93 | PB7 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: I2C1_SDA/FSMC_NL/DCMI_VSYNC/USART1_RX/TIM4_CH2/EVENTOUT. |+| 94 | BOOT0 | input | Dedicated boot mode select pin sampled at reset to choose boot from Flash, system memory or SRAM; additional function VPP. |+| 95 | PB8 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: TIM4_CH3/SDIO_D4/TIM10_CH1/DCMI_D6/ETH_MII_TXD3/I2C1_SCL/CAN1_RX/EVENTOUT. |+| 96 | PB9 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: SPI2_NSS/I2S2_WS/TIM4_CH4/TIM11_CH1/SDIO_D5/DCMI_D7/I2C1_SDA/CAN1_TX/EVENTOUT. |+| 97 | PE0 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: TIM4_ETR/FSMC_NBL0/DCMI_D2/EVENTOUT. |+| 98 | PE1 | bidirectional | 5V-tolerant I/O, floating input after reset; AF: FSMC_NBL1/DCMI_D3/EVENTOUT. |+| 99 | VSS | power_in | Digital ground supply pin. |+| 100 | VDD | power_in | Digital power supply pin, 1.8 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F407VET6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32f407vet6-etched.step` / `stm32f407vet6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f407vet6.step` / `stm32f407vet6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579707984152215552) (185 pp, sha256 `f83f1f3dca0b4e10`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f407vet6-datasheet.pdf)
page.jsonadded+696
@@ -0,0 +1,696 @@+{+  "slug": "stm32f407vet6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f407vet6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f407vet6.kicad_sym",+    "stm32f407vet6.kicad_mod",+    "stm32f407vet6.glb",+    "stm32f407vet6.step",+    "stm32f407vet6.lbr",+    "docs/hero.png",+    "docs/stm32f407vet6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F407VET6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-100(14x14)",+    "pin_count": 100,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579707984152215552",+    "parts": {+      "symbol": "stm32f407vet6.kicad_sym",+      "footprint": "stm32f407vet6.kicad_mod",+      "model_3d": "stm32f407vet6-etched.glb",+      "model_3d_plain": "stm32f407vet6.glb",+      "model_3d_step": "stm32f407vet6-etched.step",+      "model_3d_step_plain": "stm32f407vet6.step",+      "lbr": "stm32f407vet6.lbr"+    },+    "distributor_links": {+      "lcsc": "C28730"+    },+    "pins": [+      {+        "number": "1",+        "name": "PE2",+        "type": "bidirectional",+        "description": "5V-tolerant fast I/O, floating input after reset; AF: TRACECLK/FSMC_A23/ETH_MII_TXD3/EVENTOUT."+      },+      {+        "number": "2",+        "name": "PE3",+        "type": "bidirectional",+        "description": "5V-tolerant fast I/O, floating input after reset; AF: TRACED0/FSMC_A19/EVENTOUT."+      },+      {+        "number": "3",+        "name": "PE4",+        "type": "bidirectional",+        "description": "5V-tolerant fast I/O, floating input after reset; AF: TRACED1/FSMC_A20/DCMI_D4/EVENTOUT."+      },+      {+        "number": "4",+        "name": "PE5",+        "type": "bidirectional",+        "description": "5V-tolerant fast I/O, floating input after reset; AF: TRACED2/FSMC_A21/TIM9_CH1/DCMI_D6/EVENTOUT."+      },+      {+        "number": "5",+        "name": "PE6",+        "type": "bidirectional",+        "description": "5V-tolerant fast I/O, floating input after reset; AF: TRACED3/FSMC_A22/TIM9_CH2/DCMI_D7/EVENTOUT."+      },+      {+        "number": "6",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery voltage supply for RTC, 20x32-bit backup registers and (when present) backup SRAM when VDD is not present."+      },+      {+        "number": "7",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O supplied through the power switch (limited to 3 mA sink, output speed <=2 MHz, max load 30 pF, not usable as current source); AF: EVENTOUT; additional functions RTC_OUT, RTC_TAMP1, RTC_TS."+      },+      {+        "number": "8",+        "name": "PC14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); AF: EVENTOUT; additional function OSC32_IN (32.768 kHz oscillator input) when used as LSE."+      },+      {+        "number": "9",+        "name": "PC15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O supplied through the power switch (same 3 mA/2 MHz/30 pF limits as PC13); AF: EVENTOUT; additional function OSC32_OUT (32.768 kHz oscillator output) when used as LSE."+      },+      {+        "number": "10",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "11",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 1.8 V to 3.6 V."+      },+      {+        "number": "12",+        "name": "PH0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: EVENTOUT; additional function OSC_IN (4-26 MHz external crystal/resonator input)."+      },+      {+        "number": "13",+        "name": "PH1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: EVENTOUT; additional function OSC_OUT (4-26 MHz external crystal/resonator output)."+      },+      {+        "number": "14",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with embedded weak pull-up resistor; active-low system reset input/output."+      },+      {+        "number": "15",+        "name": "PC0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN10; AF: OTG_HS_ULPI_STP/EVENTOUT."+      },+      {+        "number": "16",+        "name": "PC1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN11; AF: ETH_MDC/EVENTOUT."+      },+      {+        "number": "17",+        "name": "PC2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN12; AF: SPI2_MISO/OTG_HS_ULPI_DIR/ETH_MII_TXD2/I2S2ext_SD/EVENTOUT."+      },+      {+        "number": "18",+        "name": "PC3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O (analog mode 3.3V tolerant), floating input after reset; additional function ADC123_IN13; AF: SPI2_MOSI/I2S2_SD/OTG_HS_ULPI_NXT/ETH_MII_TX_CLK/EVENTOUT."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 1.8 V to 3.6 V."+      },+      {+        "number": "20",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply pin for ADC, DAC, reset block, RC oscillators and PLL."+      },+      {+        "number": "21",+        "name": "VREF+",+        "type": "power_in",+        "description": "Positive analog reference voltage for ADC/DAC, must be between minimum VREF+ and VDDA."+      },+      {+        "number": "22",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin for ADC, DAC, reset block, RC oscillators and PLL (1.8 V to 3.6 V)."+      },+      {+        "number": "23",+        "name": "PA0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC123_IN0/WKUP (wakeup from standby); AF: USART2_CTS/UART4_TX/ETH_MII_CRS/TIM2_CH1_ETR/TIM5_CH1/TIM8_ETR/EVENTOUT."+      },+      {+        "number": "24",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC123_IN1; AF: USART2_RTS/UART4_RX/ETH_RMII_REF_CLK/ETH_MII_RX_CLK/TIM5_CH2/TIM2_CH2/EVENTOUT."+      },+      {+        "number": "25",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC123_IN2; AF: USART2_TX/TIM5_CH3/TIM9_CH1/TIM2_CH3/ETH_MDIO/EVENTOUT."+      },+      {+        "number": "26",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC123_IN3; AF: USART2_RX/TIM5_CH4/TIM9_CH2/TIM2_CH4/OTG_HS_ULPI_D0/ETH_MII_COL/EVENTOUT."+      },+      {+        "number": "27",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "28",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 1.8 V to 3.6 V."+      },+      {+        "number": "29",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O directly connected to ADC (TTa), floating input after reset; additional function ADC12_IN4/DAC_OUT1; AF: SPI1_NSS/SPI3_NSS/USART2_CK/DCMI_HSYNC/OTG_HS_SOF/I2S3_WS/EVENTOUT."+      },+      {+        "number": "30",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O directly connected to ADC (TTa), floating input after reset; additional function ADC12_IN5/DAC_OUT2; AF: SPI1_SCK/OTG_HS_ULPI_CK/TIM2_CH1_ETR/TIM8_CH1N/EVENTOUT."+      },+      {+        "number": "31",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC12_IN6; AF: SPI1_MISO/TIM8_BKIN/TIM13_CH1/DCMI_PIXCLK/TIM3_CH1/TIM1_BKIN/EVENTOUT."+      },+      {+        "number": "32",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC12_IN7; AF: SPI1_MOSI/TIM8_CH1N/TIM14_CH1/TIM3_CH2/ETH_MII_RX_DV/TIM1_CH1N/ETH_RMII_CRS_DV/EVENTOUT."+      },+      {+        "number": "33",+        "name": "PC4",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC12_IN14; AF: ETH_RMII_RX_D0/ETH_MII_RX_D0/EVENTOUT."+      },+      {+        "number": "34",+        "name": "PC5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC12_IN15; AF: ETH_RMII_RX_D1/ETH_MII_RX_D1/EVENTOUT."+      },+      {+        "number": "35",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC12_IN8; AF: TIM3_CH3/TIM8_CH2N/OTG_HS_ULPI_D1/ETH_MII_RXD2/TIM1_CH2N/EVENTOUT."+      },+      {+        "number": "36",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; additional function ADC12_IN9; AF: TIM3_CH4/TIM8_CH3N/OTG_HS_ULPI_D2/ETH_MII_RXD3/TIM1_CH3N/EVENTOUT."+      },+      {+        "number": "37",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O also used as BOOT1 pin sampled at reset to select boot mode; AF: EVENTOUT."+      },+      {+        "number": "38",+        "name": "PE7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D4/TIM1_ETR/EVENTOUT."+      },+      {+        "number": "39",+        "name": "PE8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D5/TIM1_CH1N/EVENTOUT."+      },+      {+        "number": "40",+        "name": "PE9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D6/TIM1_CH1/EVENTOUT."+      },+      {+        "number": "41",+        "name": "PE10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D7/TIM1_CH2N/EVENTOUT."+      },+      {+        "number": "42",+        "name": "PE11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D8/TIM1_CH2/EVENTOUT."+      },+      {+        "number": "43",+        "name": "PE12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D9/TIM1_CH3N/EVENTOUT."+      },+      {+        "number": "44",+        "name": "PE13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D10/TIM1_CH3/EVENTOUT."+      },+      {+        "number": "45",+        "name": "PE14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D11/TIM1_CH4/EVENTOUT."+      },+      {+        "number": "46",+        "name": "PE15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D12/TIM1_BKIN/EVENTOUT."+      },+      {+        "number": "47",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI2_SCK/I2S2_CK/I2C2_SCL/USART3_TX/OTG_HS_ULPI_D3/ETH_MII_RX_ER/TIM2_CH3/EVENTOUT."+      },+      {+        "number": "48",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2C2_SDA/USART3_RX/OTG_HS_ULPI_D4/ETH_RMII_TX_EN/ETH_MII_TX_EN/TIM2_CH4/EVENTOUT."+      },+      {+        "number": "49",+        "name": "VCAP_1",+        "type": "power_out",+        "description": "Voltage regulator output for internal 1.2V core supply; requires external decoupling capacitor per VCAP operating conditions."+      },+      {+        "number": "50",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 1.8 V to 3.6 V."+      },+      {+        "number": "51",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI2_NSS/I2S2_WS/I2C2_SMBA/USART3_CK/TIM1_BKIN/CAN2_RX/OTG_HS_ULPI_D5/ETH_RMII_TXD0/ETH_MII_TXD0/OTG_HS_ID/EVENTOUT."+      },+      {+        "number": "52",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI2_SCK/I2S2_CK/USART3_CTS/TIM1_CH1N/CAN2_TX/OTG_HS_ULPI_D6/ETH_RMII_TXD1/ETH_MII_TXD1/EVENTOUT; additional function OTG_HS_VBUS."+      },+      {+        "number": "53",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI2_MISO/TIM1_CH2N/TIM12_CH1/OTG_HS_DM/USART3_RTS/TIM8_CH2N/I2S2ext_SD/EVENTOUT."+      },+      {+        "number": "54",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI2_MOSI/I2S2_SD/TIM1_CH3N/TIM8_CH3N/TIM12_CH2/OTG_HS_DP/EVENTOUT; additional function RTC_REFIN."+      },+      {+        "number": "55",+        "name": "PD8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D13/USART3_TX/EVENTOUT."+      },+      {+        "number": "56",+        "name": "PD9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D14/USART3_RX/EVENTOUT."+      },+      {+        "number": "57",+        "name": "PD10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D15/USART3_CK/EVENTOUT."+      },+      {+        "number": "58",+        "name": "PD11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_CLE/FSMC_A16/USART3_CTS/EVENTOUT."+      },+      {+        "number": "59",+        "name": "PD12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_ALE/FSMC_A17/TIM4_CH1/USART3_RTS/EVENTOUT."+      },+      {+        "number": "60",+        "name": "PD13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_A18/TIM4_CH2/EVENTOUT."+      },+      {+        "number": "61",+        "name": "PD14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D0/TIM4_CH3/EVENTOUT."+      },+      {+        "number": "62",+        "name": "PD15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D1/TIM4_CH4/EVENTOUT."+      },+      {+        "number": "63",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2S2_MCK/TIM8_CH1/SDIO_D6/USART6_TX/DCMI_D0/TIM3_CH1/EVENTOUT."+      },+      {+        "number": "64",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2S3_MCK/TIM8_CH2/SDIO_D7/USART6_RX/DCMI_D1/TIM3_CH2/EVENTOUT."+      },+      {+        "number": "65",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: TIM8_CH3/SDIO_D0/TIM3_CH3/USART6_CK/DCMI_D2/EVENTOUT."+      },+      {+        "number": "66",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2S_CKIN/MCO2/TIM8_CH4/SDIO_D1/I2C3_SDA/DCMI_D3/TIM3_CH4/EVENTOUT."+      },+      {+        "number": "67",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: MCO1/USART1_CK/TIM1_CH1/I2C3_SCL/OTG_FS_SOF/EVENTOUT."+      },+      {+        "number": "68",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: USART1_TX/TIM1_CH2/I2C3_SMBA/DCMI_D0/EVENTOUT; additional function OTG_FS_VBUS."+      },+      {+        "number": "69",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: USART1_RX/TIM1_CH3/OTG_FS_ID/DCMI_D1/EVENTOUT."+      },+      {+        "number": "70",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: USART1_CTS/CAN1_RX/TIM1_CH4/OTG_FS_DM/EVENTOUT."+      },+      {+        "number": "71",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: USART1_RTS/CAN1_TX/TIM1_ETR/OTG_FS_DP/EVENTOUT."+      },+      {+        "number": "72",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, JTMS-SWDIO after reset (JTAG/SW debug); AF: JTMS-SWDIO/EVENTOUT."+      },+      {+        "number": "73",+        "name": "VCAP_2",+        "type": "power_out",+        "description": "Voltage regulator output for internal 1.2V core supply; requires external decoupling capacitor per VCAP operating conditions."+      },+      {+        "number": "74",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "75",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 1.8 V to 3.6 V."+      },+      {+        "number": "76",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, JTCK-SWCLK after reset (JTAG/SW debug clock); AF: JTCK-SWCLK/EVENTOUT."+      },+      {+        "number": "77",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, JTDI after reset; AF: JTDI/SPI3_NSS/I2S3_WS/TIM2_CH1_ETR/SPI1_NSS/EVENTOUT."+      },+      {+        "number": "78",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI3_SCK/I2S3_CK/UART4_TX/SDIO_D2/DCMI_D8/USART3_TX/EVENTOUT."+      },+      {+        "number": "79",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: UART4_RX/SPI3_MISO/SDIO_D3/DCMI_D4/USART3_RX/I2S3ext_SD/EVENTOUT."+      },+      {+        "number": "80",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: UART5_TX/SDIO_CK/DCMI_D9/SPI3_MOSI/I2S3_SD/USART3_CK/EVENTOUT."+      },+      {+        "number": "81",+        "name": "PD0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D2/CAN1_RX/EVENTOUT."+      },+      {+        "number": "82",+        "name": "PD1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_D3/CAN1_TX/EVENTOUT."+      },+      {+        "number": "83",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: TIM3_ETR/UART5_RX/SDIO_CMD/DCMI_D11/EVENTOUT."+      },+      {+        "number": "84",+        "name": "PD3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_CLK/USART2_CTS/EVENTOUT."+      },+      {+        "number": "85",+        "name": "PD4",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_NOE/USART2_RTS/EVENTOUT."+      },+      {+        "number": "86",+        "name": "PD5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_NWE/USART2_TX/EVENTOUT."+      },+      {+        "number": "87",+        "name": "PD6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_NWAIT/USART2_RX/EVENTOUT."+      },+      {+        "number": "88",+        "name": "PD7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: USART2_CK/FSMC_NE1/FSMC_NCE2/EVENTOUT."+      },+      {+        "number": "89",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, JTDO/TRACESWO after reset; AF: JTDO/TRACESWO/SPI3_SCK/I2S3_CK/TIM2_CH2/SPI1_SCK/EVENTOUT."+      },+      {+        "number": "90",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, NJTRST after reset; AF: NJTRST/SPI3_MISO/TIM3_CH1/SPI1_MISO/I2S3ext_SD/EVENTOUT."+      },+      {+        "number": "91",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2C1_SMBA/CAN2_RX/OTG_HS_ULPI_D7/ETH_PPS_OUT/TIM3_CH2/SPI1_MOSI/SPI3_MOSI/DCMI_D10/I2S3_SD/EVENTOUT."+      },+      {+        "number": "92",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2C1_SCL/TIM4_CH1/CAN2_TX/DCMI_D5/USART1_TX/EVENTOUT."+      },+      {+        "number": "93",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: I2C1_SDA/FSMC_NL/DCMI_VSYNC/USART1_RX/TIM4_CH2/EVENTOUT."+      },+      {+        "number": "94",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot mode select pin sampled at reset to choose boot from Flash, system memory or SRAM; additional function VPP."+      },+      {+        "number": "95",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: TIM4_CH3/SDIO_D4/TIM10_CH1/DCMI_D6/ETH_MII_TXD3/I2C1_SCL/CAN1_RX/EVENTOUT."+      },+      {+        "number": "96",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: SPI2_NSS/I2S2_WS/TIM4_CH4/TIM11_CH1/SDIO_D5/DCMI_D7/I2C1_SDA/CAN1_TX/EVENTOUT."+      },+      {+        "number": "97",+        "name": "PE0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: TIM4_ETR/FSMC_NBL0/DCMI_D2/EVENTOUT."+      },+      {+        "number": "98",+        "name": "PE1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O, floating input after reset; AF: FSMC_NBL1/DCMI_D3/EVENTOUT."+      },+      {+        "number": "99",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "100",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 1.8 V to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: VCAP_1 and VCAP_2 pins are classified as passive (capacitor connection pins) rather than power pins,; Several pins appear in the datasheet with secondary names (like PA0/WKUP, PC14/OSC32_IN, BOOT0 input",+          "49/100 pins cited to the wrong page (name found elsewhere): ['48:PB12@p45', '49:PA3@p45', '50:VSS@p45', '51:VDD@p45']"+        ],+        "pages_sent": 55,+        "cost_usd": 1.1883,+        "at": "2026-09-23T06:47:00"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579707984152215552",+        "pages": 185,+        "sha256": "f83f1f3dca0b4e10",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 100,+        "described": 100,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file