← Commit history

Initial commit: component/stm32f401vct6

Ray ·8710abe50d ·
2 files changed +832
README.mdadded+136
@@ -0,0 +1,136 @@+# STM32F401VCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32F401VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | GPIO port E pin 2 with alternate functions including SPI4 clock, Trace clock, and event output. |+| 2 | PE3 | bidirectional | GPIO port E pin 3 with alternate functions including Trace data 0 and event output. |+| 3 | PE4 | bidirectional | GPIO port E pin 4 with alternate functions including SPI4 chip select, Trace data 1, and event output. |+| 4 | PE5 | bidirectional | GPIO port E pin 5 with alternate functions including SPI4 MISO, TIM9 channel 1, Trace data 2, and event output. |+| 5 | PE6 | bidirectional | GPIO port E pin 6 with alternate functions including SPI4 MOSI, TIM9 channel 2, Trace data 3, and event output. |+| 6 | VBAT | power_in | Backup domain power supply pin accepting 1.65 to 3.6 V for RTC and backup registers. |+| 7 | PC13 | bidirectional | GPIO port C pin 13 with 3 mA maximum output current and alternate functions for RTC tamper detection, RTC output, and RTC timestamp. |+| 8 | PC14-OSC32_IN | bidirectional | GPIO port C pin 14 serving as 32 kHz oscillator input with 2 mA maximum output current and event output function. |+| 9 | PC15-OSC32_OUT | bidirectional | GPIO port C pin 15 serving as 32 kHz oscillator output with 2 mA maximum output current and event output function. |+| 10 | VSS | power_in | Ground return path for main power supply. |+| 11 | VDD | power_in | Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic. |+| 12 | PH0-OSC_IN | bidirectional | GPIO port H pin 0 serving as main oscillator input with event output function. |+| 13 | PH1-OSC_OUT | bidirectional | GPIO port H pin 1 serving as main oscillator output with event output function. |+| 14 | NRST | bidirectional | Active-low reset input pin with embedded weak pull-up resistor, glitch filter, and event output function. |+| 15 | PC0 | bidirectional | GPIO port C pin 0 serving as ADC channel 10 input with event output function. |+| 16 | PC1 | bidirectional | GPIO port C pin 1 serving as ADC channel 11 input with event output function. |+| 17 | PC2 | bidirectional | GPIO port C pin 2 with alternate functions including SPI2 MISO, I2S2 extension SD, ADC channel 12, and event output. |+| 18 | PC3 | bidirectional | GPIO port C pin 3 with alternate functions including SPI2/I2S2 MOSI, ADC channel 13, and event output. |+| 19 | VDD | power_in | Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic. |+| 20 | VSSA/VREF- | power_in | Analog ground return path and negative ADC reference voltage pin. |+| 21 | VREF+ | power_in | Positive ADC reference voltage pin accepting 1.7 to 3.6 V. |+| 22 | VDDA | power_in | Analog power supply pin accepting 1.7 to 3.6 V for ADC, PLL, and internal oscillators. |+| 23 | PA0 | bidirectional | GPIO port A pin 0 serving as ADC channel 0 and wakeup source from Standby mode, with alternate functions for USART2, TIM2/5, and event output. |+| 24 | PA1 | bidirectional | GPIO port A pin 1 with alternate functions including USART2 RTS, TIM2/5 channels, and event output, with ADC channel 1 input. |+| 25 | PA2 | bidirectional | GPIO port A pin 2 with alternate functions including USART2 TX, TIM2/5/9 channels, and event output, with ADC channel 2 input. |+| 26 | PA3 | bidirectional | GPIO port A pin 3 with alternate functions including USART2 RX, TIM2/5/9 channels, and event output, with ADC channel 3 input. |+| 27 | VSS | power_in | Ground return path for main power supply. |+| 28 | VDD | power_in | Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic. |+| 29 | PA4 | bidirectional | GPIO port A pin 4 with alternate functions including SPI1/3 chip select, USART2 clock, and event output, with ADC channel 4 input. |+| 30 | PA5 | bidirectional | GPIO port A pin 5 with alternate functions including SPI1 clock and TIM2 channel 1, with ADC channel 5 input. |+| 31 | PA6 | bidirectional | GPIO port A pin 6 with alternate functions including SPI1 MISO, TIM1 break input, and TIM3 channel 1, with ADC channel 6 input. |+| 32 | PA7 | bidirectional | GPIO port A pin 7 with alternate functions including SPI1 MOSI, TIM1 channel 1N, and TIM3 channel 2, with ADC channel 7 input. |+| 33 | PC4 | bidirectional | GPIO port C pin 4 with event output function serving as ADC channel 14 input. |+| 34 | PC5 | bidirectional | GPIO port C pin 5 with event output function serving as ADC channel 15 input. |+| 35 | PB0 | bidirectional | GPIO port B pin 0 with alternate functions including TIM1/3 channels and event output, with ADC channel 8 input. |+| 36 | PB1 | bidirectional | GPIO port B pin 1 with alternate functions including TIM1/3 channels and event output, with ADC channel 9 input. |+| 37 | PB2 | bidirectional | GPIO port B pin 2 with event output function and boot mode selection as BOOT1. |+| 38 | PE7 | bidirectional | GPIO port E pin 7 with alternate functions including TIM1 external trigger and event output. |+| 39 | PE8 | bidirectional | GPIO port E pin 8 with alternate functions including TIM1 channel 1N and event output. |+| 40 | PE9 | bidirectional | GPIO port E pin 9 with alternate functions including TIM1 channel 1 and event output. |+| 41 | PE10 | bidirectional | GPIO port E pin 10 with alternate functions including TIM1 channel 2N and event output. |+| 42 | PE11 | bidirectional | GPIO port E pin 11 with alternate functions including SPI4 chip select, TIM1 channel 2, and event output. |+| 43 | PE12 | bidirectional | GPIO port E pin 12 with alternate functions including SPI4 clock, TIM1 channel 3N, and event output. |+| 44 | PE13 | bidirectional | GPIO port E pin 13 with alternate functions including SPI4 MISO, TIM1 channel 3, and event output. |+| 45 | PE14 | bidirectional | GPIO port E pin 14 with alternate functions including SPI4 MOSI, TIM1 channel 4, and event output. |+| 46 | PE15 | bidirectional | GPIO port E pin 15 with alternate functions including TIM1 break input and event output. |+| 47 | PB10 | bidirectional | GPIO port B pin 10 with alternate functions including SPI2/I2S2 clock, I2C2 SCL, and TIM2 channel 3. |+| 48 | VCAP_1 | passive | Voltage regulator output capacitor connection pin requiring external 2.2 µF ceramic capacitor for power supply stabilization. |+| 49 | VSS | power_in | Ground return path for main power supply. |+| 50 | VDD | power_in | Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic. |+| 51 | PB12 | bidirectional | GPIO port B pin 12 with alternate functions including SPI2/I2S2 chip select, I2C2 SMB alert, and TIM1 break input. |+| 52 | PB13 | bidirectional | GPIO port B pin 13 with alternate functions including SPI2/I2S2 clock and TIM1 channel 1N. |+| 53 | PB14 | bidirectional | GPIO port B pin 14 with alternate functions including SPI2 MISO, I2S2 extension SD, and TIM1 channel 2N. |+| 54 | PB15 | bidirectional | GPIO port B pin 15 with alternate functions including SPI2/I2S2 MOSI and TIM1 channel 3N, with RTC reference input. |+| 55 | PD8 | bidirectional | GPIO port D pin 8 with event output function. |+| 56 | PD9 | bidirectional | GPIO port D pin 9 with event output function. |+| 57 | PD10 | bidirectional | GPIO port D pin 10 with event output function. |+| 58 | PD11 | bidirectional | GPIO port D pin 11 with event output function. |+| 59 | PD12 | bidirectional | GPIO port D pin 12 with alternate functions including TIM4 channel 1 and event output. |+| 60 | PD13 | bidirectional | GPIO port D pin 13 with alternate functions including TIM4 channel 2 and event output. |+| 61 | PD14 | bidirectional | GPIO port D pin 14 with alternate functions including TIM4 channel 3 and event output. |+| 62 | PD15 | bidirectional | GPIO port D pin 15 with alternate functions including TIM4 channel 4 and event output. |+| 63 | PC6 | bidirectional | GPIO port C pin 6 with alternate functions including I2S2 master clock, USART6 TX, TIM3 channel 1, and SDIO data 6. |+| 64 | PC7 | bidirectional | GPIO port C pin 7 with alternate functions including I2S3 master clock, USART6 RX, TIM3 channel 2, and SDIO data 7. |+| 65 | PC8 | bidirectional | GPIO port C pin 8 with alternate functions including USART6 clock, TIM3 channel 3, and SDIO data 0. |+| 66 | PC9 | bidirectional | GPIO port C pin 9 with alternate functions including I2S clock input, I2C3 SDA, TIM3 channel 4, SDIO data 1, and MCO2 output. |+| 67 | PA8 | bidirectional | GPIO port A pin 8 with alternate functions including I2C3 SCL, USART1 clock, TIM1 channel 1, USB OTG frame output, and MCO1 clock output. |+| 68 | PA9 | bidirectional | GPIO port A pin 9 with alternate functions including I2C3 SMB alert, USART1 TX, TIM1 channel 2, and USB OTG VBUS sensing. |+| 69 | PA10 | bidirectional | GPIO port A pin 10 with alternate functions including USART1 RX, TIM1 channel 3, and USB OTG ID pin. |+| 70 | PA11 | bidirectional | GPIO port A pin 11 with alternate functions including USART1 CTS, USART6 TX, TIM1 channel 4, and USB OTG D- data line. |+| 71 | PA12 | bidirectional | GPIO port A pin 12 with alternate functions including USART1 RTS, USART6 RX, TIM1 external trigger, and USB OTG D+ data line. |+| 72 | PA13 | bidirectional | GPIO port A pin 13 serving as JTAG TMS and serial wire debug I/O with event output function. |+| 73 | VCAP_2 | passive | Voltage regulator output capacitor connection pin (LQFP100 package only) requiring external 2.2 µF ceramic capacitor for power supply stabilization. |+| 74 | VSS | power_in | Ground return path for main power supply. |+| 75 | VDD | power_in | Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic. |+| 76 | PA14 | bidirectional | GPIO port A pin 14 serving as JTAG TCK and serial wire debug clock with event output function. |+| 77 | PA15 | bidirectional | GPIO port A pin 15 serving as JTAG TDI with alternate functions including SPI1/3 chip select, I2S3 word select, TIM2 channel 1, and event output. |+| 78 | PC10 | bidirectional | GPIO port C pin 10 with alternate functions including SPI3/I2S3 clock and SDIO data 2. |+| 79 | PC11 | bidirectional | GPIO port C pin 11 with alternate functions including I2S3 extension SD, SPI3 MISO, and SDIO data 3. |+| 80 | PC12 | bidirectional | GPIO port C pin 12 with alternate functions including SPI3/I2S3 MOSI and SDIO clock. |+| 81 | PD0 | bidirectional | GPIO port D pin 0 with event output function. |+| 82 | PD1 | bidirectional | GPIO port D pin 1 with event output function. |+| 83 | PD2 | bidirectional | GPIO port D pin 2 with alternate functions including TIM3 external trigger and SDIO command line. |+| 84 | PD3 | bidirectional | GPIO port D pin 3 with alternate functions including SPI2/I2S2 clock and USART2 CTS. |+| 85 | PD4 | bidirectional | GPIO port D pin 4 with alternate functions including USART2 RTS. |+| 86 | PD5 | bidirectional | GPIO port D pin 5 with alternate functions including USART2 TX. |+| 87 | PD6 | bidirectional | GPIO port D pin 6 with alternate functions including SPI3/I2S3 MOSI and USART2 RX. |+| 88 | PD7 | bidirectional | GPIO port D pin 7 with alternate functions including USART2 clock. |+| 89 | PB3 | bidirectional | GPIO port B pin 3 serving as JTAG TDO and serial wire debug output with alternate functions for SPI1/3 clock, I2C2 SDA, TIM2 channel 2, and event output. |+| 90 | PB4 | bidirectional | GPIO port B pin 4 serving as JTAG TRST with alternate functions including SPI1 MISO, SPI3 MISO, I2S3 extension SD, I2C3 SDA, TIM3 channel 1, and event output. |+| 91 | PB5 | bidirectional | GPIO port B pin 5 with alternate functions including SPI1 MOSI, SPI3/I2S3 MOSI, I2C1 SMB alert, TIM3 channel 2, and event output. |+| 92 | PB6 | bidirectional | GPIO port B pin 6 with alternate functions including I2C1 SCL, USART1 TX, TIM4 channel 1, and event output. |+| 93 | PB7 | bidirectional | GPIO port B pin 7 with alternate functions including I2C1 SDA, USART1 RX, TIM4 channel 2, and event output. |+| 94 | BOOT0 | input | Boot mode selection pin (0 = boot from Flash, 1 = boot from system memory) with 9 V absolute maximum input voltage. |+| 95 | PB8 | bidirectional | GPIO port B pin 8 with alternate functions including I2C1 SCL, TIM4 channel 3, TIM10 channel 1, and SDIO data 4. |+| 96 | PB9 | bidirectional | GPIO port B pin 9 with alternate functions including SPI2/I2S2 chip select, I2C1 SDA, TIM4 channel 4, TIM11 channel 1, and SDIO data 5. |+| 97 | PE0 | bidirectional | GPIO port E pin 0 with alternate functions including TIM4 external trigger and event output. |+| 98 | PE1 | bidirectional | GPIO port E pin 1 with alternate functions including TIM1 channel 2N and event output. |+| 99 | VSS | power_in | Ground return path for main power supply. |+| 100 | VDD | power_in | Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F401VCT6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32f401vct6-etched.step` / `stm32f401vct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f401vct6.step` / `stm32f401vct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918728519639040) (139 pp, sha256 `c38f92aa9d66e8cb`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f401vct6-datasheet.pdf)
page.jsonadded+696
@@ -0,0 +1,696 @@+{+  "slug": "stm32f401vct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f401vct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f401vct6.kicad_sym",+    "stm32f401vct6.kicad_mod",+    "stm32f401vct6.glb",+    "stm32f401vct6.step",+    "stm32f401vct6.lbr",+    "docs/hero.png",+    "docs/stm32f401vct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F401VCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-100(14x14)",+    "pin_count": 100,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918728519639040",+    "parts": {+      "symbol": "stm32f401vct6.kicad_sym",+      "footprint": "stm32f401vct6.kicad_mod",+      "model_3d": "stm32f401vct6-etched.glb",+      "model_3d_plain": "stm32f401vct6.glb",+      "model_3d_step": "stm32f401vct6-etched.step",+      "model_3d_step_plain": "stm32f401vct6.step",+      "lbr": "stm32f401vct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C967632"+    },+    "pins": [+      {+        "number": "1",+        "name": "PE2",+        "type": "bidirectional",+        "description": "GPIO port E pin 2 with alternate functions including SPI4 clock, Trace clock, and event output."+      },+      {+        "number": "2",+        "name": "PE3",+        "type": "bidirectional",+        "description": "GPIO port E pin 3 with alternate functions including Trace data 0 and event output."+      },+      {+        "number": "3",+        "name": "PE4",+        "type": "bidirectional",+        "description": "GPIO port E pin 4 with alternate functions including SPI4 chip select, Trace data 1, and event output."+      },+      {+        "number": "4",+        "name": "PE5",+        "type": "bidirectional",+        "description": "GPIO port E pin 5 with alternate functions including SPI4 MISO, TIM9 channel 1, Trace data 2, and event output."+      },+      {+        "number": "5",+        "name": "PE6",+        "type": "bidirectional",+        "description": "GPIO port E pin 6 with alternate functions including SPI4 MOSI, TIM9 channel 2, Trace data 3, and event output."+      },+      {+        "number": "6",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup domain power supply pin accepting 1.65 to 3.6 V for RTC and backup registers."+      },+      {+        "number": "7",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO port C pin 13 with 3 mA maximum output current and alternate functions for RTC tamper detection, RTC output, and RTC timestamp."+      },+      {+        "number": "8",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO port C pin 14 serving as 32 kHz oscillator input with 2 mA maximum output current and event output function."+      },+      {+        "number": "9",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO port C pin 15 serving as 32 kHz oscillator output with 2 mA maximum output current and event output function."+      },+      {+        "number": "10",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return path for main power supply."+      },+      {+        "number": "11",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic."+      },+      {+        "number": "12",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "GPIO port H pin 0 serving as main oscillator input with event output function."+      },+      {+        "number": "13",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "GPIO port H pin 1 serving as main oscillator output with event output function."+      },+      {+        "number": "14",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low reset input pin with embedded weak pull-up resistor, glitch filter, and event output function."+      },+      {+        "number": "15",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO port C pin 0 serving as ADC channel 10 input with event output function."+      },+      {+        "number": "16",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO port C pin 1 serving as ADC channel 11 input with event output function."+      },+      {+        "number": "17",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO port C pin 2 with alternate functions including SPI2 MISO, I2S2 extension SD, ADC channel 12, and event output."+      },+      {+        "number": "18",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO port C pin 3 with alternate functions including SPI2/I2S2 MOSI, ADC channel 13, and event output."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic."+      },+      {+        "number": "20",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground return path and negative ADC reference voltage pin."+      },+      {+        "number": "21",+        "name": "VREF+",+        "type": "power_in",+        "description": "Positive ADC reference voltage pin accepting 1.7 to 3.6 V."+      },+      {+        "number": "22",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin accepting 1.7 to 3.6 V for ADC, PLL, and internal oscillators."+      },+      {+        "number": "23",+        "name": "PA0",+        "type": "bidirectional",+        "description": "GPIO port A pin 0 serving as ADC channel 0 and wakeup source from Standby mode, with alternate functions for USART2, TIM2/5, and event output."+      },+      {+        "number": "24",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A pin 1 with alternate functions including USART2 RTS, TIM2/5 channels, and event output, with ADC channel 1 input."+      },+      {+        "number": "25",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A pin 2 with alternate functions including USART2 TX, TIM2/5/9 channels, and event output, with ADC channel 2 input."+      },+      {+        "number": "26",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A pin 3 with alternate functions including USART2 RX, TIM2/5/9 channels, and event output, with ADC channel 3 input."+      },+      {+        "number": "27",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return path for main power supply."+      },+      {+        "number": "28",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic."+      },+      {+        "number": "29",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A pin 4 with alternate functions including SPI1/3 chip select, USART2 clock, and event output, with ADC channel 4 input."+      },+      {+        "number": "30",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A pin 5 with alternate functions including SPI1 clock and TIM2 channel 1, with ADC channel 5 input."+      },+      {+        "number": "31",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A pin 6 with alternate functions including SPI1 MISO, TIM1 break input, and TIM3 channel 1, with ADC channel 6 input."+      },+      {+        "number": "32",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A pin 7 with alternate functions including SPI1 MOSI, TIM1 channel 1N, and TIM3 channel 2, with ADC channel 7 input."+      },+      {+        "number": "33",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO port C pin 4 with event output function serving as ADC channel 14 input."+      },+      {+        "number": "34",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO port C pin 5 with event output function serving as ADC channel 15 input."+      },+      {+        "number": "35",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B pin 0 with alternate functions including TIM1/3 channels and event output, with ADC channel 8 input."+      },+      {+        "number": "36",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B pin 1 with alternate functions including TIM1/3 channels and event output, with ADC channel 9 input."+      },+      {+        "number": "37",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO port B pin 2 with event output function and boot mode selection as BOOT1."+      },+      {+        "number": "38",+        "name": "PE7",+        "type": "bidirectional",+        "description": "GPIO port E pin 7 with alternate functions including TIM1 external trigger and event output."+      },+      {+        "number": "39",+        "name": "PE8",+        "type": "bidirectional",+        "description": "GPIO port E pin 8 with alternate functions including TIM1 channel 1N and event output."+      },+      {+        "number": "40",+        "name": "PE9",+        "type": "bidirectional",+        "description": "GPIO port E pin 9 with alternate functions including TIM1 channel 1 and event output."+      },+      {+        "number": "41",+        "name": "PE10",+        "type": "bidirectional",+        "description": "GPIO port E pin 10 with alternate functions including TIM1 channel 2N and event output."+      },+      {+        "number": "42",+        "name": "PE11",+        "type": "bidirectional",+        "description": "GPIO port E pin 11 with alternate functions including SPI4 chip select, TIM1 channel 2, and event output."+      },+      {+        "number": "43",+        "name": "PE12",+        "type": "bidirectional",+        "description": "GPIO port E pin 12 with alternate functions including SPI4 clock, TIM1 channel 3N, and event output."+      },+      {+        "number": "44",+        "name": "PE13",+        "type": "bidirectional",+        "description": "GPIO port E pin 13 with alternate functions including SPI4 MISO, TIM1 channel 3, and event output."+      },+      {+        "number": "45",+        "name": "PE14",+        "type": "bidirectional",+        "description": "GPIO port E pin 14 with alternate functions including SPI4 MOSI, TIM1 channel 4, and event output."+      },+      {+        "number": "46",+        "name": "PE15",+        "type": "bidirectional",+        "description": "GPIO port E pin 15 with alternate functions including TIM1 break input and event output."+      },+      {+        "number": "47",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO port B pin 10 with alternate functions including SPI2/I2S2 clock, I2C2 SCL, and TIM2 channel 3."+      },+      {+        "number": "48",+        "name": "VCAP_1",+        "type": "passive",+        "description": "Voltage regulator output capacitor connection pin requiring external 2.2 µF ceramic capacitor for power supply stabilization."+      },+      {+        "number": "49",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return path for main power supply."+      },+      {+        "number": "50",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic."+      },+      {+        "number": "51",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO port B pin 12 with alternate functions including SPI2/I2S2 chip select, I2C2 SMB alert, and TIM1 break input."+      },+      {+        "number": "52",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO port B pin 13 with alternate functions including SPI2/I2S2 clock and TIM1 channel 1N."+      },+      {+        "number": "53",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO port B pin 14 with alternate functions including SPI2 MISO, I2S2 extension SD, and TIM1 channel 2N."+      },+      {+        "number": "54",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO port B pin 15 with alternate functions including SPI2/I2S2 MOSI and TIM1 channel 3N, with RTC reference input."+      },+      {+        "number": "55",+        "name": "PD8",+        "type": "bidirectional",+        "description": "GPIO port D pin 8 with event output function."+      },+      {+        "number": "56",+        "name": "PD9",+        "type": "bidirectional",+        "description": "GPIO port D pin 9 with event output function."+      },+      {+        "number": "57",+        "name": "PD10",+        "type": "bidirectional",+        "description": "GPIO port D pin 10 with event output function."+      },+      {+        "number": "58",+        "name": "PD11",+        "type": "bidirectional",+        "description": "GPIO port D pin 11 with event output function."+      },+      {+        "number": "59",+        "name": "PD12",+        "type": "bidirectional",+        "description": "GPIO port D pin 12 with alternate functions including TIM4 channel 1 and event output."+      },+      {+        "number": "60",+        "name": "PD13",+        "type": "bidirectional",+        "description": "GPIO port D pin 13 with alternate functions including TIM4 channel 2 and event output."+      },+      {+        "number": "61",+        "name": "PD14",+        "type": "bidirectional",+        "description": "GPIO port D pin 14 with alternate functions including TIM4 channel 3 and event output."+      },+      {+        "number": "62",+        "name": "PD15",+        "type": "bidirectional",+        "description": "GPIO port D pin 15 with alternate functions including TIM4 channel 4 and event output."+      },+      {+        "number": "63",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO port C pin 6 with alternate functions including I2S2 master clock, USART6 TX, TIM3 channel 1, and SDIO data 6."+      },+      {+        "number": "64",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO port C pin 7 with alternate functions including I2S3 master clock, USART6 RX, TIM3 channel 2, and SDIO data 7."+      },+      {+        "number": "65",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO port C pin 8 with alternate functions including USART6 clock, TIM3 channel 3, and SDIO data 0."+      },+      {+        "number": "66",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO port C pin 9 with alternate functions including I2S clock input, I2C3 SDA, TIM3 channel 4, SDIO data 1, and MCO2 output."+      },+      {+        "number": "67",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO port A pin 8 with alternate functions including I2C3 SCL, USART1 clock, TIM1 channel 1, USB OTG frame output, and MCO1 clock output."+      },+      {+        "number": "68",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A pin 9 with alternate functions including I2C3 SMB alert, USART1 TX, TIM1 channel 2, and USB OTG VBUS sensing."+      },+      {+        "number": "69",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A pin 10 with alternate functions including USART1 RX, TIM1 channel 3, and USB OTG ID pin."+      },+      {+        "number": "70",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO port A pin 11 with alternate functions including USART1 CTS, USART6 TX, TIM1 channel 4, and USB OTG D- data line."+      },+      {+        "number": "71",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO port A pin 12 with alternate functions including USART1 RTS, USART6 RX, TIM1 external trigger, and USB OTG D+ data line."+      },+      {+        "number": "72",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO port A pin 13 serving as JTAG TMS and serial wire debug I/O with event output function."+      },+      {+        "number": "73",+        "name": "VCAP_2",+        "type": "passive",+        "description": "Voltage regulator output capacitor connection pin (LQFP100 package only) requiring external 2.2 µF ceramic capacitor for power supply stabilization."+      },+      {+        "number": "74",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return path for main power supply."+      },+      {+        "number": "75",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic."+      },+      {+        "number": "76",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO port A pin 14 serving as JTAG TCK and serial wire debug clock with event output function."+      },+      {+        "number": "77",+        "name": "PA15",+        "type": "bidirectional",+        "description": "GPIO port A pin 15 serving as JTAG TDI with alternate functions including SPI1/3 chip select, I2S3 word select, TIM2 channel 1, and event output."+      },+      {+        "number": "78",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO port C pin 10 with alternate functions including SPI3/I2S3 clock and SDIO data 2."+      },+      {+        "number": "79",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO port C pin 11 with alternate functions including I2S3 extension SD, SPI3 MISO, and SDIO data 3."+      },+      {+        "number": "80",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO port C pin 12 with alternate functions including SPI3/I2S3 MOSI and SDIO clock."+      },+      {+        "number": "81",+        "name": "PD0",+        "type": "bidirectional",+        "description": "GPIO port D pin 0 with event output function."+      },+      {+        "number": "82",+        "name": "PD1",+        "type": "bidirectional",+        "description": "GPIO port D pin 1 with event output function."+      },+      {+        "number": "83",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO port D pin 2 with alternate functions including TIM3 external trigger and SDIO command line."+      },+      {+        "number": "84",+        "name": "PD3",+        "type": "bidirectional",+        "description": "GPIO port D pin 3 with alternate functions including SPI2/I2S2 clock and USART2 CTS."+      },+      {+        "number": "85",+        "name": "PD4",+        "type": "bidirectional",+        "description": "GPIO port D pin 4 with alternate functions including USART2 RTS."+      },+      {+        "number": "86",+        "name": "PD5",+        "type": "bidirectional",+        "description": "GPIO port D pin 5 with alternate functions including USART2 TX."+      },+      {+        "number": "87",+        "name": "PD6",+        "type": "bidirectional",+        "description": "GPIO port D pin 6 with alternate functions including SPI3/I2S3 MOSI and USART2 RX."+      },+      {+        "number": "88",+        "name": "PD7",+        "type": "bidirectional",+        "description": "GPIO port D pin 7 with alternate functions including USART2 clock."+      },+      {+        "number": "89",+        "name": "PB3",+        "type": "bidirectional",+        "description": "GPIO port B pin 3 serving as JTAG TDO and serial wire debug output with alternate functions for SPI1/3 clock, I2C2 SDA, TIM2 channel 2, and event output."+      },+      {+        "number": "90",+        "name": "PB4",+        "type": "bidirectional",+        "description": "GPIO port B pin 4 serving as JTAG TRST with alternate functions including SPI1 MISO, SPI3 MISO, I2S3 extension SD, I2C3 SDA, TIM3 channel 1, and event output."+      },+      {+        "number": "91",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B pin 5 with alternate functions including SPI1 MOSI, SPI3/I2S3 MOSI, I2C1 SMB alert, TIM3 channel 2, and event output."+      },+      {+        "number": "92",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO port B pin 6 with alternate functions including I2C1 SCL, USART1 TX, TIM4 channel 1, and event output."+      },+      {+        "number": "93",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO port B pin 7 with alternate functions including I2C1 SDA, USART1 RX, TIM4 channel 2, and event output."+      },+      {+        "number": "94",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot mode selection pin (0 = boot from Flash, 1 = boot from system memory) with 9 V absolute maximum input voltage."+      },+      {+        "number": "95",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO port B pin 8 with alternate functions including I2C1 SCL, TIM4 channel 3, TIM10 channel 1, and SDIO data 4."+      },+      {+        "number": "96",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO port B pin 9 with alternate functions including SPI2/I2S2 chip select, I2C1 SDA, TIM4 channel 4, TIM11 channel 1, and SDIO data 5."+      },+      {+        "number": "97",+        "name": "PE0",+        "type": "bidirectional",+        "description": "GPIO port E pin 0 with alternate functions including TIM4 external trigger and event output."+      },+      {+        "number": "98",+        "name": "PE1",+        "type": "bidirectional",+        "description": "GPIO port E pin 1 with alternate functions including TIM1 channel 2N and event output."+      },+      {+        "number": "99",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return path for main power supply."+      },+      {+        "number": "100",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply pin accepting 1.7 to 3.6 V for device core and I/O logic."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: VREF- and VSSA are combined on the same pin (pin 20) per Table 8 - both analog ground and ADC negati",+          "56/100 pins cited to the wrong page (name found elsewhere): ['45:PE14@p37', '46:PE15@p37', '47:PB10@p37', '48:VCAP_1@p37']"+        ],+        "pages_sent": 139,+        "cost_usd": 1.4277,+        "at": "2026-09-24T06:50:24"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918728519639040",+        "pages": 139,+        "sha256": "c38f92aa9d66e8cb",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 100,+        "described": 100,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file