← Commit history

Initial commit: component/stm32f401rbt6

Ray ·df52580356 ·
2 files changed +593
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F401RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F401RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain supply voltage (1.65 to 3.6 V) for RTC, backup registers, and external oscillator when VDD is absent. |+| 2 | PC13 | bidirectional | GPIO Port C pin 13 (5 V tolerant) with RTC event/tamper and output capability for 5 V I/O level on backup power domain. |+| 3 | PC14-OSC32_IN | bidirectional | GPIO Port C pin 14 or 32 kHz oscillator input (5 V tolerant) for low-speed external crystal resonator. |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO Port C pin 15 or 32 kHz oscillator output (5 V tolerant) for low-speed external crystal resonator. |+| 5 | PH0-OSC_IN | bidirectional | GPIO Port H pin 0 or main oscillator input (5 V tolerant) for 4-26 MHz external crystal or clock source. |+| 6 | PH1-OSC_OUT | bidirectional | GPIO Port H pin 1 or main oscillator output (5 V tolerant) for 4-26 MHz external crystal or clock source. |+| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up (30-50 kΩ) and 100 ns input filtering; external capacitor recommended. |+| 8 | PC0 | bidirectional | GPIO Port C pin 0 (5 V tolerant) with ADC1 input channel 10 capability. |+| 9 | PC1 | bidirectional | GPIO Port C pin 1 (5 V tolerant) with ADC1 input channel 11 capability. |+| 10 | PC2 | bidirectional | GPIO Port C pin 2 (5 V tolerant) with SPI2/I2S2 MISO and ADC1 channel 12 capability. |+| 11 | PC3 | bidirectional | GPIO Port C pin 3 (5 V tolerant) with SPI2/I2S2 MOSI and ADC1 channel 13 capability. |+| 12 | VSSA/VREF- | power_in | Analog ground and negative reference for ADC; must be connected to VSS with decoupling capacitors. |+| 13 | VDDA/VREF+ | power_in | Analog supply and positive reference for ADC (1.7-3.6 V); must be connected to VDD with decoupling capacitors and close to device. |+| 14 | PA0 | bidirectional | GPIO Port A pin 0 (5 V tolerant) with USART2/Timer/ADC channel 0 and WKUP/TIM2_ETR function in regulator ON mode. |+| 15 | PA1 | bidirectional | GPIO Port A pin 1 (5 V tolerant) with USART2/Timer/ADC channel 1 capability. |+| 16 | PA2 | bidirectional | GPIO Port A pin 2 (5 V tolerant) with USART2/Timer/ADC channel 2 capability. |+| 17 | PA3 | bidirectional | GPIO Port A pin 3 (5 V tolerant) with USART2/Timer/ADC channel 3 capability. |+| 18 | VSS | power_in | Ground reference (0 V) for digital logic; must be connected to external supply ground. |+| 19 | VDD | power_in | Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device. |+| 20 | PA4 | bidirectional | GPIO Port A pin 4 (5 V tolerant) with SPI1/SPI3/USART2/ADC channel 4 capability. |+| 21 | PA5 | bidirectional | GPIO Port A pin 5 (5 V tolerant) with SPI1 clock and Timer/ADC channel 5 capability. |+| 22 | PA6 | bidirectional | GPIO Port A pin 6 (5 V tolerant) with SPI1 MISO and Timer/ADC channel 6 capability. |+| 23 | PA7 | bidirectional | GPIO Port A pin 7 (5 V tolerant) with SPI1 MOSI and Timer/ADC channel 7 capability. |+| 24 | PC4 | bidirectional | GPIO Port C pin 4 (5 V tolerant) with ADC1 input channel 14 capability. |+| 25 | PC5 | bidirectional | GPIO Port C pin 5 (5 V tolerant) with ADC1 input channel 15 capability. |+| 26 | PB0 | bidirectional | GPIO Port B pin 0 (5 V tolerant) with Timer/ADC channel 8 capability. |+| 27 | PB1 | bidirectional | GPIO Port B pin 1 (5 V tolerant) with Timer/ADC channel 9 capability. |+| 28 | PB2 | bidirectional | GPIO Port B pin 2 (5 V tolerant) with BOOT1 function in backup domain. |+| 29 | PB10 | bidirectional | GPIO Port B pin 10 (5 V tolerant) with I2C2 clock and Timer/SPI capability. |+| 30 | VCAP_1 | passive | Capacitor connection pin for internal voltage regulator; requires 2.2 µF ceramic capacitor with ESR < 2 Ω. |+| 31 | VSS | power_in | Ground reference (0 V) for digital logic; must be connected to external supply ground. |+| 32 | VDD | power_in | Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device. |+| 33 | PB12 | bidirectional | GPIO Port B pin 12 (5 V tolerant) with SPI2/I2C2/Timer capability and SMBus alert function. |+| 34 | PB13 | bidirectional | GPIO Port B pin 13 (5 V tolerant) with SPI2/I2S2 clock and Timer capability. |+| 35 | PB14 | bidirectional | GPIO Port B pin 14 (5 V tolerant) with SPI2/I2S2 MISO and Timer capability. |+| 36 | PB15 | bidirectional | GPIO Port B pin 15 (5 V tolerant) with SPI2/I2S2 MOSI and Timer capability; can provide RTC reference input. |+| 37 | PC6 | bidirectional | GPIO Port C pin 6 (5 V tolerant) with I2S2/USART6/Timer/SDIO capability and master clock output. |+| 38 | PC7 | bidirectional | GPIO Port C pin 7 (5 V tolerant) with I2S3/USART6/Timer/SDIO capability and master clock output. |+| 39 | PC8 | bidirectional | GPIO Port C pin 8 (5 V tolerant) with USART6/Timer/SDIO data line capability. |+| 40 | PC9 | bidirectional | GPIO Port C pin 9 (5 V tolerant) with I2C3/Timer/SDIO/MCO2 and I2S clock input capability. |+| 41 | PA8 | bidirectional | GPIO Port A pin 8 (5 V tolerant) with I2C3/USART1/Timer/USB/MCO1 and debug function. |+| 42 | PA9 | bidirectional | GPIO Port A pin 9 (5 V tolerant) with I2C3/USART1/Timer/USB VBUS sensing capability. |+| 43 | PA10 | bidirectional | GPIO Port A pin 10 (5 V tolerant) with USART1/Timer/USB ID detection capability. |+| 44 | PA11 | bidirectional | GPIO Port A pin 11 (5 V tolerant) with USART1/Timer/USB DM (D minus) signal line. |+| 45 | PA12 | bidirectional | GPIO Port A pin 12 (5 V tolerant) with USART1/Timer/USB DP (D plus) signal line. |+| 46 | PA13 (JTMS-SWDIO) | bidirectional | GPIO Port A pin 13 or JTAG/SWD debug port pin SWDIO (5 V tolerant); used for in-circuit debug. |+| 47 | VSS | power_in | Ground reference (0 V) for digital logic; must be connected to external supply ground. |+| 48 | VDD | power_in | Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device. |+| 49 | PA14 (JTCK-SWCLK) | bidirectional | GPIO Port A pin 14 or JTAG/SWD debug port pin SWCLK (5 V tolerant); used for in-circuit debug. |+| 50 | PA15 (JTDI) | bidirectional | GPIO Port A pin 15 or JTAG debug port pin JTDI (5 V tolerant) with SPI/Timer capability. |+| 51 | PC10 | bidirectional | GPIO Port C pin 10 (5 V tolerant) with SPI3/I2S3 clock and SDIO data line capability. |+| 52 | PC11 | bidirectional | GPIO Port C pin 11 (5 V tolerant) with SPI3/I2S3 MISO and SDIO data line capability. |+| 53 | PC12 | bidirectional | GPIO Port C pin 12 (5 V tolerant) with SPI3/I2S3 MOSI and SDIO clock capability. |+| 54 | PD2 | bidirectional | GPIO Port D pin 2 (5 V tolerant) with Timer external trigger and SDIO command line capability. |+| 55 | PB3 (JTDO-SWO) | bidirectional | GPIO Port B pin 3 or JTAG debug port pin JTDO/SWO (5 V tolerant) with SPI/I2C/Timer capability. |+| 56 | PB4 (NJTRST) | bidirectional | GPIO Port B pin 4 or JTAG debug port pin NJTRST (5 V tolerant) with SPI/I2C/Timer capability. |+| 57 | PB5 | bidirectional | GPIO Port B pin 5 (5 V tolerant) with SPI1/SPI3/I2C1/Timer capability. |+| 58 | PB6 | bidirectional | GPIO Port B pin 6 (5 V tolerant) with I2C1 clock and USART1/Timer capability. |+| 59 | PB7 | bidirectional | GPIO Port B pin 7 (5 V tolerant) with I2C1 data and USART1/Timer capability. |+| 60 | BOOT0 | input | Boot pin for selecting boot mode (0: Boot from Flash, 1: Boot from system memory); must be pulled to VSS or VDD. |+| 61 | PB8 | bidirectional | GPIO Port B pin 8 (5 V tolerant) with I2C1/Timer/SDIO data line capability. |+| 62 | PB9 | bidirectional | GPIO Port B pin 9 (5 V tolerant) with SPI2/I2S2/I2C1/Timer/SDIO data line capability. |+| 63 | VSS | power_in | Ground reference (0 V) for digital logic; must be connected to external supply ground. |+| 64 | VDD | power_in | Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F401RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f401rbt6-etched.step` / `stm32f401rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f401rbt6.step` / `stm32f401rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182401932873728) (139 pp, sha256 `ea0100f21bbbb0da`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f401rbt6-datasheet.pdf)
page.jsonadded+493
@@ -0,0 +1,493 @@+{+  "slug": "stm32f401rbt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f401rbt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f401rbt6.kicad_sym",+    "stm32f401rbt6.kicad_mod",+    "stm32f401rbt6.glb",+    "stm32f401rbt6.step",+    "stm32f401rbt6.lbr",+    "docs/hero.png",+    "docs/stm32f401rbt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F401RBT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182401932873728",+    "parts": {+      "symbol": "stm32f401rbt6.kicad_sym",+      "footprint": "stm32f401rbt6.kicad_mod",+      "model_3d": "stm32f401rbt6-etched.glb",+      "model_3d_plain": "stm32f401rbt6.glb",+      "model_3d_step": "stm32f401rbt6-etched.step",+      "model_3d_step_plain": "stm32f401rbt6.step",+      "lbr": "stm32f401rbt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C75278",+      "digikey": "497-17428-ND",+      "mouser": "511-STM32F401RBT6"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T22:28:58Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-17428-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F401RBT6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup domain supply voltage (1.65 to 3.6 V) for RTC, backup registers, and external oscillator when VDD is absent."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO Port C pin 13 (5 V tolerant) with RTC event/tamper and output capability for 5 V I/O level on backup power domain."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO Port C pin 14 or 32 kHz oscillator input (5 V tolerant) for low-speed external crystal resonator."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO Port C pin 15 or 32 kHz oscillator output (5 V tolerant) for low-speed external crystal resonator."+      },+      {+        "number": "5",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "GPIO Port H pin 0 or main oscillator input (5 V tolerant) for 4-26 MHz external crystal or clock source."+      },+      {+        "number": "6",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "GPIO Port H pin 1 or main oscillator output (5 V tolerant) for 4-26 MHz external crystal or clock source."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with embedded weak pull-up (30-50 kΩ) and 100 ns input filtering; external capacitor recommended."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO Port C pin 0 (5 V tolerant) with ADC1 input channel 10 capability."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO Port C pin 1 (5 V tolerant) with ADC1 input channel 11 capability."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO Port C pin 2 (5 V tolerant) with SPI2/I2S2 MISO and ADC1 channel 12 capability."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO Port C pin 3 (5 V tolerant) with SPI2/I2S2 MOSI and ADC1 channel 13 capability."+      },+      {+        "number": "12",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground and negative reference for ADC; must be connected to VSS with decoupling capacitors."+      },+      {+        "number": "13",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog supply and positive reference for ADC (1.7-3.6 V); must be connected to VDD with decoupling capacitors and close to device."+      },+      {+        "number": "14",+        "name": "PA0",+        "type": "bidirectional",+        "description": "GPIO Port A pin 0 (5 V tolerant) with USART2/Timer/ADC channel 0 and WKUP/TIM2_ETR function in regulator ON mode."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO Port A pin 1 (5 V tolerant) with USART2/Timer/ADC channel 1 capability."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO Port A pin 2 (5 V tolerant) with USART2/Timer/ADC channel 2 capability."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO Port A pin 3 (5 V tolerant) with USART2/Timer/ADC channel 3 capability."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference (0 V) for digital logic; must be connected to external supply ground."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO Port A pin 4 (5 V tolerant) with SPI1/SPI3/USART2/ADC channel 4 capability."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO Port A pin 5 (5 V tolerant) with SPI1 clock and Timer/ADC channel 5 capability."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO Port A pin 6 (5 V tolerant) with SPI1 MISO and Timer/ADC channel 6 capability."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO Port A pin 7 (5 V tolerant) with SPI1 MOSI and Timer/ADC channel 7 capability."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO Port C pin 4 (5 V tolerant) with ADC1 input channel 14 capability."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO Port C pin 5 (5 V tolerant) with ADC1 input channel 15 capability."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO Port B pin 0 (5 V tolerant) with Timer/ADC channel 8 capability."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO Port B pin 1 (5 V tolerant) with Timer/ADC channel 9 capability."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO Port B pin 2 (5 V tolerant) with BOOT1 function in backup domain."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO Port B pin 10 (5 V tolerant) with I2C2 clock and Timer/SPI capability."+      },+      {+        "number": "30",+        "name": "VCAP_1",+        "type": "passive",+        "description": "Capacitor connection pin for internal voltage regulator; requires 2.2 µF ceramic capacitor with ESR < 2 Ω."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference (0 V) for digital logic; must be connected to external supply ground."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO Port B pin 12 (5 V tolerant) with SPI2/I2C2/Timer capability and SMBus alert function."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO Port B pin 13 (5 V tolerant) with SPI2/I2S2 clock and Timer capability."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO Port B pin 14 (5 V tolerant) with SPI2/I2S2 MISO and Timer capability."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO Port B pin 15 (5 V tolerant) with SPI2/I2S2 MOSI and Timer capability; can provide RTC reference input."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO Port C pin 6 (5 V tolerant) with I2S2/USART6/Timer/SDIO capability and master clock output."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO Port C pin 7 (5 V tolerant) with I2S3/USART6/Timer/SDIO capability and master clock output."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO Port C pin 8 (5 V tolerant) with USART6/Timer/SDIO data line capability."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO Port C pin 9 (5 V tolerant) with I2C3/Timer/SDIO/MCO2 and I2S clock input capability."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO Port A pin 8 (5 V tolerant) with I2C3/USART1/Timer/USB/MCO1 and debug function."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO Port A pin 9 (5 V tolerant) with I2C3/USART1/Timer/USB VBUS sensing capability."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO Port A pin 10 (5 V tolerant) with USART1/Timer/USB ID detection capability."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO Port A pin 11 (5 V tolerant) with USART1/Timer/USB DM (D minus) signal line."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO Port A pin 12 (5 V tolerant) with USART1/Timer/USB DP (D plus) signal line."+      },+      {+        "number": "46",+        "name": "PA13 (JTMS-SWDIO)",+        "type": "bidirectional",+        "description": "GPIO Port A pin 13 or JTAG/SWD debug port pin SWDIO (5 V tolerant); used for in-circuit debug."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference (0 V) for digital logic; must be connected to external supply ground."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device."+      },+      {+        "number": "49",+        "name": "PA14 (JTCK-SWCLK)",+        "type": "bidirectional",+        "description": "GPIO Port A pin 14 or JTAG/SWD debug port pin SWCLK (5 V tolerant); used for in-circuit debug."+      },+      {+        "number": "50",+        "name": "PA15 (JTDI)",+        "type": "bidirectional",+        "description": "GPIO Port A pin 15 or JTAG debug port pin JTDI (5 V tolerant) with SPI/Timer capability."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO Port C pin 10 (5 V tolerant) with SPI3/I2S3 clock and SDIO data line capability."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO Port C pin 11 (5 V tolerant) with SPI3/I2S3 MISO and SDIO data line capability."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO Port C pin 12 (5 V tolerant) with SPI3/I2S3 MOSI and SDIO clock capability."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO Port D pin 2 (5 V tolerant) with Timer external trigger and SDIO command line capability."+      },+      {+        "number": "55",+        "name": "PB3 (JTDO-SWO)",+        "type": "bidirectional",+        "description": "GPIO Port B pin 3 or JTAG debug port pin JTDO/SWO (5 V tolerant) with SPI/I2C/Timer capability."+      },+      {+        "number": "56",+        "name": "PB4 (NJTRST)",+        "type": "bidirectional",+        "description": "GPIO Port B pin 4 or JTAG debug port pin NJTRST (5 V tolerant) with SPI/I2C/Timer capability."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO Port B pin 5 (5 V tolerant) with SPI1/SPI3/I2C1/Timer capability."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO Port B pin 6 (5 V tolerant) with I2C1 clock and USART1/Timer capability."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO Port B pin 7 (5 V tolerant) with I2C1 data and USART1/Timer capability."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot pin for selecting boot mode (0: Boot from Flash, 1: Boot from system memory); must be pulled to VSS or VDD."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO Port B pin 8 (5 V tolerant) with I2C1/Timer/SDIO data line capability."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO Port B pin 9 (5 V tolerant) with SPI2/I2S2/I2C1/Timer/SDIO data line capability."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference (0 V) for digital logic; must be connected to external supply ground."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Main power supply (1.7-3.6 V); must be decoupled with ceramic capacitors placed close to device."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Multiple power/ground pins: VDD (pins 19, 32, 48, 64) and VSS (pins 18, 31, 47, 63) are distributed ; VCAP_1 (pin 30): External 2.2 µF ceramic capacitor with ESR < 2 Ω must be connected close to this pi; BOOT0 (pin 60): Boot selection pin must be pulled to a defined level (VSS or VDD) via external resis"+        ],+        "pages_sent": 139,+        "cost_usd": 1.7004,+        "at": "2026-09-24T22:28:27"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182401932873728",+        "pages": 139,+        "sha256": "ea0100f21bbbb0da",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file