← Commit history

Initial commit: component/stm32f373c8t6

Ray ·fd5abb7315 ·
2 files changed +481
README.mdadded+84
@@ -0,0 +1,84 @@+# STM32F373C8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F373C8T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain power supply (1.65 to 3.6 V) for RTC and backup registers when VDD is not present |+| 2 | PC13 | bidirectional | Standard 3.3V tolerant I/O pin supplied through power switch with limited sink current, supporting RTC alarm and calibration outputs |+| 3 | PC14 | bidirectional | Standard 3.3V tolerant I/O pin, alternate function as OSC32_IN for 32 kHz external crystal oscillator input |+| 4 | PC15 | bidirectional | Standard 3.3V tolerant I/O pin, alternate function as OSC32_OUT for 32 kHz external crystal oscillator output |+| 5 | PF0 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode, alternate function as I2C2_SDA or OSC_IN |+| 6 | PF1 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode, alternate function as I2C2_SCL or OSC_OUT |+| 7 | NRST | bidirectional | Device reset input/internal reset output (active low) with embedded weak pull-up resistor (25-55 kΩ) and Schmitt trigger |+| 8 | VSSA/VREF- | power_in | Analog ground and negative reference voltage for ADC, DAC, and comparators (0 V typical) |+| 9 | VDDA/VREF+ | power_in | Analog power supply (2.4 to 3.6 V) and positive reference voltage for ADC, DAC, and comparators |+| 10 | PA0 | bidirectional | 3.3V-tolerant I/O pin directly connected to ADC (ADC_IN0), supporting timer, USART, comparator, and touch sensing alternate functions |+| 11 | PA1 | bidirectional | 3.3V-tolerant I/O pin with ADC input (ADC_IN1), supporting SPI, timer, and RTC reference clock functions |+| 12 | PA2 | bidirectional | 3.3V-tolerant I/O pin with ADC input (ADC_IN2), supporting SPI, USART, timer, and comparator functions |+| 13 | PA3 | bidirectional | 3.3V-tolerant I/O pin with ADC input (ADC_IN3), supporting SPI, USART, timer, and comparator functions |+| 14 | PA4 | bidirectional | 3.3V-tolerant I/O pin with DAC1 output (DAC1_OUT1) and ADC input (ADC_IN4), supporting SPI, timer, and touch sensing functions |+| 15 | PA5 | bidirectional | 3.3V-tolerant I/O pin with DAC1 output (DAC1_OUT2) and ADC input (ADC_IN5), supporting SPI clock and timer functions |+| 16 | PA6 | bidirectional | 3.3V-tolerant I/O pin with DAC2 output (DAC2_OUT1) and ADC input (ADC_IN6), supporting SPI and timer functions |+| 17 | VDD_2 | power_in | Digital power supply pin (2.0 to 3.6 V) for I/O logic and internal core |+| 18 | PB0 | bidirectional | 3.3V-tolerant I/O pin with ADC input (ADC_IN8) and SDADC differential input (SDADC1_AIN6P), supporting SPI and timer functions |+| 19 | PB1 | bidirectional | 3.3V-tolerant I/O pin with ADC input (ADC_IN9) and SDADC inputs, supporting timer functions |+| 20 | PB2 | bidirectional | Standard 3.3V I/O pin powered by VDDSD12 supply with SDADC input connections (SDADC1_AIN4P, SDADC2_AIN6P) |+| 21 | PE8 | bidirectional | Standard 3.3V I/O pin powered by VDDSD12 supply with SDADC input connections (SDADC1_AIN8P, SDADC2_AIN8P) |+| 22 | PE9 | bidirectional | Standard 3.3V I/O pin powered by VDDSD12 supply with SDADC input and output connections |+| 23 | VREFSD- | power_in | SDADC negative reference voltage and ground input (0 V typical), shared with VSSSD |+| 24 | VDDSD | power_in | SDADC1, SDADC2, SDADC3 combined power supply (2.2 to 3.6 V for SDADC operation) |+| 25 | VREFSD+ | power_in | SDADC positive reference voltage (1.1 to VDDSD3), supports internal 1.2 V and 1.8 V buffered references with programmable gain |+| 26 | PB14 | bidirectional | Standard 3.3V I/O pin powered by VDDSD3 supply with SDADC differential input (SDADC3_AIN8P), supporting SPI and timer functions |+| 27 | PB15 | bidirectional | Standard 3.3V I/O pin powered by VDDSD3 supply with SDADC inputs and RTC reference clock, supporting SPI and timer functions |+| 28 | PD8 | bidirectional | Standard 3.3V I/O pin powered by VDDSD3 supply with SDADC input (SDADC3_AIN6P), supporting SPI and USART functions |+| 29 | PA8 | bidirectional | 5V-tolerant I/O pin supporting master clock output (MCO), I2C, USART, timer, and SPI alternate functions |+| 30 | PA9 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C2_SCL), USART transmit, and timer functions |+| 31 | PA10 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C2_SDA), USART receive, and timer functions |+| 32 | PA11 | bidirectional | 5V-tolerant I/O pin supporting CAN receiver (CAN_RX), USB D- (USB_DM), SPI, and timer alternate functions |+| 33 | PA12 | bidirectional | 5V-tolerant I/O pin supporting CAN transmitter (CAN_TX), USB D+ (USB_DP), SPI, and timer alternate functions |+| 34 | PA13 | bidirectional | 5V-tolerant I/O pin supporting SWDIO debug interface (JTMS), infrared output (IR_OUT), SPI, USART, and timer functions |+| 35 | PF6 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C2_SCL), SPI, USART, and timer functions |+| 36 | PF7 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C2_SDA) and USART clock functions |+| 37 | PA14 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting SWCLK debug interface (JTCK) and I2C data (I2C1_SDA) function |+| 38 | PA15 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting JTDI debug interface, I2C, SPI, and touch sensing functions |+| 39 | PB3 | bidirectional | 5V-tolerant I/O pin supporting SPI clock (SPI1_SCK/I2S1_CK), USART transmit, timer, and debug trace output (TRACESWO) functions |+| 40 | PB4 | bidirectional | 5V-tolerant I/O pin supporting SPI data input (SPI1_MISO), USART receive, timer, and NJTST debug functions |+| 41 | PB5 | bidirectional | 5V-tolerant I/O pin supporting SPI data output (SPI1_MOSI), I2C alternative clock (I2C1_SMBA), USART clock, and timer functions |+| 42 | PB6 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C1_SCL), USART transmit, timer, and touch sensing functions |+| 43 | PB7 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C1_SDA), USART receive, timer, and touch sensing functions |+| 44 | BOOT0 | input | Dedicated boot pin selects boot source (system memory, user flash, or SRAM) on device startup; can sustain 0 to 5.5 V with pull-down |+| 45 | PB8 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C1_SCL), CAN receiver (CAN_RX), SPI, timer, and touch sensing functions |+| 46 | PB9 | bidirectional | 5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C1_SDA), CAN transmitter (CAN_TX), infrared output, timer, and touch sensing functions |+| 47 | VSS_1 | power_in | Digital ground return path for I/O logic and internal circuits |+| 48 | VDD_1 | power_in | Digital power supply (2.0 to 3.6 V) for core logic and I/O |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F373C8T6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f373c8t6-etched.step` / `stm32f373c8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f373c8t6.step` / `stm32f373c8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884030959443968) (137 pp, sha256 `fd00ebf096b21764`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f373c8t6-datasheet.pdf)
page.jsonadded+397
@@ -0,0 +1,397 @@+{+  "slug": "stm32f373c8t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f373c8t6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f373c8t6.kicad_sym",+    "stm32f373c8t6.kicad_mod",+    "stm32f373c8t6.glb",+    "stm32f373c8t6.step",+    "stm32f373c8t6.lbr",+    "docs/hero.png",+    "docs/stm32f373c8t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F373C8T6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884030959443968",+    "parts": {+      "symbol": "stm32f373c8t6.kicad_sym",+      "footprint": "stm32f373c8t6.kicad_mod",+      "model_3d": "stm32f373c8t6-etched.glb",+      "model_3d_plain": "stm32f373c8t6.glb",+      "model_3d_step": "stm32f373c8t6-etched.step",+      "model_3d_step_plain": "stm32f373c8t6.step",+      "lbr": "stm32f373c8t6.lbr"+    },+    "distributor_links": {+      "lcsc": "C404020",+      "digikey": "497-13306-ND",+      "mouser": "511-STM32F373C8T6"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T14:56:56Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-13306-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F373C8T6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup domain power supply (1.65 to 3.6 V) for RTC and backup registers when VDD is not present"+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "Standard 3.3V tolerant I/O pin supplied through power switch with limited sink current, supporting RTC alarm and calibration outputs"+      },+      {+        "number": "3",+        "name": "PC14",+        "type": "bidirectional",+        "description": "Standard 3.3V tolerant I/O pin, alternate function as OSC32_IN for 32 kHz external crystal oscillator input"+      },+      {+        "number": "4",+        "name": "PC15",+        "type": "bidirectional",+        "description": "Standard 3.3V tolerant I/O pin, alternate function as OSC32_OUT for 32 kHz external crystal oscillator output"+      },+      {+        "number": "5",+        "name": "PF0",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode, alternate function as I2C2_SDA or OSC_IN"+      },+      {+        "number": "6",+        "name": "PF1",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode, alternate function as I2C2_SCL or OSC_OUT"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Device reset input/internal reset output (active low) with embedded weak pull-up resistor (25-55 kΩ) and Schmitt trigger"+      },+      {+        "number": "8",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground and negative reference voltage for ADC, DAC, and comparators (0 V typical)"+      },+      {+        "number": "9",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog power supply (2.4 to 3.6 V) and positive reference voltage for ADC, DAC, and comparators"+      },+      {+        "number": "10",+        "name": "PA0",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin directly connected to ADC (ADC_IN0), supporting timer, USART, comparator, and touch sensing alternate functions"+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with ADC input (ADC_IN1), supporting SPI, timer, and RTC reference clock functions"+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with ADC input (ADC_IN2), supporting SPI, USART, timer, and comparator functions"+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with ADC input (ADC_IN3), supporting SPI, USART, timer, and comparator functions"+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with DAC1 output (DAC1_OUT1) and ADC input (ADC_IN4), supporting SPI, timer, and touch sensing functions"+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with DAC1 output (DAC1_OUT2) and ADC input (ADC_IN5), supporting SPI clock and timer functions"+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with DAC2 output (DAC2_OUT1) and ADC input (ADC_IN6), supporting SPI and timer functions"+      },+      {+        "number": "17",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Digital power supply pin (2.0 to 3.6 V) for I/O logic and internal core"+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with ADC input (ADC_IN8) and SDADC differential input (SDADC1_AIN6P), supporting SPI and timer functions"+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "3.3V-tolerant I/O pin with ADC input (ADC_IN9) and SDADC inputs, supporting timer functions"+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "Standard 3.3V I/O pin powered by VDDSD12 supply with SDADC input connections (SDADC1_AIN4P, SDADC2_AIN6P)"+      },+      {+        "number": "21",+        "name": "PE8",+        "type": "bidirectional",+        "description": "Standard 3.3V I/O pin powered by VDDSD12 supply with SDADC input connections (SDADC1_AIN8P, SDADC2_AIN8P)"+      },+      {+        "number": "22",+        "name": "PE9",+        "type": "bidirectional",+        "description": "Standard 3.3V I/O pin powered by VDDSD12 supply with SDADC input and output connections"+      },+      {+        "number": "23",+        "name": "VREFSD-",+        "type": "power_in",+        "description": "SDADC negative reference voltage and ground input (0 V typical), shared with VSSSD"+      },+      {+        "number": "24",+        "name": "VDDSD",+        "type": "power_in",+        "description": "SDADC1, SDADC2, SDADC3 combined power supply (2.2 to 3.6 V for SDADC operation)"+      },+      {+        "number": "25",+        "name": "VREFSD+",+        "type": "power_in",+        "description": "SDADC positive reference voltage (1.1 to VDDSD3), supports internal 1.2 V and 1.8 V buffered references with programmable gain"+      },+      {+        "number": "26",+        "name": "PB14",+        "type": "bidirectional",+        "description": "Standard 3.3V I/O pin powered by VDDSD3 supply with SDADC differential input (SDADC3_AIN8P), supporting SPI and timer functions"+      },+      {+        "number": "27",+        "name": "PB15",+        "type": "bidirectional",+        "description": "Standard 3.3V I/O pin powered by VDDSD3 supply with SDADC inputs and RTC reference clock, supporting SPI and timer functions"+      },+      {+        "number": "28",+        "name": "PD8",+        "type": "bidirectional",+        "description": "Standard 3.3V I/O pin powered by VDDSD3 supply with SDADC input (SDADC3_AIN6P), supporting SPI and USART functions"+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting master clock output (MCO), I2C, USART, timer, and SPI alternate functions"+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C2_SCL), USART transmit, and timer functions"+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C2_SDA), USART receive, and timer functions"+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting CAN receiver (CAN_RX), USB D- (USB_DM), SPI, and timer alternate functions"+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting CAN transmitter (CAN_TX), USB D+ (USB_DP), SPI, and timer alternate functions"+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting SWDIO debug interface (JTMS), infrared output (IR_OUT), SPI, USART, and timer functions"+      },+      {+        "number": "35",+        "name": "PF6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C2_SCL), SPI, USART, and timer functions"+      },+      {+        "number": "36",+        "name": "PF7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C2_SDA) and USART clock functions"+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting SWCLK debug interface (JTCK) and I2C data (I2C1_SDA) function"+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting JTDI debug interface, I2C, SPI, and touch sensing functions"+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting SPI clock (SPI1_SCK/I2S1_CK), USART transmit, timer, and debug trace output (TRACESWO) functions"+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting SPI data input (SPI1_MISO), USART receive, timer, and NJTST debug functions"+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin supporting SPI data output (SPI1_MOSI), I2C alternative clock (I2C1_SMBA), USART clock, and timer functions"+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C1_SCL), USART transmit, timer, and touch sensing functions"+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C1_SDA), USART receive, timer, and touch sensing functions"+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot pin selects boot source (system memory, user flash, or SRAM) on device startup; can sustain 0 to 5.5 V with pull-down"+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C clock (I2C1_SCL), CAN receiver (CAN_RX), SPI, timer, and touch sensing functions"+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant I/O pin in Fast Mode+ capable mode supporting I2C data (I2C1_SDA), CAN transmitter (CAN_TX), infrared output, timer, and touch sensing functions"+      },+      {+        "number": "47",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Digital ground return path for I/O logic and internal circuits"+      },+      {+        "number": "48",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Digital power supply (2.0 to 3.6 V) for core logic and I/O"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 23-24 (VREFSD-, VDDSD) are mixed-signal power/reference pins with specific voltage constraints ; Pins 2, 3, 4 (PC13, PC14, PC15) supplied through power switch with ~3 mA sink limitation and require; Pins 20-22 and 26-28 (VDDSD12/VDDSD3 powered I/O pins PB2, PE8-E9, PB14-B15, PD8) require separate V"+        ],+        "pages_sent": 137,+        "cost_usd": 1.6752,+        "at": "2026-09-27T14:56:31"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884030959443968",+        "pages": 137,+        "sha256": "fd00ebf096b21764",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file