← Commit history
stm32f303k8t6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+88−8
package.json+46−6@@ -67,7 +67,7 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Main digital power supply, 2.0 to 3.6 V; decoupling capacitors (100 nF ceramic + 1 \u00b5F) required as close as possible to pin."+ "description": "Main digital power supply, 2.0 to 3.6 V; decoupling capacitors (100 nF ceramic + 1 µF) required as close as possible to pin." }, { "number": "2",@@ -85,13 +85,13 @@ "number": "4", "name": "NRST", "type": "bidirectional",- "description": "Bidirectional reset pin (RST type) with embedded weak pull-up resistor (25-55 k\u03a9 typical 40 k\u03a9); active-low device reset input / internal reset output; filters pulses shorter than 100 ns."+ "description": "Bidirectional reset pin (RST type) with embedded weak pull-up resistor (25-55 kΩ typical 40 kΩ); active-low device reset input / internal reset output; filters pulses shorter than 100 ns." }, { "number": "5", "name": "VDDA/VREF+", "type": "power_in",- "description": "Analog power supply and ADC/DAC positive reference voltage, 2.0 to 3.6 V (minimum 2.4 V when OPAMP or DAC are used); must be \u2265 VDD and must power on before or simultaneously with VDD."+ "description": "Analog power supply and ADC/DAC positive reference voltage, 2.0 to 3.6 V (minimum 2.4 V when OPAMP or DAC are used); must be ≥ VDD and must power on before or simultaneously with VDD." }, { "number": "6",@@ -247,7 +247,7 @@ "number": "31", "name": "BOOT0", "type": "input",- "description": "Dedicated boot mode selection pin (B type); sampled at reset to select boot source (user Flash, system memory, or embedded SRAM); input voltage range 0 to 9 V; VIL max = VDD\u22120.3 V, VIH min = 0.2\u00d7VDD+0.95 V."+ "description": "Dedicated boot mode selection pin (B type); sampled at reset to select boot source (user Flash, system memory, or embedded SRAM); input voltage range 0 to 9 V; VIL max = VDD−0.3 V, VIH min = 0.2×VDD+0.95 V." }, { "number": "32",@@ -288,6 +288,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32f303k8t6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.0,+ 9.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f303k8t6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.0,+ 9.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "af9c9248018f8112b5f560e55458c00d2578fd479e6e722643621250fae32ae1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -273,7 +273,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32f303k8t6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.0,+ 9.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f303k8t6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.0,+ 9.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "af9c9248018f8112b5f560e55458c00d2578fd479e6e722643621250fae32ae1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -320,4 +360,4 @@ "visibility": { "public": true }-}+}