component
STM32F302VCT6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
12ca960
STM32F302VCT6
STMicroelectronics · ST Microelectronics · LQFP-100(14x14)
STM32F302VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACECK, TIM3_CH1, TSC_G7_IO1, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACED0, TIM3_CH2, TSC_G7_IO2, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACED1, TIM3_CH3, TSC_G7_IO3, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACED2, TIM3_CH4, TSC_G7_IO4, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate function TRACED3, EVENTOUT; additional functions WKUP3, RTC_TAMP3. |
| 6 | VBAT | power_in | Backup power supply. |
| 7 | PC13 | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch, limited to 3 mA sink: output speed must not exceed 2 MHz with 30 pF maximum load and it must not be used as a current source; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT; alternate function TIM1_CH1N. |
| 8 | PC14/OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch with the same output limits as PC13 (maximum 2 MHz at 30 pF, no current-source use); additional function OSC32_IN. |
| 9 | PC15/OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch with the same output limits as PC13 (maximum 2 MHz at 30 pF, no current-source use); additional function OSC32_OUT. |
| 10 | PF9 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM15_CH1, SPI2_SCK, EVENTOUT. |
| 11 | PF10 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM15_CH2, SPI2_SCK, EVENTOUT. |
| 12 | PF0/OSC_IN | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions TIM1_CH3N, I2C2_SDA; additional function OSC_IN. |
| 13 | PF1/OSC_OUT | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate function I2C2_SCL; additional function OSC_OUT. |
| 14 | NRST | bidirectional | Device reset input / internal reset output (active low), bidirectional with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN6. |
| 16 | PC1 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN7. |
| 17 | PC2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN8. |
| 18 | PC3 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_BKIN2, EVENTOUT; additional function ADC12_IN9. |
| 19 | PF2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN10. |
| 20 | VSSA/VREF- | power_in | Analog ground / negative reference voltage. |
| 21 | VREF+ | power_in | Positive reference voltage; VREF+ functionality is available only on the 100-pin package. |
| 22 | VDDA | power_in | Analog power supply. |
| 23 | PA0 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, COMP1_OUT, EVENTOUT; additional functions ADC1_IN1, COMP1_INM, RTC_TAMP2, WKUP1. |
| 24 | PA1 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2, TIM15_CH1N, RTC_REFIN, EVENTOUT; additional functions ADC1_IN2, COMP1_INP, OPAMP1_VINP. |
| 25 | PA2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, COMP2_OUT, EVENTOUT; additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT. |
| 26 | PA3 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, EVENTOUT; additional functions ADC1_IN4, OPAMP1_VINP, COMP2_INP, OPAMP1_VINM. |
| 27 | PF4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions COMP1_OUT, EVENTOUT; additional function ADC1_IN5. |
| 28 | VDD | power_in | Digital power supply. |
| 29 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI1_NSS, SPI3_NSS, I2S3_WS, USART2_CK, TSC_G2_IO1, TIM3_CH2, EVENTOUT; additional functions ADC2_IN1, DAC1_OUT1, COMP1_INM, COMP2_INM, COMP4_INM, COMP6_INM. |
| 30 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2, EVENTOUT; additional functions ADC2_IN2, OPAMP1_VINP, OPAMP2_VINM, COMP1_INM, COMP2_INM, COMP4_INM, COMP6_INM. |
| 31 | PA6 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT; additional functions ADC2_IN3, OPAMP2_VOUT. |
| 32 | PA7 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N, TSC_G2_IO4, COMP2_OUT, EVENTOUT; additional functions ADC2_IN4, COMP2_INP, OPAMP2_VINP, OPAMP1_VINP. |
| 33 | PC4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions USART1_TX, EVENTOUT; additional function ADC2_IN5. |
| 34 | PC5 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART1_RX, TSC_G3_IO1, EVENTOUT; additional functions ADC2_IN11, OPAMP2_VINM, OPAMP1_VINM. |
| 35 | PB0 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT; additional functions COMP4_INP, OPAMP2_VINP. |
| 36 | PB1 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions TIM3_CH4, TIM1_CH3N, COMP4_OUT, TSC_G3_IO3, EVENTOUT. |
| 37 | PB2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions TSC_G3_IO4, EVENTOUT; additional functions ADC2_IN12, COMP4_INM. |
| 38 | PE7 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_ETR, EVENTOUT; additional function COMP4_INP. |
| 39 | PE8 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH1N, EVENTOUT; additional function COMP4_INM. |
| 40 | PE9 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions TIM1_CH1, EVENTOUT. |
| 41 | PE10 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH2N, EVENTOUT. |
| 42 | PE11 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH2, EVENTOUT. |
| 43 | PE12 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH3N, EVENTOUT. |
| 44 | PE13 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH3, EVENTOUT. |
| 45 | PE14 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions TIM1_CH4, TIM1_BKIN2, EVENTOUT. |
| 46 | PE15 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions USART3_RX, TIM1_BKIN, EVENTOUT. |
| 47 | PB10 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions USART3_TX, TIM2_CH3, TSC_SYNC, EVENTOUT. |
| 48 | PB11 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions USART3_RX, TIM2_CH4, TSC_G6_IO1, EVENTOUT; additional function COMP6_INP. |
| 49 | VSS | power_in | Digital ground. |
| 50 | VDD | power_in | Digital power supply. |
| 51 | PB12 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, TSC_G6_IO2, EVENTOUT. |
| 52 | PB13 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, TSC_G6_IO3, EVENTOUT. |
| 53 | PB14 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI2_MISO, I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4, EVENTOUT; additional function OPAMP2_VINP. |
| 54 | PB15 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N, TIM15_CH2, EVENTOUT; additional function COMP6_INM. |
| 55 | PD8 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_TX, EVENTOUT. |
| 56 | PD9 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_RX, EVENTOUT. |
| 57 | PD10 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_CK, EVENTOUT; additional function COMP6_INM. |
| 58 | PD11 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_CTS, EVENTOUT; additional function COMP6_INP. |
| 59 | PD12 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_RTS_DE, TIM4_CH1, TSC_G8_IO1, EVENTOUT. |
| 60 | PD13 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM4_CH2, TSC_G8_IO2, EVENTOUT. |
| 61 | PD14 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM4_CH3, TSC_G8_IO3, EVENTOUT; additional function OPAMP2_VINP. |
| 62 | PD15 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions SPI2_NSS, TIM4_CH4, TSC_G8_IO4, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions I2S2_MCK, COMP6_OUT, TIM3_CH1, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions I2S3_MCK, TIM3_CH2, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM3_CH3, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM3_CH4, I2S_CKIN, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V tolerant I/O (FT); alternate functions I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1, TIM4_ETR, MCO, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN, TSC_G4_IO1, EVENTOUT. |
| 69 | PA10 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM17_BKIN, TSC_G4_IO2, COMP6_OUT, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V tolerant I/O (FT); alternate functions USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1, COMP1_OUT, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V tolerant I/O (FT); alternate functions USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1, COMP2_OUT, EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V tolerant I/O (FT); alternate functions USART3_CTS, TIM4_CH3, TIM16_CH1N, TSC_G4_IO3, IR_OUT, SWDIO-JTMS, EVENTOUT. |
| 73 | PF6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf, function availability depends on device); alternate functions I2C2_SCL, USART3_RTS_DE, TIM4_CH4, EVENTOUT. |
| 74 | VSS | power_in | Ground. |
| 75 | VDD | power_in | Digital power supply. |
| 76 | PA14 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, USART2_TX, TIM1_BKIN, TSC_G4_IO4, SWCLK-JTCK, EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, SPI1_NSS, SPI3_NSS, I2S3_WS, JTDI, USART2_RX, TIM1_BKIN, TIM2_CH1_ETR, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions SPI3_SCK, I2S3_CK, USART3_TX, UART4_TX, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions SPI3_MISO, I2S3ext_SD, USART3_RX, UART4_RX, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions SPI3_MOSI, I2S3_SD, USART3_CK, UART5_TX, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate function CAN_RX, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate function CAN_TX, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions UART5_RX, TIM3_ETR, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_CTS, TIM2_CH1_ETR, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_RTS_DE, TIM2_CH2, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_TX, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_RX, TIM2_CH4, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_CK, TIM2_CH3, EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V tolerant I/O (FT); alternate functions SPI3_SCK, I2S3_CK, SPI1_SCK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR, TSC_G5_IO1, JTDO-TRACESWO, EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V tolerant I/O (FT); alternate functions SPI3_MISO, I2S3ext_SD, SPI1_MISO, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN, TSC_G5_IO2, NJTRST, EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V tolerant I/O (FT); alternate functions SPI3_MOSI, SPI1_MOSI, I2S3_SD, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2, TIM17_CH1, EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1, TSC_G5_IO3, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N, TSC_G5_IO4, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin used for boot memory selection. |
| 95 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM1_BKIN, TSC_SYNC, COMP1_OUT, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, IR_OUT, COMP2_OUT, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART1_TX, TIM4_ETR, TIM16_CH1, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART1_RX, TIM17_CH1, EVENTOUT. |
| 99 | VSS | power_in | Ground. |
| 100 | VDD | power_in | Digital power supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VBAT and VDD) | VDD-VSS | -0.3 | 4 | V | 57 | ||
| Allowed voltage difference for VDD > VDDA | VDD-VDDA | 0.4 | V | VDD > VDDA | 57 | ||
| Allowed voltage difference for VREF+ > VDDA | VREF+-VDDA | 0.4 | V | VREF+ > VDDA | 57 | ||
| Input voltage on TTa pins | VIN | 4 | V | 57 | |||
| Input voltage on any other pin | VIN | 4 | V | 57 | |||
| Input voltage on Boot0 pin | VIN | 0 | 9 | V | 57 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 57 | |||
| Variations between all the different ground pins (includes VREF-) | /VSSX −VSS/ | 50 | mV | 57 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 160 | mA | 58 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | -160 | mA | 58 | |||
| Maximum current into each VDD power line (source) | IVDD | 100 | mA | 58 | |||
| Maximum current out of each VSS ground line (sink) | IVSS | -100 | mA | 58 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 25 | mA | 58 | |||
| Output current source by any I/O and control pin | IIO(PIN) | -25 | mA | 58 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 80 | mA | 58 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -80 | mA | 58 | |||
| Injected current on FT, FTf and B pins | IINJ(PIN) | -5 | 0 | mA | 58 | ||
| Injected current on TC and RST pin | IINJ(PIN) | -5 | 5 | mA | 58 | ||
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | 58 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 58 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 58 | ||
| Maximum junction temperature | TJ | 150 | °C | 58 | |||
| Internal AHB clock frequency | fHCLK | 0 | 72 | MHz | 59 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 36 | MHz | 59 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 72 | MHz | 59 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 59 | ||
| Analog operating voltage | VDDA | 2 | 3.6 | V | OPAMP and DAC not used; must be equal to or higher than VDD | 59 | |
| Analog operating voltage | VDDA | 2.4 | 3.6 | V | OPAMP and DAC used | 59 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 59 | ||
| I/O input voltage (TC I/O) | VIN | -0.3 | V | 59 | |||
| I/O input voltage (TTa I/O) | VIN | -0.3 | V | 59 | |||
| I/O input voltage (FT and FTf I/O) | VIN | -0.3 | 5.5 | V | 59 | ||
| I/O input voltage (BOOT0) | VIN | 0 | 5.5 | V | 59 | ||
| Power dissipation (LQFP100) | PD | 488 | mW | TA = 85 °C for suffix 6 | 59 | ||
| Ambient temperature for 6 suffix version | TA | -40 | 85 | °C | Maximum power dissipation | 59 | |
| Ambient temperature for 6 suffix version | TA | -40 | 105 | °C | Low-power dissipation | 59 | |
| Junction temperature range (6 suffix version) | TJ | -40 | 105 | °C | 59 | ||
| Power on/power down reset threshold | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 60 |
| Power on/power down reset threshold | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 60 |
| POR reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 60 | |
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.25 | V | -40 °C < TA < +105 °C | 62 |
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.24 | V | -40 °C < TA < +85 °C | 62 |
| Internal reference voltage spread over the temperature range | VRERINT | 10 | mV | VDD = 3 V ±10 mV | 62 | ||
| Internal reference voltage temperature coefficient | TCoeff | 100 | ppm/°C | 62 | |||
| Supply current in Run mode, executing from Flash (HSE bypass) | IDD | 61.2 | 68.5 | mA | fHCLK 72 MHz; all peripherals enabled; VDD = 3.6 V; max at TA = 105 °C | 63 | |
| Supply current in Run mode, executing from RAM (HSE bypass) | IDD | 60.8 | 70.4 | mA | fHCLK 72 MHz; all peripherals enabled; VDD = 3.6 V; max at TA = 105 °C | 63 | |
| Supply current in Sleep mode, executing from Flash or RAM (HSE bypass) | IDD | 44 | 50.5 | mA | fHCLK 72 MHz; all peripherals enabled; VDD = 3.6 V; max at TA = 105 °C | 64 | |
| Supply current in Stop mode (regulator in run mode, all oscillators OFF) | IDD | 20.8 | 735 | µA | VDD = 3.6 V; max at TA = 105 °C | 65 | |
| Supply current in Stop mode (regulator in low-power mode, all oscillators OFF) | IDD | 8.33 | 720 | µA | VDD = 3.6 V; max at TA = 105 °C | 65 | |
| Supply current in Standby mode (LSI OFF and IWDG OFF) | IDD | 1.11 | 13.3 | µA | VDD = 3.6 V; max at TA = 105 °C | 65 | |
| Oscillator frequency (HSE) | fOSC_IN | 4 | 8 | 32 | MHz | 76 | |
| HSE current consumption during startup | IDD | 8.5 | mA | During startup | 76 | ||
| Accuracy of the HSI oscillator | ACCHSI | -2.8 | 3.8 | % | TA = -40 to 105°C | 79 | |
| Accuracy of the HSI oscillator (factory calibrated) | ACCHSI | -1 | 1 | % | TA = 25°C; factory calibrated, parts not soldered | 79 | |
| 16-bit programming time | tprog | 40 | 53.5 | 60 | µs | TA = -40 to +105 °C | 81 |
| Page (2 KB) erase time | tERASE | 20 | 40 | ms | TA = -40 to +105 °C | 81 | |
| Supply current in write mode | IDD | 10 | mA | Write mode | 81 | ||
| Endurance | NEND | 10 | kcycles | TA = -40 to +85 °C (6 suffix versions) | 81 | ||
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 2000 | V | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001 | 83 | ||
| Weak pull-up equivalent resistor (NRST) | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 91 |
CAD (KiCad official)
- Symbol:
STM32F302VCT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f302vct6-etched.step/stm32f302vct6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f302vct6.step/stm32f302vct6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (145 pp, sha256
10a072d58aca58c4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32F302VCT6
**STMicroelectronics** · ST Microelectronics · LQFP-100(14x14)
STM32F302VCT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACECK, TIM3_CH1, TSC_G7_IO1, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACED0, TIM3_CH2, TSC_G7_IO2, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACED1, TIM3_CH3, TSC_G7_IO3, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TRACED2, TIM3_CH4, TSC_G7_IO4, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate function TRACED3, EVENTOUT; additional functions WKUP3, RTC_TAMP3. |
| 6 | VBAT | power_in | Backup power supply. |
| 7 | PC13 | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch, limited to 3 mA sink: output speed must not exceed 2 MHz with 30 pF maximum load and it must not be used as a current source; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT; alternate function TIM1_CH1N. |
| 8 | PC14/OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch with the same output limits as PC13 (maximum 2 MHz at 30 pF, no current-source use); additional function OSC32_IN. |
| 9 | PC15/OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch with the same output limits as PC13 (maximum 2 MHz at 30 pF, no current-source use); additional function OSC32_OUT. |
| 10 | PF9 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM15_CH1, SPI2_SCK, EVENTOUT. |
| 11 | PF10 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM15_CH2, SPI2_SCK, EVENTOUT. |
| 12 | PF0/OSC_IN | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions TIM1_CH3N, I2C2_SDA; additional function OSC_IN. |
| 13 | PF1/OSC_OUT | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate function I2C2_SCL; additional function OSC_OUT. |
| 14 | NRST | bidirectional | Device reset input / internal reset output (active low), bidirectional with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN6. |
| 16 | PC1 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN7. |
| 17 | PC2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN8. |
| 18 | PC3 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_BKIN2, EVENTOUT; additional function ADC12_IN9. |
| 19 | PF2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate function EVENTOUT; additional function ADC12_IN10. |
| 20 | VSSA/VREF- | power_in | Analog ground / negative reference voltage. |
| 21 | VREF+ | power_in | Positive reference voltage; VREF+ functionality is available only on the 100-pin package. |
| 22 | VDDA | power_in | Analog power supply. |
| 23 | PA0 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, COMP1_OUT, EVENTOUT; additional functions ADC1_IN1, COMP1_INM, RTC_TAMP2, WKUP1. |
| 24 | PA1 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2, TIM15_CH1N, RTC_REFIN, EVENTOUT; additional functions ADC1_IN2, COMP1_INP, OPAMP1_VINP. |
| 25 | PA2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, COMP2_OUT, EVENTOUT; additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT. |
| 26 | PA3 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, EVENTOUT; additional functions ADC1_IN4, OPAMP1_VINP, COMP2_INP, OPAMP1_VINM. |
| 27 | PF4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions COMP1_OUT, EVENTOUT; additional function ADC1_IN5. |
| 28 | VDD | power_in | Digital power supply. |
| 29 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI1_NSS, SPI3_NSS, I2S3_WS, USART2_CK, TSC_G2_IO1, TIM3_CH2, EVENTOUT; additional functions ADC2_IN1, DAC1_OUT1, COMP1_INM, COMP2_INM, COMP4_INM, COMP6_INM. |
| 30 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2, EVENTOUT; additional functions ADC2_IN2, OPAMP1_VINP, OPAMP2_VINM, COMP1_INM, COMP2_INM, COMP4_INM, COMP6_INM. |
| 31 | PA6 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT; additional functions ADC2_IN3, OPAMP2_VOUT. |
| 32 | PA7 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N, TSC_G2_IO4, COMP2_OUT, EVENTOUT; additional functions ADC2_IN4, COMP2_INP, OPAMP2_VINP, OPAMP1_VINP. |
| 33 | PC4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions USART1_TX, EVENTOUT; additional function ADC2_IN5. |
| 34 | PC5 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART1_RX, TSC_G3_IO1, EVENTOUT; additional functions ADC2_IN11, OPAMP2_VINM, OPAMP1_VINM. |
| 35 | PB0 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT; additional functions COMP4_INP, OPAMP2_VINP. |
| 36 | PB1 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions TIM3_CH4, TIM1_CH3N, COMP4_OUT, TSC_G3_IO3, EVENTOUT. |
| 37 | PB2 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions TSC_G3_IO4, EVENTOUT; additional functions ADC2_IN12, COMP4_INM. |
| 38 | PE7 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_ETR, EVENTOUT; additional function COMP4_INP. |
| 39 | PE8 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH1N, EVENTOUT; additional function COMP4_INM. |
| 40 | PE9 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions TIM1_CH1, EVENTOUT. |
| 41 | PE10 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH2N, EVENTOUT. |
| 42 | PE11 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH2, EVENTOUT. |
| 43 | PE12 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH3N, EVENTOUT. |
| 44 | PE13 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM1_CH3, EVENTOUT. |
| 45 | PE14 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions TIM1_CH4, TIM1_BKIN2, EVENTOUT. |
| 46 | PE15 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa, function availability depends on device); alternate functions USART3_RX, TIM1_BKIN, EVENTOUT. |
| 47 | PB10 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions USART3_TX, TIM2_CH3, TSC_SYNC, EVENTOUT. |
| 48 | PB11 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions USART3_RX, TIM2_CH4, TSC_G6_IO1, EVENTOUT; additional function COMP6_INP. |
| 49 | VSS | power_in | Digital ground. |
| 50 | VDD | power_in | Digital power supply. |
| 51 | PB12 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel with reduced touch sensitivity (TTa); alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, TSC_G6_IO2, EVENTOUT. |
| 52 | PB13 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, TSC_G6_IO3, EVENTOUT. |
| 53 | PB14 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI2_MISO, I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4, EVENTOUT; additional function OPAMP2_VINP. |
| 54 | PB15 | bidirectional | 3.3 V tolerant I/O directly connected to ADC, fast ADC channel (TTa); alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N, TIM15_CH2, EVENTOUT; additional function COMP6_INM. |
| 55 | PD8 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_TX, EVENTOUT. |
| 56 | PD9 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_RX, EVENTOUT. |
| 57 | PD10 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_CK, EVENTOUT; additional function COMP6_INM. |
| 58 | PD11 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_CTS, EVENTOUT; additional function COMP6_INP. |
| 59 | PD12 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions USART3_RTS_DE, TIM4_CH1, TSC_G8_IO1, EVENTOUT. |
| 60 | PD13 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM4_CH2, TSC_G8_IO2, EVENTOUT. |
| 61 | PD14 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions TIM4_CH3, TSC_G8_IO3, EVENTOUT; additional function OPAMP2_VINP. |
| 62 | PD15 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa, function availability depends on device); alternate functions SPI2_NSS, TIM4_CH4, TSC_G8_IO4, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions I2S2_MCK, COMP6_OUT, TIM3_CH1, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions I2S3_MCK, TIM3_CH2, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM3_CH3, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions TIM3_CH4, I2S_CKIN, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V tolerant I/O (FT); alternate functions I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1, TIM4_ETR, MCO, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN, TSC_G4_IO1, EVENTOUT. |
| 69 | PA10 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM17_BKIN, TSC_G4_IO2, COMP6_OUT, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V tolerant I/O (FT); alternate functions USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1, COMP1_OUT, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V tolerant I/O (FT); alternate functions USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1, COMP2_OUT, EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V tolerant I/O (FT); alternate functions USART3_CTS, TIM4_CH3, TIM16_CH1N, TSC_G4_IO3, IR_OUT, SWDIO-JTMS, EVENTOUT. |
| 73 | PF6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf, function availability depends on device); alternate functions I2C2_SCL, USART3_RTS_DE, TIM4_CH4, EVENTOUT. |
| 74 | VSS | power_in | Ground. |
| 75 | VDD | power_in | Digital power supply. |
| 76 | PA14 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, USART2_TX, TIM1_BKIN, TSC_G4_IO4, SWCLK-JTCK, EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, SPI1_NSS, SPI3_NSS, I2S3_WS, JTDI, USART2_RX, TIM1_BKIN, TIM2_CH1_ETR, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions SPI3_SCK, I2S3_CK, USART3_TX, UART4_TX, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions SPI3_MISO, I2S3ext_SD, USART3_RX, UART4_RX, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions SPI3_MOSI, I2S3_SD, USART3_CK, UART5_TX, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate function CAN_RX, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate function CAN_TX, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions UART5_RX, TIM3_ETR, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_CTS, TIM2_CH1_ETR, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_RTS_DE, TIM2_CH2, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_TX, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_RX, TIM2_CH4, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART2_CK, TIM2_CH3, EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V tolerant I/O (FT); alternate functions SPI3_SCK, I2S3_CK, SPI1_SCK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR, TSC_G5_IO1, JTDO-TRACESWO, EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V tolerant I/O (FT); alternate functions SPI3_MISO, I2S3ext_SD, SPI1_MISO, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN, TSC_G5_IO2, NJTRST, EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V tolerant I/O (FT); alternate functions SPI3_MOSI, SPI1_MOSI, I2S3_SD, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2, TIM17_CH1, EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1, TSC_G5_IO3, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N, TSC_G5_IO4, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin used for boot memory selection. |
| 95 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM1_BKIN, TSC_SYNC, COMP1_OUT, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf); alternate functions I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, IR_OUT, COMP2_OUT, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART1_TX, TIM4_ETR, TIM16_CH1, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V tolerant I/O (FT, function availability depends on device); alternate functions USART1_RX, TIM17_CH1, EVENTOUT. |
| 99 | VSS | power_in | Ground. |
| 100 | VDD | power_in | Digital power supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VBAT and VDD) | VDD-VSS | -0.3 | | 4 | V | | 57 |
| Allowed voltage difference for VDD > VDDA | VDD-VDDA | | | 0.4 | V | VDD > VDDA | 57 |
| Allowed voltage difference for VREF+ > VDDA | VREF+-VDDA | | | 0.4 | V | VREF+ > VDDA | 57 |
| Input voltage on TTa pins | VIN | | | 4 | V | | 57 |
| Input voltage on any other pin | VIN | | | 4 | V | | 57 |
| Input voltage on Boot0 pin | VIN | 0 | | 9 | V | | 57 |
| Variations between different VDD power pins | /ΔVDDx/ | | | 50 | mV | | 57 |
| Variations between all the different ground pins (includes VREF-) | /VSSX −VSS/ | | | 50 | mV | | 57 |
| Total current into sum of all VDD power lines (source) | ΣIVDD | | | 160 | mA | | 58 |
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | | | -160 | mA | | 58 |
| Maximum current into each VDD power line (source) | IVDD | | | 100 | mA | | 58 |
| Maximum current out of each VSS ground line (sink) | IVSS | | | -100 | mA | | 58 |
| Output current sunk by any I/O and control pin | IIO(PIN) | | | 25 | mA | | 58 |
| Output current source by any I/O and control pin | IIO(PIN) | | | -25 | mA | | 58 |
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | | | 80 | mA | | 58 |
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | | | -80 | mA | | 58 |
| Injected current on FT, FTf and B pins | IINJ(PIN) | -5 | | 0 | mA | | 58 |
| Injected current on TC and RST pin | IINJ(PIN) | -5 | | 5 | mA | | 58 |
| Injected current on TTa pins | IINJ(PIN) | -5 | | 5 | mA | | 58 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 58 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 58 |
| Maximum junction temperature | TJ | | | 150 | °C | | 58 |
| Internal AHB clock frequency | fHCLK | 0 | | 72 | MHz | | 59 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 36 | MHz | | 59 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 72 | MHz | | 59 |
| Standard operating voltage | VDD | 2 | | 3.6 | V | | 59 |
| Analog operating voltage | VDDA | 2 | | 3.6 | V | OPAMP and DAC not used; must be equal to or higher than VDD | 59 |
| Analog operating voltage | VDDA | 2.4 | | 3.6 | V | OPAMP and DAC used | 59 |
| Backup operating voltage | VBAT | 1.65 | | 3.6 | V | | 59 |
| I/O input voltage (TC I/O) | VIN | -0.3 | | | V | | 59 |
| I/O input voltage (TTa I/O) | VIN | -0.3 | | | V | | 59 |
| I/O input voltage (FT and FTf I/O) | VIN | -0.3 | | 5.5 | V | | 59 |
| I/O input voltage (BOOT0) | VIN | 0 | | 5.5 | V | | 59 |
| Power dissipation (LQFP100) | PD | | | 488 | mW | TA = 85 °C for suffix 6 | 59 |
| Ambient temperature for 6 suffix version | TA | -40 | | 85 | °C | Maximum power dissipation | 59 |
| Ambient temperature for 6 suffix version | TA | -40 | | 105 | °C | Low-power dissipation | 59 |
| Junction temperature range (6 suffix version) | TJ | -40 | | 105 | °C | | 59 |
| Power on/power down reset threshold | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 60 |
| Power on/power down reset threshold | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 60 |
| POR reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | | 60 |
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.25 | V | -40 °C < TA < +105 °C | 62 |
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.24 | V | -40 °C < TA < +85 °C | 62 |
| Internal reference voltage spread over the temperature range | VRERINT | | | 10 | mV | VDD = 3 V ±10 mV | 62 |
| Internal reference voltage temperature coefficient | TCoeff | | | 100 | ppm/°C | | 62 |
| Supply current in Run mode, executing from Flash (HSE bypass) | IDD | | 61.2 | 68.5 | mA | fHCLK 72 MHz; all peripherals enabled; VDD = 3.6 V; max at TA = 105 °C | 63 |
| Supply current in Run mode, executing from RAM (HSE bypass) | IDD | | 60.8 | 70.4 | mA | fHCLK 72 MHz; all peripherals enabled; VDD = 3.6 V; max at TA = 105 °C | 63 |
| Supply current in Sleep mode, executing from Flash or RAM (HSE bypass) | IDD | | 44 | 50.5 | mA | fHCLK 72 MHz; all peripherals enabled; VDD = 3.6 V; max at TA = 105 °C | 64 |
| Supply current in Stop mode (regulator in run mode, all oscillators OFF) | IDD | | 20.8 | 735 | µA | VDD = 3.6 V; max at TA = 105 °C | 65 |
| Supply current in Stop mode (regulator in low-power mode, all oscillators OFF) | IDD | | 8.33 | 720 | µA | VDD = 3.6 V; max at TA = 105 °C | 65 |
| Supply current in Standby mode (LSI OFF and IWDG OFF) | IDD | | 1.11 | 13.3 | µA | VDD = 3.6 V; max at TA = 105 °C | 65 |
| Oscillator frequency (HSE) | fOSC_IN | 4 | 8 | 32 | MHz | | 76 |
| HSE current consumption during startup | IDD | | | 8.5 | mA | During startup | 76 |
| Accuracy of the HSI oscillator | ACCHSI | -2.8 | | 3.8 | % | TA = -40 to 105°C | 79 |
| Accuracy of the HSI oscillator (factory calibrated) | ACCHSI | -1 | | 1 | % | TA = 25°C; factory calibrated, parts not soldered | 79 |
| 16-bit programming time | tprog | 40 | 53.5 | 60 | µs | TA = -40 to +105 °C | 81 |
| Page (2 KB) erase time | tERASE | 20 | | 40 | ms | TA = -40 to +105 °C | 81 |
| Supply current in write mode | IDD | | | 10 | mA | Write mode | 81 |
| Endurance | NEND | 10 | | | kcycles | TA = -40 to +85 °C (6 suffix versions) | 81 |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | | | 2000 | V | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001 | 83 |
| Weak pull-up equivalent resistor (NRST) | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 91 |
## CAD (KiCad official)
- Symbol: `STM32F302VCT6`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32f302vct6-etched.step` / `stm32f302vct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f302vct6.step` / `stm32f302vct6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/content/ccc/resource/technical/document/datasheet/67/73/21/b9/f2/b3/4d/f8/DM00094064.pdf/files/DM00094064.pdf/jcr:content/translations/en.DM00094064.pdf) (145 pp, sha256 `10a072d58aca58c4`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32f302vct6-datasheet.pdf)