component
STM32F207IGT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-176(24x24). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F207IGT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)
STM32F207IGT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TRACED0, FSMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT. |
| 6 | VBAT | power_in | Backup supply pin for RTC, backup registers and optional backup SRAM. |
| 7 | PI8 | bidirectional | FT I/O supplied through the power switch (3 mA sink limit; output speed max 2 MHz, 30 pF load, not a current source); EVENTOUT, additional function RTC_AF2. |
| 8 | PC13 | bidirectional | FT I/O supplied through the power switch (3 mA sink limit; output speed max 2 MHz, 30 pF load); EVENTOUT, additional function RTC_AF1. |
| 9 | PC14-OSC32_IN | bidirectional | FT I/O supplied through the power switch (3 mA limit, max 2 MHz, 30 pF); 32 kHz oscillator input OSC32_IN; not 5 V tolerant in oscillator mode. |
| 10 | PC15-OSC32_OUT | bidirectional | FT I/O supplied through the power switch (3 mA limit, max 2 MHz, 30 pF); 32 kHz oscillator output OSC32_OUT; not 5 V tolerant in oscillator mode. |
| 11 | PI9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions CAN1_RX, EVENTOUT. |
| 12 | PI10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions ETH_MII_RX_ER, EVENTOUT. |
| 13 | PI11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions OTG_HS_ULPI_DIR, EVENTOUT. |
| 14 | VSS | power_in | Ground supply pin. |
| 15 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 16 | PF0 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A0, I2C2_SDA, EVENTOUT. |
| 17 | PF1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A1, I2C2_SCL, EVENTOUT. |
| 18 | PF2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A2, I2C2_SMBA, EVENTOUT. |
| 19 | PF3 | bidirectional | FT I/O (5 V tolerant except in analog mode); FSMC_A3, EVENTOUT, additional function ADC3_IN9. |
| 20 | PF4 | bidirectional | FT I/O (5 V tolerant except in analog mode); FSMC_A4, EVENTOUT, additional function ADC3_IN14. |
| 21 | PF5 | bidirectional | FT I/O (5 V tolerant except in analog mode); FSMC_A5, EVENTOUT, additional function ADC3_IN15. |
| 22 | VSS | power_in | Ground supply pin. |
| 23 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 24 | PF6 | bidirectional | FT I/O (5 V tolerant except in analog mode); TIM10_CH1, FSMC_NIORD, EVENTOUT, additional function ADC3_IN4. |
| 25 | PF7 | bidirectional | FT I/O (5 V tolerant except in analog mode); TIM11_CH1, FSMC_NREG, EVENTOUT, additional function ADC3_IN5. |
| 26 | PF8 | bidirectional | FT I/O (5 V tolerant except in analog mode); TIM13_CH1, FSMC_NIOWR, EVENTOUT, additional function ADC3_IN6. |
| 27 | PF9 | bidirectional | FT I/O (5 V tolerant except in analog mode); TIM14_CH1, FSMC_CD, EVENTOUT, additional function ADC3_IN7. |
| 28 | PF10 | bidirectional | FT I/O (5 V tolerant except in analog mode); FSMC_INTR, EVENTOUT, additional function ADC3_IN8. |
| 29 | PH0-OSC_IN | bidirectional | FT I/O (not 5 V tolerant in oscillator mode); EVENTOUT, additional function OSC_IN for the 4 to 26 MHz crystal oscillator. |
| 30 | PH1-OSC_OUT | bidirectional | FT I/O (not 5 V tolerant in oscillator mode); EVENTOUT, additional function OSC_OUT for the 4 to 26 MHz crystal oscillator. |
| 31 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 32 | PC0 | bidirectional | FT I/O (5 V tolerant except in analog mode); OTG_HS_ULPI_STP, EVENTOUT, additional function ADC123_IN10. |
| 33 | PC1 | bidirectional | FT I/O (5 V tolerant except in analog mode); ETH_MDC, EVENTOUT, additional function ADC123_IN11. |
| 34 | PC2 | bidirectional | FT I/O (5 V tolerant except in analog mode); SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, EVENTOUT, additional function ADC123_IN12. |
| 35 | PC3 | bidirectional | FT I/O (5 V tolerant except in analog mode); SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT, additional function ADC123_IN13. |
| 36 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 37 | VSSA | power_in | Analog ground supply pin. |
| 38 | VREF+ | power_in | Positive reference voltage supply for the ADCs and DACs. |
| 39 | VDDA | power_in | Analog supply pin for ADC, DAC and related analog blocks. |
| 40 | PA0-WKUP | bidirectional | FT I/O (5 V tolerant except in analog mode); USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT, additional functions ADC123_IN0 and WKUP. |
| 41 | PA1 | bidirectional | FT I/O (5 V tolerant except in analog mode); USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT, additional function ADC123_IN1. |
| 42 | PA2 | bidirectional | FT I/O (5 V tolerant except in analog mode); USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT, additional function ADC123_IN2. |
| 43 | PH2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions ETH_MII_CRS, EVENTOUT. |
| 44 | PH3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions ETH_MII_COL, EVENTOUT. |
| 45 | PH4 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C2_SCL, OTG_HS_ULPI_NXT, EVENTOUT. |
| 46 | PH5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C2_SDA, EVENTOUT. |
| 47 | PA3 | bidirectional | FT I/O (5 V tolerant except in analog mode); USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT, additional function ADC123_IN3. |
| 48 | VSS | power_in | Ground supply pin. |
| 49 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 50 | PA4 | bidirectional | 3.3 V tolerant (TTa) I/O; SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT, additional functions ADC12_IN4 and DAC_OUT1. |
| 51 | PA5 | bidirectional | 3.3 V tolerant (TTa) I/O; SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT, additional functions ADC12_IN5 and DAC_OUT2. |
| 52 | PA6 | bidirectional | FT I/O (5 V tolerant except in analog mode); SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT, additional function ADC12_IN6. |
| 53 | PA7 | bidirectional | FT I/O (5 V tolerant except in analog mode); SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT, additional function ADC12_IN7. |
| 54 | PC4 | bidirectional | FT I/O (5 V tolerant except in analog mode); ETH_RMII_RXD0, ETH_MII_RXD0, EVENTOUT, additional function ADC12_IN14. |
| 55 | PC5 | bidirectional | FT I/O (5 V tolerant except in analog mode); ETH_RMII_RXD1, ETH_MII_RXD1, EVENTOUT, additional function ADC12_IN15. |
| 56 | PB0 | bidirectional | FT I/O (5 V tolerant except in analog mode); TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT, additional function ADC12_IN8. |
| 57 | PB1 | bidirectional | FT I/O (5 V tolerant except in analog mode); TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT, additional function ADC12_IN9. |
| 58 | PB2-BOOT1 | bidirectional | 5 V tolerant (FT) I/O that also serves as BOOT1; function after reset is PB2, alternate function EVENTOUT. |
| 59 | PF11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions DCMI_D12, EVENTOUT. |
| 60 | PF12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A6, EVENTOUT. |
| 61 | VSS | power_in | Ground supply pin. |
| 62 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 63 | PF13 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A7, EVENTOUT. |
| 64 | PF14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A8, EVENTOUT. |
| 65 | PF15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A9, EVENTOUT. |
| 66 | PG0 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A10, EVENTOUT. |
| 67 | PG1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_A11, EVENTOUT. |
| 68 | PE7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D4, TIM1_ETR, EVENTOUT. |
| 69 | PE8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT. |
| 70 | PE9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D6, TIM1_CH1, EVENTOUT. |
| 71 | VSS | power_in | Ground supply pin. |
| 72 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 73 | PE10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT. |
| 74 | PE11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D8, TIM1_CH2, EVENTOUT. |
| 75 | PE12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT. |
| 76 | PE13 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D10, TIM1_CH3, EVENTOUT. |
| 77 | PE14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D11, TIM1_CH4, EVENTOUT. |
| 78 | PE15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT. |
| 79 | PB10 | bidirectional | 5 V tolerant (FT) I/O; SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT. |
| 80 | PB11 | bidirectional | 5 V tolerant (FT) I/O; I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, EVENTOUT. |
| 81 | VCAP_1 | passive | Connection for the external capacitor of the internal 1.2 V regulator (2.2 µF per datasheet power supply scheme). |
| 82 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 83 | PH6 | bidirectional | 5 V tolerant (FT) I/O; I2C2_SMBA, TIM12_CH1, ETH_MII_RXD2, EVENTOUT. |
| 84 | PH7 | bidirectional | 5 V tolerant (FT) I/O; I2C3_SCL, ETH_MII_RXD3, EVENTOUT. |
| 85 | PH8 | bidirectional | 5 V tolerant (FT) I/O; I2C3_SDA, DCMI_HSYNC, EVENTOUT. |
| 86 | PH9 | bidirectional | 5 V tolerant (FT) I/O; I2C3_SMBA, TIM12_CH2, DCMI_D0, EVENTOUT. |
| 87 | PH10 | bidirectional | 5 V tolerant (FT) I/O; TIM5_CH1, DCMI_D1, EVENTOUT. |
| 88 | PH11 | bidirectional | 5 V tolerant (FT) I/O; TIM5_CH2, DCMI_D2, EVENTOUT. |
| 89 | PH12 | bidirectional | 5 V tolerant (FT) I/O; TIM5_CH3, DCMI_D3, EVENTOUT. |
| 90 | VSS | power_in | Ground supply pin. |
| 91 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 92 | PB12 | bidirectional | 5 V tolerant (FT) I/O; SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT. |
| 93 | PB13 | bidirectional | 5 V tolerant (FT) I/O; SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT, additional function OTG_HS_VBUS. |
| 94 | PB14 | bidirectional | 5 V tolerant (FT) I/O; SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, EVENTOUT. |
| 95 | PB15 | bidirectional | 5 V tolerant (FT) I/O; SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, EVENTOUT. |
| 96 | PD8 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D13, USART3_TX, EVENTOUT. |
| 97 | PD9 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D14, USART3_RX, EVENTOUT. |
| 98 | PD10 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D15, USART3_CK, EVENTOUT. |
| 99 | PD11 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A16, USART3_CTS, EVENTOUT. |
| 100 | PD12 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT. |
| 101 | PD13 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A18, TIM4_CH2, EVENTOUT. |
| 102 | VSS | power_in | Ground supply pin. |
| 103 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 104 | PD14 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D0, TIM4_CH3, EVENTOUT. |
| 105 | PD15 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D1, TIM4_CH4, EVENTOUT. |
| 106 | PG2 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A12, EVENTOUT. |
| 107 | PG3 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A13, EVENTOUT. |
| 108 | PG4 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A14, EVENTOUT. |
| 109 | PG5 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A15, EVENTOUT. |
| 110 | PG6 | bidirectional | 5 V tolerant (FT) I/O; FSMC_INT2, EVENTOUT. |
| 111 | PG7 | bidirectional | 5 V tolerant (FT) I/O; FSMC_INT3, USART6_CK, EVENTOUT. |
| 112 | PG8 | bidirectional | 5 V tolerant (FT) I/O; USART6_RTS, ETH_PPS_OUT, EVENTOUT. |
| 113 | VSS | power_in | Ground supply pin. |
| 114 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 115 | PC6 | bidirectional | 5 V tolerant (FT) I/O; I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT. |
| 116 | PC7 | bidirectional | 5 V tolerant (FT) I/O; I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT. |
| 117 | PC8 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT. |
| 118 | PC9 | bidirectional | 5 V tolerant (FT) I/O; I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT. |
| 119 | PA8 | bidirectional | 5 V tolerant (FT) I/O; MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT. |
| 120 | PA9 | bidirectional | 5 V tolerant (FT) I/O; USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT, additional function OTG_FS_VBUS. |
| 121 | PA10 | bidirectional | 5 V tolerant (FT) I/O; USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT. |
| 122 | PA11 | bidirectional | 5 V tolerant (FT) I/O; USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |
| 123 | PA12 | bidirectional | 5 V tolerant (FT) I/O; USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |
| 124 | PA13 | bidirectional | 5 V tolerant (FT) I/O; JTMS-SWDIO function after reset, EVENTOUT. |
| 125 | VCAP_2 | passive | Connection for the external capacitor of the internal 1.2 V regulator (2.2 µF per datasheet power supply scheme). |
| 126 | VSS | power_in | Ground supply pin. |
| 127 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 128 | PH13 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH1N, CAN1_TX, EVENTOUT. |
| 129 | PH14 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH2N, DCMI_D4, EVENTOUT. |
| 130 | PH15 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH3N, DCMI_D11, EVENTOUT. |
| 131 | PI0 | bidirectional | 5 V tolerant (FT) I/O; TIM5_CH4, SPI2_NSS, I2S2_WS, DCMI_D13, EVENTOUT. |
| 132 | PI1 | bidirectional | 5 V tolerant (FT) I/O; SPI2_SCK, I2S2_SCK, DCMI_D8, EVENTOUT. |
| 133 | PI2 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH4, SPI2_MISO, DCMI_D9, EVENTOUT. |
| 134 | PI3 | bidirectional | 5 V tolerant (FT) I/O; TIM8_ETR, SPI2_MOSI, I2S2_SD, DCMI_D10, EVENTOUT. |
| 135 | VSS | power_in | Ground supply pin. |
| 136 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 137 | PA14 | bidirectional | 5 V tolerant (FT) I/O; JTCK-SWCLK function after reset, EVENTOUT. |
| 138 | PA15 | bidirectional | 5 V tolerant (FT) I/O; JTDI function after reset, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT. |
| 139 | PC10 | bidirectional | 5 V tolerant (FT) I/O; SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT. |
| 140 | PC11 | bidirectional | 5 V tolerant (FT) I/O; UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, EVENTOUT. |
| 141 | PC12 | bidirectional | 5 V tolerant (FT) I/O; UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT. |
| 142 | PD0 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D2, CAN1_RX, EVENTOUT. |
| 143 | PD1 | bidirectional | 5 V tolerant (FT) I/O; FSMC_D3, CAN1_TX, EVENTOUT. |
| 144 | PD2 | bidirectional | 5 V tolerant (FT) I/O; TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |
| 145 | PD3 | bidirectional | 5 V tolerant (FT) I/O; FSMC_CLK, USART2_CTS, EVENTOUT. |
| 146 | PD4 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NOE, USART2_RTS, EVENTOUT. |
| 147 | PD5 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NWE, USART2_TX, EVENTOUT. |
| 148 | VSS | power_in | Ground supply pin. |
| 149 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 150 | PD6 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NWAIT, USART2_RX, EVENTOUT. |
| 151 | PD7 | bidirectional | 5 V tolerant (FT) I/O; USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT. |
| 152 | PG9 | bidirectional | 5 V tolerant (FT) I/O; USART6_RX, FSMC_NE2, FSMC_NCE3, EVENTOUT. |
| 153 | PG10 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NCE4_1, FSMC_NE3, EVENTOUT. |
| 154 | PG11 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NCE4_2, ETH_MII_TX_EN, ETH_RMII_TX_EN, EVENTOUT. |
| 155 | PG12 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NE4, USART6_RTS, EVENTOUT. |
| 156 | PG13 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A24, USART6_CTS, ETH_MII_TXD0, ETH_RMII_TXD0, EVENTOUT. |
| 157 | PG14 | bidirectional | 5 V tolerant (FT) I/O; FSMC_A25, USART6_TX, ETH_MII_TXD1, ETH_RMII_TXD1, EVENTOUT. |
| 158 | VSS | power_in | Ground supply pin. |
| 159 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 160 | PG15 | bidirectional | 5 V tolerant (FT) I/O; USART6_CTS, DCMI_D13, EVENTOUT. |
| 161 | PB3 | bidirectional | 5 V tolerant (FT) I/O; JTDO/TRACESWO function after reset, SPI3_SCK, I2S3_SCK, TIM2_CH2, SPI1_SCK, EVENTOUT. |
| 162 | PB4 | bidirectional | 5 V tolerant (FT) I/O; NJTRST, SPI3_MISO, TIM3_CH1, SPI1_MISO, EVENTOUT. |
| 163 | PB5 | bidirectional | 5 V tolerant (FT) I/O; I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT. |
| 164 | PB6 | bidirectional | 5 V tolerant (FT) I/O; I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT. |
| 165 | PB7 | bidirectional | 5 V tolerant (FT) I/O; I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT. |
| 166 | BOOT0 | input | Dedicated boot mode selection input pin (B structure); additional function VPP. |
| 167 | PB8 | bidirectional | 5 V tolerant (FT) I/O; TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT. |
| 168 | PB9 | bidirectional | 5 V tolerant (FT) I/O; SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT. |
| 169 | PE0 | bidirectional | 5 V tolerant (FT) I/O; TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT. |
| 170 | PE1 | bidirectional | 5 V tolerant (FT) I/O; FSMC_NBL1, DCMI_D3, EVENTOUT. |
| 171 | RFU | unconnected | Reserved for future use; can be tied to VDD, VSS or left unconnected. |
| 172 | VDD | power_in | Digital supply pin (1.8 to 3.6 V application supply). |
| 173 | PI4 | bidirectional | 5 V tolerant (FT) I/O; TIM8_BKIN, DCMI_D5, EVENTOUT. |
| 174 | PI5 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH1, DCMI_VSYNC, EVENTOUT. |
| 175 | PI6 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH2, DCMI_D6, EVENTOUT. |
| 176 | PI7 | bidirectional | 5 V tolerant (FT) I/O; TIM8_CH3, DCMI_D7, EVENTOUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-176(24x24) |
| Category | Embedded Processors & Controllers |
| Pins | 176 |
CAD (KiCad official)
- Symbol:
STM32F207IGT6 - Footprint:
Package_QFP:LQFP-176_24x24mm_P0.5mm - 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
- 3D model files:
stm32f207igt6-etched.step/stm32f207igt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f207igt6.step/stm32f207igt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (183 pp, sha256
eb92b827c34736d3, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).