main
Ray
Publish 0.1.0
d8f5b63
STM32F205ZCT7
STMicroelectronics · ST Microelectronics · LQFP-144(20x20)
STM32F205ZCT7 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED0, FSMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED1, FSMC_A20 and DCMI_D4. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED2, FSMC_A21, TIM9_CH1 and DCMI_D6. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED3, FSMC_A22, TIM9_CH2 and DCMI_D7. |
| 6 | VBAT | power_in | Backup supply for the RTC, backup registers and optional backup SRAM. |
| 7 | PC13 | bidirectional | 5 V tolerant I/O (FT) supplied through the power switch, which sinks at most 3 mA, so output speed must not exceed 2 MHz with 30 pF load and it must not source LED current; additional function RTC_AF1. |
| 8 | PC14/OSC32_IN | bidirectional | I/O supplied through the power switch (3 mA sink limit, 2 MHz max output speed with 30 pF load); serves as OSC32_IN for the 32 kHz oscillator. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O supplied through the power switch (3 mA sink limit, 2 MHz max output speed with 30 pF load); serves as OSC32_OUT for the 32 kHz oscillator. |
| 10 | PF0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A0, I2C2_SDA and EVENTOUT. |
| 11 | PF1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A1, I2C2_SCL and EVENTOUT. |
| 12 | PF2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A2, I2C2_SMBA and EVENTOUT. |
| 13 | PF3 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_A3 and analog input ADC3_IN9. |
| 14 | PF4 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_A4 and analog input ADC3_IN14. |
| 15 | PF5 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_A5 and analog input ADC3_IN15. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 18 | PF6 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM10_CH1, FSMC_NIORD and analog input ADC3_IN4. |
| 19 | PF7 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM11_CH1, FSMC_NREG and analog input ADC3_IN5. |
| 20 | PF8 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM13_CH1, FSMC_NIOWR and analog input ADC3_IN6. |
| 21 | PF9 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM14_CH1, FSMC_CD and analog input ADC3_IN7. |
| 22 | PF10 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_INTR and analog input ADC3_IN8. |
| 23 | PH0/OSC_IN | bidirectional | 5 V tolerant I/O (FT, except in oscillator mode) that serves as OSC_IN for the 4 to 26 MHz oscillator. |
| 24 | PH1/OSC_OUT | bidirectional | 5 V tolerant I/O (FT, except in oscillator mode) that serves as OSC_OUT for the 4 to 26 MHz oscillator. |
| 25 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 26 | PC0 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function OTG_HS_ULPI_STP and analog input ADC123_IN10. |
| 27 | PC1 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function ETH_MDC and analog input ADC123_IN11. |
| 28 | PC2 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2 and analog input ADC123_IN12. |
| 29 | PC3 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK and analog input ADC123_IN13. |
| 30 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 31 | VSSA | power_in | Analog ground pin. |
| 32 | VREF+ | power_in | Positive reference voltage input for the ADC. |
| 33 | VDDA | power_in | Analog supply pin. |
| 34 | PA0-WKUP | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with WKUP wake-up function, alternate functions USART2_CTS, UART4_TX, TIM2_CH1_ETR and TIM5_CH1, and analog input ADC123_IN0. |
| 35 | PA1 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions USART2_RTS, UART4_RX, TIM5_CH2 and analog input ADC123_IN1. |
| 36 | PA2 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1 and ETH_MDIO, and analog input ADC123_IN2. |
| 37 | PA3 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions USART2_RX, TIM5_CH4, OTG_HS_ULPI_D0 and ETH_MII_COL, and analog input ADC123_IN3. |
| 38 | VSS | power_in | Ground pin. |
| 39 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 40 | PA4 | bidirectional | 3.3 V tolerant I/O (TTa, except in analog mode) with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC and OTG_HS_SOF, plus analog input ADC12_IN4 and DAC_OUT1. |
| 41 | PA5 | bidirectional | 3.3 V tolerant I/O (TTa, except in analog mode) with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR and TIM8_CH1N, plus analog input ADC12_IN5 and DAC_OUT2. |
| 42 | PA6 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1 and DCMI_PIXCLK, and analog input ADC12_IN6. |
| 43 | PA7 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1 and ETH_MII_RX_DV, and analog input ADC12_IN7. |
| 44 | PC4 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions ETH_RMII_RXD0 and ETH_MII_RXD0, and analog input ADC12_IN14. |
| 45 | PC5 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions ETH_RMII_RXD1 and ETH_MII_RXD1, and analog input ADC12_IN15. |
| 46 | PB0 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1 and ETH_MII_RXD2, and analog input ADC12_IN8. |
| 47 | PB1 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2 and ETH_MII_RXD3, and analog input ADC12_IN9. |
| 48 | PB2/BOOT1 | bidirectional | 5 V tolerant I/O (FT) that also functions as BOOT1, with EVENTOUT. |
| 49 | PF11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions DCMI_D12 and EVENTOUT. |
| 50 | PF12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A6 and EVENTOUT. |
| 51 | VSS | power_in | Ground pin. |
| 52 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 53 | PF13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A7 and EVENTOUT. |
| 54 | PF14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A8 and EVENTOUT. |
| 55 | PF15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A9 and EVENTOUT. |
| 56 | PG0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A10 and EVENTOUT. |
| 57 | PG1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A11 and EVENTOUT. |
| 58 | PE7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D4, TIM1_ETR and EVENTOUT. |
| 59 | PE8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D5, TIM1_CH1N and EVENTOUT. |
| 60 | PE9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D6, TIM1_CH1 and EVENTOUT. |
| 61 | VSS | power_in | Ground pin. |
| 62 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 63 | PE10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D7, TIM1_CH2N and EVENTOUT. |
| 64 | PE11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D8, TIM1_CH2 and EVENTOUT. |
| 65 | PE12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D9, TIM1_CH3N and EVENTOUT. |
| 66 | PE13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D10, TIM1_CH3 and EVENTOUT. |
| 67 | PE14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D11, TIM1_CH4 and EVENTOUT. |
| 68 | PE15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D12, TIM1_BKIN and EVENTOUT. |
| 69 | PB10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER and TIM2_CH3. |
| 70 | PB11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, ETH_RMII_TX_EN and TIM2_CH4. |
| 71 | VCAP_1 | power_in | Regulator decoupling pin to be connected to an external capacitor as specified in Section 6.3.2. |
| 72 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 73 | PB12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID. |
| 74 | PB13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX and OTG_HS_ULPI_D6. |
| 75 | PB14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1 and OTG_HS_DM. |
| 76 | PB15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM12_CH2, OTG_HS_DP and RTC_50Hz. |
| 77 | PD8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D13, USART3_TX and EVENTOUT. |
| 78 | PD9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D14, USART3_RX and EVENTOUT. |
| 79 | PD10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D15, USART3_CK and EVENTOUT. |
| 80 | PD11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A16, USART3_CTS and EVENTOUT. |
| 81 | PD12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A17, TIM4_CH1, USART3_RTS and EVENTOUT. |
| 82 | PD13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A18, TIM4_CH2 and EVENTOUT. |
| 83 | VSS | power_in | Ground pin. |
| 84 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 85 | PD14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D0, TIM4_CH3 and EVENTOUT. |
| 86 | PD15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D1, TIM4_CH4 and EVENTOUT. |
| 87 | PG2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A12 and EVENTOUT. |
| 88 | PG3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A13 and EVENTOUT. |
| 89 | PG4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A14 and EVENTOUT. |
| 90 | PG5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A15 and EVENTOUT. |
| 91 | PG6 | bidirectional | 5 V tolerant I/O (FT) with alternate function FSMC_INT2 and EVENTOUT. |
| 92 | PG7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_INT3, USART6_CK and EVENTOUT. |
| 93 | PG8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART6_RTS, ETH_PPS_OUT and EVENTOUT. |
| 94 | VSS | power_in | Ground pin. |
| 95 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 96 | PC6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0 and TIM3_CH1. |
| 97 | PC7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1 and TIM3_CH2. |
| 98 | PC8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK and DCMI_D2. |
| 99 | PC9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3 and TIM3_CH4. |
| 100 | PA8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL and OTG_FS_SOF. |
| 101 | PA9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA and DCMI_D0; additional function OTG_FS_VBUS. |
| 102 | PA10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID and DCMI_D1. |
| 103 | PA11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4 and OTG_FS_DM. |
| 104 | PA12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR and OTG_FS_DP. |
| 105 | PA13 | bidirectional | 5 V tolerant I/O (FT) that is the JTMS-SWDIO debug pin. |
| 106 | VCAP_2 | power_in | Regulator decoupling pin to be connected to an external capacitor as specified in Section 6.3.2. |
| 107 | VSS | power_in | Ground pin. |
| 108 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 109 | PA14 | bidirectional | 5 V tolerant I/O (FT) that is the JTCK-SWCLK debug pin. |
| 110 | PA15 | bidirectional | 5 V tolerant I/O (FT) with JTDI function and alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR and SPI1_NSS. |
| 111 | PC10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8 and USART3_TX. |
| 112 | PC11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4 and USART3_RX. |
| 113 | PC12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD and USART3_CK. |
| 114 | PD0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D2 and CAN1_RX. |
| 115 | PD1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D3 and CAN1_TX. |
| 116 | PD2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD and DCMI_D11. |
| 117 | PD3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_CLK and USART2_CTS. |
| 118 | PD4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NOE and USART2_RTS. |
| 119 | PD5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NWE and USART2_TX. |
| 120 | VSS | power_in | Ground pin. |
| 121 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 122 | PD6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NWAIT and USART2_RX. |
| 123 | PD7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART2_CK, FSMC_NE1 and FSMC_NCE2. |
| 124 | PG9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART6_RX, FSMC_NE2 and FSMC_NCE3. |
| 125 | PG10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NCE4_1 and FSMC_NE3. |
| 126 | PG11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NCE4_2, ETH_MII_TX_EN and ETH_RMII_TX_EN. |
| 127 | PG12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NE4 and USART6_RTS. |
| 128 | PG13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A24, USART6_CTS, ETH_MII_TXD0 and ETH_RMII_TXD0. |
| 129 | PG14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A25, USART6_TX, ETH_MII_TXD1 and ETH_RMII_TXD1. |
| 130 | VSS | power_in | Ground pin. |
| 131 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 132 | PG15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART6_CTS and DCMI_D13. |
| 133 | PB3 | bidirectional | 5 V tolerant I/O (FT) that carries the JTDO/TRACESWO debug function, with alternate functions SPI3_SCK, I2S3_SCK, TIM2_CH2 and SPI1_SCK. |
| 134 | PB4 | bidirectional | 5 V tolerant I/O (FT) that carries the NJTRST debug function, with alternate functions SPI3_MISO, TIM3_CH1 and SPI1_MISO. |
| 135 | PB5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10 and I2S3_SD. |
| 136 | PB6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5 and USART1_TX. |
| 137 | PB7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX and TIM4_CH2. |
| 138 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input, also listed with VPP function. |
| 139 | PB8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL and CAN1_RX. |
| 140 | PB9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA and CAN1_TX. |
| 141 | PE0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM4_ETR, FSMC_NBL0 and DCMI_D2. |
| 142 | PE1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NBL1 and DCMI_D3. |
| 143 | RFU | unconnected | Reserved for future use; can be tied to VDD, VSS or left unconnected. |
| 144 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD) | VDD-VSS | -0.3 | 4 | V | 69 | ||
| Total current into VDD power lines (source) | IVDD | 120 | mA | 70 | |||
| Total current out of VSS ground lines (sink) | IVSS | 120 | mA | 70 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | Output current sunk by any I/O and control pin | 70 | ||
| Output current source by any I/Os and control pin | IIO | 25 | mA | Output current source by any I/Os and control pin | 70 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 70 | ||
| Maximum junction temperature | TJ | 125 | °C | 70 | |||
| Internal AHB clock frequency | fHCLK | 0 | 120 | MHz | 70 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 30 | MHz | 70 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 60 | MHz | 70 | ||
| Standard operating voltage | VDD | 1.8 | 3.6 | V | 71 | ||
| Analog operating voltage (ADC limited to 1 M samples) | VDDA | 1.8 | 3.6 | V | ADC limited to 1 M samples; must be the same potential as VDD | 71 | |
| Analog operating voltage (ADC limited to 2 M samples) | VDDA | 2.4 | 3.6 | V | ADC limited to 2 M samples | 71 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 71 | ||
| Input voltage on RST and FT pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 71 | |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.2 | V | 1.7 V ≤ VDD ≤ 2 V | 71 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 71 | ||
| Internal core voltage to be supplied externally in REGOFF mode | VCAP1 | 1.1 | 1.3 | V | Regulator OFF mode | 71 | |
| Ambient temperature for 7 suffix version, maximum power dissipation | TA | -40 | 105 | °C | 7 suffix version, maximum power dissipation | 71 | |
| Ambient temperature for 7 suffix version, low-power dissipation | TA | -40 | 125 | °C | 7 suffix version, low-power dissipation | 71 | |
| Junction temperature range, 7 suffix version | TJ | -40 | 125 | °C | 7 suffix version | 71 | |
| Capacitance of external capacitor | CEXT | 2.2 | µF | 73 | |||
| ESR of external capacitor | ESR | 2 | Ω | ESR of external capacitor | 73 | ||
| VDD rise time rate | tVDD | 20 | µs/V | Power-up | 74 | ||
| VDD fall time rate | tVDD | 20 | µs/V | Power-down | 74 | ||
| Power-on/power-down reset threshold | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 75 |
| Power-on/power-down reset threshold | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 75 |
| PDR hysteresis | VPDRhyst | 40 | mV | 75 | |||
| Brownout level 1 threshold | VBOR1 | 2.13 | 2.19 | 2.24 | V | Falling edge | 75 |
| Brownout level 1 threshold | VBOR1 | 2.23 | 2.29 | 2.33 | V | Rising edge | 75 |
| BOR hysteresis | VBORhyst | 100 | mV | 75 | |||
| Reset temporization | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 75 | |
| Supply current in Run mode, external clock, all peripherals enabled | IDD | 49 | 72 | mA | External clock, all peripherals enabled, fHCLK 120 MHz; typ at TA = 25 °C, max at TA = 105 °C | 77 | |
| Wakeup from Standby mode | tWUSTDBY | 260 | 375 | 480 | µs | Wakeup from Standby mode | 87 |
| Wakeup from Sleep mode | tWUSLEEP | 1 | µs | Wakeup from Sleep mode | 87 | ||
| External user clock source frequency | fHSE_ext | 1 | 26 | MHz | 88 | ||
| External user clock source frequency | fLSE_ext | 32.768 | 1000 | kHz | 88 | ||
| Oscillator frequency | fOSC_IN | 4 | 26 | MHz | 90 | ||
| Feedback resistor | RF | 200 | k | 90 | |||
| HSI frequency | fHSI | 16 | MHz | 91 | |||
| Accuracy of the HSI oscillator | ACCHSI | -8 | 4.5 | % | TA = -40 to 105 °C | 91 | |
| Accuracy of the HSI oscillator | ACCHSI | -4 | 4 | % | TA = -10 to 85 °C | 91 | |
| Accuracy of the HSI oscillator | ACCHSI | -1 | 1 | % | TA = 25 °C, factory calibrated | 91 | |
| LSI frequency | fLSI | 17 | 32 | 47 | kHz | 92 | |
| LSI oscillator startup time | tsu(LSI) | 15 | 40 | µs | 92 | ||
| LSI oscillator power consumption | IDD(LSI) | 0.4 | 0.6 | µA | 92 | ||
| PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | 93 | |
| PLL multiplier output clock | fPLL_OUT | 24 | 120 | MHz | 93 | ||
| PLL VCO output | fVCO_OUT | 192 | 432 | MHz | 93 |
CAD (KiCad official)
- Symbol:
STM32F205ZCT7 - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
stm32f205zct7-etched.step/stm32f205zct7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f205zct7.step/stm32f205zct7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (181 pp, sha256
774f5ff3acf8fdf5, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32F205ZCT7
**STMicroelectronics** · ST Microelectronics · LQFP-144(20x20)
STM32F205ZCT7 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED0, FSMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED1, FSMC_A20 and DCMI_D4. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED2, FSMC_A21, TIM9_CH1 and DCMI_D6. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TRACED3, FSMC_A22, TIM9_CH2 and DCMI_D7. |
| 6 | VBAT | power_in | Backup supply for the RTC, backup registers and optional backup SRAM. |
| 7 | PC13 | bidirectional | 5 V tolerant I/O (FT) supplied through the power switch, which sinks at most 3 mA, so output speed must not exceed 2 MHz with 30 pF load and it must not source LED current; additional function RTC_AF1. |
| 8 | PC14/OSC32_IN | bidirectional | I/O supplied through the power switch (3 mA sink limit, 2 MHz max output speed with 30 pF load); serves as OSC32_IN for the 32 kHz oscillator. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O supplied through the power switch (3 mA sink limit, 2 MHz max output speed with 30 pF load); serves as OSC32_OUT for the 32 kHz oscillator. |
| 10 | PF0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A0, I2C2_SDA and EVENTOUT. |
| 11 | PF1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A1, I2C2_SCL and EVENTOUT. |
| 12 | PF2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A2, I2C2_SMBA and EVENTOUT. |
| 13 | PF3 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_A3 and analog input ADC3_IN9. |
| 14 | PF4 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_A4 and analog input ADC3_IN14. |
| 15 | PF5 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_A5 and analog input ADC3_IN15. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 18 | PF6 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM10_CH1, FSMC_NIORD and analog input ADC3_IN4. |
| 19 | PF7 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM11_CH1, FSMC_NREG and analog input ADC3_IN5. |
| 20 | PF8 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM13_CH1, FSMC_NIOWR and analog input ADC3_IN6. |
| 21 | PF9 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM14_CH1, FSMC_CD and analog input ADC3_IN7. |
| 22 | PF10 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function FSMC_INTR and analog input ADC3_IN8. |
| 23 | PH0/OSC_IN | bidirectional | 5 V tolerant I/O (FT, except in oscillator mode) that serves as OSC_IN for the 4 to 26 MHz oscillator. |
| 24 | PH1/OSC_OUT | bidirectional | 5 V tolerant I/O (FT, except in oscillator mode) that serves as OSC_OUT for the 4 to 26 MHz oscillator. |
| 25 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 26 | PC0 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function OTG_HS_ULPI_STP and analog input ADC123_IN10. |
| 27 | PC1 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate function ETH_MDC and analog input ADC123_IN11. |
| 28 | PC2 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2 and analog input ADC123_IN12. |
| 29 | PC3 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK and analog input ADC123_IN13. |
| 30 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 31 | VSSA | power_in | Analog ground pin. |
| 32 | VREF+ | power_in | Positive reference voltage input for the ADC. |
| 33 | VDDA | power_in | Analog supply pin. |
| 34 | PA0-WKUP | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with WKUP wake-up function, alternate functions USART2_CTS, UART4_TX, TIM2_CH1_ETR and TIM5_CH1, and analog input ADC123_IN0. |
| 35 | PA1 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions USART2_RTS, UART4_RX, TIM5_CH2 and analog input ADC123_IN1. |
| 36 | PA2 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1 and ETH_MDIO, and analog input ADC123_IN2. |
| 37 | PA3 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions USART2_RX, TIM5_CH4, OTG_HS_ULPI_D0 and ETH_MII_COL, and analog input ADC123_IN3. |
| 38 | VSS | power_in | Ground pin. |
| 39 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 40 | PA4 | bidirectional | 3.3 V tolerant I/O (TTa, except in analog mode) with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC and OTG_HS_SOF, plus analog input ADC12_IN4 and DAC_OUT1. |
| 41 | PA5 | bidirectional | 3.3 V tolerant I/O (TTa, except in analog mode) with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR and TIM8_CH1N, plus analog input ADC12_IN5 and DAC_OUT2. |
| 42 | PA6 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1 and DCMI_PIXCLK, and analog input ADC12_IN6. |
| 43 | PA7 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1 and ETH_MII_RX_DV, and analog input ADC12_IN7. |
| 44 | PC4 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions ETH_RMII_RXD0 and ETH_MII_RXD0, and analog input ADC12_IN14. |
| 45 | PC5 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions ETH_RMII_RXD1 and ETH_MII_RXD1, and analog input ADC12_IN15. |
| 46 | PB0 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1 and ETH_MII_RXD2, and analog input ADC12_IN8. |
| 47 | PB1 | bidirectional | 5 V tolerant I/O (FT, except in analog mode) with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2 and ETH_MII_RXD3, and analog input ADC12_IN9. |
| 48 | PB2/BOOT1 | bidirectional | 5 V tolerant I/O (FT) that also functions as BOOT1, with EVENTOUT. |
| 49 | PF11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions DCMI_D12 and EVENTOUT. |
| 50 | PF12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A6 and EVENTOUT. |
| 51 | VSS | power_in | Ground pin. |
| 52 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 53 | PF13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A7 and EVENTOUT. |
| 54 | PF14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A8 and EVENTOUT. |
| 55 | PF15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A9 and EVENTOUT. |
| 56 | PG0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A10 and EVENTOUT. |
| 57 | PG1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A11 and EVENTOUT. |
| 58 | PE7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D4, TIM1_ETR and EVENTOUT. |
| 59 | PE8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D5, TIM1_CH1N and EVENTOUT. |
| 60 | PE9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D6, TIM1_CH1 and EVENTOUT. |
| 61 | VSS | power_in | Ground pin. |
| 62 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 63 | PE10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D7, TIM1_CH2N and EVENTOUT. |
| 64 | PE11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D8, TIM1_CH2 and EVENTOUT. |
| 65 | PE12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D9, TIM1_CH3N and EVENTOUT. |
| 66 | PE13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D10, TIM1_CH3 and EVENTOUT. |
| 67 | PE14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D11, TIM1_CH4 and EVENTOUT. |
| 68 | PE15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D12, TIM1_BKIN and EVENTOUT. |
| 69 | PB10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER and TIM2_CH3. |
| 70 | PB11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, ETH_RMII_TX_EN and TIM2_CH4. |
| 71 | VCAP_1 | power_in | Regulator decoupling pin to be connected to an external capacitor as specified in Section 6.3.2. |
| 72 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 73 | PB12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID. |
| 74 | PB13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX and OTG_HS_ULPI_D6. |
| 75 | PB14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1 and OTG_HS_DM. |
| 76 | PB15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM12_CH2, OTG_HS_DP and RTC_50Hz. |
| 77 | PD8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D13, USART3_TX and EVENTOUT. |
| 78 | PD9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D14, USART3_RX and EVENTOUT. |
| 79 | PD10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D15, USART3_CK and EVENTOUT. |
| 80 | PD11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A16, USART3_CTS and EVENTOUT. |
| 81 | PD12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A17, TIM4_CH1, USART3_RTS and EVENTOUT. |
| 82 | PD13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A18, TIM4_CH2 and EVENTOUT. |
| 83 | VSS | power_in | Ground pin. |
| 84 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 85 | PD14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D0, TIM4_CH3 and EVENTOUT. |
| 86 | PD15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D1, TIM4_CH4 and EVENTOUT. |
| 87 | PG2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A12 and EVENTOUT. |
| 88 | PG3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A13 and EVENTOUT. |
| 89 | PG4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A14 and EVENTOUT. |
| 90 | PG5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A15 and EVENTOUT. |
| 91 | PG6 | bidirectional | 5 V tolerant I/O (FT) with alternate function FSMC_INT2 and EVENTOUT. |
| 92 | PG7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_INT3, USART6_CK and EVENTOUT. |
| 93 | PG8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART6_RTS, ETH_PPS_OUT and EVENTOUT. |
| 94 | VSS | power_in | Ground pin. |
| 95 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 96 | PC6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0 and TIM3_CH1. |
| 97 | PC7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1 and TIM3_CH2. |
| 98 | PC8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK and DCMI_D2. |
| 99 | PC9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3 and TIM3_CH4. |
| 100 | PA8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL and OTG_FS_SOF. |
| 101 | PA9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA and DCMI_D0; additional function OTG_FS_VBUS. |
| 102 | PA10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID and DCMI_D1. |
| 103 | PA11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4 and OTG_FS_DM. |
| 104 | PA12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR and OTG_FS_DP. |
| 105 | PA13 | bidirectional | 5 V tolerant I/O (FT) that is the JTMS-SWDIO debug pin. |
| 106 | VCAP_2 | power_in | Regulator decoupling pin to be connected to an external capacitor as specified in Section 6.3.2. |
| 107 | VSS | power_in | Ground pin. |
| 108 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 109 | PA14 | bidirectional | 5 V tolerant I/O (FT) that is the JTCK-SWCLK debug pin. |
| 110 | PA15 | bidirectional | 5 V tolerant I/O (FT) with JTDI function and alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR and SPI1_NSS. |
| 111 | PC10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8 and USART3_TX. |
| 112 | PC11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4 and USART3_RX. |
| 113 | PC12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD and USART3_CK. |
| 114 | PD0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D2 and CAN1_RX. |
| 115 | PD1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_D3 and CAN1_TX. |
| 116 | PD2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD and DCMI_D11. |
| 117 | PD3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_CLK and USART2_CTS. |
| 118 | PD4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NOE and USART2_RTS. |
| 119 | PD5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NWE and USART2_TX. |
| 120 | VSS | power_in | Ground pin. |
| 121 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 122 | PD6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NWAIT and USART2_RX. |
| 123 | PD7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART2_CK, FSMC_NE1 and FSMC_NCE2. |
| 124 | PG9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART6_RX, FSMC_NE2 and FSMC_NCE3. |
| 125 | PG10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NCE4_1 and FSMC_NE3. |
| 126 | PG11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NCE4_2, ETH_MII_TX_EN and ETH_RMII_TX_EN. |
| 127 | PG12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NE4 and USART6_RTS. |
| 128 | PG13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A24, USART6_CTS, ETH_MII_TXD0 and ETH_RMII_TXD0. |
| 129 | PG14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_A25, USART6_TX, ETH_MII_TXD1 and ETH_RMII_TXD1. |
| 130 | VSS | power_in | Ground pin. |
| 131 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
| 132 | PG15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions USART6_CTS and DCMI_D13. |
| 133 | PB3 | bidirectional | 5 V tolerant I/O (FT) that carries the JTDO/TRACESWO debug function, with alternate functions SPI3_SCK, I2S3_SCK, TIM2_CH2 and SPI1_SCK. |
| 134 | PB4 | bidirectional | 5 V tolerant I/O (FT) that carries the NJTRST debug function, with alternate functions SPI3_MISO, TIM3_CH1 and SPI1_MISO. |
| 135 | PB5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10 and I2S3_SD. |
| 136 | PB6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5 and USART1_TX. |
| 137 | PB7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX and TIM4_CH2. |
| 138 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input, also listed with VPP function. |
| 139 | PB8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL and CAN1_RX. |
| 140 | PB9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA and CAN1_TX. |
| 141 | PE0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM4_ETR, FSMC_NBL0 and DCMI_D2. |
| 142 | PE1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions FSMC_NBL1 and DCMI_D3. |
| 143 | RFU | unconnected | Reserved for future use; can be tied to VDD, VSS or left unconnected. |
| 144 | VDD | power_in | Digital supply pin; application supply and I/O range is 1.8 to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD) | VDD-VSS | -0.3 | | 4 | V | | 69 |
| Total current into VDD power lines (source) | IVDD | | | 120 | mA | | 70 |
| Total current out of VSS ground lines (sink) | IVSS | | | 120 | mA | | 70 |
| Output current sunk by any I/O and control pin | IIO | | | 25 | mA | Output current sunk by any I/O and control pin | 70 |
| Output current source by any I/Os and control pin | IIO | | | 25 | mA | Output current source by any I/Os and control pin | 70 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 70 |
| Maximum junction temperature | TJ | | | 125 | °C | | 70 |
| Internal AHB clock frequency | fHCLK | 0 | | 120 | MHz | | 70 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 30 | MHz | | 70 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 60 | MHz | | 70 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | | 71 |
| Analog operating voltage (ADC limited to 1 M samples) | VDDA | 1.8 | | 3.6 | V | ADC limited to 1 M samples; must be the same potential as VDD | 71 |
| Analog operating voltage (ADC limited to 2 M samples) | VDDA | 2.4 | | 3.6 | V | ADC limited to 2 M samples | 71 |
| Backup operating voltage | VBAT | 1.65 | | 3.6 | V | | 71 |
| Input voltage on RST and FT pins | VIN | -0.3 | | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 71 |
| Input voltage on RST and FT pins | VIN | -0.3 | | 5.2 | V | 1.7 V ≤ VDD ≤ 2 V | 71 |
| Input voltage on BOOT0 pin | VIN | 0 | | 9 | V | | 71 |
| Internal core voltage to be supplied externally in REGOFF mode | VCAP1 | 1.1 | | 1.3 | V | Regulator OFF mode | 71 |
| Ambient temperature for 7 suffix version, maximum power dissipation | TA | -40 | | 105 | °C | 7 suffix version, maximum power dissipation | 71 |
| Ambient temperature for 7 suffix version, low-power dissipation | TA | -40 | | 125 | °C | 7 suffix version, low-power dissipation | 71 |
| Junction temperature range, 7 suffix version | TJ | -40 | | 125 | °C | 7 suffix version | 71 |
| Capacitance of external capacitor | CEXT | | 2.2 | | µF | | 73 |
| ESR of external capacitor | ESR | | | 2 | Ω | ESR of external capacitor | 73 |
| VDD rise time rate | tVDD | | | 20 | µs/V | Power-up | 74 |
| VDD fall time rate | tVDD | | | 20 | µs/V | Power-down | 74 |
| Power-on/power-down reset threshold | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 75 |
| Power-on/power-down reset threshold | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 75 |
| PDR hysteresis | VPDRhyst | | | 40 | mV | | 75 |
| Brownout level 1 threshold | VBOR1 | 2.13 | 2.19 | 2.24 | V | Falling edge | 75 |
| Brownout level 1 threshold | VBOR1 | 2.23 | 2.29 | 2.33 | V | Rising edge | 75 |
| BOR hysteresis | VBORhyst | | | 100 | mV | | 75 |
| Reset temporization | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | | 75 |
| Supply current in Run mode, external clock, all peripherals enabled | IDD | | 49 | 72 | mA | External clock, all peripherals enabled, fHCLK 120 MHz; typ at TA = 25 °C, max at TA = 105 °C | 77 |
| Wakeup from Standby mode | tWUSTDBY | 260 | 375 | 480 | µs | Wakeup from Standby mode | 87 |
| Wakeup from Sleep mode | tWUSLEEP | | 1 | | µs | Wakeup from Sleep mode | 87 |
| External user clock source frequency | fHSE_ext | 1 | | 26 | MHz | | 88 |
| External user clock source frequency | fLSE_ext | | 32.768 | 1000 | kHz | | 88 |
| Oscillator frequency | fOSC_IN | 4 | | 26 | MHz | | 90 |
| Feedback resistor | RF | | | 200 | k | | 90 |
| HSI frequency | fHSI | | 16 | | MHz | | 91 |
| Accuracy of the HSI oscillator | ACCHSI | -8 | | 4.5 | % | TA = -40 to 105 °C | 91 |
| Accuracy of the HSI oscillator | ACCHSI | -4 | | 4 | % | TA = -10 to 85 °C | 91 |
| Accuracy of the HSI oscillator | ACCHSI | -1 | | 1 | % | TA = 25 °C, factory calibrated | 91 |
| LSI frequency | fLSI | 17 | 32 | 47 | kHz | | 92 |
| LSI oscillator startup time | tsu(LSI) | | 15 | 40 | µs | | 92 |
| LSI oscillator power consumption | IDD(LSI) | | 0.4 | 0.6 | µA | | 92 |
| PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | | 93 |
| PLL multiplier output clock | fPLL_OUT | 24 | | 120 | MHz | | 93 |
| PLL VCO output | fVCO_OUT | 192 | | 432 | MHz | | 93 |
## CAD (KiCad official)
- Symbol: `STM32F205ZCT7`
- Footprint: `Package_QFP:LQFP-144_20x20mm_P0.5mm`
- 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files: `stm32f205zct7-etched.step` / `stm32f205zct7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f205zct7.step` / `stm32f205zct7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32f205zct7.pdf) (181 pp, sha256 `774f5ff3acf8fdf5`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32f205zct7-datasheet.pdf)