← Commit history

Initial commit: component/stm32f205rbt6

Ray ·f075873a6d ·
2 files changed +577
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F205RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F205RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery voltage supply pin for the RTC, the 32 kHz oscillator and the backup registers when VDD is not present. |+| 2 | PC13-RTC_AF1 | bidirectional | 5V-tolerant GPIO supplied through the internal power switch (limited to 3 mA, max 2 MHz/30 pF in output mode) with RTC_AF1 and EVENTOUT alternate functions. |+| 3 | PC14-OSC32_IN | bidirectional | 5V-tolerant GPIO supplied through the power switch, alternatively usable as OSC32_IN for the 32.768 kHz RTC crystal oscillator input, with EVENTOUT alternate function. |+| 4 | PC15-OSC32_OUT | bidirectional | 5V-tolerant GPIO supplied through the power switch, alternatively usable as OSC32_OUT for the 32.768 kHz RTC crystal oscillator output, with EVENTOUT alternate function. |+| 5 | PH0-OSC_IN | bidirectional | 5V-tolerant GPIO, alternatively usable as OSC_IN for the 4-26 MHz high-speed external crystal oscillator input, with EVENTOUT alternate function. |+| 6 | PH1-OSC_OUT | bidirectional | 5V-tolerant GPIO, alternatively usable as OSC_OUT for the 4-26 MHz high-speed external crystal oscillator output, with EVENTOUT alternate function. |+| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor; driving it low resets the device. |+| 8 | PC0 | bidirectional | 5V-tolerant GPIO with alternate function OTG_HS_ULPI_STP and additional function ADC123_IN10, plus EVENTOUT. |+| 9 | PC1 | bidirectional | 5V-tolerant GPIO with alternate function ETH_MDC and additional function ADC123_IN11, plus EVENTOUT. |+| 10 | PC2 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2 and additional function ADC123_IN12, plus EVENTOUT. |+| 11 | PC3 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK and additional function ADC123_IN13, plus EVENTOUT. |+| 12 | VSSA | power_in | Analog ground supply pin. |+| 13 | VDDA | power_in | Analog power supply pin. |+| 14 | PA0-WKUP | bidirectional | 5V-tolerant GPIO with alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR and additional functions ADC123_IN0/WKUP, plus EVENTOUT. |+| 15 | PA1 | bidirectional | 5V-tolerant GPIO with alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2 and additional function ADC123_IN1, plus EVENTOUT. |+| 16 | PA2 | bidirectional | 5V-tolerant GPIO with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO and additional function ADC123_IN2, plus EVENTOUT. |+| 17 | PA3 | bidirectional | 5V-tolerant GPIO with alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL and additional function ADC123_IN3, plus EVENTOUT. |+| 18 | VSS | power_in | Ground supply pin. |+| 19 | VDD | power_in | Digital power supply pin (1.8 to 3.6 V application supply). |+| 20 | PA4 | bidirectional | 3.3V-tolerant (TTa) GPIO with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS and additional functions ADC12_IN4/DAC_OUT1, plus EVENTOUT. |+| 21 | PA5 | bidirectional | 3.3V-tolerant (TTa) GPIO with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N and additional functions ADC12_IN5/DAC_OUT2, plus EVENTOUT. |+| 22 | PA6 | bidirectional | 5V-tolerant GPIO with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN and additional function ADC12_IN6, plus EVENTOUT. |+| 23 | PA7 | bidirectional | 5V-tolerant GPIO with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV and additional function ADC12_IN7, plus EVENTOUT. |+| 24 | PC4 | bidirectional | 5V-tolerant GPIO with alternate functions ETH_RMII_RXD0, ETH_MII_RXD0 and additional function ADC12_IN14, plus EVENTOUT. |+| 25 | PC5 | bidirectional | 5V-tolerant GPIO with alternate functions ETH_RMII_RXD1, ETH_MII_RXD1 and additional function ADC12_IN15, plus EVENTOUT. |+| 26 | PB0 | bidirectional | 5V-tolerant GPIO with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N and additional function ADC12_IN8, plus EVENTOUT. |+| 27 | PB1 | bidirectional | 5V-tolerant GPIO with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N and additional function ADC12_IN9, plus EVENTOUT. |+| 28 | PB2/BOOT1 | bidirectional | 5V-tolerant GPIO also usable as BOOT1 boot-mode selection pin, with EVENTOUT alternate function. |+| 29 | PB10 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, plus EVENTOUT. |+| 30 | PB11 | bidirectional | 5V-tolerant GPIO with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, plus EVENTOUT. |+| 31 | VCAP_1 | power_out | Internal voltage regulator output pin, to be connected to an external 2.2 µF decoupling capacitor. |+| 32 | VDD | power_in | Digital power supply pin (1.8 to 3.6 V application supply). |+| 33 | PB12 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, plus EVENTOUT. |+| 34 | PB13 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1 and additional function OTG_HS_VBUS, plus EVENTOUT. |+| 35 | PB14 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, plus EVENTOUT. |+| 36 | PB15 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, plus EVENTOUT. |+| 37 | PC6 | bidirectional | 5V-tolerant GPIO with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, plus EVENTOUT. |+| 38 | PC7 | bidirectional | 5V-tolerant GPIO with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, plus EVENTOUT. |+| 39 | PC8 | bidirectional | 5V-tolerant GPIO with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, plus EVENTOUT. |+| 40 | PC9 | bidirectional | 5V-tolerant GPIO with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, plus EVENTOUT. |+| 41 | PA8 | bidirectional | 5V-tolerant GPIO with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, plus EVENTOUT. |+| 42 | PA9 | bidirectional | 5V-tolerant GPIO with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0 and additional function OTG_FS_VBUS, plus EVENTOUT. |+| 43 | PA10 | bidirectional | 5V-tolerant GPIO with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, plus EVENTOUT. |+| 44 | PA11 | bidirectional | 5V-tolerant GPIO with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, plus EVENTOUT. |+| 45 | PA12 | bidirectional | 5V-tolerant GPIO with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, plus EVENTOUT. |+| 46 | PA13 | bidirectional | 5V-tolerant GPIO that defaults to the JTMS-SWDIO debug function after reset, with EVENTOUT alternate function. |+| 47 | VCAP_2 | power_out | Internal voltage regulator output pin, to be connected to an external 2.2 µF decoupling capacitor. |+| 48 | VDD | power_in | Digital power supply pin (1.8 to 3.6 V application supply). |+| 49 | PA14 | bidirectional | 5V-tolerant GPIO that defaults to the JTCK-SWCLK debug function after reset, with EVENTOUT alternate function. |+| 50 | PA15 | bidirectional | 5V-tolerant GPIO that defaults to the JTDI debug function after reset, with alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, plus EVENTOUT. |+| 51 | PC10 | bidirectional | 5V-tolerant GPIO with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, plus EVENTOUT. |+| 52 | PC11 | bidirectional | 5V-tolerant GPIO with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, plus EVENTOUT. |+| 53 | PC12 | bidirectional | 5V-tolerant GPIO with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, plus EVENTOUT. |+| 54 | PD2 | bidirectional | 5V-tolerant GPIO with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, plus EVENTOUT. |+| 55 | PB3 | bidirectional | 5V-tolerant GPIO that defaults to the JTDO/TRACESWO debug function after reset, with alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK, I2S3_SCK, plus EVENTOUT. |+| 56 | PB4 | bidirectional | 5V-tolerant GPIO that defaults to the NJTRST debug function after reset, with alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, plus EVENTOUT. |+| 57 | PB5 | bidirectional | 5V-tolerant GPIO with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, plus EVENTOUT. |+| 58 | PB6 | bidirectional | 5V-tolerant GPIO with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, plus EVENTOUT. |+| 59 | PB7 | bidirectional | 5V-tolerant GPIO with alternate functions I2C1_SDA, FSMC_NL (also named FSMC_NADV), DCMI_VSYNC, USART1_RX, TIM4_CH2, plus EVENTOUT. |+| 60 | BOOT0 | input | Dedicated input-only boot-mode selection pin (also marked VPP) sampled at reset to select the boot memory source. |+| 61 | PB8 | bidirectional | 5V-tolerant GPIO with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, plus EVENTOUT. |+| 62 | PB9 | bidirectional | 5V-tolerant GPIO with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, plus EVENTOUT. |+| 63 | VSS | power_in | Ground supply pin. |+| 64 | VDD | power_in | Digital power supply pin (1.8 to 3.6 V application supply). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F205RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f205rbt6-etched.step` / `stm32f205rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f205rbt6.step` / `stm32f205rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172476020047872) (178 pp, sha256 `39f1332cfc0252f9`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f205rbt6-datasheet.pdf)
page.jsonadded+477
@@ -0,0 +1,477 @@+{+  "slug": "stm32f205rbt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f205rbt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f205rbt6.kicad_sym",+    "stm32f205rbt6.kicad_mod",+    "stm32f205rbt6.glb",+    "stm32f205rbt6.step",+    "stm32f205rbt6.lbr",+    "docs/hero.png",+    "docs/stm32f205rbt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F205RBT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172476020047872",+    "parts": {+      "symbol": "stm32f205rbt6.kicad_sym",+      "footprint": "stm32f205rbt6.kicad_mod",+      "model_3d": "stm32f205rbt6-etched.glb",+      "model_3d_plain": "stm32f205rbt6.glb",+      "model_3d_step": "stm32f205rbt6-etched.step",+      "model_3d_step_plain": "stm32f205rbt6.step",+      "lbr": "stm32f205rbt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C8364"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery voltage supply pin for the RTC, the 32 kHz oscillator and the backup registers when VDD is not present."+      },+      {+        "number": "2",+        "name": "PC13-RTC_AF1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO supplied through the internal power switch (limited to 3 mA, max 2 MHz/30 pF in output mode) with RTC_AF1 and EVENTOUT alternate functions."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO supplied through the power switch, alternatively usable as OSC32_IN for the 32.768 kHz RTC crystal oscillator input, with EVENTOUT alternate function."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO supplied through the power switch, alternatively usable as OSC32_OUT for the 32.768 kHz RTC crystal oscillator output, with EVENTOUT alternate function."+      },+      {+        "number": "5",+        "name": "PH0-OSC_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO, alternatively usable as OSC_IN for the 4-26 MHz high-speed external crystal oscillator input, with EVENTOUT alternate function."+      },+      {+        "number": "6",+        "name": "PH1-OSC_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO, alternatively usable as OSC_OUT for the 4-26 MHz high-speed external crystal oscillator output, with EVENTOUT alternate function."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with an embedded weak pull-up resistor; driving it low resets the device."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate function OTG_HS_ULPI_STP and additional function ADC123_IN10, plus EVENTOUT."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate function ETH_MDC and additional function ADC123_IN11, plus EVENTOUT."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2 and additional function ADC123_IN12, plus EVENTOUT."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK and additional function ADC123_IN13, plus EVENTOUT."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply pin."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin."+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR and additional functions ADC123_IN0/WKUP, plus EVENTOUT."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2 and additional function ADC123_IN1, plus EVENTOUT."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO and additional function ADC123_IN2, plus EVENTOUT."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL and additional function ADC123_IN3, plus EVENTOUT."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply pin."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.8 to 3.6 V application supply)."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3V-tolerant (TTa) GPIO with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS and additional functions ADC12_IN4/DAC_OUT1, plus EVENTOUT."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3V-tolerant (TTa) GPIO with alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N and additional functions ADC12_IN5/DAC_OUT2, plus EVENTOUT."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN and additional function ADC12_IN6, plus EVENTOUT."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV and additional function ADC12_IN7, plus EVENTOUT."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions ETH_RMII_RXD0, ETH_MII_RXD0 and additional function ADC12_IN14, plus EVENTOUT."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions ETH_RMII_RXD1, ETH_MII_RXD1 and additional function ADC12_IN15, plus EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N and additional function ADC12_IN8, plus EVENTOUT."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N and additional function ADC12_IN9, plus EVENTOUT."+      },+      {+        "number": "28",+        "name": "PB2/BOOT1",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO also usable as BOOT1 boot-mode selection pin, with EVENTOUT alternate function."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_SCK, I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, plus EVENTOUT."+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN, ETH_MII_TX_EN, TIM2_CH4, plus EVENTOUT."+      },+      {+        "number": "31",+        "name": "VCAP_1",+        "type": "power_out",+        "description": "Internal voltage regulator output pin, to be connected to an external 2.2 µF decoupling capacitor."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.8 to 3.6 V application supply)."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, plus EVENTOUT."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_SCK, I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1 and additional function OTG_HS_VBUS, plus EVENTOUT."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, plus EVENTOUT."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz, plus EVENTOUT."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, plus EVENTOUT."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, plus EVENTOUT."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, plus EVENTOUT."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2S2_CKIN, I2S3_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, plus EVENTOUT."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, plus EVENTOUT."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0 and additional function OTG_FS_VBUS, plus EVENTOUT."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, plus EVENTOUT."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, plus EVENTOUT."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, plus EVENTOUT."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO that defaults to the JTMS-SWDIO debug function after reset, with EVENTOUT alternate function."+      },+      {+        "number": "47",+        "name": "VCAP_2",+        "type": "power_out",+        "description": "Internal voltage regulator output pin, to be connected to an external 2.2 µF decoupling capacitor."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.8 to 3.6 V application supply)."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO that defaults to the JTCK-SWCLK debug function after reset, with EVENTOUT alternate function."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO that defaults to the JTDI debug function after reset, with alternate functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, plus EVENTOUT."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI3_SCK, I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, plus EVENTOUT."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, plus EVENTOUT."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, plus EVENTOUT."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, plus EVENTOUT."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO that defaults to the JTDO/TRACESWO debug function after reset, with alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK, I2S3_SCK, plus EVENTOUT."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO that defaults to the NJTRST debug function after reset, with alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, plus EVENTOUT."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, plus EVENTOUT."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, plus EVENTOUT."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions I2C1_SDA, FSMC_NL (also named FSMC_NADV), DCMI_VSYNC, USART1_RX, TIM4_CH2, plus EVENTOUT."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated input-only boot-mode selection pin (also marked VPP) sampled at reset to select the boot memory source."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, plus EVENTOUT."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO with alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, plus EVENTOUT."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply pin."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin (1.8 to 3.6 V application supply)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 52,+        "cost_usd": 1.1361,+        "at": "2026-09-23T08:11:08"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172476020047872",+        "pages": 178,+        "sha256": "39f1332cfc0252f9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file