← Commit history

Initial commit: component/stm32f107rct6

Ray ·dfc701cff6 ·
2 files changed +579
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F107RCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F107RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup battery supply voltage (1.8 to 3.6 V) for RTC and backup registers |+| 2 | PC13-TAMPER-RTC | bidirectional | Port C pin 13: GPIO or TAMPER/RTC input (limited to 2 MHz output mode with max 30 pF load) |+| 3 | PC14-OSC32_IN | input | Port C pin 14: 32 kHz oscillator input (limited to 2 MHz output mode with max 30 pF load) |+| 4 | PC15-OSC32_OUT | output | Port C pin 15: 32 kHz oscillator output (limited to 2 MHz output mode with max 30 pF load) |+| 5 | OSC_IN | input | High-speed external oscillator input (3 to 25 MHz) or PD0 remapped |+| 6 | OSC_OUT | output | High-speed external oscillator output or PD1 remapped |+| 7 | NRST | input | Active-low external reset input with internal pull-up and 100ns filtering |+| 8 | PC0 | bidirectional | Port C pin 0: GPIO, ADC12_IN10 analog input channel |+| 9 | PC1 | bidirectional | Port C pin 1: GPIO, ADC12_IN11 or ETH_MII/RMII_MDC alternate function |+| 10 | PC2 | bidirectional | Port C pin 2: GPIO, ADC12_IN12 or ETH_MII_TXD2 alternate function |+| 11 | PC3 | bidirectional | Port C pin 3: GPIO, ADC12_IN13 or ETH_MII_TX_CLK alternate function |+| 12 | VSSA | power_in | Analog ground supply (connected to VSS and must be below 50 mV from main VSS) |+| 13 | VDDA | power_in | Analog power supply (2.4 to 3.6 V for ADC use, 2.0 to 3.6 V without ADC) |+| 14 | PA0-WKUP | bidirectional | Port A pin 0: GPIO, wakeup input, USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1 |+| 15 | PA1 | bidirectional | Port A pin 1: GPIO, USART2_RTS, ADC12_IN1, TIM2_CH2, TIM5_CH2 or ETH interface alternate |+| 16 | PA2 | bidirectional | Port A pin 2: GPIO, USART2_TX, ADC12_IN2, TIM2_CH3, TIM5_CH3 or ETH_MDIO alternate |+| 17 | PA3 | bidirectional | Port A pin 3: GPIO, USART2_RX, ADC12_IN3, TIM2_CH4, TIM5_CH4 or ETH_MII_COL alternate |+| 18 | VSS_4 | power_in | Ground supply (referenced to all other VSS pins, max 50 mV variation) |+| 19 | VDD_4 | power_in | Power supply (2.0 to 3.6 V) for I/O and internal logic |+| 20 | PA4 | bidirectional | Port A pin 4: GPIO, SPI1_NSS, DAC_OUT1, USART2_CK or SPI3_NSS/I2S3_WS remap |+| 21 | PA5 | bidirectional | Port A pin 5: GPIO, SPI1_SCK, DAC_OUT2, ADC12_IN5 |+| 22 | PA6 | bidirectional | Port A pin 6: GPIO, SPI1_MISO, ADC12_IN6, TIM3_CH1 or TIM1_BKIN remap |+| 23 | PA7 | bidirectional | Port A pin 7: GPIO, SPI1_MOSI, ADC12_IN7, TIM3_CH2 or TIM1_CH1N/ETH_MII_RX_DV remap |+| 24 | PC4 | bidirectional | Port C pin 4: GPIO, ADC12_IN14 or ETH_MII_RXD0/ETH_RMII_RXD0 alternate |+| 25 | PC5 | bidirectional | Port C pin 5: GPIO, ADC12_IN15 or ETH_MII_RXD1/ETH_RMII_RXD1 alternate |+| 26 | PB0 | bidirectional | Port B pin 0: GPIO, ADC12_IN8, TIM3_CH3 or TIM1_CH2N remap |+| 27 | PB1 | bidirectional | Port B pin 1: GPIO, ADC12_IN9, TIM3_CH4 or TIM1_CH3N remap |+| 28 | PB2 | bidirectional | Port B pin 2: BOOT1 pin for boot selection |+| 29 | PB10 | bidirectional | Port B pin 10: GPIO, I2C2_SCL, USART3_TX, TIM2_CH3 or ETH_MII_RX_ER remap |+| 30 | PB11 | bidirectional | Port B pin 11: GPIO, I2C2_SDA, USART3_RX, TIM2_CH4 or ETH_MII_TX_EN/ETH_RMII_TX_EN |+| 31 | VSS_1 | power_in | Ground supply (referenced to all other VSS pins, max 50 mV variation) |+| 32 | VDD_1 | power_in | Power supply (2.0 to 3.6 V) for I/O and internal logic |+| 33 | PB12 | bidirectional | Port B pin 12: GPIO, SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX or ETH alternate |+| 34 | PB13 | bidirectional | Port B pin 13: GPIO, SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX or ETH alternate |+| 35 | PB14 | bidirectional | Port B pin 14: GPIO, SPI2_MISO, TIM1_CH2N, USART3_RTS alternate function |+| 36 | PB15 | bidirectional | Port B pin 15: GPIO, SPI2_MOSI, I2S2_SD, TIM1_CH3N or other alternates |+| 37 | PC6 | bidirectional | Port C pin 6: GPIO, I2S2_MCK, TIM3_CH1 alternate function |+| 38 | PC7 | bidirectional | Port C pin 7: GPIO, I2S3_MCK, TIM3_CH2 alternate function |+| 39 | PC8 | bidirectional | Port C pin 8: GPIO, TIM3_CH3 alternate function |+| 40 | PC9 | bidirectional | Port C pin 9: GPIO, TIM3_CH4 alternate function |+| 41 | PA8 | bidirectional | Port A pin 8: GPIO, USART1_CK, OTG_FS_SOF, TIM1_CH1, MCO main clock output |+| 42 | PA9 | bidirectional | Port A pin 9: GPIO, USART1_TX, TIM1_CH2, OTG_FS_VBUS alternate |+| 43 | PA10 | bidirectional | Port A pin 10: GPIO, USART1_RX, TIM1_CH3, OTG_FS_ID alternate function |+| 44 | PA11 | bidirectional | Port A pin 11: GPIO, USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM |+| 45 | PA12 | bidirectional | Port A pin 12: GPIO, USART1_RTS, OTG_FS_DP, CAN1_TX, TIM1_ETR alternate |+| 46 | PA13 | bidirectional | Port A pin 13: JTMS/SWDIO debug pin (JTAG/SWD interface) |+| 47 | VSS_2 | power_in | Ground supply (referenced to all other VSS pins, max 50 mV variation) |+| 48 | VDD_2 | power_in | Power supply (2.0 to 3.6 V) for I/O and internal logic |+| 49 | PA14 | bidirectional | Port A pin 14: JTCK/SWCLK debug pin (JTAG/SWD interface) |+| 50 | PA15 | bidirectional | Port A pin 15: JTDI debug pin, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR or SPI1_NSS remap |+| 51 | PC10 | bidirectional | Port C pin 10: GPIO, UART4_TX, USART3_TX, SPI3_SCK, I2S3_CK alternate |+| 52 | PC11 | bidirectional | Port C pin 11: GPIO, UART4_RX, USART3_RX, SPI3_MISO alternate function |+| 53 | PC12 | bidirectional | Port C pin 12: GPIO, UART5_TX, USART3_CK, SPI3_MOSI, I2S3_SD alternate |+| 54 | PD2 | bidirectional | Port D pin 2: GPIO, TIM3_ETR, UART5_RX alternate function |+| 55 | PB3 | bidirectional | Port B pin 3: JTDO debug pin, SPI3_SCK, I2S3_CK, TRACESWO, TIM2_CH2 or SPI1_SCK remap |+| 56 | PB4 | bidirectional | Port B pin 4: NJTRST debug pin, SPI3_MISO, TIM3_CH1 or SPI1_MISO remap |+| 57 | PB5 | bidirectional | Port B pin 5: GPIO, I2C1_SMBA, SPI3_MOSI, I2S3_SD, ETH_MII_PPS_OUT, TIM3_CH2 or other alternates |+| 58 | PB6 | bidirectional | Port B pin 6: GPIO, I2C1_SCL, TIM4_CH1, USART1_TX, CAN2_TX alternate |+| 59 | PB7 | bidirectional | Port B pin 7: GPIO, I2C1_SDA, TIM4_CH2, USART1_RX alternate function |+| 60 | BOOT0 | input | Boot selection input pin (sampled at reset): 0=Flash, 1=System Memory |+| 61 | PB8 | bidirectional | Port B pin 8: GPIO, TIM4_CH3, ETH_MII_TXD3, I2C1_SCL, CAN1_RX alternate |+| 62 | PB9 | bidirectional | Port B pin 9: GPIO, TIM4_CH4, I2C1_SDA, CAN1_TX alternate function |+| 63 | VSS_3 | power_in | Ground supply (referenced to all other VSS pins, max 50 mV variation) |+| 64 | VDD_3 | power_in | Power supply (2.0 to 3.6 V) for I/O and internal logic |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F107RCT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f107rct6-etched.step` / `stm32f107rct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f107rct6.step` / `stm32f107rct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586173091467186176) (103 pp, sha256 `de6789e4bf233926`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f107rct6-datasheet.pdf)
page.jsonadded+479
@@ -0,0 +1,479 @@+{+  "slug": "stm32f107rct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f107rct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f107rct6.kicad_sym",+    "stm32f107rct6.kicad_mod",+    "stm32f107rct6.glb",+    "stm32f107rct6.step",+    "stm32f107rct6.lbr",+    "docs/hero.png",+    "docs/stm32f107rct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F107RCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586173091467186176",+    "parts": {+      "symbol": "stm32f107rct6.kicad_sym",+      "footprint": "stm32f107rct6.kicad_mod",+      "model_3d": "stm32f107rct6-etched.glb",+      "model_3d_plain": "stm32f107rct6.glb",+      "model_3d_step": "stm32f107rct6-etched.step",+      "model_3d_step_plain": "stm32f107rct6.step",+      "lbr": "stm32f107rct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C13643"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup battery supply voltage (1.8 to 3.6 V) for RTC and backup registers"+      },+      {+        "number": "2",+        "name": "PC13-TAMPER-RTC",+        "type": "bidirectional",+        "description": "Port C pin 13: GPIO or TAMPER/RTC input (limited to 2 MHz output mode with max 30 pF load)"+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "input",+        "description": "Port C pin 14: 32 kHz oscillator input (limited to 2 MHz output mode with max 30 pF load)"+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "output",+        "description": "Port C pin 15: 32 kHz oscillator output (limited to 2 MHz output mode with max 30 pF load)"+      },+      {+        "number": "5",+        "name": "OSC_IN",+        "type": "input",+        "description": "High-speed external oscillator input (3 to 25 MHz) or PD0 remapped"+      },+      {+        "number": "6",+        "name": "OSC_OUT",+        "type": "output",+        "description": "High-speed external oscillator output or PD1 remapped"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "input",+        "description": "Active-low external reset input with internal pull-up and 100ns filtering"+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "Port C pin 0: GPIO, ADC12_IN10 analog input channel"+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "Port C pin 1: GPIO, ADC12_IN11 or ETH_MII/RMII_MDC alternate function"+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "Port C pin 2: GPIO, ADC12_IN12 or ETH_MII_TXD2 alternate function"+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "Port C pin 3: GPIO, ADC12_IN13 or ETH_MII_TX_CLK alternate function"+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply (connected to VSS and must be below 50 mV from main VSS)"+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply (2.4 to 3.6 V for ADC use, 2.0 to 3.6 V without ADC)"+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "Port A pin 0: GPIO, wakeup input, USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1"+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "Port A pin 1: GPIO, USART2_RTS, ADC12_IN1, TIM2_CH2, TIM5_CH2 or ETH interface alternate"+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "Port A pin 2: GPIO, USART2_TX, ADC12_IN2, TIM2_CH3, TIM5_CH3 or ETH_MDIO alternate"+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "Port A pin 3: GPIO, USART2_RX, ADC12_IN3, TIM2_CH4, TIM5_CH4 or ETH_MII_COL alternate"+      },+      {+        "number": "18",+        "name": "VSS_4",+        "type": "power_in",+        "description": "Ground supply (referenced to all other VSS pins, max 50 mV variation)"+      },+      {+        "number": "19",+        "name": "VDD_4",+        "type": "power_in",+        "description": "Power supply (2.0 to 3.6 V) for I/O and internal logic"+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "Port A pin 4: GPIO, SPI1_NSS, DAC_OUT1, USART2_CK or SPI3_NSS/I2S3_WS remap"+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "Port A pin 5: GPIO, SPI1_SCK, DAC_OUT2, ADC12_IN5"+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "Port A pin 6: GPIO, SPI1_MISO, ADC12_IN6, TIM3_CH1 or TIM1_BKIN remap"+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "Port A pin 7: GPIO, SPI1_MOSI, ADC12_IN7, TIM3_CH2 or TIM1_CH1N/ETH_MII_RX_DV remap"+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "Port C pin 4: GPIO, ADC12_IN14 or ETH_MII_RXD0/ETH_RMII_RXD0 alternate"+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "Port C pin 5: GPIO, ADC12_IN15 or ETH_MII_RXD1/ETH_RMII_RXD1 alternate"+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "Port B pin 0: GPIO, ADC12_IN8, TIM3_CH3 or TIM1_CH2N remap"+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "Port B pin 1: GPIO, ADC12_IN9, TIM3_CH4 or TIM1_CH3N remap"+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "Port B pin 2: BOOT1 pin for boot selection"+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "Port B pin 10: GPIO, I2C2_SCL, USART3_TX, TIM2_CH3 or ETH_MII_RX_ER remap"+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "Port B pin 11: GPIO, I2C2_SDA, USART3_RX, TIM2_CH4 or ETH_MII_TX_EN/ETH_RMII_TX_EN"+      },+      {+        "number": "31",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Ground supply (referenced to all other VSS pins, max 50 mV variation)"+      },+      {+        "number": "32",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Power supply (2.0 to 3.6 V) for I/O and internal logic"+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "Port B pin 12: GPIO, SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX or ETH alternate"+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "Port B pin 13: GPIO, SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX or ETH alternate"+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "Port B pin 14: GPIO, SPI2_MISO, TIM1_CH2N, USART3_RTS alternate function"+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "Port B pin 15: GPIO, SPI2_MOSI, I2S2_SD, TIM1_CH3N or other alternates"+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "Port C pin 6: GPIO, I2S2_MCK, TIM3_CH1 alternate function"+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "Port C pin 7: GPIO, I2S3_MCK, TIM3_CH2 alternate function"+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "Port C pin 8: GPIO, TIM3_CH3 alternate function"+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "Port C pin 9: GPIO, TIM3_CH4 alternate function"+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "Port A pin 8: GPIO, USART1_CK, OTG_FS_SOF, TIM1_CH1, MCO main clock output"+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "Port A pin 9: GPIO, USART1_TX, TIM1_CH2, OTG_FS_VBUS alternate"+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "Port A pin 10: GPIO, USART1_RX, TIM1_CH3, OTG_FS_ID alternate function"+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "Port A pin 11: GPIO, USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM"+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "Port A pin 12: GPIO, USART1_RTS, OTG_FS_DP, CAN1_TX, TIM1_ETR alternate"+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "Port A pin 13: JTMS/SWDIO debug pin (JTAG/SWD interface)"+      },+      {+        "number": "47",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Ground supply (referenced to all other VSS pins, max 50 mV variation)"+      },+      {+        "number": "48",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Power supply (2.0 to 3.6 V) for I/O and internal logic"+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "Port A pin 14: JTCK/SWCLK debug pin (JTAG/SWD interface)"+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "Port A pin 15: JTDI debug pin, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR or SPI1_NSS remap"+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "Port C pin 10: GPIO, UART4_TX, USART3_TX, SPI3_SCK, I2S3_CK alternate"+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "Port C pin 11: GPIO, UART4_RX, USART3_RX, SPI3_MISO alternate function"+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "Port C pin 12: GPIO, UART5_TX, USART3_CK, SPI3_MOSI, I2S3_SD alternate"+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "Port D pin 2: GPIO, TIM3_ETR, UART5_RX alternate function"+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "Port B pin 3: JTDO debug pin, SPI3_SCK, I2S3_CK, TRACESWO, TIM2_CH2 or SPI1_SCK remap"+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "Port B pin 4: NJTRST debug pin, SPI3_MISO, TIM3_CH1 or SPI1_MISO remap"+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "Port B pin 5: GPIO, I2C1_SMBA, SPI3_MOSI, I2S3_SD, ETH_MII_PPS_OUT, TIM3_CH2 or other alternates"+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "Port B pin 6: GPIO, I2C1_SCL, TIM4_CH1, USART1_TX, CAN2_TX alternate"+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "Port B pin 7: GPIO, I2C1_SDA, TIM4_CH2, USART1_RX alternate function"+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot selection input pin (sampled at reset): 0=Flash, 1=System Memory"+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "Port B pin 8: GPIO, TIM4_CH3, ETH_MII_TXD3, I2C1_SCL, CAN1_RX alternate"+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "Port B pin 9: GPIO, TIM4_CH4, I2C1_SDA, CAN1_TX alternate function"+      },+      {+        "number": "63",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Ground supply (referenced to all other VSS pins, max 50 mV variation)"+      },+      {+        "number": "64",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Power supply (2.0 to 3.6 V) for I/O and internal logic"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Note 9 on page 29: For LQFP64, pins 5-6 are configured as OSC_IN/OSC_OUT after reset, but can be rem; Pins PC13-15 (pins 2-4) are supplied through power switch with limited output capability: 2 MHz max ; The STM32F107RCT6 variant includes Ethernet MAC (not present in F105 versions). Ethernet alternate f"+        ],+        "pages_sent": 103,+        "cost_usd": 1.186,+        "at": "2026-09-23T14:41:04"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586173091467186176",+        "pages": 103,+        "sha256": "de6789e4bf233926",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file