← Commit history

Initial commit: component/stm32f105rbt6

Ray ·e25b3321cb ·
2 files changed +593
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F105RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F105RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply 1.8 to 3.6 V for RTC, backup registers, and external 32 kHz oscillator. |+| 2 | PC13-TAMPER-RTC | bidirectional | General-purpose I/O pin, can be configured as TAMPER-RTC function (supplied through power switch). |+| 3 | PC14-OSC32_IN | input | 32.768 kHz oscillator input pin (supplied through power switch). |+| 4 | PC15-OSC32_OUT | output | 32.768 kHz oscillator output pin (supplied through power switch). |+| 5 | OSC_IN | input | Main oscillator input for 3-25 MHz crystal/ceramic resonator; PD0 after software remap. |+| 6 | OSC_OUT | output | Main oscillator output; PD1 after software remap. |+| 7 | NRST | input | Active low external reset pin with internal pull-up and filtering. |+| 8 | PC0 | bidirectional | General-purpose I/O pin; alternate function ADC12_IN10. |+| 9 | PC1 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN11, ETH_MII_MDC, ETH_RMII_MDC. |+| 10 | PC2 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN12, ETH_MII_TXD2. |+| 11 | PC3 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN13, ETH_MII_TX_CLK. |+| 12 | VSSA | power_in | Analog ground for ADC, DAC, temperature sensor, and PLL/RC oscillators. |+| 13 | VDDA | power_in | Analog power supply 2.4 to 3.6 V for ADC, DAC, and analog circuits (minimum 2.4 V when ADC used). |+| 14 | PA0-WKUP | bidirectional | General-purpose I/O with wakeup from Stop/Standby; alternate functions USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1, Ethernet. |+| 15 | PA1 | bidirectional | General-purpose I/O pin; alternate functions USART2_RTS, ADC12_IN1, TIM5_CH2, TIM2_CH2, Ethernet. |+| 16 | PA2 | bidirectional | General-purpose I/O pin; alternate functions USART2_TX, TIM5_CH3, ADC12_IN2, TIM2_CH3, Ethernet. |+| 17 | PA3 | bidirectional | General-purpose I/O pin; alternate functions USART2_RX, TIM5_CH4, ADC12_IN3, TIM2_CH4, Ethernet. |+| 18 | VSS_4 | power_in | Ground connection. |+| 19 | VDD_4 | power_in | Main power supply 2.0 to 3.6 V. |+| 20 | PA4 | bidirectional | General-purpose I/O pin; default functions SPI1_NSS, DAC_OUT1, USART2_CK, ADC12_IN4; remap functions SPI3_NSS, I2S3_WS. |+| 21 | PA5 | bidirectional | General-purpose I/O pin; alternate functions SPI1_SCK, DAC_OUT2, ADC12_IN5. |+| 22 | PA6 | bidirectional | General-purpose I/O pin; alternate functions SPI1_MISO, ADC12_IN6, TIM3_CH1; remap function TIM1_BKIN. |+| 23 | PA7 | bidirectional | 5V-tolerant general-purpose I/O; default functions SPI1_MOSI, ADC12_IN7, TIM3_CH2, Ethernet; remap function TIM1_CH1N. |+| 24 | PC4 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN14, ETH_MII_RXD0, ETH_RMII_RXD0. |+| 25 | PC5 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN15, ETH_MII_RXD1, ETH_RMII_RXD1. |+| 26 | PB0 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN8, TIM3_CH3, Ethernet; remap function TIM1_CH2N. |+| 27 | PB1 | bidirectional | General-purpose I/O pin; alternate functions ADC12_IN9, TIM3_CH4, Ethernet; remap function TIM1_CH3N. |+| 28 | PB2 | bidirectional | 5V-tolerant general-purpose I/O; main function PB2/BOOT1 (boot pin). |+| 29 | PB10 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions I2C2_SCL, USART3_TX, Ethernet; remap function TIM2_CH3. |+| 30 | PB11 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions I2C2_SDA, USART3_RX, Ethernet TX_EN; remap function TIM2_CH4. |+| 31 | VSS_1 | power_in | Ground connection. |+| 32 | VDD_1 | power_in | Main power supply 2.0 to 3.6 V. |+| 33 | PB12 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, Ethernet TXD0. |+| 34 | PB13 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, Ethernet TXD1. |+| 35 | PB14 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS. |+| 36 | PB15 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N. |+| 37 | PC6 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions I2S2_MCK, TIM3_CH1. |+| 38 | PC7 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions I2S3_MCK, TIM3_CH2. |+| 39 | PC8 | bidirectional | 5V-tolerant general-purpose I/O; remap function TIM3_CH3. |+| 40 | PC9 | bidirectional | 5V-tolerant general-purpose I/O; remap function TIM3_CH4. |+| 41 | PA8 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions USART1_CK, OTG_FS_SOF, TIM1_CH1, MCO (main clock output). |+| 42 | PA9 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions USART1_TX, TIM1_CH2, OTG_FS_VBUS. |+| 43 | PA10 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID. |+| 44 | PA11 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM. |+| 45 | PA12 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions USART1_RTS, OTG_FS_DP, CAN1_TX, TIM1_ETR. |+| 46 | PA13 | bidirectional | 5V-tolerant SWDIO debug port (JTMS); after remap: PA13 general-purpose I/O. |+| 47 | VSS_2 | power_in | Ground connection. |+| 48 | VDD_2 | power_in | Main power supply 2.0 to 3.6 V. |+| 49 | PA14 | bidirectional | 5V-tolerant SWCLK debug port (JTCK); after remap: PA14 general-purpose I/O. |+| 50 | PA15 | bidirectional | 5V-tolerant JTDI debug port; remap functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, PA15. |+| 51 | PC10 | bidirectional | 5V-tolerant general-purpose I/O; default function UART4_TX; remap functions USART3_TX, SPI3_SCK, I2S3_CK. |+| 52 | PC11 | bidirectional | 5V-tolerant general-purpose I/O; default function UART4_RX; remap functions USART3_RX, SPI3_MISO. |+| 53 | PC12 | bidirectional | 5V-tolerant general-purpose I/O; default function UART5_TX; remap functions USART3_CK, SPI3_MOSI, I2S3_SD. |+| 54 | PD2 | bidirectional | 5V-tolerant general-purpose I/O; alternate functions TIM3_ETR, UART5_RX. |+| 55 | PB3 | bidirectional | 5V-tolerant JTDO debug port; remap functions SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, TRACESWO. |+| 56 | PB4 | bidirectional | 5V-tolerant NJTRST debug port; remap functions SPI3_MISO, TIM3_CH1, SPI1_MISO. |+| 57 | PB5 | bidirectional | General-purpose I/O; alternate functions I2C1_SMBA, SPI3_MOSI, Ethernet PPS_OUT, I2S3_SD; remap functions TIM3_CH2, SPI1_MOSI, CAN2_RX. |+| 58 | PB6 | bidirectional | 5V-tolerant general-purpose I/O; default functions I2C1_SCL, TIM4_CH1; remap functions USART1_TX, CAN2_TX. |+| 59 | PB7 | bidirectional | 5V-tolerant general-purpose I/O; default functions I2C1_SDA, TIM4_CH2; remap function USART1_RX. |+| 60 | BOOT0 | input | Boot pin to select boot from flash (low) or system memory/SRAM (high) after reset. |+| 61 | PB8 | bidirectional | 5V-tolerant general-purpose I/O; default functions TIM4_CH3, Ethernet TXD3; remap functions I2C1_SCL, CAN1_RX. |+| 62 | PB9 | bidirectional | 5V-tolerant general-purpose I/O; default function TIM4_CH4; remap functions I2C1_SDA, CAN1_TX. |+| 63 | VSS_3 | power_in | Ground connection. |+| 64 | VDD_3 | power_in | Main power supply 2.0 to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F105RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f105rbt6-etched.step` / `stm32f105rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f105rbt6.step` / `stm32f105rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172461897826304) (104 pp, sha256 `04f979ad6ea16a85`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f105rbt6-datasheet.pdf)
page.jsonadded+493
@@ -0,0 +1,493 @@+{+  "slug": "stm32f105rbt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f105rbt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f105rbt6.kicad_sym",+    "stm32f105rbt6.kicad_mod",+    "stm32f105rbt6.glb",+    "stm32f105rbt6.step",+    "stm32f105rbt6.lbr",+    "docs/hero.png",+    "docs/stm32f105rbt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F105RBT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172461897826304",+    "parts": {+      "symbol": "stm32f105rbt6.kicad_sym",+      "footprint": "stm32f105rbt6.kicad_mod",+      "model_3d": "stm32f105rbt6-etched.glb",+      "model_3d_plain": "stm32f105rbt6.glb",+      "model_3d_step": "stm32f105rbt6-etched.step",+      "model_3d_step_plain": "stm32f105rbt6.step",+      "lbr": "stm32f105rbt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C8349",+      "digikey": "497-8920-ND",+      "mouser": "511-STM32F105RBT6"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T13:49:05Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-8920-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F105RBT6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply 1.8 to 3.6 V for RTC, backup registers, and external 32 kHz oscillator."+      },+      {+        "number": "2",+        "name": "PC13-TAMPER-RTC",+        "type": "bidirectional",+        "description": "General-purpose I/O pin, can be configured as TAMPER-RTC function (supplied through power switch)."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "input",+        "description": "32.768 kHz oscillator input pin (supplied through power switch)."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "output",+        "description": "32.768 kHz oscillator output pin (supplied through power switch)."+      },+      {+        "number": "5",+        "name": "OSC_IN",+        "type": "input",+        "description": "Main oscillator input for 3-25 MHz crystal/ceramic resonator; PD0 after software remap."+      },+      {+        "number": "6",+        "name": "OSC_OUT",+        "type": "output",+        "description": "Main oscillator output; PD1 after software remap."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "input",+        "description": "Active low external reset pin with internal pull-up and filtering."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate function ADC12_IN10."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN11, ETH_MII_MDC, ETH_RMII_MDC."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN12, ETH_MII_TXD2."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN13, ETH_MII_TX_CLK."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground for ADC, DAC, temperature sensor, and PLL/RC oscillators."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply 2.4 to 3.6 V for ADC, DAC, and analog circuits (minimum 2.4 V when ADC used)."+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "General-purpose I/O with wakeup from Stop/Standby; alternate functions USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1, Ethernet."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions USART2_RTS, ADC12_IN1, TIM5_CH2, TIM2_CH2, Ethernet."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions USART2_TX, TIM5_CH3, ADC12_IN2, TIM2_CH3, Ethernet."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions USART2_RX, TIM5_CH4, ADC12_IN3, TIM2_CH4, Ethernet."+      },+      {+        "number": "18",+        "name": "VSS_4",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "19",+        "name": "VDD_4",+        "type": "power_in",+        "description": "Main power supply 2.0 to 3.6 V."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; default functions SPI1_NSS, DAC_OUT1, USART2_CK, ADC12_IN4; remap functions SPI3_NSS, I2S3_WS."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions SPI1_SCK, DAC_OUT2, ADC12_IN5."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions SPI1_MISO, ADC12_IN6, TIM3_CH1; remap function TIM1_BKIN."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default functions SPI1_MOSI, ADC12_IN7, TIM3_CH2, Ethernet; remap function TIM1_CH1N."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN14, ETH_MII_RXD0, ETH_RMII_RXD0."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN15, ETH_MII_RXD1, ETH_RMII_RXD1."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN8, TIM3_CH3, Ethernet; remap function TIM1_CH2N."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "General-purpose I/O pin; alternate functions ADC12_IN9, TIM3_CH4, Ethernet; remap function TIM1_CH3N."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; main function PB2/BOOT1 (boot pin)."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions I2C2_SCL, USART3_TX, Ethernet; remap function TIM2_CH3."+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions I2C2_SDA, USART3_RX, Ethernet TX_EN; remap function TIM2_CH4."+      },+      {+        "number": "31",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "32",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Main power supply 2.0 to 3.6 V."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, Ethernet TXD0."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, Ethernet TXD1."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions I2S2_MCK, TIM3_CH1."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions I2S3_MCK, TIM3_CH2."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; remap function TIM3_CH3."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; remap function TIM3_CH4."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions USART1_CK, OTG_FS_SOF, TIM1_CH1, MCO (main clock output)."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions USART1_TX, TIM1_CH2, OTG_FS_VBUS."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions USART1_RTS, OTG_FS_DP, CAN1_TX, TIM1_ETR."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant SWDIO debug port (JTMS); after remap: PA13 general-purpose I/O."+      },+      {+        "number": "47",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "48",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Main power supply 2.0 to 3.6 V."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant SWCLK debug port (JTCK); after remap: PA14 general-purpose I/O."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant JTDI debug port; remap functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, PA15."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default function UART4_TX; remap functions USART3_TX, SPI3_SCK, I2S3_CK."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default function UART4_RX; remap functions USART3_RX, SPI3_MISO."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default function UART5_TX; remap functions USART3_CK, SPI3_MOSI, I2S3_SD."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; alternate functions TIM3_ETR, UART5_RX."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant JTDO debug port; remap functions SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, TRACESWO."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant NJTRST debug port; remap functions SPI3_MISO, TIM3_CH1, SPI1_MISO."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "General-purpose I/O; alternate functions I2C1_SMBA, SPI3_MOSI, Ethernet PPS_OUT, I2S3_SD; remap functions TIM3_CH2, SPI1_MOSI, CAN2_RX."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default functions I2C1_SCL, TIM4_CH1; remap functions USART1_TX, CAN2_TX."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default functions I2C1_SDA, TIM4_CH2; remap function USART1_RX."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot pin to select boot from flash (low) or system memory/SRAM (high) after reset."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default functions TIM4_CH3, Ethernet TXD3; remap functions I2C1_SCL, CAN1_RX."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant general-purpose I/O; default function TIM4_CH4; remap functions I2C1_SDA, CAN1_TX."+      },+      {+        "number": "63",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "64",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Main power supply 2.0 to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 5-6 (OSC_IN/OSC_OUT) in LQFP64 are configured as main oscillator pins after reset but can be re; Pins 46, 49, 50, 55, 56 are JTAG/SWD debug interface pins (PA13/SWDIO, PA14/SWCLK, PA15/JTDI, PB3/JT; VREF+/VREF- analog reference pins are not available on LQFP64 package; VREF+ is internally connected"+        ],+        "pages_sent": 104,+        "cost_usd": 1.54,+        "at": "2026-09-26T13:48:38"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172461897826304",+        "pages": 104,+        "sha256": "04f979ad6ea16a85",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file