Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F105RBT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32F105RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply 1.8 to 3.6 V for RTC, backup registers, and external 32 kHz oscillator.
2 PC13-TAMPER-RTC bidirectional General-purpose I/O pin, can be configured as TAMPER-RTC function (supplied through power switch).
3 PC14-OSC32_IN input 32.768 kHz oscillator input pin (supplied through power switch).
4 PC15-OSC32_OUT output 32.768 kHz oscillator output pin (supplied through power switch).
5 OSC_IN input Main oscillator input for 3-25 MHz crystal/ceramic resonator; PD0 after software remap.
6 OSC_OUT output Main oscillator output; PD1 after software remap.
7 NRST input Active low external reset pin with internal pull-up and filtering.
8 PC0 bidirectional General-purpose I/O pin; alternate function ADC12_IN10.
9 PC1 bidirectional General-purpose I/O pin; alternate functions ADC12_IN11, ETH_MII_MDC, ETH_RMII_MDC.
10 PC2 bidirectional General-purpose I/O pin; alternate functions ADC12_IN12, ETH_MII_TXD2.
11 PC3 bidirectional General-purpose I/O pin; alternate functions ADC12_IN13, ETH_MII_TX_CLK.
12 VSSA power_in Analog ground for ADC, DAC, temperature sensor, and PLL/RC oscillators.
13 VDDA power_in Analog power supply 2.4 to 3.6 V for ADC, DAC, and analog circuits (minimum 2.4 V when ADC used).
14 PA0-WKUP bidirectional General-purpose I/O with wakeup from Stop/Standby; alternate functions USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1, Ethernet.
15 PA1 bidirectional General-purpose I/O pin; alternate functions USART2_RTS, ADC12_IN1, TIM5_CH2, TIM2_CH2, Ethernet.
16 PA2 bidirectional General-purpose I/O pin; alternate functions USART2_TX, TIM5_CH3, ADC12_IN2, TIM2_CH3, Ethernet.
17 PA3 bidirectional General-purpose I/O pin; alternate functions USART2_RX, TIM5_CH4, ADC12_IN3, TIM2_CH4, Ethernet.
18 VSS_4 power_in Ground connection.
19 VDD_4 power_in Main power supply 2.0 to 3.6 V.
20 PA4 bidirectional General-purpose I/O pin; default functions SPI1_NSS, DAC_OUT1, USART2_CK, ADC12_IN4; remap functions SPI3_NSS, I2S3_WS.
21 PA5 bidirectional General-purpose I/O pin; alternate functions SPI1_SCK, DAC_OUT2, ADC12_IN5.
22 PA6 bidirectional General-purpose I/O pin; alternate functions SPI1_MISO, ADC12_IN6, TIM3_CH1; remap function TIM1_BKIN.
23 PA7 bidirectional 5V-tolerant general-purpose I/O; default functions SPI1_MOSI, ADC12_IN7, TIM3_CH2, Ethernet; remap function TIM1_CH1N.
24 PC4 bidirectional General-purpose I/O pin; alternate functions ADC12_IN14, ETH_MII_RXD0, ETH_RMII_RXD0.
25 PC5 bidirectional General-purpose I/O pin; alternate functions ADC12_IN15, ETH_MII_RXD1, ETH_RMII_RXD1.
26 PB0 bidirectional General-purpose I/O pin; alternate functions ADC12_IN8, TIM3_CH3, Ethernet; remap function TIM1_CH2N.
27 PB1 bidirectional General-purpose I/O pin; alternate functions ADC12_IN9, TIM3_CH4, Ethernet; remap function TIM1_CH3N.
28 PB2 bidirectional 5V-tolerant general-purpose I/O; main function PB2/BOOT1 (boot pin).
29 PB10 bidirectional 5V-tolerant general-purpose I/O; alternate functions I2C2_SCL, USART3_TX, Ethernet; remap function TIM2_CH3.
30 PB11 bidirectional 5V-tolerant general-purpose I/O; alternate functions I2C2_SDA, USART3_RX, Ethernet TX_EN; remap function TIM2_CH4.
31 VSS_1 power_in Ground connection.
32 VDD_1 power_in Main power supply 2.0 to 3.6 V.
33 PB12 bidirectional 5V-tolerant general-purpose I/O; alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, Ethernet TXD0.
34 PB13 bidirectional 5V-tolerant general-purpose I/O; alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, Ethernet TXD1.
35 PB14 bidirectional 5V-tolerant general-purpose I/O; alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS.
36 PB15 bidirectional 5V-tolerant general-purpose I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N.
37 PC6 bidirectional 5V-tolerant general-purpose I/O; alternate functions I2S2_MCK, TIM3_CH1.
38 PC7 bidirectional 5V-tolerant general-purpose I/O; alternate functions I2S3_MCK, TIM3_CH2.
39 PC8 bidirectional 5V-tolerant general-purpose I/O; remap function TIM3_CH3.
40 PC9 bidirectional 5V-tolerant general-purpose I/O; remap function TIM3_CH4.
41 PA8 bidirectional 5V-tolerant general-purpose I/O; alternate functions USART1_CK, OTG_FS_SOF, TIM1_CH1, MCO (main clock output).
42 PA9 bidirectional 5V-tolerant general-purpose I/O; alternate functions USART1_TX, TIM1_CH2, OTG_FS_VBUS.
43 PA10 bidirectional 5V-tolerant general-purpose I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID.
44 PA11 bidirectional 5V-tolerant general-purpose I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM.
45 PA12 bidirectional 5V-tolerant general-purpose I/O; alternate functions USART1_RTS, OTG_FS_DP, CAN1_TX, TIM1_ETR.
46 PA13 bidirectional 5V-tolerant SWDIO debug port (JTMS); after remap: PA13 general-purpose I/O.
47 VSS_2 power_in Ground connection.
48 VDD_2 power_in Main power supply 2.0 to 3.6 V.
49 PA14 bidirectional 5V-tolerant SWCLK debug port (JTCK); after remap: PA14 general-purpose I/O.
50 PA15 bidirectional 5V-tolerant JTDI debug port; remap functions SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, PA15.
51 PC10 bidirectional 5V-tolerant general-purpose I/O; default function UART4_TX; remap functions USART3_TX, SPI3_SCK, I2S3_CK.
52 PC11 bidirectional 5V-tolerant general-purpose I/O; default function UART4_RX; remap functions USART3_RX, SPI3_MISO.
53 PC12 bidirectional 5V-tolerant general-purpose I/O; default function UART5_TX; remap functions USART3_CK, SPI3_MOSI, I2S3_SD.
54 PD2 bidirectional 5V-tolerant general-purpose I/O; alternate functions TIM3_ETR, UART5_RX.
55 PB3 bidirectional 5V-tolerant JTDO debug port; remap functions SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, TRACESWO.
56 PB4 bidirectional 5V-tolerant NJTRST debug port; remap functions SPI3_MISO, TIM3_CH1, SPI1_MISO.
57 PB5 bidirectional General-purpose I/O; alternate functions I2C1_SMBA, SPI3_MOSI, Ethernet PPS_OUT, I2S3_SD; remap functions TIM3_CH2, SPI1_MOSI, CAN2_RX.
58 PB6 bidirectional 5V-tolerant general-purpose I/O; default functions I2C1_SCL, TIM4_CH1; remap functions USART1_TX, CAN2_TX.
59 PB7 bidirectional 5V-tolerant general-purpose I/O; default functions I2C1_SDA, TIM4_CH2; remap function USART1_RX.
60 BOOT0 input Boot pin to select boot from flash (low) or system memory/SRAM (high) after reset.
61 PB8 bidirectional 5V-tolerant general-purpose I/O; default functions TIM4_CH3, Ethernet TXD3; remap functions I2C1_SCL, CAN1_RX.
62 PB9 bidirectional 5V-tolerant general-purpose I/O; default function TIM4_CH4; remap functions I2C1_SDA, CAN1_TX.
63 VSS_3 power_in Ground connection.
64 VDD_3 power_in Main power supply 2.0 to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32F105RBT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f105rbt6-etched.step / stm32f105rbt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f105rbt6.step / stm32f105rbt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (104 pp, sha256 04f979ad6ea16a85, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF