component
STM32F103VET6TR
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32F103VET6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32F103VET6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | input | GPIO port E pin 2, 5V tolerant, TRACED clock or FSMC address A23. |+| 2 | PE3 | input | GPIO port E pin 3, 5V tolerant, TRACED data 0 or FSMC address A19. |+| 3 | PE4 | input | GPIO port E pin 4, 5V tolerant, TRACED data 1 or FSMC address A20. |+| 4 | PE5 | input | GPIO port E pin 5, 5V tolerant, TRACED data 2 or FSMC address A21. |+| 5 | PE6 | input | GPIO port E pin 6, 5V tolerant, TRACED data 3 or FSMC address A22. |+| 6 | VBAT | power_in | Battery backup supply for RTC and backup registers, 1.8 to 3.6 V. |+| 7 | PC13-TAMPER-RTC | input | GPIO port C pin 13, tamper or RTC output, limited to 2 MHz switching frequency. |+| 8 | PC14-OSC32_IN | input | GPIO port C pin 14, 32 kHz oscillator input for RTC. |+| 9 | PC15-OSC32_OUT | output | GPIO port C pin 15, 32 kHz oscillator output. |+| 10 | VSS_5 | power_in | Ground connection. |+| 11 | VDD_5 | power_in | Digital supply +3.3 V nominal. |+| 12 | OSC_IN | input | High-speed external oscillator input, 4 to 16 MHz crystal or clock source. |+| 13 | OSC_OUT | output | High-speed external oscillator output for crystal/resonator. |+| 14 | NRST | input | External reset input, active low, with internal filtering and pull-up resistor. |+| 15 | PC0 | input | GPIO port C pin 0, ADC123_IN10 input channel. |+| 16 | PC1 | input | GPIO port C pin 1, ADC123_IN11 input channel. |+| 17 | PC2 | input | GPIO port C pin 2, ADC123_IN12 input channel. |+| 18 | PC3 | input | GPIO port C pin 3, ADC123_IN13 input channel. |+| 19 | VSSA | power_in | Analog ground for ADC, DAC, and reset circuits. |+| 20 | VREF- | power_in | Negative reference voltage for ADC, typically connected to VSSA. |+| 21 | VREF+ | power_in | Positive reference voltage for ADC, 2.4 to VDDA. |+| 22 | VDDA | power_in | Analog supply voltage, 2.4 to 3.6 V, must be within 300 mV of VDD. |+| 23 | PA0-WKUP | input | GPIO port A pin 0, wakeup pin, USART2_CTS or ADC123_IN0 channel. |+| 24 | PA1 | input | GPIO port A pin 1, USART2_RTS or ADC123_IN1 channel. |+| 25 | PA2 | input | GPIO port A pin 2, USART2_TX or ADC123_IN2 channel. |+| 26 | PA3 | input | GPIO port A pin 3, USART2_RX or ADC123_IN3 channel. |+| 27 | VSS_4 | power_in | Ground connection. |+| 28 | VDD_4 | power_in | Digital supply +3.3 V nominal. |+| 29 | PA4 | input | GPIO port A pin 4, SPI1_NSS or DAC_OUT1 or ADC12_IN4 channel. |+| 30 | PA5 | input | GPIO port A pin 5, SPI1_SCK or DAC_OUT2 or ADC12_IN5 channel. |+| 31 | PA6 | input | GPIO port A pin 6, SPI1_MISO, TIM3_CH1 or TIM1_BKIN or ADC12_IN6 channel. |+| 32 | PA7 | input | GPIO port A pin 7, SPI1_MOSI, TIM3_CH2 or TIM1_CH1N or ADC12_IN7 channel. |+| 33 | PC4 | input | GPIO port C pin 4, ADC12_IN14 input channel. |+| 34 | PC5 | input | GPIO port C pin 5, ADC12_IN15 input channel. |+| 35 | PB0 | input | GPIO port B pin 0, TIM3_CH3, TIM1_CH2N or ADC12_IN8 channel. |+| 36 | PB1 | input | GPIO port B pin 1, TIM3_CH4, TIM1_CH3N or ADC12_IN9 channel. |+| 37 | PB2-BOOT1 | input | GPIO port B pin 2, 5V tolerant, boot configuration pin. |+| 38 | PE7 | input | GPIO port E pin 7, 5V tolerant, FSMC data D4 or TIM1_ETR. |+| 39 | PE8 | input | GPIO port E pin 8, 5V tolerant, FSMC data D5 or TIM1_CH1N. |+| 40 | PE9 | input | GPIO port E pin 9, 5V tolerant, FSMC data D6 or TIM1_CH1. |+| 41 | PE10 | input | GPIO port E pin 10, 5V tolerant, FSMC data D7 or TIM1_CH2N. |+| 42 | PE11 | input | GPIO port E pin 11, 5V tolerant, FSMC data D8 or TIM1_CH2. |+| 43 | PE12 | input | GPIO port E pin 12, 5V tolerant, FSMC data D9 or TIM1_CH3N. |+| 44 | PE13 | input | GPIO port E pin 13, 5V tolerant, FSMC data D10 or TIM1_CH3. |+| 45 | PE14 | input | GPIO port E pin 14, 5V tolerant, FSMC data D11 or TIM1_CH4. |+| 46 | PE15 | input | GPIO port E pin 15, 5V tolerant, FSMC data D12 or TIM1_BKIN. |+| 47 | PB10 | input | GPIO port B pin 10, 5V tolerant, I2C2_SCL or USART3_TX or TIM2_CH3. |+| 48 | PB11 | input | GPIO port B pin 11, 5V tolerant, I2C2_SDA or USART3_RX or TIM2_CH4. |+| 49 | VSS_1 | power_in | Ground connection. |+| 50 | VDD_1 | power_in | Digital supply +3.3 V nominal. |+| 51 | PB12 | input | GPIO port B pin 12, 5V tolerant, SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK or TIM1_BKIN. |+| 52 | PB13 | input | GPIO port B pin 13, 5V tolerant, SPI2_SCK, I2S2_CK, USART3_CTS or TIM1_CH1N. |+| 53 | PB14 | input | GPIO port B pin 14, 5V tolerant, SPI2_MISO, TIM1_CH2N or USART3_RTS. |+| 54 | PB15 | input | GPIO port B pin 15, 5V tolerant, SPI2_MOSI, I2S2_SD or TIM1_CH3N. |+| 55 | PD8 | input | GPIO port D pin 8, 5V tolerant, FSMC data D13 or USART3_TX. |+| 56 | PD9 | input | GPIO port D pin 9, 5V tolerant, FSMC data D14 or USART3_RX. |+| 57 | PD10 | input | GPIO port D pin 10, 5V tolerant, FSMC data D15 or USART3_CK. |+| 58 | PD11 | input | GPIO port D pin 11, 5V tolerant, FSMC address A16 or USART3_CTS. |+| 59 | PD12 | input | GPIO port D pin 12, 5V tolerant, FSMC address A17, TIM4_CH1 or USART3_RTS. |+| 60 | PD13 | input | GPIO port D pin 13, 5V tolerant, FSMC address A18 or TIM4_CH2. |+| 61 | PD14 | input | GPIO port D pin 14, 5V tolerant, FSMC data D0 or TIM4_CH3. |+| 62 | PD15 | input | GPIO port D pin 15, 5V tolerant, FSMC data D1 or TIM4_CH4. |+| 63 | PC6 | input | GPIO port C pin 6, 5V tolerant, I2S2_MCK, TIM8_CH1, SDIO_D6 or TIM3_CH1. |+| 64 | PC7 | input | GPIO port C pin 7, 5V tolerant, I2S3_MCK, TIM8_CH2, SDIO_D7 or TIM3_CH2. |+| 65 | PC8 | input | GPIO port C pin 8, 5V tolerant, TIM8_CH3, SDIO_D0 or TIM3_CH3. |+| 66 | PC9 | input | GPIO port C pin 9, 5V tolerant, TIM8_CH4, SDIO_D1 or TIM3_CH4. |+| 67 | PA8 | input | GPIO port A pin 8, 5V tolerant, USART1_CK, TIM1_CH1 or MCO clock output. |+| 68 | PA9 | input | GPIO port A pin 9, 5V tolerant, USART1_TX or TIM1_CH2. |+| 69 | PA10 | input | GPIO port A pin 10, 5V tolerant, USART1_RX or TIM1_CH3. |+| 70 | PA11 | input | GPIO port A pin 11, 5V tolerant, USART1_CTS, USB_DM, CAN_RX or TIM1_CH4. |+| 71 | PA12 | input | GPIO port A pin 12, 5V tolerant, USART1_RTS, USB_DP, CAN_TX or TIM1_ETR. |+| 72 | PA13 | input | GPIO port A pin 13, 5V tolerant, JTMS or SWDIO debug interface. |+| 73 | VSS_2 | power_in | Ground connection. |+| 74 | VDD_2 | power_in | Digital supply +3.3 V nominal. |+| 75 | PA14 | input | GPIO port A pin 14, 5V tolerant, JTCK or SWCLK debug interface. |+| 76 | PA15 | input | GPIO port A pin 15, 5V tolerant, JTDI, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR or SPI1_NSS. |+| 77 | PC10 | input | GPIO port C pin 10, 5V tolerant, UART4_TX, SDIO_D2 or USART3_TX. |+| 78 | PC11 | input | GPIO port C pin 11, 5V tolerant, UART4_RX, SDIO_D3 or USART3_RX. |+| 79 | PC12 | input | GPIO port C pin 12, 5V tolerant, UART5_TX, SDIO_CK or USART3_CK. |+| 80 | PD0 | input | GPIO port D pin 0, 5V tolerant, OSC_IN (remappable), FSMC_D2 or CAN_RX. |+| 81 | PD1 | input | GPIO port D pin 1, 5V tolerant, OSC_OUT (remappable), FSMC_D3 or CAN_TX. |+| 82 | PD2 | input | GPIO port D pin 2, 5V tolerant, TIM3_ETR, UART5_RX or SDIO_CMD. |+| 83 | PD3 | input | GPIO port D pin 3, 5V tolerant, FSMC_CLK or USART2_CTS. |+| 84 | PD4 | input | GPIO port D pin 4, 5V tolerant, FSMC_NOE or USART2_RTS. |+| 85 | PD5 | input | GPIO port D pin 5, 5V tolerant, FSMC_NWE or USART2_TX. |+| 86 | PD6 | input | GPIO port D pin 6, 5V tolerant, FSMC_NWAIT or USART2_RX. |+| 87 | PD7 | input | GPIO port D pin 7, 5V tolerant, FSMC_NE1 or USART2_CK. |+| 88 | PB3 | input | GPIO port B pin 3, 5V tolerant, JTDO, SPI3_SCK, I2S3_CK, TRACESWO or TIM2_CH2 or SPI1_SCK. |+| 89 | PB4 | input | GPIO port B pin 4, 5V tolerant, NJTRST, SPI3_MISO, PB4 or TIM3_CH1 or SPI1_MISO. |+| 90 | PB5 | input | GPIO port B pin 5, I2C1_SMBA, SPI3_MOSI, I2S3_SD or TIM3_CH2 or SPI1_MOSI. |+| 91 | PB6 | input | GPIO port B pin 6, 5V tolerant, I2C1_SCL or TIM4_CH1 or USART1_TX. |+| 92 | PB7 | input | GPIO port B pin 7, 5V tolerant, I2C1_SDA, FSMC_NADV or TIM4_CH2 or USART1_RX. |+| 93 | BOOT0 | input | Boot configuration input pin, selects boot from Flash or system memory at reset. |+| 94 | PB8 | input | GPIO port B pin 8, 5V tolerant, TIM4_CH3, SDIO_D4 or I2C1_SCL or CAN_RX. |+| 95 | PB9 | input | GPIO port B pin 9, 5V tolerant, TIM4_CH4, SDIO_D5 or I2C1_SDA or CAN_TX. |+| 96 | PE0 | input | GPIO port E pin 0, 5V tolerant, TIM4_ETR or FSMC_NBL0. |+| 97 | PE1 | input | GPIO port E pin 1, 5V tolerant, FSMC_NBL1. |+| 98 | VSS_3 | power_in | Ground connection. |+| 99 | VDD_3 | power_in | Digital supply +3.3 V nominal. |+| 100 | VDD_3 | power_in | Digital supply +3.3 V nominal. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32F103VET6TR`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32f103vet6tr-etched.step` / `stm32f103vet6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f103vet6tr.step` / `stm32f103vet6tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589837906455134208) (143 pp, sha256 `f69f74092e544134`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f103vet6tr-datasheet.pdf)
page.jsonadded+694@@ -0,0 +1,694 @@+{+ "slug": "stm32f103vet6tr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f103vet6tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f103vet6tr.kicad_sym",+ "stm32f103vet6tr.kicad_mod",+ "stm32f103vet6tr.glb",+ "stm32f103vet6tr.step",+ "stm32f103vet6tr.lbr",+ "docs/hero.png",+ "docs/stm32f103vet6tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F103VET6TR",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589837906455134208",+ "parts": {+ "symbol": "stm32f103vet6tr.kicad_sym",+ "footprint": "stm32f103vet6tr.kicad_mod",+ "model_3d": "stm32f103vet6tr-etched.glb",+ "model_3d_plain": "stm32f103vet6tr.glb",+ "model_3d_step": "stm32f103vet6tr-etched.step",+ "model_3d_step_plain": "stm32f103vet6tr.step",+ "lbr": "stm32f103vet6tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2969762",+ "digikey": "497-17394-2-ND",+ "mouser": "511-STM32F103VET6TR"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T14:28:13Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-17394-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F103VET6TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "input",+ "description": "GPIO port E pin 2, 5V tolerant, TRACED clock or FSMC address A23."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "input",+ "description": "GPIO port E pin 3, 5V tolerant, TRACED data 0 or FSMC address A19."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "input",+ "description": "GPIO port E pin 4, 5V tolerant, TRACED data 1 or FSMC address A20."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "input",+ "description": "GPIO port E pin 5, 5V tolerant, TRACED data 2 or FSMC address A21."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "input",+ "description": "GPIO port E pin 6, 5V tolerant, TRACED data 3 or FSMC address A22."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup supply for RTC and backup registers, 1.8 to 3.6 V."+ },+ {+ "number": "7",+ "name": "PC13-TAMPER-RTC",+ "type": "input",+ "description": "GPIO port C pin 13, tamper or RTC output, limited to 2 MHz switching frequency."+ },+ {+ "number": "8",+ "name": "PC14-OSC32_IN",+ "type": "input",+ "description": "GPIO port C pin 14, 32 kHz oscillator input for RTC."+ },+ {+ "number": "9",+ "name": "PC15-OSC32_OUT",+ "type": "output",+ "description": "GPIO port C pin 15, 32 kHz oscillator output."+ },+ {+ "number": "10",+ "name": "VSS_5",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "11",+ "name": "VDD_5",+ "type": "power_in",+ "description": "Digital supply +3.3 V nominal."+ },+ {+ "number": "12",+ "name": "OSC_IN",+ "type": "input",+ "description": "High-speed external oscillator input, 4 to 16 MHz crystal or clock source."+ },+ {+ "number": "13",+ "name": "OSC_OUT",+ "type": "output",+ "description": "High-speed external oscillator output for crystal/resonator."+ },+ {+ "number": "14",+ "name": "NRST",+ "type": "input",+ "description": "External reset input, active low, with internal filtering and pull-up resistor."+ },+ {+ "number": "15",+ "name": "PC0",+ "type": "input",+ "description": "GPIO port C pin 0, ADC123_IN10 input channel."+ },+ {+ "number": "16",+ "name": "PC1",+ "type": "input",+ "description": "GPIO port C pin 1, ADC123_IN11 input channel."+ },+ {+ "number": "17",+ "name": "PC2",+ "type": "input",+ "description": "GPIO port C pin 2, ADC123_IN12 input channel."+ },+ {+ "number": "18",+ "name": "PC3",+ "type": "input",+ "description": "GPIO port C pin 3, ADC123_IN13 input channel."+ },+ {+ "number": "19",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground for ADC, DAC, and reset circuits."+ },+ {+ "number": "20",+ "name": "VREF-",+ "type": "power_in",+ "description": "Negative reference voltage for ADC, typically connected to VSSA."+ },+ {+ "number": "21",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage for ADC, 2.4 to VDDA."+ },+ {+ "number": "22",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply voltage, 2.4 to 3.6 V, must be within 300 mV of VDD."+ },+ {+ "number": "23",+ "name": "PA0-WKUP",+ "type": "input",+ "description": "GPIO port A pin 0, wakeup pin, USART2_CTS or ADC123_IN0 channel."+ },+ {+ "number": "24",+ "name": "PA1",+ "type": "input",+ "description": "GPIO port A pin 1, USART2_RTS or ADC123_IN1 channel."+ },+ {+ "number": "25",+ "name": "PA2",+ "type": "input",+ "description": "GPIO port A pin 2, USART2_TX or ADC123_IN2 channel."+ },+ {+ "number": "26",+ "name": "PA3",+ "type": "input",+ "description": "GPIO port A pin 3, USART2_RX or ADC123_IN3 channel."+ },+ {+ "number": "27",+ "name": "VSS_4",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "28",+ "name": "VDD_4",+ "type": "power_in",+ "description": "Digital supply +3.3 V nominal."+ },+ {+ "number": "29",+ "name": "PA4",+ "type": "input",+ "description": "GPIO port A pin 4, SPI1_NSS or DAC_OUT1 or ADC12_IN4 channel."+ },+ {+ "number": "30",+ "name": "PA5",+ "type": "input",+ "description": "GPIO port A pin 5, SPI1_SCK or DAC_OUT2 or ADC12_IN5 channel."+ },+ {+ "number": "31",+ "name": "PA6",+ "type": "input",+ "description": "GPIO port A pin 6, SPI1_MISO, TIM3_CH1 or TIM1_BKIN or ADC12_IN6 channel."+ },+ {+ "number": "32",+ "name": "PA7",+ "type": "input",+ "description": "GPIO port A pin 7, SPI1_MOSI, TIM3_CH2 or TIM1_CH1N or ADC12_IN7 channel."+ },+ {+ "number": "33",+ "name": "PC4",+ "type": "input",+ "description": "GPIO port C pin 4, ADC12_IN14 input channel."+ },+ {+ "number": "34",+ "name": "PC5",+ "type": "input",+ "description": "GPIO port C pin 5, ADC12_IN15 input channel."+ },+ {+ "number": "35",+ "name": "PB0",+ "type": "input",+ "description": "GPIO port B pin 0, TIM3_CH3, TIM1_CH2N or ADC12_IN8 channel."+ },+ {+ "number": "36",+ "name": "PB1",+ "type": "input",+ "description": "GPIO port B pin 1, TIM3_CH4, TIM1_CH3N or ADC12_IN9 channel."+ },+ {+ "number": "37",+ "name": "PB2-BOOT1",+ "type": "input",+ "description": "GPIO port B pin 2, 5V tolerant, boot configuration pin."+ },+ {+ "number": "38",+ "name": "PE7",+ "type": "input",+ "description": "GPIO port E pin 7, 5V tolerant, FSMC data D4 or TIM1_ETR."+ },+ {+ "number": "39",+ "name": "PE8",+ "type": "input",+ "description": "GPIO port E pin 8, 5V tolerant, FSMC data D5 or TIM1_CH1N."+ },+ {+ "number": "40",+ "name": "PE9",+ "type": "input",+ "description": "GPIO port E pin 9, 5V tolerant, FSMC data D6 or TIM1_CH1."+ },+ {+ "number": "41",+ "name": "PE10",+ "type": "input",+ "description": "GPIO port E pin 10, 5V tolerant, FSMC data D7 or TIM1_CH2N."+ },+ {+ "number": "42",+ "name": "PE11",+ "type": "input",+ "description": "GPIO port E pin 11, 5V tolerant, FSMC data D8 or TIM1_CH2."+ },+ {+ "number": "43",+ "name": "PE12",+ "type": "input",+ "description": "GPIO port E pin 12, 5V tolerant, FSMC data D9 or TIM1_CH3N."+ },+ {+ "number": "44",+ "name": "PE13",+ "type": "input",+ "description": "GPIO port E pin 13, 5V tolerant, FSMC data D10 or TIM1_CH3."+ },+ {+ "number": "45",+ "name": "PE14",+ "type": "input",+ "description": "GPIO port E pin 14, 5V tolerant, FSMC data D11 or TIM1_CH4."+ },+ {+ "number": "46",+ "name": "PE15",+ "type": "input",+ "description": "GPIO port E pin 15, 5V tolerant, FSMC data D12 or TIM1_BKIN."+ },+ {+ "number": "47",+ "name": "PB10",+ "type": "input",+ "description": "GPIO port B pin 10, 5V tolerant, I2C2_SCL or USART3_TX or TIM2_CH3."+ },+ {+ "number": "48",+ "name": "PB11",+ "type": "input",+ "description": "GPIO port B pin 11, 5V tolerant, I2C2_SDA or USART3_RX or TIM2_CH4."+ },+ {+ "number": "49",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "50",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital supply +3.3 V nominal."+ },+ {+ "number": "51",+ "name": "PB12",+ "type": "input",+ "description": "GPIO port B pin 12, 5V tolerant, SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK or TIM1_BKIN."+ },+ {+ "number": "52",+ "name": "PB13",+ "type": "input",+ "description": "GPIO port B pin 13, 5V tolerant, SPI2_SCK, I2S2_CK, USART3_CTS or TIM1_CH1N."+ },+ {+ "number": "53",+ "name": "PB14",+ "type": "input",+ "description": "GPIO port B pin 14, 5V tolerant, SPI2_MISO, TIM1_CH2N or USART3_RTS."+ },+ {+ "number": "54",+ "name": "PB15",+ "type": "input",+ "description": "GPIO port B pin 15, 5V tolerant, SPI2_MOSI, I2S2_SD or TIM1_CH3N."+ },+ {+ "number": "55",+ "name": "PD8",+ "type": "input",+ "description": "GPIO port D pin 8, 5V tolerant, FSMC data D13 or USART3_TX."+ },+ {+ "number": "56",+ "name": "PD9",+ "type": "input",+ "description": "GPIO port D pin 9, 5V tolerant, FSMC data D14 or USART3_RX."+ },+ {+ "number": "57",+ "name": "PD10",+ "type": "input",+ "description": "GPIO port D pin 10, 5V tolerant, FSMC data D15 or USART3_CK."+ },+ {+ "number": "58",+ "name": "PD11",+ "type": "input",+ "description": "GPIO port D pin 11, 5V tolerant, FSMC address A16 or USART3_CTS."+ },+ {+ "number": "59",+ "name": "PD12",+ "type": "input",+ "description": "GPIO port D pin 12, 5V tolerant, FSMC address A17, TIM4_CH1 or USART3_RTS."+ },+ {+ "number": "60",+ "name": "PD13",+ "type": "input",+ "description": "GPIO port D pin 13, 5V tolerant, FSMC address A18 or TIM4_CH2."+ },+ {+ "number": "61",+ "name": "PD14",+ "type": "input",+ "description": "GPIO port D pin 14, 5V tolerant, FSMC data D0 or TIM4_CH3."+ },+ {+ "number": "62",+ "name": "PD15",+ "type": "input",+ "description": "GPIO port D pin 15, 5V tolerant, FSMC data D1 or TIM4_CH4."+ },+ {+ "number": "63",+ "name": "PC6",+ "type": "input",+ "description": "GPIO port C pin 6, 5V tolerant, I2S2_MCK, TIM8_CH1, SDIO_D6 or TIM3_CH1."+ },+ {+ "number": "64",+ "name": "PC7",+ "type": "input",+ "description": "GPIO port C pin 7, 5V tolerant, I2S3_MCK, TIM8_CH2, SDIO_D7 or TIM3_CH2."+ },+ {+ "number": "65",+ "name": "PC8",+ "type": "input",+ "description": "GPIO port C pin 8, 5V tolerant, TIM8_CH3, SDIO_D0 or TIM3_CH3."+ },+ {+ "number": "66",+ "name": "PC9",+ "type": "input",+ "description": "GPIO port C pin 9, 5V tolerant, TIM8_CH4, SDIO_D1 or TIM3_CH4."+ },+ {+ "number": "67",+ "name": "PA8",+ "type": "input",+ "description": "GPIO port A pin 8, 5V tolerant, USART1_CK, TIM1_CH1 or MCO clock output."+ },+ {+ "number": "68",+ "name": "PA9",+ "type": "input",+ "description": "GPIO port A pin 9, 5V tolerant, USART1_TX or TIM1_CH2."+ },+ {+ "number": "69",+ "name": "PA10",+ "type": "input",+ "description": "GPIO port A pin 10, 5V tolerant, USART1_RX or TIM1_CH3."+ },+ {+ "number": "70",+ "name": "PA11",+ "type": "input",+ "description": "GPIO port A pin 11, 5V tolerant, USART1_CTS, USB_DM, CAN_RX or TIM1_CH4."+ },+ {+ "number": "71",+ "name": "PA12",+ "type": "input",+ "description": "GPIO port A pin 12, 5V tolerant, USART1_RTS, USB_DP, CAN_TX or TIM1_ETR."+ },+ {+ "number": "72",+ "name": "PA13",+ "type": "input",+ "description": "GPIO port A pin 13, 5V tolerant, JTMS or SWDIO debug interface."+ },+ {+ "number": "73",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "74",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital supply +3.3 V nominal."+ },+ {+ "number": "75",+ "name": "PA14",+ "type": "input",+ "description": "GPIO port A pin 14, 5V tolerant, JTCK or SWCLK debug interface."+ },+ {+ "number": "76",+ "name": "PA15",+ "type": "input",+ "description": "GPIO port A pin 15, 5V tolerant, JTDI, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR or SPI1_NSS."+ },+ {+ "number": "77",+ "name": "PC10",+ "type": "input",+ "description": "GPIO port C pin 10, 5V tolerant, UART4_TX, SDIO_D2 or USART3_TX."+ },+ {+ "number": "78",+ "name": "PC11",+ "type": "input",+ "description": "GPIO port C pin 11, 5V tolerant, UART4_RX, SDIO_D3 or USART3_RX."+ },+ {+ "number": "79",+ "name": "PC12",+ "type": "input",+ "description": "GPIO port C pin 12, 5V tolerant, UART5_TX, SDIO_CK or USART3_CK."+ },+ {+ "number": "80",+ "name": "PD0",+ "type": "input",+ "description": "GPIO port D pin 0, 5V tolerant, OSC_IN (remappable), FSMC_D2 or CAN_RX."+ },+ {+ "number": "81",+ "name": "PD1",+ "type": "input",+ "description": "GPIO port D pin 1, 5V tolerant, OSC_OUT (remappable), FSMC_D3 or CAN_TX."+ },+ {+ "number": "82",+ "name": "PD2",+ "type": "input",+ "description": "GPIO port D pin 2, 5V tolerant, TIM3_ETR, UART5_RX or SDIO_CMD."+ },+ {+ "number": "83",+ "name": "PD3",+ "type": "input",+ "description": "GPIO port D pin 3, 5V tolerant, FSMC_CLK or USART2_CTS."+ },+ {+ "number": "84",+ "name": "PD4",+ "type": "input",+ "description": "GPIO port D pin 4, 5V tolerant, FSMC_NOE or USART2_RTS."+ },+ {+ "number": "85",+ "name": "PD5",+ "type": "input",+ "description": "GPIO port D pin 5, 5V tolerant, FSMC_NWE or USART2_TX."+ },+ {+ "number": "86",+ "name": "PD6",+ "type": "input",+ "description": "GPIO port D pin 6, 5V tolerant, FSMC_NWAIT or USART2_RX."+ },+ {+ "number": "87",+ "name": "PD7",+ "type": "input",+ "description": "GPIO port D pin 7, 5V tolerant, FSMC_NE1 or USART2_CK."+ },+ {+ "number": "88",+ "name": "PB3",+ "type": "input",+ "description": "GPIO port B pin 3, 5V tolerant, JTDO, SPI3_SCK, I2S3_CK, TRACESWO or TIM2_CH2 or SPI1_SCK."+ },+ {+ "number": "89",+ "name": "PB4",+ "type": "input",+ "description": "GPIO port B pin 4, 5V tolerant, NJTRST, SPI3_MISO, PB4 or TIM3_CH1 or SPI1_MISO."+ },+ {+ "number": "90",+ "name": "PB5",+ "type": "input",+ "description": "GPIO port B pin 5, I2C1_SMBA, SPI3_MOSI, I2S3_SD or TIM3_CH2 or SPI1_MOSI."+ },+ {+ "number": "91",+ "name": "PB6",+ "type": "input",+ "description": "GPIO port B pin 6, 5V tolerant, I2C1_SCL or TIM4_CH1 or USART1_TX."+ },+ {+ "number": "92",+ "name": "PB7",+ "type": "input",+ "description": "GPIO port B pin 7, 5V tolerant, I2C1_SDA, FSMC_NADV or TIM4_CH2 or USART1_RX."+ },+ {+ "number": "93",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot configuration input pin, selects boot from Flash or system memory at reset."+ },+ {+ "number": "94",+ "name": "PB8",+ "type": "input",+ "description": "GPIO port B pin 8, 5V tolerant, TIM4_CH3, SDIO_D4 or I2C1_SCL or CAN_RX."+ },+ {+ "number": "95",+ "name": "PB9",+ "type": "input",+ "description": "GPIO port B pin 9, 5V tolerant, TIM4_CH4, SDIO_D5 or I2C1_SDA or CAN_TX."+ },+ {+ "number": "96",+ "name": "PE0",+ "type": "input",+ "description": "GPIO port E pin 0, 5V tolerant, TIM4_ETR or FSMC_NBL0."+ },+ {+ "number": "97",+ "name": "PE1",+ "type": "input",+ "description": "GPIO port E pin 1, 5V tolerant, FSMC_NBL1."+ },+ {+ "number": "98",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Ground connection."+ },+ {+ "number": "99",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply +3.3 V nominal."+ },+ {+ "number": "100",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply +3.3 V nominal."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589837906455134208",+ "pages": 143,+ "sha256": "f69f74092e544134",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}