Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F103VDT6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F103VDT6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O PE2 with alternate functions TRACECK and FSMC_A23. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O PE3 with alternate functions TRACED0 and FSMC_A19. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O PE4 with alternate functions TRACED1 and FSMC_A20. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O PE5 with alternate functions TRACED2 and FSMC_A21. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O PE6 with alternate functions TRACED3 and FSMC_A22. |
| 6 | VBAT | power_in | Backup-domain supply pin VBAT for the RTC and backup registers. |
| 7 | PC13-TAMPER-RTC | bidirectional | PC13 is supplied through the power switch, which limits output use to 2 MHz with a 30 pF load and 3 mA sink current. |
| 8 | PC14-OSC32_IN | bidirectional | PC14 is supplied through the power switch, which limits output use to 2 MHz with a 30 pF load and 3 mA sink current; OSC32_IN alternate function. |
| 9 | PC15-OSC32_OUT | bidirectional | PC15 is supplied through the power switch, which limits output use to 2 MHz with a 30 pF load and 3 mA sink current; OSC32_OUT alternate function. |
| 10 | VSS_5 | power_in | Digital ground pin VSS_5 for the device. |
| 11 | VDD_5 | power_in | Digital supply pin VDD_5, part of the 2.0 to 3.6 V application supply for I/Os. |
| 12 | OSC_IN | input | External 4 to 16 MHz crystal oscillator input OSC_IN. |
| 13 | OSC_OUT | output | External 4 to 16 MHz crystal oscillator output OSC_OUT. |
| 14 | NRST | bidirectional | Device reset pin NRST. |
| 15 | PC0 | bidirectional | Standard I/O PC0 with ADC123_IN10 analog input. |
| 16 | PC1 | bidirectional | Standard I/O PC1 with ADC123_IN11 analog input. |
| 17 | PC2 | bidirectional | Standard I/O PC2 with ADC123_IN12 analog input. |
| 18 | PC3 | bidirectional | Standard I/O PC3 with ADC123_IN13 analog input. |
| 19 | VSSA | power_in | Analog ground pin VSSA. |
| 20 | VREF- | power_in | Negative reference voltage input VREF- for the ADC. |
| 21 | VREF+ | power_in | Positive reference voltage input VREF+ for the ADC, which must be between 2.4 V and VDDA. |
| 22 | VDDA | power_in | Analog supply pin VDDA, with a 2.4 to 3.6 V range for the ADC. |
| 23 | PA0-WKUP | bidirectional | Standard I/O PA0 with WKUP wakeup, ADC123_IN0, USART2_CTS and timer alternate functions. |
| 24 | PA1 | bidirectional | Standard I/O PA1 with USART2_RTS, ADC123_IN1 and TIM5_CH2 alternate functions. |
| 25 | PA2 | bidirectional | Standard I/O PA2 with USART2_TX, ADC123_IN2 and TIM5_CH3 alternate functions. |
| 26 | PA3 | bidirectional | Standard I/O PA3 with USART2_RX, ADC123_IN3 and TIM5_CH4 alternate functions. |
| 27 | VSS_4 | power_in | Digital ground pin VSS_4 for the device. |
| 28 | VDD_4 | power_in | Digital supply pin VDD_4, part of the 2.0 to 3.6 V application supply for I/Os. |
| 29 | PA4 | bidirectional | Standard I/O PA4 with DAC_OUT1, ADC12_IN4, SPI1_NSS and USART2_CK alternate functions. |
| 30 | PA5 | bidirectional | Standard I/O PA5 with DAC_OUT2, ADC12_IN5 and SPI1_SCK alternate functions. |
| 31 | PA6 | bidirectional | Standard I/O PA6 with SPI1_MISO, ADC12_IN6, TIM8_BKIN, TIM3_CH1 and TIM1_BKIN alternate functions. |
| 32 | PA7 | bidirectional | Standard I/O PA7 with SPI1_MOSI, ADC12_IN7, TIM8_CH1N, TIM3_CH2 and TIM1_CH1N alternate functions. |
| 33 | PC4 | bidirectional | Standard I/O PC4 with ADC12_IN14 analog input. |
| 34 | PC5 | bidirectional | Standard I/O PC5 with ADC12_IN15 analog input. |
| 35 | PB0 | bidirectional | Standard I/O PB0 with ADC12_IN8, TIM3_CH3, TIM8_CH2N and TIM1_CH2N alternate functions. |
| 36 | PB1 | bidirectional | Standard I/O PB1 with ADC12_IN9, TIM3_CH4, TIM8_CH3N and TIM1_CH3N alternate functions. |
| 37 | PB2 | bidirectional | 5 V tolerant I/O PB2 shared with the BOOT1 boot-mode function. |
| 38 | PE7 | bidirectional | 5 V tolerant I/O PE7 with FSMC_D4 and TIM1_ETR alternate functions. |
| 39 | PE8 | bidirectional | 5 V tolerant I/O PE8 with FSMC_D5 and TIM1_CH1N alternate functions. |
| 40 | PE9 | bidirectional | 5 V tolerant I/O PE9 with FSMC_D6 and TIM1_CH1 alternate functions. |
| 41 | PE10 | bidirectional | 5 V tolerant I/O PE10 with FSMC_D7 and TIM1_CH2N alternate functions. |
| 42 | PE11 | bidirectional | 5 V tolerant I/O PE11 with FSMC_D8 and TIM1_CH2 alternate functions. |
| 43 | PE12 | bidirectional | 5 V tolerant I/O PE12 with FSMC_D9 and TIM1_CH3N alternate functions. |
| 44 | PE13 | bidirectional | 5 V tolerant I/O PE13 with FSMC_D10 and TIM1_CH3 alternate functions. |
| 45 | PE14 | bidirectional | 5 V tolerant I/O PE14 with FSMC_D11 and TIM1_CH4 alternate functions. |
| 46 | PE15 | bidirectional | 5 V tolerant I/O PE15 with FSMC_D12 and TIM1_BKIN alternate functions. |
| 47 | PB10 | bidirectional | 5 V tolerant I/O PB10 with I2C2_SCL, USART3_TX and TIM2_CH3 alternate functions. |
| 48 | PB11 | bidirectional | 5 V tolerant I/O PB11 with I2C2_SDA, USART3_RX and TIM2_CH4 alternate functions. |
| 49 | VSS_1 | power_in | Digital ground pin VSS_1 for the device. |
| 50 | VDD_1 | power_in | Digital supply pin VDD_1, part of the 2.0 to 3.6 V application supply for I/Os. |
| 51 | PB12 | bidirectional | 5 V tolerant I/O PB12 with SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK and TIM1_BKIN alternate functions. |
| 52 | PB13 | bidirectional | 5 V tolerant I/O PB13 with SPI2_SCK, I2S2_CK, USART3_CTS and TIM1_CH1N alternate functions. |
| 53 | PB14 | bidirectional | 5 V tolerant I/O PB14 with SPI2_MISO, TIM1_CH2N and USART3_RTS alternate functions. |
| 54 | PB15 | bidirectional | 5 V tolerant I/O PB15 with SPI2_MOSI, I2S2_SD and TIM1_CH3N alternate functions. |
| 55 | PD8 | bidirectional | 5 V tolerant I/O PD8 with FSMC_D13 and USART3_TX alternate functions. |
| 56 | PD9 | bidirectional | 5 V tolerant I/O PD9 with FSMC_D14 and USART3_RX alternate functions. |
| 57 | PD10 | bidirectional | 5 V tolerant I/O PD10 with FSMC_D15 and USART3_CK alternate functions. |
| 58 | PD11 | bidirectional | 5 V tolerant I/O PD11 with FSMC_A16 and USART3_CTS alternate functions. |
| 59 | PD12 | bidirectional | 5 V tolerant I/O PD12 with FSMC_A17, TIM4_CH1 and USART3_RTS alternate functions. |
| 60 | PD13 | bidirectional | 5 V tolerant I/O PD13 with FSMC_A18 and TIM4_CH2 alternate functions. |
| 61 | PD14 | bidirectional | 5 V tolerant I/O PD14 with FSMC_D0 and TIM4_CH3 alternate functions. |
| 62 | PD15 | bidirectional | 5 V tolerant I/O PD15 with FSMC_D1 and TIM4_CH4 alternate functions. |
| 63 | PC6 | bidirectional | 5 V tolerant I/O PC6 with I2S2_MCK, TIM8_CH1, SDIO_D6 and TIM3_CH1 alternate functions. |
| 64 | PC7 | bidirectional | 5 V tolerant I/O PC7 with I2S3_MCK, TIM8_CH2, SDIO_D7 and TIM3_CH2 alternate functions. |
| 65 | PC8 | bidirectional | 5 V tolerant I/O PC8 with TIM8_CH3, SDIO_D0 and TIM3_CH3 alternate functions. |
| 66 | PC9 | bidirectional | 5 V tolerant I/O PC9 with TIM8_CH4, SDIO_D1 and TIM3_CH4 alternate functions. |
| 67 | PA8 | bidirectional | 5 V tolerant I/O PA8 with USART1_CK, TIM1_CH1 and MCO alternate functions. |
| 68 | PA9 | bidirectional | 5 V tolerant I/O PA9 with USART1_TX and TIM1_CH2 alternate functions. |
| 69 | PA10 | bidirectional | 5 V tolerant I/O PA10 with USART1_RX and TIM1_CH3 alternate functions. |
| 70 | PA11 | bidirectional | 5 V tolerant I/O PA11 with USART1_CTS, USBDM, CAN_RX and TIM1_CH4 alternate functions. |
| 71 | PA12 | bidirectional | 5 V tolerant I/O PA12 with USART1_RTS, USBDP, CAN_TX and TIM1_ETR alternate functions. |
| 72 | PA13 | bidirectional | 5 V tolerant I/O PA13 whose main function after reset is JTMS-SWDIO. |
| 73 | NC | unconnected | Pin is not connected. |
| 74 | VSS_2 | power_in | Digital ground pin VSS_2 for the device. |
| 75 | VDD_2 | power_in | Digital supply pin VDD_2, part of the 2.0 to 3.6 V application supply for I/Os. |
| 76 | PA14 | bidirectional | 5 V tolerant I/O PA14 whose main function after reset is JTCK-SWCLK. |
| 77 | PA15 | bidirectional | 5 V tolerant I/O PA15 with JTDI, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR and SPI1_NSS alternate functions. |
| 78 | PC10 | bidirectional | 5 V tolerant I/O PC10 with UART4_TX, SDIO_D2 and USART3_TX alternate functions. |
| 79 | PC11 | bidirectional | 5 V tolerant I/O PC11 with UART4_RX, SDIO_D3 and USART3_RX alternate functions. |
| 80 | PC12 | bidirectional | 5 V tolerant I/O PC12 with UART5_TX, SDIO_CK and USART3_CK alternate functions. |
| 81 | PD0 | bidirectional | 5 V tolerant I/O PD0 with FSMC_D2 and CAN_RX alternate functions, available by default on LQFP100. |
| 82 | PD1 | bidirectional | 5 V tolerant I/O PD1 with FSMC_D3 and CAN_TX alternate functions, available by default on LQFP100. |
| 83 | PD2 | bidirectional | 5 V tolerant I/O PD2 with TIM3_ETR, UART5_RX and SDIO_CMD alternate functions. |
| 84 | PD3 | bidirectional | 5 V tolerant I/O PD3 with FSMC_CLK and USART2_CTS alternate functions. |
| 85 | PD4 | bidirectional | 5 V tolerant I/O PD4 with FSMC_NOE and USART2_RTS alternate functions. |
| 86 | PD5 | bidirectional | 5 V tolerant I/O PD5 with FSMC_NWE and USART2_TX alternate functions. |
| 87 | PD6 | bidirectional | 5 V tolerant I/O PD6 with FSMC_NWAIT and USART2_RX alternate functions. |
| 88 | PD7 | bidirectional | 5 V tolerant I/O PD7 with FSMC_NE1/FSMC_NCE2 and USART2_CK alternate functions. |
| 89 | PB3 | bidirectional | 5 V tolerant I/O PB3 whose main function after reset is JTDO. |
| 90 | PB4 | bidirectional | 5 V tolerant I/O PB4 whose main function after reset is NJTRST. |
| 91 | PB5 | bidirectional | Standard I/O PB5 with I2C1_SMBA, SPI3_MOSI, I2S3_SD, TIM3_CH2 and SPI1_MOSI alternate functions. |
| 92 | PB6 | bidirectional | 5 V tolerant I/O PB6 with I2C1_SCL, TIM4_CH1 and USART1_TX alternate functions. |
| 93 | PB7 | bidirectional | 5 V tolerant I/O PB7 with I2C1_SDA, FSMC_NADV, TIM4_CH2 and USART1_RX alternate functions. |
| 94 | BOOT0 | input | Boot mode selection input BOOT0. |
| 95 | PB8 | bidirectional | 5 V tolerant I/O PB8 with TIM4_CH3, SDIO_D4, I2C1_SCL and CAN_RX alternate functions. |
| 96 | PB9 | bidirectional | 5 V tolerant I/O PB9 with TIM4_CH4, SDIO_D5, I2C1_SDA and CAN_TX alternate functions. |
| 97 | PE0 | bidirectional | 5 V tolerant I/O PE0 with TIM4_ETR and FSMC_NBL0 alternate functions. |
| 98 | PE1 | bidirectional | 5 V tolerant I/O PE1 with FSMC_NBL1 alternate function. |
| 99 | VSS_3 | power_in | Digital ground pin VSS_3 for the device. |
| 100 | VDD_3 | power_in | Digital supply pin VDD_3, part of the 2.0 to 3.6 V application supply for I/Os. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD-VSS (external main supply) | VDD-VSS | -0.3 | 4 | V | 43 | ||
| Variation between different VDD power pins | /ΔVDDx/ | 50 | mV | 43 | |||
| Variation between all ground pins | /VSSX-VSS/ | 50 | mV | 43 | |||
| Total current into VDD/VDDA power lines (source) | IVDD | 150 | mA | 43 | |||
| Total current out of VSS ground lines (sink) | IVSS | 150 | mA | 43 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 43 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | 43 | |||
| Injected current on five volt tolerant pins | IINJ(PIN) | -5 | 0 | mA | 43 | ||
| Injected current on any other pin | IINJ(PIN) | -5 | 5 | mA | 43 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 43 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 44 | ||
| Maximum junction temperature | TJ | 150 | °C | 44 | |||
| Internal AHB clock frequency | fHCLK | 0 | 72 | MHz | 44 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 36 | MHz | 44 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 72 | MHz | 44 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 44 | ||
| Analog operating voltage (ADC not used) | VDDA | 2 | 3.6 | V | Must be the same potential as VDD | 44 | |
| Analog operating voltage (ADC used) | VDDA | 2.4 | 3.6 | V | ADC used | 44 | |
| Backup operating voltage | VBAT | 1.8 | 3.6 | V | 44 | ||
| Power dissipation LQFP100 | PD | 434 | mW | TA = 85 °C for suffix 6 | 44 | ||
| Power dissipation LQFP144 | PD | 666 | mW | TA = 85 °C for suffix 6 | 44 | ||
| Ambient temperature for 6 suffix version (maximum power dissipation) | TA | -40 | 85 | °C | Maximum power dissipation | 44 | |
| Ambient temperature for 6 suffix version (low-power dissipation) | TA | -40 | 105 | °C | Low-power dissipation | 44 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 6 suffix version | 44 | |
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 45 |
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 45 |
| Reset temporization | TRSTTEMPO | 1 | 2.5 | 4.5 | ms | 45 | |
| Internal reference voltage | VREFINT | 1.16 | 1.2 | 1.26 | V | -40 °C < TA < +105 °C | 46 |
| Internal reference voltage | VREFINT | 1.16 | 1.2 | 1.24 | V | -40 °C < TA < +85 °C | 46 |
| ADC sampling time when reading the internal reference voltage | TS_vrefint | 5.1 | 17.1 | µs | 46 | ||
| User external clock source frequency (HSE) | fHSE_ext | 1 | 8 | 25 | MHz | 58 | |
| OSC_IN high or low time | tw(HSE) | 5 | ns | 58 | |||
| OSC_IN rise or fall time | tr(HSE)/tf(HSE) | 20 | ns | 58 | |||
| Duty cycle (HSE external clock) | DuCy(HSE) | 45 | 55 | % | 58 | ||
| Oscillator frequency (HSE crystal) | fOSC_IN | 4 | 8 | 16 | MHz | 60 | |
| Oscillator transconductance | gm | 25 | mA/V | Startup | 60 | ||
| HSE HSI oscillator frequency | fHSI | 8 | MHz | 62 | |||
| HSI duty cycle | DuCy(HSI) | 45 | 55 | % | 62 | ||
| Accuracy of the HSI oscillator, user-trimmed | ACCHSI | 1 | % | User-trimmed with the RCC_CR register | 62 | ||
| Accuracy of the HSI oscillator, factory-calibrated | ACCHSI | -2 | 2.5 | % | TA = -40 to 105 °C | 62 | |
| Accuracy of the HSI oscillator, factory-calibrated | ACCHSI | -1.5 | 2.2 | % | TA = -10 to 85 °C | 62 | |
| Accuracy of the HSI oscillator, factory-calibrated | ACCHSI | -1.3 | 2 | % | TA = 0 to 70 °C | 62 | |
| Accuracy of the HSI oscillator, factory-calibrated | ACCHSI | -1.1 | 1.8 | % | TA = 25 °C | 62 | |
| LSI oscillator frequency | fLSI | 30 | 40 | 60 | kHz | 63 | |
| LSI oscillator startup time | tsu(LSI) | 85 | µs | 63 | |||
| PLL input clock | fPLL_IN | 1 | 8 | 25 | MHz | 64 | |
| PLL multiplier output clock | fPLL_OUT | 16 | 72 | MHz | 64 | ||
| PLL lock time | tLOCK | 200 | µs | 64 | |||
| 16-bit programming time | tprog | 40 | 52.5 | 70 | µs | TA = -40 to +105 °C | 64 |
| Page (2 KB) erase time | tERASE | 20 | 40 | ms | TA = -40 to +105 °C | 64 | |
| Mass erase time | tME | 20 | 40 | ms | TA = -40 to +105 °C | 64 | |
| Supply current Read mode | IDD | 28 | mA | fHCLK = 72 MHz with 2 wait states, VDD = 3.3 V | 64 | ||
| Programming voltage | Vprog | 2 | 3.6 | V | 64 | ||
| Endurance (6 suffix) | NEND | 10 | kcycles | TA = -40 to +85 °C (6 suffix versions) | 65 |
CAD (KiCad official)
- Symbol:
STM32F103VDT6TR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f103vdt6tr-etched.step/stm32f103vdt6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f103vdt6tr.step/stm32f103vdt6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (143 pp, sha256
c61db5e362b62f2f, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).