← Commit history

Initial commit: component/stm32f101r4t6a

Ray ·5e6d90b468 ·
2 files changed +593
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F101R4T6A++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F101R4T6A from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery backup supply for RTC and backup registers, 2.0 to 3.6 V |+| 2 | PC13-TAMPER-RTC | bidirectional | GPIO or RTC tamper/clock input with 3 mA current limit via power switch |+| 3 | PC14-OSC32_IN | bidirectional | 32 kHz oscillator input or GPIO with 3 mA current limit via power switch |+| 4 | PC15-OSC32_OUT | bidirectional | 32 kHz oscillator output or GPIO with 3 mA current limit via power switch |+| 5 | PD0-OSC_IN | input | High-speed external oscillator input (4-16 MHz crystal), configurable as OSC_IN after reset |+| 6 | PD1-OSC_OUT | output | High-speed external oscillator output for crystal feedback |+| 7 | NRST | input | Active low reset input with internal pull-up and Schmitt trigger |+| 8 | PC0 | bidirectional | GPIO or ADC_IN10 analog input, 0 to 3.6 V conversion range |+| 9 | PC1 | bidirectional | GPIO or ADC_IN11 analog input, 0 to 3.6 V conversion range |+| 10 | PC2 | bidirectional | GPIO or ADC_IN12 analog input, 0 to 3.6 V conversion range |+| 11 | PC3 | bidirectional | GPIO or ADC_IN13 analog input, 0 to 3.6 V conversion range |+| 12 | VSSA | power_in | Analog ground supply |+| 13 | VDDA | power_in | Analog supply voltage for ADC and temperature sensor, 2.0 to 3.6 V |+| 14 | PA0-WKUP | bidirectional | GPIO PA0 or wakeup/USART2_CTS/ADC_IN0/TIM2_CH1_ETR with software remapping capability |+| 15 | PA1 | bidirectional | GPIO or USART2_RTS/ADC_IN1/TIM2_CH2 with software remapping capability |+| 16 | PA2 | bidirectional | GPIO or USART2_TX/ADC_IN2/TIM2_CH3 with software remapping capability |+| 17 | PA3 | bidirectional | GPIO or USART2_RX/ADC_IN3/TIM2_CH4 with software remapping capability |+| 18 | VSS_4 | power_in | Ground |+| 19 | VDD_4 | power_in | Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended |+| 20 | PA4 | bidirectional | GPIO or SPI1_NSS/ADC_IN4/USART2_CK with software remapping capability |+| 21 | PA5 | bidirectional | GPIO or SPI1_SCK/ADC_IN5 with software remapping capability |+| 22 | PA6 | bidirectional | GPIO or SPI1_MISO/ADC_IN6/TIM3_CH1 with software remapping capability |+| 23 | PA7 | bidirectional | GPIO or SPI1_MOSI/ADC_IN7/TIM3_CH2 with software remapping capability |+| 24 | PC4 | bidirectional | GPIO or ADC_IN14 analog input, 0 to 3.6 V conversion range |+| 25 | PC5 | bidirectional | GPIO or ADC_IN15 analog input, 0 to 3.6 V conversion range |+| 26 | PB0 | bidirectional | GPIO or ADC_IN8/TIM3_CH3 with software remapping capability |+| 27 | PB1 | bidirectional | GPIO or ADC_IN9/TIM3_CH4 with software remapping capability |+| 28 | PB2 | bidirectional | GPIO (BOOT1) or 5V tolerant I/O |+| 29 | PB10 | bidirectional | 5V tolerant GPIO with software remappable to TIM2_CH3 |+| 30 | PB11 | bidirectional | 5V tolerant GPIO with software remappable to TIM2_CH4 |+| 31 | VSS_1 | power_in | Ground |+| 32 | VDD_1 | power_in | Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended |+| 33 | PB12 | bidirectional | 5V tolerant GPIO |+| 34 | PB13 | bidirectional | 5V tolerant GPIO |+| 35 | PB14 | bidirectional | 5V tolerant GPIO |+| 36 | PB15 | bidirectional | 5V tolerant GPIO |+| 37 | PC6 | bidirectional | 5V tolerant GPIO with software remappable to TIM3_CH1 |+| 38 | PC7 | bidirectional | 5V tolerant GPIO with software remappable to TIM3_CH2 |+| 39 | PC8 | bidirectional | 5V tolerant GPIO with software remappable to TIM3_CH3 |+| 40 | PC9 | bidirectional | 5V tolerant GPIO with software remappable to TIM3_CH4 |+| 41 | PA8 | bidirectional | 5V tolerant GPIO or USART1_CK/MCO clock output |+| 42 | PA9 | bidirectional | 5V tolerant GPIO or USART1_TX output with software remapping capability |+| 43 | PA10 | bidirectional | 5V tolerant GPIO or USART1_RX input with software remapping capability |+| 44 | PA11 | bidirectional | 5V tolerant GPIO or USART1_CTS input |+| 45 | PA12 | bidirectional | 5V tolerant GPIO or USART1_RTS output |+| 46 | PA13 | bidirectional | 5V tolerant JTAG TMS/Serial Wire SWDIO debug pin with software remappable to PA13 |+| 47 | VSS_2 | power_in | Ground |+| 48 | VDD_2 | power_in | Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended |+| 49 | PA14 | bidirectional | 5V tolerant JTAG TCK/Serial Wire SWCLK debug pin with software remappable to PA14 |+| 50 | PA15 | bidirectional | 5V tolerant JTAG TDI debug pin with software remappable to TIM2_CH1_ETR/PA15/SPI1_NSS |+| 51 | PC10 | bidirectional | 5V tolerant GPIO |+| 52 | PC11 | bidirectional | 5V tolerant GPIO |+| 53 | PC12 | bidirectional | 5V tolerant GPIO |+| 54 | PD2 | bidirectional | 5V tolerant GPIO or TIM3_ETR external trigger input |+| 55 | PB3 | bidirectional | 5V tolerant JTAG TDO debug output with software remappable to TIM2_CH2/PB3/TRACESWO/SPI1_SCK |+| 56 | PB4 | bidirectional | 5V tolerant JTAG NTRST debug pin with software remappable to TIM3_CH1/PB4/SPI1_MISO |+| 57 | PB5 | bidirectional | GPIO or I2C1_SMBA with software remappable to TIM3_CH2/SPI1_MOSI |+| 58 | PB6 | bidirectional | 5V tolerant GPIO or I2C1_SCL with software remappable to USART1_TX |+| 59 | PB7 | bidirectional | 5V tolerant GPIO or I2C1_SDA with software remappable to USART1_RX |+| 60 | BOOT0 | input | Boot configuration pin (0=boot from Flash, 1=boot from system memory) |+| 61 | PB8 | bidirectional | 5V tolerant GPIO with software remappable to I2C1_SCL |+| 62 | PB9 | bidirectional | 5V tolerant GPIO with software remappable to I2C1_SDA |+| 63 | VSS_3 | power_in | Ground |+| 64 | VDD_3 | power_in | Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F101R4T6A`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f101r4t6a-etched.step` / `stm32f101r4t6a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f101r4t6a.step` / `stm32f101r4t6a.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922754246983680) (87 pp, sha256 `a0484b8e7d5434bf`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f101r4t6a-datasheet.pdf)
page.jsonadded+493
@@ -0,0 +1,493 @@+{+  "slug": "stm32f101r4t6a",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f101r4t6a",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f101r4t6a.kicad_sym",+    "stm32f101r4t6a.kicad_mod",+    "stm32f101r4t6a.glb",+    "stm32f101r4t6a.step",+    "stm32f101r4t6a.lbr",+    "docs/hero.png",+    "docs/stm32f101r4t6a-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F101R4T6A",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922754246983680",+    "parts": {+      "symbol": "stm32f101r4t6a.kicad_sym",+      "footprint": "stm32f101r4t6a.kicad_mod",+      "model_3d": "stm32f101r4t6a-etched.glb",+      "model_3d_plain": "stm32f101r4t6a.glb",+      "model_3d_step": "stm32f101r4t6a-etched.step",+      "model_3d_step_plain": "stm32f101r4t6a.step",+      "lbr": "stm32f101r4t6a.lbr"+    },+    "distributor_links": {+      "lcsc": "C1340637",+      "digikey": "497-8314-ND",+      "mouser": "511-STM32F101R4T6A"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T05:47:45Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-8314-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F101R4T6A",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery backup supply for RTC and backup registers, 2.0 to 3.6 V"+      },+      {+        "number": "2",+        "name": "PC13-TAMPER-RTC",+        "type": "bidirectional",+        "description": "GPIO or RTC tamper/clock input with 3 mA current limit via power switch"+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "32 kHz oscillator input or GPIO with 3 mA current limit via power switch"+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "32 kHz oscillator output or GPIO with 3 mA current limit via power switch"+      },+      {+        "number": "5",+        "name": "PD0-OSC_IN",+        "type": "input",+        "description": "High-speed external oscillator input (4-16 MHz crystal), configurable as OSC_IN after reset"+      },+      {+        "number": "6",+        "name": "PD1-OSC_OUT",+        "type": "output",+        "description": "High-speed external oscillator output for crystal feedback"+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "input",+        "description": "Active low reset input with internal pull-up and Schmitt trigger"+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN10 analog input, 0 to 3.6 V conversion range"+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN11 analog input, 0 to 3.6 V conversion range"+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN12 analog input, 0 to 3.6 V conversion range"+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN13 analog input, 0 to 3.6 V conversion range"+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply"+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply voltage for ADC and temperature sensor, 2.0 to 3.6 V"+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO PA0 or wakeup/USART2_CTS/ADC_IN0/TIM2_CH1_ETR with software remapping capability"+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO or USART2_RTS/ADC_IN1/TIM2_CH2 with software remapping capability"+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO or USART2_TX/ADC_IN2/TIM2_CH3 with software remapping capability"+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO or USART2_RX/ADC_IN3/TIM2_CH4 with software remapping capability"+      },+      {+        "number": "18",+        "name": "VSS_4",+        "type": "power_in",+        "description": "Ground"+      },+      {+        "number": "19",+        "name": "VDD_4",+        "type": "power_in",+        "description": "Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended"+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO or SPI1_NSS/ADC_IN4/USART2_CK with software remapping capability"+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO or SPI1_SCK/ADC_IN5 with software remapping capability"+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO or SPI1_MISO/ADC_IN6/TIM3_CH1 with software remapping capability"+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO or SPI1_MOSI/ADC_IN7/TIM3_CH2 with software remapping capability"+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN14 analog input, 0 to 3.6 V conversion range"+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN15 analog input, 0 to 3.6 V conversion range"+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN8/TIM3_CH3 with software remapping capability"+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO or ADC_IN9/TIM3_CH4 with software remapping capability"+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO (BOOT1) or 5V tolerant I/O"+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to TIM2_CH3"+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to TIM2_CH4"+      },+      {+        "number": "31",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Ground"+      },+      {+        "number": "32",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended"+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to TIM3_CH1"+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to TIM3_CH2"+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to TIM3_CH3"+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to TIM3_CH4"+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or USART1_CK/MCO clock output"+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or USART1_TX output with software remapping capability"+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or USART1_RX input with software remapping capability"+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or USART1_CTS input"+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or USART1_RTS output"+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V tolerant JTAG TMS/Serial Wire SWDIO debug pin with software remappable to PA13"+      },+      {+        "number": "47",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Ground"+      },+      {+        "number": "48",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended"+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V tolerant JTAG TCK/Serial Wire SWCLK debug pin with software remappable to PA14"+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V tolerant JTAG TDI debug pin with software remappable to TIM2_CH1_ETR/PA15/SPI1_NSS"+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5V tolerant GPIO"+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or TIM3_ETR external trigger input"+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V tolerant JTAG TDO debug output with software remappable to TIM2_CH2/PB3/TRACESWO/SPI1_SCK"+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V tolerant JTAG NTRST debug pin with software remappable to TIM3_CH1/PB4/SPI1_MISO"+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO or I2C1_SMBA with software remappable to TIM3_CH2/SPI1_MOSI"+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or I2C1_SCL with software remappable to USART1_TX"+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V tolerant GPIO or I2C1_SDA with software remappable to USART1_RX"+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot configuration pin (0=boot from Flash, 1=boot from system memory)"+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to I2C1_SCL"+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V tolerant GPIO with software remappable to I2C1_SDA"+      },+      {+        "number": "63",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Ground"+      },+      {+        "number": "64",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Main supply voltage, 2.0 to 3.6 V with 100 nF decoupling capacitor recommended"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 5-6 (PD0-OSC_IN and PD1-OSC_OUT): These oscillator pins are configured as OSC_IN/OSC_OUT after ; PC13, PC14, PC15: Limited to 3 mA current sink via internal power switch; maximum speed 2 MHz with 3; Debug pins PA13, PA14, PA15, PB3, PB4: Serve dual purpose as JTAG/SWD debug pins or GPIO; default fu"+        ],+        "pages_sent": 36,+        "cost_usd": 0.3145,+        "at": "2026-10-01T05:47:17"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922754246983680",+        "pages": 87,+        "sha256": "a0484b8e7d5434bf",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file