component
STM32F100RDT6B
Public Made by Adomby adom
STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32F100RDT6B++**STMicroelectronics** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)++STM32F100RDT6B from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup-domain supply input for the RTC and backup registers (VBAT supply for RTC and backup registers). |+| 2 | PC13-TAMPER-RTC | bidirectional | 5 V-tolerant GPIO PC13 with TAMPER-RTC function; it is supplied through the power switch, which sinks only 3 mA, so it must not source current (e.g. to drive an LED) and output speed is limited to 2 MHz with a 30 pF load. |+| 3 | PC14-OSC32_IN | bidirectional | GPIO PC14 with OSC32_IN function; it is supplied through the power switch (3 mA sink limit), so output speed is limited to 2 MHz with a 30 pF load and it must not source current. |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO PC15 with OSC32_OUT function; it is supplied through the power switch (3 mA sink limit), so output speed is limited to 2 MHz with a 30 pF load and it must not source current. |+| 5 | OSC_IN | input | Input of the 4-to-24 MHz crystal oscillator; after reset this pin is OSC_IN and PD0 can be remapped onto it by software on LQFP64. |+| 6 | OSC_OUT | output | Output of the 4-to-24 MHz crystal oscillator; after reset this pin is OSC_OUT and PD1 can be remapped onto it by software on LQFP64. |+| 7 | NRST | bidirectional | Reset pin NRST; its electrical characteristics are specified in the NRST pin characteristics section (5.3.15). |+| 8 | PC0 | bidirectional | Standard (non-5 V-tolerant) GPIO PC0 with ADC_IN10 analog input. |+| 9 | PC1 | bidirectional | Standard (non-5 V-tolerant) GPIO PC1 with ADC_IN11 analog input. |+| 10 | PC2 | bidirectional | Standard (non-5 V-tolerant) GPIO PC2 with ADC_IN12 analog input. |+| 11 | PC3 | bidirectional | Standard (non-5 V-tolerant) GPIO PC3 with ADC_IN13 analog input. |+| 12 | VSSA | power_in | Analog ground (VSSA) pin; all voltages are referenced to VSS. |+| 13 | VDDA | power_in | Analog supply pin VDDA; the temperature sensor conversion range is 2 V < VDDA < 3.6 V. |+| 14 | PA0-WKUP | bidirectional | Standard GPIO PA0 with WKUP wake-up function and alternate functions ADC_IN0, USART2_CTS, TIM2_CH1_ETR and TIM5_CH1. |+| 15 | PA1 | bidirectional | Standard GPIO PA1 with alternate functions USART2_RTS, ADC_IN1, TIM5_CH2 and TIM2_CH2. |+| 16 | PA2 | bidirectional | Standard GPIO PA2 with alternate functions USART2_TX, TIM5_CH3, ADC_IN2, TIM15_CH1 and TIM2_CH3. |+| 17 | PA3 | bidirectional | Standard GPIO PA3 with alternate functions USART2_RX, TIM5_CH4, ADC_IN3, TIM2_CH4 and TIM15_CH2. |+| 18 | VSS_4 | power_in | Digital ground pin VSS_4. |+| 19 | VDD_4 | power_in | Digital supply pin VDD_4; the application supply and I/Os operate from 2.0 to 3.6 V. |+| 20 | PA4 | bidirectional | Standard GPIO PA4 with alternate functions SPI1_NSS, USART2_CK, DAC_OUT1 and ADC_IN4. |+| 21 | PA5 | bidirectional | Standard GPIO PA5 with alternate functions SPI1_SCK, DAC_OUT2 and ADC_IN5. |+| 22 | PA6 | bidirectional | Standard GPIO PA6 with alternate functions SPI1_MISO, ADC_IN6 and TIM3_CH1; TIM1_BKIN and TIM16_CH1 are remap options. |+| 23 | PA7 | bidirectional | Standard GPIO PA7 with alternate functions SPI1_MOSI, ADC_IN7 and TIM3_CH2; TIM1_CH1N and TIM17_CH1 are remap options. |+| 24 | PC4 | bidirectional | Standard GPIO PC4 with alternate functions ADC_IN14 and TIM12_CH1. |+| 25 | PC5 | bidirectional | Standard GPIO PC5 with alternate functions ADC_IN15 and TIM12_CH2. |+| 26 | PB0 | bidirectional | Standard GPIO PB0 with alternate functions ADC_IN8 and TIM3_CH3; TIM1_CH2N and TIM13_CH1 are remap options. |+| 27 | PB1 | bidirectional | Standard GPIO PB1 with alternate functions ADC_IN9 and TIM3_CH4; TIM1_CH3N and TIM14_CH1 are remap options. |+| 28 | PB2/BOOT1 | bidirectional | 5 V-tolerant (FT) GPIO PB2, also used as the BOOT1 boot-mode pin. |+| 29 | PB10 | bidirectional | 5 V-tolerant (FT) GPIO PB10 with alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and HDMI_CEC. |+| 30 | PB11 | bidirectional | 5 V-tolerant (FT) GPIO PB11 with alternate functions I2C2_SDA, USART3_RX and TIM2_CH4. |+| 31 | VSS_1 | power_in | Digital ground pin VSS_1. |+| 32 | VDD_1 | power_in | Digital supply pin VDD_1; the application supply and I/Os operate from 2.0 to 3.6 V. |+| 33 | PB12 | bidirectional | 5 V-tolerant (FT) GPIO PB12 with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, TIM1_BKIN and TIM12_CH1. |+| 34 | PB13 | bidirectional | 5 V-tolerant (FT) GPIO PB13 with alternate functions SPI2_SCK, USART3_CTS, TIM1_CH1N and TIM12_CH2. |+| 35 | PB14 | bidirectional | 5 V-tolerant (FT) GPIO PB14 with alternate functions SPI2_MISO, USART3_RTS, TIM1_CH2N and TIM15_CH1. |+| 36 | PB15 | bidirectional | 5 V-tolerant (FT) GPIO PB15 with alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2. |+| 37 | PC6 | bidirectional | 5 V-tolerant (FT) GPIO PC6 with alternate function TIM3_CH1. |+| 38 | PC7 | bidirectional | 5 V-tolerant (FT) GPIO PC7 with alternate function TIM3_CH2. |+| 39 | PC8 | bidirectional | 5 V-tolerant (FT) GPIO PC8 with alternate functions TIM13_CH1 and TIM3_CH3. |+| 40 | PC9 | bidirectional | 5 V-tolerant (FT) GPIO PC9 with alternate functions TIM14_CH1 and TIM3_CH4. |+| 41 | PA8 | bidirectional | 5 V-tolerant (FT) GPIO PA8 with alternate functions USART1_CK, TIM1_CH1 and MCO. |+| 42 | PA9 | bidirectional | 5 V-tolerant (FT) GPIO PA9 with alternate functions USART1_TX, TIM1_CH2 and TIM15_BKIN. |+| 43 | PA10 | bidirectional | 5 V-tolerant (FT) GPIO PA10 with alternate functions USART1_RX, TIM1_CH3 and TIM17_BKIN. |+| 44 | PA11 | bidirectional | 5 V-tolerant (FT) GPIO PA11 with alternate functions USART1_CTS and TIM1_CH4. |+| 45 | PA12 | bidirectional | 5 V-tolerant (FT) GPIO PA12 with alternate functions USART1_RTS and TIM1_ETR. |+| 46 | PA13 | bidirectional | 5 V-tolerant (FT) GPIO PA13 with JTMS-SWDIO debug function. |+| 47 | VSS_2 | power_in | Digital ground pin VSS_2. |+| 48 | VDD_2 | power_in | Digital supply pin VDD_2; the application supply and I/Os operate from 2.0 to 3.6 V. |+| 49 | PA14 | bidirectional | 5 V-tolerant (FT) GPIO PA14 with JTCK-SWCLK debug function. |+| 50 | PA15 | bidirectional | 5 V-tolerant (FT) GPIO PA15 with JTDI, SPI3_NSS, TIM2_CH1_ETR and SPI1_NSS alternate functions. |+| 51 | PC10 | bidirectional | 5 V-tolerant (FT) GPIO PC10 with alternate functions UART4_TX and USART3_TX. |+| 52 | PC11 | bidirectional | 5 V-tolerant (FT) GPIO PC11 with alternate functions UART4_RX and USART3_RX. |+| 53 | PC12 | bidirectional | 5 V-tolerant (FT) GPIO PC12 with alternate functions UART5_TX and USART3_CK. |+| 54 | PD2 | bidirectional | 5 V-tolerant (FT) GPIO PD2 with alternate functions TIM3_ETR and UART5_RX. |+| 55 | PB3 | bidirectional | 5 V-tolerant (FT) GPIO PB3 with JTDO/TRACESWO debug, SPI3_SCK, TIM2_CH2 and SPI1_SCK alternate functions. |+| 56 | PB4 | bidirectional | 5 V-tolerant (FT) GPIO PB4 with NJTRST debug, SPI3_MISO, TIM3_CH1 and SPI1_MISO alternate functions. |+| 57 | PB5 | bidirectional | GPIO PB5 (not 5 V-tolerant) with alternate functions I2C1_SMBA, SPI3_MOSI, TIM16_BKIN, TIM3_CH2 and SPI1_MOSI. |+| 58 | PB6 | bidirectional | 5 V-tolerant (FT) GPIO PB6 with alternate functions I2C1_SCL, TIM4_CH1, TIM16_CH1N and USART1_TX. |+| 59 | PB7 | bidirectional | 5 V-tolerant (FT) GPIO PB7 with alternate functions I2C1_SDA, TIM4_CH2, TIM17_CH1N and USART1_RX; the FSMC_NADV function listed for this pin is not available on LQFP64. |+| 60 | BOOT0 | input | Boot selection input BOOT0 (input-only pin). |+| 61 | PB8 | bidirectional | 5 V-tolerant (FT) GPIO PB8 with alternate functions TIM4_CH3, TIM16_CH1, HDMI_CEC and I2C1_SCL. |+| 62 | PB9 | bidirectional | 5 V-tolerant (FT) GPIO PB9 with alternate functions TIM4_CH4, TIM17_CH1 and I2C1_SDA. |+| 63 | VSS_3 | power_in | Digital ground pin VSS_3. |+| 64 | VDD_3 | power_in | Digital supply pin VDD_3; the application supply and I/Os operate from 2.0 to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Single Chip Microcomputer/Microcontroller |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F100RDT6B`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f100rdt6b-etched.step` / `stm32f100rdt6b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f100rdt6b.step` / `stm32f100rdt6b.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589868609989074944) (107 pp, sha256 `37ac4e5d049f3b5d`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f100rdt6b-datasheet.pdf)
page.jsonadded+535@@ -0,0 +1,535 @@+{+ "slug": "stm32f100rdt6b",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "single chip microcomputer-microcontroller",+ "stm32f100rdt6b",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f100rdt6b.kicad_sym",+ "stm32f100rdt6b.kicad_mod",+ "stm32f100rdt6b.glb",+ "stm32f100rdt6b.step",+ "stm32f100rdt6b.lbr",+ "docs/hero.png",+ "docs/stm32f100rdt6b-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32f100rdt6b-hero.glb",+ "stm32f100rdt6b-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32F100RDT6B",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Single Chip Microcomputer/Microcontroller",+ "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589868609989074944",+ "parts": {+ "symbol": "stm32f100rdt6b.kicad_sym",+ "footprint": "stm32f100rdt6b.kicad_mod",+ "model_3d": "stm32f100rdt6b-hero.glb",+ "model_3d_plain": "stm32f100rdt6b.glb",+ "model_3d_step": "stm32f100rdt6b-etched.step",+ "model_3d_step_plain": "stm32f100rdt6b.step",+ "lbr": "stm32f100rdt6b.lbr"+ },+ "distributor_links": {+ "lcsc": "C967639",+ "digikey": "497-17375-ND",+ "mouser": "511-STM32F100RDT6B"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T20:31:54Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-17375-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32F100RDT6B",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup-domain supply input for the RTC and backup registers (VBAT supply for RTC and backup registers)."+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO PC13 with TAMPER-RTC function; it is supplied through the power switch, which sinks only 3 mA, so it must not source current (e.g. to drive an LED) and output speed is limited to 2 MHz with a 30 pF load."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "GPIO PC14 with OSC32_IN function; it is supplied through the power switch (3 mA sink limit), so output speed is limited to 2 MHz with a 30 pF load and it must not source current."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "GPIO PC15 with OSC32_OUT function; it is supplied through the power switch (3 mA sink limit), so output speed is limited to 2 MHz with a 30 pF load and it must not source current."+ },+ {+ "number": "5",+ "name": "OSC_IN",+ "type": "input",+ "description": "Input of the 4-to-24 MHz crystal oscillator; after reset this pin is OSC_IN and PD0 can be remapped onto it by software on LQFP64."+ },+ {+ "number": "6",+ "name": "OSC_OUT",+ "type": "output",+ "description": "Output of the 4-to-24 MHz crystal oscillator; after reset this pin is OSC_OUT and PD1 can be remapped onto it by software on LQFP64."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Reset pin NRST; its electrical characteristics are specified in the NRST pin characteristics section (5.3.15)."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "Standard (non-5 V-tolerant) GPIO PC0 with ADC_IN10 analog input."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "Standard (non-5 V-tolerant) GPIO PC1 with ADC_IN11 analog input."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "Standard (non-5 V-tolerant) GPIO PC2 with ADC_IN12 analog input."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "Standard (non-5 V-tolerant) GPIO PC3 with ADC_IN13 analog input."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground (VSSA) pin; all voltages are referenced to VSS."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply pin VDDA; the temperature sensor conversion range is 2 V < VDDA < 3.6 V."+ },+ {+ "number": "14",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "Standard GPIO PA0 with WKUP wake-up function and alternate functions ADC_IN0, USART2_CTS, TIM2_CH1_ETR and TIM5_CH1."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "Standard GPIO PA1 with alternate functions USART2_RTS, ADC_IN1, TIM5_CH2 and TIM2_CH2."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "Standard GPIO PA2 with alternate functions USART2_TX, TIM5_CH3, ADC_IN2, TIM15_CH1 and TIM2_CH3."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "Standard GPIO PA3 with alternate functions USART2_RX, TIM5_CH4, ADC_IN3, TIM2_CH4 and TIM15_CH2."+ },+ {+ "number": "18",+ "name": "VSS_4",+ "type": "power_in",+ "description": "Digital ground pin VSS_4."+ },+ {+ "number": "19",+ "name": "VDD_4",+ "type": "power_in",+ "description": "Digital supply pin VDD_4; the application supply and I/Os operate from 2.0 to 3.6 V."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "Standard GPIO PA4 with alternate functions SPI1_NSS, USART2_CK, DAC_OUT1 and ADC_IN4."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "Standard GPIO PA5 with alternate functions SPI1_SCK, DAC_OUT2 and ADC_IN5."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "Standard GPIO PA6 with alternate functions SPI1_MISO, ADC_IN6 and TIM3_CH1; TIM1_BKIN and TIM16_CH1 are remap options."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "Standard GPIO PA7 with alternate functions SPI1_MOSI, ADC_IN7 and TIM3_CH2; TIM1_CH1N and TIM17_CH1 are remap options."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "Standard GPIO PC4 with alternate functions ADC_IN14 and TIM12_CH1."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "Standard GPIO PC5 with alternate functions ADC_IN15 and TIM12_CH2."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "Standard GPIO PB0 with alternate functions ADC_IN8 and TIM3_CH3; TIM1_CH2N and TIM13_CH1 are remap options."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "Standard GPIO PB1 with alternate functions ADC_IN9 and TIM3_CH4; TIM1_CH3N and TIM14_CH1 are remap options."+ },+ {+ "number": "28",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB2, also used as the BOOT1 boot-mode pin."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB10 with alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and HDMI_CEC."+ },+ {+ "number": "30",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB11 with alternate functions I2C2_SDA, USART3_RX and TIM2_CH4."+ },+ {+ "number": "31",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Digital ground pin VSS_1."+ },+ {+ "number": "32",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital supply pin VDD_1; the application supply and I/Os operate from 2.0 to 3.6 V."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB12 with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, TIM1_BKIN and TIM12_CH1."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB13 with alternate functions SPI2_SCK, USART3_CTS, TIM1_CH1N and TIM12_CH2."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB14 with alternate functions SPI2_MISO, USART3_RTS, TIM1_CH2N and TIM15_CH1."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB15 with alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC6 with alternate function TIM3_CH1."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC7 with alternate function TIM3_CH2."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC8 with alternate functions TIM13_CH1 and TIM3_CH3."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC9 with alternate functions TIM14_CH1 and TIM3_CH4."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA8 with alternate functions USART1_CK, TIM1_CH1 and MCO."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA9 with alternate functions USART1_TX, TIM1_CH2 and TIM15_BKIN."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA10 with alternate functions USART1_RX, TIM1_CH3 and TIM17_BKIN."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA11 with alternate functions USART1_CTS and TIM1_CH4."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA12 with alternate functions USART1_RTS and TIM1_ETR."+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA13 with JTMS-SWDIO debug function."+ },+ {+ "number": "47",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Digital ground pin VSS_2."+ },+ {+ "number": "48",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital supply pin VDD_2; the application supply and I/Os operate from 2.0 to 3.6 V."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA14 with JTCK-SWCLK debug function."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PA15 with JTDI, SPI3_NSS, TIM2_CH1_ETR and SPI1_NSS alternate functions."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC10 with alternate functions UART4_TX and USART3_TX."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC11 with alternate functions UART4_RX and USART3_RX."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PC12 with alternate functions UART5_TX and USART3_CK."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PD2 with alternate functions TIM3_ETR and UART5_RX."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB3 with JTDO/TRACESWO debug, SPI3_SCK, TIM2_CH2 and SPI1_SCK alternate functions."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB4 with NJTRST debug, SPI3_MISO, TIM3_CH1 and SPI1_MISO alternate functions."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5 (not 5 V-tolerant) with alternate functions I2C1_SMBA, SPI3_MOSI, TIM16_BKIN, TIM3_CH2 and SPI1_MOSI."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB6 with alternate functions I2C1_SCL, TIM4_CH1, TIM16_CH1N and USART1_TX."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB7 with alternate functions I2C1_SDA, TIM4_CH2, TIM17_CH1N and USART1_RX; the FSMC_NADV function listed for this pin is not available on LQFP64."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot selection input BOOT0 (input-only pin)."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB8 with alternate functions TIM4_CH3, TIM16_CH1, HDMI_CEC and I2C1_SCL."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) GPIO PB9 with alternate functions TIM4_CH4, TIM17_CH1 and I2C1_SDA."+ },+ {+ "number": "63",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Digital ground pin VSS_3."+ },+ {+ "number": "64",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply pin VDD_3; the application supply and I/Os operate from 2.0 to 3.6 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: In the extracted text of Table 4 the LQFP64 column is blank for VBAT, PC13, PC14 and PC15 (the rows ; Figure 5 (LQFP64 pinout) is garbled in the extracted text. Pin assignments come from the Table 4 LQF; Table 4 alternate-function columns (Default/Remap) are flattened in the extracted text. Descriptions"+ ],+ "pages_sent": 42,+ "cost_usd": 0.2281,+ "at": "2026-10-08T20:31:25"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589868609989074944",+ "pages": 107,+ "sha256": "37ac4e5d049f3b5d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32f100rdt6b.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f100rdt6b-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12,+ 12,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "62ebcaa6bb750d31b526f104fdecf7a976b2f34a3c31463e8bb37e4b771949fb",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}