Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F091CCU6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32F091CCU6TR from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply: VBAT = 1.65 to 3.6 V powers the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present. |
| 2 | PC13 | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF maximum load and it must not source LEDs; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) on the power-switch supply with the same 3 mA and 2 MHz / 30 pF limits as PC13, reset function PC14, additional function OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) on the power-switch supply with the same 3 mA and 2 MHz / 30 pF limits as PC13, reset function PC15, additional function OSC32_OUT. |
| 5 | PF0-OSC_IN | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions CRS_SYNC and I2C1_SDA, and additional function OSC_IN. |
| 6 | PF1-OSC_OUT | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate function I2C1_SCL, and additional function OSC_OUT. |
| 7 | NRST | bidirectional | Active-low device reset: bidirectional pin with embedded weak pull-up (RPU 25 to 55 kΩ) acting as device reset input and internal reset output. |
| 8 | VSSA | power_in | Analog ground. |
| 9 | VDDA | power_in | Analog power supply: VDDA must be equal to or higher than VDD, up to 3.6 V, and at least 2.4 V when the ADC or DAC is used. |
| 10 | PA0 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, USART4_TX, COMP1_OUT and additional functions RTC_TAMP2, WKUP1, ADC_IN0, COMP1_INM6. |
| 11 | PA1 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions EVENTOUT, USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX and additional functions ADC_IN1, COMP1_INP. |
| 12 | PA2 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions TIM15_CH1, USART2_TX, TIM2_CH3, TSC_G1_IO3, COMP2_OUT and additional functions ADC_IN2, WKUP4, COMP2_INM6. |
| 13 | PA3 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions TIM15_CH2, USART2_RX, TIM2_CH4, TSC_G1_IO4 and additional functions ADC_IN3, COMP2_INP. |
| 14 | PA4 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions SPI1_NSS, I2S1_WS, USART2_CK, TSC_G2_IO1, TIM14_CH1, USART6_TX and additional functions COMP1_INM4, COMP2_INM4, ADC_IN4, DAC_OUT1. |
| 15 | PA5 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2, USART6_RX and additional functions COMP1_INM5, COMP2_INM5, ADC_IN5, DAC_OUT2. |
| 16 | PA6 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS and additional function ADC_IN6. |
| 17 | PA7 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT and additional function ADC_IN7. |
| 18 | PB0 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK and additional function ADC_IN8. |
| 19 | PB1 | bidirectional | 3.3 V-tolerant I/O directly connected to ADC (TTa) with alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 and additional function ADC_IN9. |
| 20 | PB2 | bidirectional | 5 V-tolerant I/O (FT) with alternate function TSC_G3_IO4. |
| 21 | PB10 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3. |
| 22 | PB11 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA. |
| 23 | VSS | power_in | Ground; all voltages are referenced to VSS. |
| 24 | VDD | power_in | Digital power supply: VDD = 2.0 to 3.6 V, supplying the I/Os and the internal regulator. |
| 25 | PB12 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT. |
| 26 | PB13 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3. |
| 27 | PB14 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4. |
| 28 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2 and additional functions WKUP7, RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO, CRS_SYNC. |
| 30 | PA9 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, MCO, TSC_G4_IO1, I2C1_SCL. |
| 31 | PA10 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2, I2C1_SDA. |
| 32 | PA11 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT, I2C2_SCL. |
| 33 | PA12 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT, I2C2_SDA. |
| 34 | PA13 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2; after reset it is SWDIO with the internal pull-up activated, with alternate function IR_OUT. |
| 35 | VSS | power_in | Ground; all voltages are referenced to VSS. |
| 36 | VDDIO2 | power_in | I/O supply for marked I/Os: VDDIO2 = 1.65 to 3.6 V, must not be supplied without a valid VDD supply. |
| 37 | PA14 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2; after reset it is SWCLK with the internal pull-down activated, with alternate function USART2_TX. |
| 38 | PA15 | bidirectional | 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT. |
| 39 | PB3 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT, USART5_TX. |
| 40 | PB4 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT, USART5_RX. |
| 41 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2, USART5_CK_RTS and additional function WKUP6. |
| 42 | PB6 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3. |
| 43 | PB7 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4. |
| 44 | PF11-BOOT0 | bidirectional | 5 V-tolerant I/O (FT) used as BOOT0 for boot memory selection. |
| 45 | PB8 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX. |
| 46 | PB9 | bidirectional | 5 V-tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT, CAN_TX. |
| 47 | VSS | power_in | Ground; all voltages are referenced to VSS. |
| 48 | VDD | power_in | Digital power supply: VDD = 2.0 to 3.6 V, supplying the I/Os and the internal regulator. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDD-VSS | -0.3 | 4 | V | 52 | ||
| External I/O supply voltage | VDDIO2-VSS | -0.3 | 4 | V | 52 | ||
| External analog supply voltage | VDDA-VSS | -0.3 | 4 | V | 52 | ||
| Allowed voltage difference for VDD > VDDA | VDD-VDDA | 0.4 | V | VDD > VDDA | 52 | ||
| External backup supply voltage | VBAT-VSS | -0.3 | 4 | V | 52 | ||
| Input voltage on TTa pins | VIN | 4 | V | 52 | |||
| Input voltage on any other pin | VIN | 4 | V | 52 | |||
| Variations between different VDD power pins | /∆VDDx/ | 50 | mV | 52 | |||
| Variations between all the different ground pins | /VSSx - VSS/ | 50 | mV | 52 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 120 | mA | 53 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | -120 | mA | 53 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 53 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | -100 | mA | 53 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 25 | mA | 53 | |||
| Output current source by any I/O and control pin | IIO(PIN) | -25 | mA | 53 | |||
| Total output current sunk by sum of all I/Os and control pins | ΣIIO(PIN) | 80 | mA | 53 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO(PIN) | -80 | mA | 53 | |||
| Total output current sourced by sum of all I/Os supplied by VDDIO2 | ΣIIO(PIN) | -40 | mA | 53 | |||
| Injected current on FT and FTf pins | IINJ(PIN) | -5 | 0 | mA | 53 | ||
| Injected current on TC and RST pin | IINJ(PIN) | -5 | 5 | mA | 53 | ||
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | 53 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 53 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 53 | ||
| Maximum junction temperature | TJ | 150 | °C | 53 | |||
| Internal AHB clock frequency | fHCLK | 0 | 48 | MHz | 54 | ||
| Internal APB clock frequency | fPCLK | 0 | 48 | MHz | 54 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 54 | ||
| I/O supply voltage | VDDIO2 | 1.65 | 3.6 | V | Must not be supplied if VDD is not present | 54 | |
| Analog operating voltage (ADC and DAC not used) | VDDA | 3.6 | V | Must have a potential equal to or higher than VDD | 54 | ||
| Analog operating voltage (ADC and DAC used) | VDDA | 2.4 | 3.6 | V | ADC and DAC used | 54 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 54 | ||
| I/O input voltage | VIN | -0.3 | V | TC and RST I/O | 54 | ||
| I/O input voltage | VIN | -0.3 | 5.5 | V | FT and FTf I/O | 54 | |
| Power dissipation (UFQFPN48) | PD | 625 | mW | TA = 85 °C for suffix 6 | 54 | ||
| Ambient temperature for the suffix 6 version (maximum power dissipation) | TA | -40 | 85 | °C | Suffix 6 version; maximum power dissipation | 54 | |
| Ambient temperature for the suffix 6 version (low power dissipation) | TA | -40 | 105 | °C | Suffix 6 version; low power dissipation | 54 | |
| Junction temperature range | TJ | -40 | 105 | °C | Suffix 6 version | 54 | |
| VDD rise time rate | tVDD | 0 | µs/V | 55 | |||
| VDD fall time rate | tVDD | 20 | µs/V | 55 | |||
| VDDA rise time rate | tVDDA | 0 | µs/V | 55 | |||
| VDDA fall time rate | tVDDA | 20 | µs/V | 55 | |||
| Power on/power down reset threshold | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 55 |
| Power on/power down reset threshold | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 55 |
| Reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 55 | |
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.25 | V | -40 °C < TA < +105 °C | 56 |
| ADC_IN17 buffer startup time | tSTART | 10 | µs | 56 | |||
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | 56 | |||
| Internal reference voltage spread over the temperature range | ∆VREFINT | 10 | mV | VDDA = 3 V | 56 | ||
| Temperature coefficient | TCoeff | -100 | 100 | ppm/°C | 56 | ||
| PVD current consumption | IDD(PVD) | 0.15 | 0.26 | µA | 56 | ||
| Comparator hysteresis | Vhys | 3 | 8 | 13 | mV | COMPxHYST[1:0]=01; high speed mode | 92 |
| Comparator hysteresis | Vhys | 7 | 15 | 26 | mV | COMPxHYST[1:0]=10; high speed mode | 92 |
| Comparator hysteresis | Vhys | 18 | 31 | 49 | mV | COMPxHYST[1:0]=11; high speed mode | 92 |
| PVD threshold 0 rising edge | VPVD0 | 2.1 | 2.18 | 2.26 | V | Rising edge | 55 |
| PVD threshold 0 falling edge | VPVD0 | 2 | 2.08 | 2.16 | V | Falling edge | 55 |
| PVD threshold 3 rising edge | VPVD3 | 2.38 | 2.48 | 2.58 | V | Rising edge | 55 |
| PVD threshold 3 falling edge | VPVD3 | 2.28 | 2.38 | 2.48 | V | Falling edge | 55 |
| PVD threshold 7 rising edge | VPVD7 | 2.76 | 2.88 | 3 | V | Rising edge | 56 |
| PVD threshold 7 falling edge | VPVD7 | 2.66 | 2.78 | 2.9 | V | Falling edge | 56 |
CAD (KiCad official)
- Symbol:
STM32F091CCU6TR - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32f091ccu6tr-etched.step/stm32f091ccu6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f091ccu6tr.step/stm32f091ccu6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (128 pp, sha256
f96a82f50344c619, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).