main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32f091cct6: viewers rendered from the public page · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stm32f091cct6-etched.glb Publish 0.1.0 · Ray
stm32f091cct6-etched.step stm32f091cct6: factory component page (tier=lcsc) · Ray
stm32f091cct6-hero.glb stm32f091cct6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32f091cct6-hero.overlay.json Publish 0.1.0 · Ray
stm32f091cct6.glb Publish 0.1.0 · Ray
stm32f091cct6.kicad_mod Publish 0.1.0 · Ray
stm32f091cct6.kicad_sym Publish 0.1.0 · Ray
stm32f091cct6.lbr Publish 0.1.0 · Ray
stm32f091cct6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 48 pins · Ray

STM32F091CCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32F091CCT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply for the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present, specified at 1.65 to 3.6 V.
2 PC13 bidirectional Standard 3.3 V I/O (TC) supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with a 30 pF maximum load and it must not source current to an LED; also WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT.
3 PC14-OSC32_IN bidirectional Standard 3.3 V I/O (TC) supplied through the same 3 mA power switch as PC13 with the same output limits, and used as OSC32_IN for the 32.768 kHz LSE oscillator.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) supplied through the same 3 mA power switch as PC13 with the same output limits, and used as OSC32_OUT for the 32.768 kHz LSE oscillator.
5 PF0-OSC_IN bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions CRS_SYNC and I2C1_SDA, and used as OSC_IN for the 4 to 32 MHz external HSE oscillator.
6 PF1-OSC_OUT bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate function I2C1_SCL, and used as OSC_OUT for the external HSE oscillator.
7 NRST bidirectional Bidirectional active-low device reset input and internal reset output with an embedded weak pull-up of 25 to 55 kΩ (40 kΩ typical).
8 VSSA power_in Analog ground pin.
9 VDDA power_in Analog power supply, which must be equal to or higher than VDD, with a minimum of 2.4 V when the ADC or DAC is used and a maximum of 3.6 V.
10 PA0 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, USART4_TX and COMP1_OUT, and additional functions ADC_IN0, WKUP1, RTC_TAMP2 and COMP1_INM6.
11 PA1 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX and EVENTOUT, and additional functions ADC_IN1 and COMP1_INP.
12 PA2 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3 and COMP2_OUT, and additional functions ADC_IN2, WKUP4 and COMP2_INM6.
13 PA3 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions USART2_RX, TIM2_CH4, TIM15_CH2 and TSC_G1_IO4, and additional functions ADC_IN3 and COMP2_INP.
14 PA4 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions SPI1_NSS, I2S1_WS, USART2_CK, TSC_G2_IO1, TIM14_CH1 and USART6_TX, and additional functions ADC_IN4, DAC_OUT1, COMP1_INM4 and COMP2_INM4.
15 PA5 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 and USART6_RX, and additional functions ADC_IN5, DAC_OUT2, COMP1_INM5 and COMP2_INM5.
16 PA6 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT and USART3_CTS, and additional function ADC_IN6.
17 PA7 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4 and EVENTOUT, and additional function ADC_IN7.
18 PB0 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT and USART3_CK, and additional function ADC_IN8.
19 PB1 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, with alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N and TSC_G3_IO3, and additional function ADC_IN9.
20 PB2 bidirectional 5 V-tolerant I/O (FT) with alternate function TSC_G3_IO4.
21 PB10 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC and TIM2_CH3.
22 PB11 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 and I2C2_SDA.
23 VSS power_in Ground pin.
24 VDD power_in Digital power supply, 2.0 to 3.6 V, which also feeds the internal regulator.
25 PB12 bidirectional 5 V-tolerant I/O (FT) with alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2 and EVENTOUT.
26 PB13 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N and TSC_G6_IO3.
27 PB14 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1 and TSC_G6_IO4.
28 PB15 bidirectional 5 V-tolerant I/O (FT) with alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N and TIM15_CH2, and additional functions WKUP7 and RTC_REFIN.
29 PA8 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO and CRS_SYNC.
30 PA9 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, MCO, TSC_G4_IO1 and I2C1_SCL.
31 PA10 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 and I2C1_SDA.
32 PA11 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT and I2C2_SCL.
33 PA12 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT and I2C2_SDA.
34 PA13 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2 that after reset is the SWDIO alternate function with internal pull-up enabled, also with alternate function IR_OUT.
35 VSS power_in Ground pin.
36 VDDIO2 power_in Digital I/O supply for the marked I/Os, 1.65 to 3.6 V, which must not be supplied without a valid VDD supply.
37 PA14 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2 that after reset is the SWCLK alternate function with internal pull-down enabled, also with alternate function USART2_TX.
38 PA15 bidirectional 5 V-tolerant I/O (FT) supplied by VDDIO2, with alternate functions SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR and EVENTOUT.
39 PB3 bidirectional 5 V-tolerant I/O (FT) with alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT and USART5_TX.
40 PB4 bidirectional 5 V-tolerant I/O (FT) with alternate functions SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT and USART5_RX.
41 PB5 bidirectional 5 V-tolerant I/O (FT) with alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 and USART5_CK_RTS, and additional function WKUP6.
42 PB6 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N and TSC_G5_IO3.
43 PB7 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N and TSC_G5_IO4.
44 PF11-BOOT0 bidirectional 5 V-tolerant I/O (FT) that also provides the BOOT0 boot memory selection input.
45 PB8 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC and CAN_RX.
46 PB9 bidirectional 5 V-tolerant I/O (FTf, Fm+ capable) with alternate functions SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT and CAN_TX.
47 VSS power_in Ground pin.
48 VDD power_in Digital power supply, 2.0 to 3.6 V, which also feeds the internal regulator.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage VDD-VSS -0.3 4 V 52
External I/O supply voltage VDDIO2-VSS -0.3 4 V 52
External analog supply voltage VDDA-VSS -0.3 4 V 52
Allowed voltage difference for VDD > VDDA VDD-VDDA 0.4 V 52
External backup supply voltage VBAT-VSS -0.3 4 V 52
Input voltage on FT and FTf pins VIN -0.3 V Printed max VDDIOx + 4.0 (not numeric); valid only if internal pull-up/pull-down disabled, otherwise 4 V 52
Input voltage on TTa pins VIN -0.3 4 V 52
Input voltage on any other pin VIN -0.3 4 V 52
Variations between different VDD power pins /∆VDDx/ 50 mV 52
Variations between all the different ground pins /VSSx - VSS/ 50 mV 52
Total current into sum of all VDD power lines (source) ΣIVDD 120 mA 53
Total current out of sum of all VSS ground lines (sink) ΣIVSS -120 mA 53
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 53
Maximum current out of each VSS ground pin (sink) IVSS(PIN) -100 mA 53
Output current sunk by any I/O and control pin IIO(PIN) 25 mA 53
Output current sourced by any I/O and control pin IIO(PIN) -25 mA 53
Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) 80 mA 53
Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) -80 mA 53
Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) -40 mA 53
Injected current on FT and FTf pins IINJ(PIN) -5 0 mA 53
Injected current on TC and RST pin IINJ(PIN) -5 5 mA 53
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 53
Storage temperature range TSTG -65 150 °C 53
Maximum junction temperature TJ 150 °C 53
Internal AHB clock frequency fHCLK 0 48 MHz 54
Standard operating voltage VDD 2 3.6 V 54
I/O supply voltage VDDIO2 1.65 3.6 V Must not be supplied if VDD is not present 54
Analog operating voltage (ADC and DAC not used) VDDA 3.6 V Must have a potential equal to or higher than VDD 54
Analog operating voltage (ADC and DAC used) VDDA 2.4 3.6 V ADC and DAC used 54
Backup operating voltage VBAT 1.65 3.6 V 54
I/O input voltage on TC and RST I/O VIN -0.3 V Printed max VDDIOx+0.3 (not numeric) 54
I/O input voltage on TTa I/O VIN -0.3 V Printed max VDDA+0.3 (not numeric) 54
I/O input voltage on FT and FTf I/O VIN -0.3 5.5 V 54
Power dissipation LQFP48 at TA = 85 °C PD 370 mW TA = 85 °C for suffix 6 54
Ambient temperature suffix 6, maximum power dissipation TA -40 85 °C Suffix 6 version, maximum power dissipation 54
Ambient temperature suffix 6, low power dissipation TA -40 105 °C Suffix 6 version, low power dissipation 54
Junction temperature range suffix 6 TJ -40 105 °C Suffix 6 version 54
Power-on/power-down reset threshold, falling edge VPOR/PDR 1.8 1.88 1.96 V Falling edge 55
Power-on/power-down reset threshold, rising edge VPOR/PDR 1.84 1.92 2 V Rising edge 55
PDR hysteresis VPDRhyst 40 mV 55
Reset temporization tRSTTEMPO 1.5 2.5 4.5 ms Guaranteed by design, not tested in production 55
PVD threshold 0 rising edge VPVD0 2.1 2.18 2.26 V Rising edge 55
PVD threshold 0 falling edge VPVD0 2 2.08 2.16 V Falling edge 55
PVD threshold 7 rising edge VPVD7 2.76 2.88 3 V Rising edge 55
PVD threshold 7 falling edge VPVD7 2.66 2.78 2.9 V Falling edge 55
PVD hysteresis VPVDhyst 100 mV Guaranteed by design, not tested in production 55
Internal reference voltage VREFINT 1.2 1.23 1.25 V -40 °C < TA < +105 °C 56
Internal reference voltage spread over the temperature range ∆VREFINT 10 mV VDDA = 3 V 56
Temperature coefficient TCoeff -100 100 ppm/°C Guaranteed by design, not tested in production 56
Supply current in Run mode, code executing from Flash, HSI48, all peripherals enabled IDD 26.9 30.3 mA VDD = 3.6 V, 48 MHz; max at TA = 85 °C 58
Supply current in Run mode, code executing from Flash, HSI48, all peripherals disabled IDD 14.7 16.3 mA VDD = 3.6 V, 48 MHz; max at TA = 85 °C 58
Supply current in Sleep mode, HSI48, all peripherals enabled IDD 17 19.1 mA VDD = 3.6 V, 48 MHz; max at TA = 85 °C 58
Supply current in Stop mode, regulator in run mode, all oscillators OFF IDD 15.8 51 µA VDD = 3.6 V; max at TA = 85 °C 60
Supply current in Standby mode, LSI OFF and IWDG OFF IDD 1.1 2.3 µA VDD = 3.6 V; max at TA = 85 °C 60
HSI oscillator accuracy (factory calibrated) ACCHSI -2.8 3.8 % TA = -40 to 105 °C (data from characterization, not tested in production) 72
HSE oscillator frequency fOSC_IN 4 8 32 MHz 69
PLL multiplier output clock fPLL_OUT 16 48 MHz 75
16-bit programming time tprog 40 53.5 60 µs TA = -40 to +105 °C 75

CAD (KiCad official)

  • Symbol: STM32F091CCT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f091cct6-etched.step / stm32f091cct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f091cct6.step / stm32f091cct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (128 pp, sha256 f96a82f50344c619, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF