← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32F072RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F072RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply pin for RTC, external 32.768 kHz oscillator and backup registers, 1.65 V to 3.6 V. |+| 2 | PC13 | bidirectional | GPIO supplied through the internal power switch (limited to 2 MHz/30 pF in output mode, not usable as current source) with alternate functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT. |+| 3 | PC14-OSC32_IN (PC14) | bidirectional | GPIO supplied through the power switch, alternatively usable as OSC32_IN input for the 32.768 kHz LSE crystal oscillator. |+| 4 | PC15-OSC32_OUT (PC15) | bidirectional | GPIO supplied through the power switch, alternatively usable as OSC32_OUT for the 32.768 kHz LSE crystal oscillator. |+| 5 | PF0-OSC_IN (PF0) | bidirectional | 5 V-tolerant GPIO with CRS_SYNC alternate function, alternatively usable as OSC_IN for the 4-32 MHz HSE oscillator. |+| 6 | PF1-OSC_OUT (PF1) | bidirectional | 5 V-tolerant GPIO, alternatively usable as OSC_OUT for the 4-32 MHz HSE oscillator. |+| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor; active-low device reset input / internal reset output. |+| 8 | PC0 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN10 and EVENTOUT alternate function. |+| 9 | PC1 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN11 and EVENTOUT alternate function. |+| 10 | PC2 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN12, alternate functions SPI2_MISO/I2S2_MCK and EVENTOUT. |+| 11 | PC3 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN13, alternate functions SPI2_MOSI/I2S2_SD and EVENTOUT. |+| 12 | VSSA | power_in | Analog ground reference for the ADC, DAC, reset block, RC oscillators and PLL. |+| 13 | VDDA | power_in | External analog supply pin, from VDD to 3.6 V (minimum 2.4 V required when ADC or DAC is used). |+| 14 | PA0 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN0, WKUP1, RTC_TAMP2, COMP1_INM6, and alternate functions USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX. |+| 15 | PA1 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN1 and COMP1_INP, and alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT. |+| 16 | PA2 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN2, COMP2_INM6, WKUP4, and alternate functions USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3. |+| 17 | PA3 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN3 and COMP2_INP, and alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4. |+| 18 | VSS | power_in | Digital ground pin. |+| 19 | VDD | power_in | Digital power supply and internal regulator input, 2.0 V to 3.6 V. |+| 20 | PA4 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN4, DAC_OUT1, COMP1_INM4, COMP2_INM4, and alternate functions SPI1_NSS/I2S1_WS, USART2_CK, TIM14_CH1, TSC_G2_IO1. |+| 21 | PA5 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN5, DAC_OUT2, COMP1_INM5, COMP2_INM5, and alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2. |+| 22 | PA6 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN6, and alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS. |+| 23 | PA7 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN7, and alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT. |+| 24 | PC4 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN14, and alternate functions EVENTOUT, USART3_TX. |+| 25 | PC5 | bidirectional | 3.3 V ADC-tolerant GPIO with additional functions ADC_IN15 and WKUP5, and alternate functions TSC_G3_IO1, USART3_RX. |+| 26 | PB0 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN8, and alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK. |+| 27 | PB1 | bidirectional | 3.3 V ADC-tolerant GPIO with additional function ADC_IN9, and alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3. |+| 28 | PB2 | bidirectional | 5 V-tolerant GPIO with alternate function TSC_G3_IO4. |+| 29 | PB10 | bidirectional | 5 V-tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3. |+| 30 | PB11 | bidirectional | 5 V-tolerant GPIO with alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA. |+| 31 | VSS | power_in | Digital ground pin. |+| 32 | VDD | power_in | Digital power supply, 2.0 V to 3.6 V. |+| 33 | PB12 | bidirectional | 5 V-tolerant GPIO with alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT. |+| 34 | PB13 | bidirectional | 5 V-tolerant, FM+ capable GPIO with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3. |+| 35 | PB14 | bidirectional | 5 V-tolerant, FM+ capable GPIO with alternate functions SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4. |+| 36 | PB15 | bidirectional | 5 V-tolerant GPIO with additional functions WKUP7, RTC_REFIN, and alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2. |+| 37 | PC6 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH1. |+| 38 | PC7 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH2. |+| 39 | PC8 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH3. |+| 40 | PC9 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH4. |+| 41 | PA8 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions MCO, USART1_CK, TIM1_CH1, EVENTOUT, CRS_SYNC. |+| 42 | PA9 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions TIM15_BKIN, USART1_TX, TIM1_CH2, TSC_G4_IO1. |+| 43 | PA10 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions TIM17_BKIN, USART1_RX, TIM1_CH3, TSC_G4_IO2. |+| 44 | PA11 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with additional function USB_DM, and alternate functions EVENTOUT, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, CAN_RX. |+| 45 | PA12 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with additional function USB_DP, and alternate functions EVENTOUT, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, CAN_TX. |+| 46 | PA13 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2, configured after reset as SWDIO with internal pull-up activated; alternate functions IR_OUT, USB_NOE. |+| 47 | VSS | power_in | Digital ground pin. |+| 48 | VDDIO2 | power_in | External digital power supply for the marked 5 V-tolerant I/Os, 1.65 V to 3.6 V, independent of VDD/VDDA but must not be supplied without a valid VDD. |+| 49 | PA14 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2, configured after reset as SWCLK with internal pull-down activated; alternate function USART2_TX. |+| 50 | PA15 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT. |+| 51 | PC10 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_TX, USART4_TX. |+| 52 | PC11 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_RX, USART4_RX. |+| 53 | PC12 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_CK, USART4_CK. |+| 54 | PD2 | bidirectional | 5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_RTS, TIM3_ETR. |+| 55 | PB3 | bidirectional | 5 V-tolerant GPIO with alternate functions SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT. |+| 56 | PB4 | bidirectional | 5 V-tolerant GPIO with alternate functions SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT. |+| 57 | PB5 | bidirectional | 5 V-tolerant GPIO with additional function WKUP6, and alternate functions SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2. |+| 58 | PB6 | bidirectional | 5 V-tolerant, FM+ capable GPIO used for USART1 bootloader entry, with alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3. |+| 59 | PB7 | bidirectional | 5 V-tolerant, FM+ capable GPIO used for I2C bootloader entry, with alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4. |+| 60 | BOOT0 | input | Dedicated boot memory selection pin, sampled at reset (input range 0 to 9.0 V absolute maximum) to select the boot source. |+| 61 | PB8 | bidirectional | 5 V-tolerant, FM+ capable GPIO with alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX. |+| 62 | PB9 | bidirectional | 5 V-tolerant, FM+ capable GPIO with alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT, CAN_TX. |+| 63 | VSS | power_in | Digital ground pin. |+| 64 | VDD | power_in | Digital power supply, 2.0 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F072RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f072rbt6-etched.step` / `stm32f072rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f072rbt6.step` / `stm32f072rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175264691007488) (135 pp, sha256 `026abcc24a1196f2`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f072rbt6-datasheet.pdf)
page.jsonadded+480@@ -0,0 +1,480 @@+{+ "slug": "stm32f072rbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f072rbt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f072rbt6.kicad_sym",+ "stm32f072rbt6.kicad_mod",+ "stm32f072rbt6.glb",+ "stm32f072rbt6.step",+ "stm32f072rbt6.lbr",+ "docs/hero.png",+ "docs/stm32f072rbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F072RBT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175264691007488",+ "parts": {+ "symbol": "stm32f072rbt6.kicad_sym",+ "footprint": "stm32f072rbt6.kicad_mod",+ "model_3d": "stm32f072rbt6-etched.glb",+ "model_3d_plain": "stm32f072rbt6.glb",+ "model_3d_step": "stm32f072rbt6-etched.step",+ "model_3d_step_plain": "stm32f072rbt6.step",+ "lbr": "stm32f072rbt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C46046"+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup power supply pin for RTC, external 32.768 kHz oscillator and backup registers, 1.65 V to 3.6 V."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "GPIO supplied through the internal power switch (limited to 2 MHz/30 pF in output mode, not usable as current source) with alternate functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN (PC14)",+ "type": "bidirectional",+ "description": "GPIO supplied through the power switch, alternatively usable as OSC32_IN input for the 32.768 kHz LSE crystal oscillator."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT (PC15)",+ "type": "bidirectional",+ "description": "GPIO supplied through the power switch, alternatively usable as OSC32_OUT for the 32.768 kHz LSE crystal oscillator."+ },+ {+ "number": "5",+ "name": "PF0-OSC_IN (PF0)",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with CRS_SYNC alternate function, alternatively usable as OSC_IN for the 4-32 MHz HSE oscillator."+ },+ {+ "number": "6",+ "name": "PF1-OSC_OUT (PF1)",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO, alternatively usable as OSC_OUT for the 4-32 MHz HSE oscillator."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up resistor; active-low device reset input / internal reset output."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN10 and EVENTOUT alternate function."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN11 and EVENTOUT alternate function."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN12, alternate functions SPI2_MISO/I2S2_MCK and EVENTOUT."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN13, alternate functions SPI2_MOSI/I2S2_SD and EVENTOUT."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference for the ADC, DAC, reset block, RC oscillators and PLL."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "External analog supply pin, from VDD to 3.6 V (minimum 2.4 V required when ADC or DAC is used)."+ },+ {+ "number": "14",+ "name": "PA0",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN0, WKUP1, RTC_TAMP2, COMP1_INM6, and alternate functions USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN1 and COMP1_INP, and alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN2, COMP2_INM6, WKUP4, and alternate functions USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN3 and COMP2_INP, and alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground pin."+ },+ {+ "number": "19",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply and internal regulator input, 2.0 V to 3.6 V."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN4, DAC_OUT1, COMP1_INM4, COMP2_INM4, and alternate functions SPI1_NSS/I2S1_WS, USART2_CK, TIM14_CH1, TSC_G2_IO1."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN5, DAC_OUT2, COMP1_INM5, COMP2_INM5, and alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN6, and alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN7, and alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN14, and alternate functions EVENTOUT, USART3_TX."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional functions ADC_IN15 and WKUP5, and alternate functions TSC_G3_IO1, USART3_RX."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN8, and alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "3.3 V ADC-tolerant GPIO with additional function ADC_IN9, and alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3."+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with alternate function TSC_G3_IO4."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3."+ },+ {+ "number": "30",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA."+ },+ {+ "number": "31",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground pin."+ },+ {+ "number": "32",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 V to 3.6 V."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant, FM+ capable GPIO with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant, FM+ capable GPIO with alternate functions SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with additional functions WKUP7, RTC_REFIN, and alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH1."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH2."+ },+ {+ "number": "39",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH3."+ },+ {+ "number": "40",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate function TIM3_CH4."+ },+ {+ "number": "41",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions MCO, USART1_CK, TIM1_CH1, EVENTOUT, CRS_SYNC."+ },+ {+ "number": "42",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions TIM15_BKIN, USART1_TX, TIM1_CH2, TSC_G4_IO1."+ },+ {+ "number": "43",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions TIM17_BKIN, USART1_RX, TIM1_CH3, TSC_G4_IO2."+ },+ {+ "number": "44",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with additional function USB_DM, and alternate functions EVENTOUT, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, CAN_RX."+ },+ {+ "number": "45",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with additional function USB_DP, and alternate functions EVENTOUT, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, CAN_TX."+ },+ {+ "number": "46",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2, configured after reset as SWDIO with internal pull-up activated; alternate functions IR_OUT, USB_NOE."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground pin."+ },+ {+ "number": "48",+ "name": "VDDIO2",+ "type": "power_in",+ "description": "External digital power supply for the marked 5 V-tolerant I/Os, 1.65 V to 3.6 V, independent of VDD/VDDA but must not be supplied without a valid VDD."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2, configured after reset as SWCLK with internal pull-down activated; alternate function USART2_TX."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_TX, USART4_TX."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_RX, USART4_RX."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_CK, USART4_CK."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO supplied by VDDIO2 with alternate functions USART3_RTS, TIM3_ETR."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with alternate functions SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with alternate functions SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with additional function WKUP6, and alternate functions SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant, FM+ capable GPIO used for USART1 bootloader entry, with alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant, FM+ capable GPIO used for I2C bootloader entry, with alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated boot memory selection pin, sampled at reset (input range 0 to 9.0 V absolute maximum) to select the boot source."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant, FM+ capable GPIO with alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant, FM+ capable GPIO with alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT, CAN_TX."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground pin."+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 2.0 V to 3.6 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-sonnet-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-4-8",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The final user turn requested re-reading the LQFP64/package outline page images to obtain pin-to-num",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 135,+ "cost_usd": 2.712,+ "at": "2026-09-23T22:10:12"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586175264691007488",+ "pages": 135,+ "sha256": "026abcc24a1196f2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}