← Commit history

Initial commit: component/stm32f071cbu6

Ray ·e44f9c9760 ·
2 files changed +491
README.mdadded+85
@@ -0,0 +1,85 @@+# STM32F071CBU6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)++STM32F071CBU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply for RTC, 32 kHz oscillator and backup registers, 1.65 to 3.6 V when VDD is not present. |+| 2 | PC13 | bidirectional | TC I/O supplied through the power switch (3 mA sink limit), output speed max 2 MHz with 30 pF load and not usable as a current source; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT. |+| 3 | PC14-OSC32_IN | bidirectional | TC I/O (PC14) supplied through the power switch with 2 MHz/30 pF output limit, also the OSC32_IN 32 kHz oscillator input. |+| 4 | PC15-OSC32_OUT | bidirectional | TC I/O (PC15) supplied through the power switch with 2 MHz/30 pF output limit, also the OSC32_OUT 32 kHz oscillator output. |+| 5 | PF0-OSC_IN | bidirectional | 5 V-tolerant I/O with alternate function CRS_SYNC, also the OSC_IN main oscillator input. |+| 6 | PF1-OSC_OUT | bidirectional | 5 V-tolerant I/O, also the OSC_OUT main oscillator output. |+| 7 | NRST | bidirectional | Device reset input / internal reset output (active low), bidirectional with embedded weak pull-up. |+| 8 | VSSA | power_in | Analog ground. |+| 9 | VDDA | power_in | Analog power supply from VDD to 3.6 V, minimum 2.4 V when ADC or DAC is used; must be established first and be at or above VDD. |+| 10 | PA0 | bidirectional | TTa I/O with USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, USART4_TX; additional RTC_TAMP2, WKUP1, COMP1_OUT, ADC_IN0, COMP1_INM6. |+| 11 | PA1 | bidirectional | TTa I/O with USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT; additional ADC_IN1, COMP1_INP. |+| 12 | PA2 | bidirectional | TTa I/O with USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3; additional ADC_IN2, COMP2_OUT, COMP2_INM6, WKUP4. |+| 13 | PA3 | bidirectional | TTa I/O with USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional ADC_IN3, COMP2_INP. |+| 14 | PA4 | bidirectional | TTa I/O with SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK; additional COMP1_INM4, COMP2_INM4, ADC_IN4, DAC_OUT1. |+| 15 | PA5 | bidirectional | TTa I/O with SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional COMP1_INM5, COMP2_INM5, ADC_IN5, DAC_OUT2. |+| 16 | PA6 | bidirectional | TTa I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS; additional ADC_IN6. |+| 17 | PA7 | bidirectional | TTa I/O with SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT; additional ADC_IN7. |+| 18 | PB0 | bidirectional | TTa I/O with TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK; additional ADC_IN8. |+| 19 | PB1 | bidirectional | TTa I/O with TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3; additional ADC_IN9. |+| 20 | PB2 | bidirectional | 5 V-tolerant I/O with TSC_G3_IO4. |+| 21 | PB10 | bidirectional | 5 V-tolerant I/O with SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3. |+| 22 | PB11 | bidirectional | 5 V-tolerant I/O with USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA. |+| 23 | VSS | power_in | Ground. |+| 24 | VDD | power_in | Digital power supply, 2.0 to 3.6 V. |+| 25 | PB12 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT. |+| 26 | PB13 | bidirectional | 5 V-tolerant FM+ capable I/O with SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3. |+| 27 | PB14 | bidirectional | 5 V-tolerant FM+ capable I/O with SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4. |+| 28 | PB15 | bidirectional | 5 V-tolerant I/O with SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2; additional WKUP7, RTC_REFIN. |+| 29 | PA8 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 with USART1_CK, TIM1_CH1, EVENTOUT, MCO, CRS_SYNC. |+| 30 | PA9 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 with USART1_TX, TIM1_CH2, TIM15_BKIN, TSC_G4_IO1. |+| 31 | PA10 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 with USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2. |+| 32 | PA11 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 with USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT. |+| 33 | PA12 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 with USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT. |+| 34 | PA13 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2, SWDIO after reset with internal pull-up activated; also IR_OUT. |+| 35 | VSS | power_in | Ground. |+| 36 | VDDIO2 | power_in | Digital supply for the I/Os marked as VDDIO2, 1.65 to 3.6 V, independent of VDD but not to be provided without valid VDD. |+| 37 | PA14 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2, SWCLK after reset with internal pull-down activated; also USART2_TX. |+| 38 | PA15 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 with SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT. |+| 39 | PB3 | bidirectional | 5 V-tolerant I/O with SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT. |+| 40 | PB4 | bidirectional | 5 V-tolerant I/O with SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT. |+| 41 | PB5 | bidirectional | 5 V-tolerant I/O with SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional WKUP6. |+| 42 | PB6 | bidirectional | 5 V-tolerant FM+ capable I/O with I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3. |+| 43 | PB7 | bidirectional | 5 V-tolerant FM+ capable I/O with I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4. |+| 44 | BOOT0 | input | Dedicated boot memory selection input. |+| 45 | PB8 | bidirectional | 5 V-tolerant FM+ capable I/O with I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC. |+| 46 | PB9 | bidirectional | 5 V-tolerant FM+ capable I/O with SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT. |+| 47 | VSS | power_in | Ground. |+| 48 | VDD | power_in | Digital power supply, 2.0 to 3.6 V. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | UFQFPN-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `STM32F071CBU6`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f071cbu6-etched.step` / `stm32f071cbu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f071cbu6.step` / `stm32f071cbu6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906515201724416) (122 pp, sha256 `054f3806403d4305`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f071cbu6-datasheet.pdf)
page.jsonadded+406
@@ -0,0 +1,406 @@+{+  "slug": "stm32f071cbu6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f071cbu6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f071cbu6.kicad_sym",+    "stm32f071cbu6.kicad_mod",+    "stm32f071cbu6.glb",+    "stm32f071cbu6.step",+    "stm32f071cbu6.lbr",+    "docs/hero.png",+    "docs/stm32f071cbu6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "stm32f071cbu6-hero.glb",+    "stm32f071cbu6-hero.overlay.json"+  ],+  "component": {+    "mpn": "STM32F071CBU6",+    "manufacturer": "STMicroelectronics",+    "package": "UFQFPN-48(7x7)",+    "pin_count": 49,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906515201724416",+    "parts": {+      "symbol": "stm32f071cbu6.kicad_sym",+      "footprint": "stm32f071cbu6.kicad_mod",+      "model_3d": "stm32f071cbu6-hero.glb",+      "model_3d_plain": "stm32f071cbu6.glb",+      "model_3d_step": "stm32f071cbu6-etched.step",+      "model_3d_step_plain": "stm32f071cbu6.step",+      "lbr": "stm32f071cbu6.lbr"+    },+    "distributor_links": {+      "lcsc": 1337276,+      "digikey": "497-17356-ND",+      "mouser": "511-STM32F071CBU6"+    },+    "distributor_check": {+      "checked_at": "2026-10-03T02:14:37Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-17356-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32F071CBU6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply for RTC, 32 kHz oscillator and backup registers, 1.65 to 3.6 V when VDD is not present."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "TC I/O supplied through the power switch (3 mA sink limit), output speed max 2 MHz with 30 pF load and not usable as a current source; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "TC I/O (PC14) supplied through the power switch with 2 MHz/30 pF output limit, also the OSC32_IN 32 kHz oscillator input."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "TC I/O (PC15) supplied through the power switch with 2 MHz/30 pF output limit, also the OSC32_OUT 32 kHz oscillator output."+      },+      {+        "number": "5",+        "name": "PF0-OSC_IN",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with alternate function CRS_SYNC, also the OSC_IN main oscillator input."+      },+      {+        "number": "6",+        "name": "PF1-OSC_OUT",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O, also the OSC_OUT main oscillator output."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Device reset input / internal reset output (active low), bidirectional with embedded weak pull-up."+      },+      {+        "number": "8",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "9",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply from VDD to 3.6 V, minimum 2.4 V when ADC or DAC is used; must be established first and be at or above VDD."+      },+      {+        "number": "10",+        "name": "PA0",+        "type": "bidirectional",+        "description": "TTa I/O with USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, USART4_TX; additional RTC_TAMP2, WKUP1, COMP1_OUT, ADC_IN0, COMP1_INM6."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "TTa I/O with USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT; additional ADC_IN1, COMP1_INP."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "TTa I/O with USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3; additional ADC_IN2, COMP2_OUT, COMP2_INM6, WKUP4."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "TTa I/O with USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional ADC_IN3, COMP2_INP."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "TTa I/O with SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK; additional COMP1_INM4, COMP2_INM4, ADC_IN4, DAC_OUT1."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "TTa I/O with SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional COMP1_INM5, COMP2_INM5, ADC_IN5, DAC_OUT2."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "TTa I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS; additional ADC_IN6."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "TTa I/O with SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT; additional ADC_IN7."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "TTa I/O with TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK; additional ADC_IN8."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "TTa I/O with TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3; additional ADC_IN9."+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TSC_G3_IO4."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3."+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply, 2.0 to 3.6 V."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O with SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O with SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2; additional WKUP7, RTC_REFIN."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2 with USART1_CK, TIM1_CH1, EVENTOUT, MCO, CRS_SYNC."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2 with USART1_TX, TIM1_CH2, TIM15_BKIN, TSC_G4_IO1."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2 with USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2."+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2 with USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT."+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2 with USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT."+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2, SWDIO after reset with internal pull-up activated; also IR_OUT."+      },+      {+        "number": "35",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "36",+        "name": "VDDIO2",+        "type": "power_in",+        "description": "Digital supply for the I/Os marked as VDDIO2, 1.65 to 3.6 V, independent of VDD but not to be provided without valid VDD."+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2, SWCLK after reset with internal pull-down activated; also USART2_TX."+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O supplied by VDDIO2 with SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT."+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O with SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional WKUP6."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O with I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O with I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4."+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot memory selection input."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O with I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O with SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply, 2.0 to 3.6 V."+      },+      {+        "number": "49",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Figure 8 shows signal labels in sequence but pin numbering appears non-sequential for unused pins 2-; Pins 31-48 show different I/O types and alternate functions than pins 15-30; some assignments need c",+          "exposed pad 49 added from the footprint"+        ],+        "pages_sent": 60,+        "cost_usd": 0.4573,+        "at": "2026-10-03T02:14:08"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906515201724416",+        "pages": 122,+        "sha256": "054f3806403d4305",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 49,+        "described": 49,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file