← Commit history

Initial commit: component/stm32f071cbt6tr

Ray ·46b245f6c6 ·
2 files changed +468
README.mdadded+84
@@ -0,0 +1,84 @@+# STM32F071CBT6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F071CBT6TR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply (1.65 V to 3.6 V) for RTC, external 32 kHz oscillator and backup registers when VDD is not present. |+| 2 | PC13 | bidirectional | General-purpose I/O (TC, 5V not tolerant standard) supplied through the RTC power switch (limited to 3 mA sink, ≤2 MHz output, ≤30 pF load); after first RTC domain power-up also provides WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT functions. |+| 3 | PC14-OSC32_IN | bidirectional | GPIO (PC14, TC) supplied through the RTC power switch, or LSE 32.768 kHz crystal oscillator input (OSC32_IN). |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO (PC15, TC) supplied through the RTC power switch, or LSE 32.768 kHz crystal oscillator output (OSC32_OUT). |+| 5 | PF0-OSC_IN | bidirectional | 5V-tolerant GPIO (PF0) or HSE 4-32 MHz crystal/resonator oscillator input (OSC_IN); alternate function CRS_SYNC. |+| 6 | PF1-OSC_OUT | bidirectional | 5V-tolerant GPIO (PF1) or HSE crystal/resonator oscillator output (OSC_OUT). |+| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (RPU typ. 40 kΩ): device reset input / internal reset output, active low. |+| 8 | VSSA | power_in | Analog ground reference for ADC, DAC, comparators and clock/PLL analog blocks. |+| 9 | VDDA | power_in | External analog power supply for ADC, DAC, reset block, RC oscillators and PLL; must be ≥VDD, range VDD to 3.6 V (2.4 V to 3.6 V minimum when ADC or DAC is used). |+| 10 | PA0 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, USART4_TX; additional functions RTC_TAMP2, WKUP1, COMP1_OUT, ADC_IN0, COMP1_INM6. |+| 11 | PA1 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT; additional functions ADC_IN1, COMP1_INP. |+| 12 | PA2 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3; additional functions ADC_IN2, COMP2_OUT, COMP2_INM6, WKUP4. |+| 13 | PA3 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional functions ADC_IN3, COMP2_INP. |+| 14 | PA4 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions SPI1_NSS/I2S1_WS, USART2_CK, TSC_G2_IO1, TIM14_CH1; additional functions COMP1_INM4, COMP2_INM4, ADC_IN4, DAC_OUT1. |+| 15 | PA5 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional functions COMP1_INM5, COMP2_INM5, ADC_IN5, DAC_OUT2. |+| 16 | PA6 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS; additional function ADC_IN6. |+| 17 | PA7 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT; additional function ADC_IN7. |+| 18 | PB0 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK; additional function ADC_IN8. |+| 19 | PB1 | bidirectional | 3.3V ADC-capable I/O (TTa): alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3; additional function ADC_IN9. |+| 20 | PB2 | bidirectional | 5V-tolerant GPIO (FT) with alternate function TSC_G3_IO4. |+| 21 | PB10 | bidirectional | 5V-tolerant GPIO (FT): alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3. |+| 22 | PB11 | bidirectional | 5V-tolerant GPIO (FT): alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA. |+| 23 | VSS | power_in | Digital ground. |+| 24 | VDD | power_in | Digital power supply, VDD = 2.0 V to 3.6 V for I/Os and internal regulator. |+| 25 | PB12 | bidirectional | 5V-tolerant GPIO (FT): alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT. |+| 26 | PB13 | bidirectional | 5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3. |+| 27 | PB14 | bidirectional | 5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4. |+| 28 | PB15 | bidirectional | 5V-tolerant GPIO (FT): alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2; additional functions WKUP7, RTC_REFIN. |+| 29 | PA8 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions MCO, USART1_CK, TIM1_CH1, EVENTOUT, CRS_SYNC. |+| 30 | PA9 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions TIM15_BKIN, USART1_TX, TIM1_CH2, TSC_G4_IO1. |+| 31 | PA10 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions TIM17_BKIN, USART1_RX, TIM1_CH3, TSC_G4_IO2. |+| 32 | PA11 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions EVENTOUT, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3. |+| 33 | PA12 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions EVENTOUT, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4. |+| 34 | PA13 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2; after reset configured as SWDIO alternate function with internal pull-up active; also IR_OUT alternate function. |+| 35 | VSS | power_in | Digital ground. |+| 36 | VDDIO2 | power_in | External I/O power supply, VDDIO2 = 1.65 V to 3.6 V, for marked (5V-tolerant, FT) I/Os; must not be supplied without a valid VDD supply. |+| 37 | PA14 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2; after reset configured as SWCLK alternate function with internal pull-down active; also USART2_TX alternate function. |+| 38 | PA15 | bidirectional | 5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT. |+| 39 | PB3 | bidirectional | 5V-tolerant GPIO (FT): alternate functions SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT. |+| 40 | PB4 | bidirectional | 5V-tolerant GPIO (FT): alternate functions SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT. |+| 41 | PB5 | bidirectional | 5V-tolerant GPIO (FT): alternate functions SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional function WKUP6. |+| 42 | PB6 | bidirectional | 5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3. |+| 43 | PB7 | bidirectional | 5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4. |+| 44 | BOOT0 | input | Dedicated boot memory selection input; input voltage range 0 to 5.5 V operating (0 to 9.0 V absolute maximum), sampled at reset to select boot from Flash, System memory or SRAM. |+| 45 | PB8 | bidirectional | 5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC. |+| 46 | PB9 | bidirectional | 5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT. |+| 47 | VSS | power_in | Digital ground. |+| 48 | VDD | power_in | Digital power supply, VDD = 2.0 V to 3.6 V for I/Os and internal regulator. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F071CBT6TR`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f071cbt6tr-etched.step` / `stm32f071cbt6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f071cbt6tr.step` / `stm32f071cbt6tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942900474757120) (122 pp, sha256 `054f3806403d4305`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f071cbt6tr-datasheet.pdf)
page.jsonadded+384
@@ -0,0 +1,384 @@+{+  "slug": "stm32f071cbt6tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f071cbt6tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f071cbt6tr.kicad_sym",+    "stm32f071cbt6tr.kicad_mod",+    "stm32f071cbt6tr.glb",+    "stm32f071cbt6tr.step",+    "stm32f071cbt6tr.lbr",+    "docs/hero.png",+    "docs/stm32f071cbt6tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F071CBT6TR",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942900474757120",+    "parts": {+      "symbol": "stm32f071cbt6tr.kicad_sym",+      "footprint": "stm32f071cbt6tr.kicad_mod",+      "model_3d": "stm32f071cbt6tr-etched.glb",+      "model_3d_plain": "stm32f071cbt6tr.glb",+      "model_3d_step": "stm32f071cbt6tr-etched.step",+      "model_3d_step_plain": "stm32f071cbt6tr.step",+      "lbr": "stm32f071cbt6tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2053369"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply (1.65 V to 3.6 V) for RTC, external 32 kHz oscillator and backup registers when VDD is not present."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "General-purpose I/O (TC, 5V not tolerant standard) supplied through the RTC power switch (limited to 3 mA sink, ≤2 MHz output, ≤30 pF load); after first RTC domain power-up also provides WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT functions."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO (PC14, TC) supplied through the RTC power switch, or LSE 32.768 kHz crystal oscillator input (OSC32_IN)."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO (PC15, TC) supplied through the RTC power switch, or LSE 32.768 kHz crystal oscillator output (OSC32_OUT)."+      },+      {+        "number": "5",+        "name": "PF0-OSC_IN",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (PF0) or HSE 4-32 MHz crystal/resonator oscillator input (OSC_IN); alternate function CRS_SYNC."+      },+      {+        "number": "6",+        "name": "PF1-OSC_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (PF1) or HSE crystal/resonator oscillator output (OSC_OUT)."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with embedded weak pull-up resistor (RPU typ. 40 kΩ): device reset input / internal reset output, active low."+      },+      {+        "number": "8",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference for ADC, DAC, comparators and clock/PLL analog blocks."+      },+      {+        "number": "9",+        "name": "VDDA",+        "type": "power_in",+        "description": "External analog power supply for ADC, DAC, reset block, RC oscillators and PLL; must be ≥VDD, range VDD to 3.6 V (2.4 V to 3.6 V minimum when ADC or DAC is used)."+      },+      {+        "number": "10",+        "name": "PA0",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, USART4_TX; additional functions RTC_TAMP2, WKUP1, COMP1_OUT, ADC_IN0, COMP1_INM6."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT; additional functions ADC_IN1, COMP1_INP."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, TSC_G1_IO3; additional functions ADC_IN2, COMP2_OUT, COMP2_INM6, WKUP4."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4; additional functions ADC_IN3, COMP2_INP."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions SPI1_NSS/I2S1_WS, USART2_CK, TSC_G2_IO1, TIM14_CH1; additional functions COMP1_INM4, COMP2_INM4, ADC_IN4, DAC_OUT1."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2; additional functions COMP1_INM5, COMP2_INM5, ADC_IN5, DAC_OUT2."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS; additional function ADC_IN6."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT; additional function ADC_IN7."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK; additional function ADC_IN8."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "3.3V ADC-capable I/O (TTa): alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3; additional function ADC_IN9."+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) with alternate function TSC_G3_IO4."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC, TIM2_CH3."+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1, I2C2_SDA."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply, VDD = 2.0 V to 3.6 V for I/Os and internal regulator."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2, EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N, TSC_G6_IO3."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1, TSC_G6_IO4."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2; additional functions WKUP7, RTC_REFIN."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions MCO, USART1_CK, TIM1_CH1, EVENTOUT, CRS_SYNC."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions TIM15_BKIN, USART1_TX, TIM1_CH2, TSC_G4_IO1."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions TIM17_BKIN, USART1_RX, TIM1_CH3, TSC_G4_IO2."+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions EVENTOUT, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3."+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions EVENTOUT, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4."+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2; after reset configured as SWDIO alternate function with internal pull-up active; also IR_OUT alternate function."+      },+      {+        "number": "35",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "36",+        "name": "VDDIO2",+        "type": "power_in",+        "description": "External I/O power supply, VDDIO2 = 1.65 V to 3.6 V, for marked (5V-tolerant, FT) I/Os; must not be supplied without a valid VDD supply."+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2; after reset configured as SWCLK alternate function with internal pull-down active; also USART2_TX alternate function."+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT) supplied from VDDIO2: alternate functions SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT."+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO (FT): alternate functions SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional function WKUP6."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N, TSC_G5_IO4."+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot memory selection input; input voltage range 0 to 5.5 V operating (0 to 9.0 V absolute maximum), sampled at reset to select boot from Flash, System memory or SRAM."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5V-tolerant Fast-mode-Plus-capable GPIO (FTf): alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply, VDD = 2.0 V to 3.6 V for I/Os and internal regulator."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Table 14 LQFP48 column shows inconsistent values (e.g., LQFP48 listed as 13 for PA3, D5 for PC13, B7; PC13, PC14-OSC32_IN, and PC15-OSC32_OUT pins are powered through the RTC power switch with maximum 3; Pins PA8-PA15, PC6-PC12, and PD0-PD2 are supplied from VDDIO2 domain and show VDDIO2 marking in Figu",+          "8/48 pins cited to the wrong page (name found elsewhere): ['16:PA12@p40', '17:PA11@p40', '18:PA10@p40', '19:PA9@p40']"+        ],+        "pages_sent": 122,+        "cost_usd": 1.2347,+        "at": "2026-09-22T21:11:28"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942900474757120",+        "pages": 122,+        "sha256": "054f3806403d4305",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file