main
Ray
Publish 0.1.0
80e83cc
STM32F051K8U6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32F051K8U6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital power supply pin for the I/Os and core, with VDD specified from 2.0 V to 3.6 V. |
| 2 | PF0-OSC_IN (PF0) | bidirectional | 5 V tolerant (FT) I/O that also serves as the OSC_IN input for the 4 to 32 MHz crystal oscillator. |
| 3 | PF1-OSC_OUT (PF1) | bidirectional | 5 V tolerant (FT) I/O that also serves as the OSC_OUT output for the 4 to 32 MHz crystal oscillator. |
| 4 | NRST | bidirectional | Active-low bidirectional device reset input and internal reset output with embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog power supply pin, with VDDA specified from VDD up to 3.6 V. |
| 6 | PA0 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN0 and WKUP1 functions. |
| 7 | PA1 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN1 and COMP1_INP functions. |
| 8 | PA2 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN2 and COMP2_INM6 functions. |
| 9 | PA3 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN3 and COMP2_INP functions. |
| 10 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN4 and DAC_OUT1 functions. |
| 11 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN5 and touch sensing group 2 function. |
| 12 | PA6 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN6 and TIM3_CH1 or TIM1_BKIN alternate functions. |
| 13 | PA7 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN7 and TIM3_CH2 or TIM1_CH1N alternate functions. |
| 14 | PB0 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN8 and TIM3_CH3 or TIM1_CH2N alternate functions. |
| 15 | PB1 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN9 and TIM3_CH4 or TIM14_CH1 alternate functions. |
| 16 | PB2 | bidirectional | 5 V tolerant (FT) I/O with TSC_G3_IO4 touch sensing function. |
| 17 | VDD | power_in | Digital power supply pin for the I/Os and core, with VDD specified from 2.0 V to 3.6 V. |
| 18 | PA8 | bidirectional | 5 V tolerant (FT) I/O with USART1_CK, TIM1_CH1 and MCO alternate functions. |
| 19 | PA9 | bidirectional | 5 V tolerant (FT) I/O with USART1_TX, TIM1_CH2 and TSC_G4_IO1 alternate functions. |
| 20 | PA10 | bidirectional | 5 V tolerant (FT) I/O with USART1_RX, TIM1_CH3 and TSC_G4_IO2 alternate functions. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O with USART1_CTS, TIM1_CH4 and COMP1_OUT alternate functions. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O with USART1_RTS, TIM1_ETR and COMP2_OUT alternate functions. |
| 23 | PA13 (SWDIO) | bidirectional | 5 V tolerant (FT) I/O that is configured as the SWDIO serial wire debug data pin after reset, with IR_OUT alternate function. |
| 24 | PA14 (SWCLK) | bidirectional | 5 V tolerant (FT) I/O that is configured as the SWCLK serial wire debug clock pin after reset, with USART2_TX alternate function. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT) I/O with SPI1_NSS, I2S1_WS, USART2_RX and TIM2_CH1_ETR alternate functions. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O with SPI1_SCK, I2S1_CK, TIM2_CH2 and TSC_G5_IO1 alternate functions. |
| 27 | PB4 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1 and TSC_G5_IO2 alternate functions. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MOSI, I2S1_SD, I2C1_SMBA and TIM16_BKIN alternate functions. |
| 29 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf), with I2C1_SCL, USART1_TX and TSC_G5_IO3 alternate functions. |
| 30 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf), with I2C1_SDA, USART1_RX and TSC_G5_IO4 alternate functions. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin used for boot memory selection. |
| 32 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf), with I2C1_SCL, CEC, TIM16_CH1 and TSC_SYNC alternate functions. |
| 33 | VSS | power_in | ST DocID022265 Rev 5 Table 13 Pin definitions: the VSS rows and the VSSA row all give UFQFPN32 pin 0, so the exposed pad carries VSS and VSSA. Package note 3 (UFQFPN32 package information): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.' KiCad UFQFPN-32-1EP calls it pad 33. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD-VSS external main supply, absolute maximum | VDD-VSS | -0.3 | 4 | V | 46 | ||
| Analog supply voltage VDDA-VSS, absolute maximum | VDDA-VSS | -0.3 | 4 | V | 46 | ||
| External backup supply voltage VBAT-VSS, absolute maximum | VBAT-VSS | -0.3 | 4 | V | 46 | ||
| Input voltage on any other pin, absolute maximum | VIN | -0.3 | 4 | V | 46 | ||
| BOOT0 input voltage, absolute maximum | BOOT0 | 0 | 9 | V | 46 | ||
| Total current into sum of all VDD power lines (source) | IVDD | 120 | mA | 47 | |||
| Total current out of sum of all VSS ground lines (sink) | IVSS | -120 | mA | 47 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 25 | mA | 47 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | -25 | mA | 47 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 47 | ||
| Maximum junction temperature | TJ | 150 | °C | 47 | |||
| Internal AHB clock frequency | fHCLK | 0 | 48 | MHz | 48 | ||
| Internal APB clock frequency | fPCLK | 0 | 48 | MHz | 48 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 48 | ||
| Analog operating voltage (ADC and DAC used) | VDDA | 2.4 | 3.6 | V | ADC and DAC used | 48 | |
| Analog operating voltage (ADC and DAC not used) | VDDA | 3.6 | V | ADC and DAC not used; must have a potential equal to or higher than VDD | 48 | ||
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 48 | ||
| Input voltage on FT and FTf I/O | VIN | -0.3 | 5.5 | V | FT and FTf I/O | 48 | |
| Input voltage on BOOT0 | VIN | 0 | 5.5 | V | BOOT0 | 48 | |
| Power dissipation UFQFPN32 | PD | 526 | mW | TA = 85 °C for suffix 6 | 48 | ||
| Ambient temperature for the suffix 6 version, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation, suffix 6 | 48 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 48 | |
| Power on/power down reset threshold, falling edge | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 49 |
| Power on/power down reset threshold, rising edge | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 49 |
| PDR hysteresis | VPDRhyst | 40 | mV | 49 | |||
| Reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 49 | |
| Internal reference voltage | VREFINT | 1.16 | 1.2 | 1.24 | V | -40 °C < TA < +85 °C | 50 |
| Supply current in Run mode, code executing from Flash, all peripherals enabled | IDD | 22 | 22.8 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 | |
| Supply current in Run mode, code executing from Flash, all peripherals disabled | IDD | 11.8 | 12.7 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 | |
| Supply current in Sleep mode, code executing from Flash, all peripherals enabled | IDD | 14 | 15.3 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 | |
| Supply current in Sleep mode, code executing from Flash, all peripherals disabled | IDD | 2.8 | 3 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 | |
| Supply current in Run or Sleep mode from VDDA, HSE bypass PLL on 48 MHz | IDDA | 164 | 195 | µA | VDDA = 3.6 V; max at TA 85 °C | 53 | |
| Supply current in Run or Sleep mode from VDDA, HSI clock PLL off 8 MHz | IDDA | 83.5 | 91 | µA | VDDA = 3.6 V; max at TA 85 °C | 53 | |
| Supply current in Standby mode, LSI OFF and IWDG OFF | IDD | 1.3 | 2.5 | µA | VDD = VDDA = 3.6 V; max at TA 85 °C | 54 | |
| RTC domain supply current, LSE and RTC ON, lower driving capability | IDD_VBAT | 0.91 | 1.3 | µA | Xtal mode, LSEDRV[1:0] = '00', VBAT = 3.6 V; max at TA 85 °C | 55 | |
| User external clock source frequency | fHSE_ext | 8 | 32 | MHz | 62 | ||
| Oscillator frequency (HSE crystal/ceramic resonator) | fOSC_IN | 4 | 8 | 32 | MHz | 64 | |
| HSE startup time | tSU(HSE) | 2 | ms | VDD is stabilized | 64 | ||
| HSI oscillator frequency | fHSI | 8 | MHz | 68 | |||
| Accuracy of the HSI oscillator | ACCHSI | -2.8 | 3.8 | % | TA = -40 to 105 °C | 68 | |
| Low-speed internal (LSI) oscillator frequency | fLSI | 30 | 40 | 50 | kHz | 70 | |
| LSI oscillator startup time | tsu(LSI) | 85 | µs | 70 | |||
| PLL input clock | fPLL_IN | 1 | 8 | 24 | MHz | 70 | |
| PLL multiplier output clock | fPLL_OUT | 16 | 48 | MHz | 70 | ||
| PLL lock time | tLOCK | 200 | µs | 70 | |||
| 16-bit programming time | tprog | 40 | 53.5 | 60 | µs | TA = -40 to +105 °C | 71 |
| Page (1 KB) erase time | tERASE | 20 | 40 | ms | TA = -40 to +105 °C | 71 | |
| Endurance | NEND | 10 | kcycle | TA = -40 to +105 °C | 71 | ||
| Output low level voltage for an I/O pin, CMOS port | VOL | 0.4 | V | /IIO/ = 8 mA | 78 | ||
| Output high level voltage for an I/O pin, TTL port | VOH | 2.4 | V | TTL port, /IIO/ = 8 mA | 78 | ||
| Output low level voltage for an I/O pin, /IIO/ = 20 mA | VOL(3) | 1.3 | V | /IIO/ = 20 mA | 78 | ||
| Weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | k | VIN = VSS | 74 |
| Weak pull-down equivalent resistor | RPD | 25 | 40 | 55 | k | VIN = VDDIOx | 74 |
| I/O pin capacitance | CIO | 5 | pF | 74 | |||
| Input leakage current, TC, FT and FTf I/O, TTa in digital mode | Ilkg | 0.1 | µA | VSS ≤ VIN ≤ VDDIOx | 74 | ||
| Comparator analog supply voltage | VDDA | 2 | 3.6 | V | 87 | ||
| Comparator offset error | Voffset | 4 | 10 | mV | 87 | ||
| Comparator startup time | tSTART | 60 | µs | Startup time to reach propagation delay specification | 87 | ||
| Propagation delay for 200 mV step with 100 mV overdrive, high speed mode | tD | 50 | 100 | ns | VDDA ≥ 2.7 V | 87 | |
| COMP current consumption, high speed mode | IDD(COMP) | 75 | 100 | µA | High speed mode | 87 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32F051K8U6 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32f051k8u6-etched.step/stm32f051k8u6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f051k8u6.step/stm32f051k8u6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (128 pp, sha256
43ed2ceaaa26a289, retrieved 2026-11-18) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# STM32F051K8U6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32F051K8U6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital power supply pin for the I/Os and core, with VDD specified from 2.0 V to 3.6 V. |
| 2 | PF0-OSC_IN (PF0) | bidirectional | 5 V tolerant (FT) I/O that also serves as the OSC_IN input for the 4 to 32 MHz crystal oscillator. |
| 3 | PF1-OSC_OUT (PF1) | bidirectional | 5 V tolerant (FT) I/O that also serves as the OSC_OUT output for the 4 to 32 MHz crystal oscillator. |
| 4 | NRST | bidirectional | Active-low bidirectional device reset input and internal reset output with embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog power supply pin, with VDDA specified from VDD up to 3.6 V. |
| 6 | PA0 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN0 and WKUP1 functions. |
| 7 | PA1 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN1 and COMP1_INP functions. |
| 8 | PA2 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN2 and COMP2_INM6 functions. |
| 9 | PA3 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN3 and COMP2_INP functions. |
| 10 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN4 and DAC_OUT1 functions. |
| 11 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN5 and touch sensing group 2 function. |
| 12 | PA6 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN6 and TIM3_CH1 or TIM1_BKIN alternate functions. |
| 13 | PA7 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN7 and TIM3_CH2 or TIM1_CH1N alternate functions. |
| 14 | PB0 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN8 and TIM3_CH3 or TIM1_CH2N alternate functions. |
| 15 | PB1 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC (TTa) with ADC_IN9 and TIM3_CH4 or TIM14_CH1 alternate functions. |
| 16 | PB2 | bidirectional | 5 V tolerant (FT) I/O with TSC_G3_IO4 touch sensing function. |
| 17 | VDD | power_in | Digital power supply pin for the I/Os and core, with VDD specified from 2.0 V to 3.6 V. |
| 18 | PA8 | bidirectional | 5 V tolerant (FT) I/O with USART1_CK, TIM1_CH1 and MCO alternate functions. |
| 19 | PA9 | bidirectional | 5 V tolerant (FT) I/O with USART1_TX, TIM1_CH2 and TSC_G4_IO1 alternate functions. |
| 20 | PA10 | bidirectional | 5 V tolerant (FT) I/O with USART1_RX, TIM1_CH3 and TSC_G4_IO2 alternate functions. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O with USART1_CTS, TIM1_CH4 and COMP1_OUT alternate functions. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O with USART1_RTS, TIM1_ETR and COMP2_OUT alternate functions. |
| 23 | PA13 (SWDIO) | bidirectional | 5 V tolerant (FT) I/O that is configured as the SWDIO serial wire debug data pin after reset, with IR_OUT alternate function. |
| 24 | PA14 (SWCLK) | bidirectional | 5 V tolerant (FT) I/O that is configured as the SWCLK serial wire debug clock pin after reset, with USART2_TX alternate function. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT) I/O with SPI1_NSS, I2S1_WS, USART2_RX and TIM2_CH1_ETR alternate functions. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O with SPI1_SCK, I2S1_CK, TIM2_CH2 and TSC_G5_IO1 alternate functions. |
| 27 | PB4 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1 and TSC_G5_IO2 alternate functions. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MOSI, I2S1_SD, I2C1_SMBA and TIM16_BKIN alternate functions. |
| 29 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf), with I2C1_SCL, USART1_TX and TSC_G5_IO3 alternate functions. |
| 30 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf), with I2C1_SDA, USART1_RX and TSC_G5_IO4 alternate functions. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin used for boot memory selection. |
| 32 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf), with I2C1_SCL, CEC, TIM16_CH1 and TSC_SYNC alternate functions. |
| 33 | VSS | power_in | ST DocID022265 Rev 5 Table 13 Pin definitions: the VSS rows and the VSSA row all give UFQFPN32 pin 0, so the exposed pad carries VSS and VSSA. Package note 3 (UFQFPN32 package information): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.' KiCad UFQFPN-32-1EP calls it pad 33. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD-VSS external main supply, absolute maximum | VDD-VSS | -0.3 | | 4 | V | | 46 |
| Analog supply voltage VDDA-VSS, absolute maximum | VDDA-VSS | -0.3 | | 4 | V | | 46 |
| External backup supply voltage VBAT-VSS, absolute maximum | VBAT-VSS | -0.3 | | 4 | V | | 46 |
| Input voltage on any other pin, absolute maximum | VIN | -0.3 | | 4 | V | | 46 |
| BOOT0 input voltage, absolute maximum | BOOT0 | 0 | | 9 | V | | 46 |
| Total current into sum of all VDD power lines (source) | IVDD | | | 120 | mA | | 47 |
| Total current out of sum of all VSS ground lines (sink) | IVSS | | | -120 | mA | | 47 |
| Output current sunk by any I/O and control pin | IIO(PIN) | | | 25 | mA | | 47 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | -25 | mA | | 47 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 47 |
| Maximum junction temperature | TJ | | | 150 | °C | | 47 |
| Internal AHB clock frequency | fHCLK | 0 | | 48 | MHz | | 48 |
| Internal APB clock frequency | fPCLK | 0 | | 48 | MHz | | 48 |
| Standard operating voltage | VDD | 2 | | 3.6 | V | | 48 |
| Analog operating voltage (ADC and DAC used) | VDDA | 2.4 | | 3.6 | V | ADC and DAC used | 48 |
| Analog operating voltage (ADC and DAC not used) | VDDA | | | 3.6 | V | ADC and DAC not used; must have a potential equal to or higher than VDD | 48 |
| Backup operating voltage | VBAT | 1.65 | | 3.6 | V | | 48 |
| Input voltage on FT and FTf I/O | VIN | -0.3 | | 5.5 | V | FT and FTf I/O | 48 |
| Input voltage on BOOT0 | VIN | 0 | | 5.5 | V | BOOT0 | 48 |
| Power dissipation UFQFPN32 | PD | | | 526 | mW | TA = 85 °C for suffix 6 | 48 |
| Ambient temperature for the suffix 6 version, maximum power dissipation | TA | -40 | | 85 | °C | Maximum power dissipation, suffix 6 | 48 |
| Junction temperature range, suffix 6 version | TJ | -40 | | 105 | °C | Suffix 6 version | 48 |
| Power on/power down reset threshold, falling edge | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 49 |
| Power on/power down reset threshold, rising edge | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 49 |
| PDR hysteresis | VPDRhyst | | 40 | | mV | | 49 |
| Reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | | 49 |
| Internal reference voltage | VREFINT | 1.16 | 1.2 | 1.24 | V | -40 °C < TA < +85 °C | 50 |
| Supply current in Run mode, code executing from Flash, all peripherals enabled | IDD | | 22 | 22.8 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 |
| Supply current in Run mode, code executing from Flash, all peripherals disabled | IDD | | 11.8 | 12.7 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 |
| Supply current in Sleep mode, code executing from Flash, all peripherals enabled | IDD | | 14 | 15.3 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 |
| Supply current in Sleep mode, code executing from Flash, all peripherals disabled | IDD | | 2.8 | 3 | mA | HSE bypass, PLL on, 48 MHz, VDD = 3.6 V; max at TA 85 °C | 52 |
| Supply current in Run or Sleep mode from VDDA, HSE bypass PLL on 48 MHz | IDDA | | 164 | 195 | µA | VDDA = 3.6 V; max at TA 85 °C | 53 |
| Supply current in Run or Sleep mode from VDDA, HSI clock PLL off 8 MHz | IDDA | | 83.5 | 91 | µA | VDDA = 3.6 V; max at TA 85 °C | 53 |
| Supply current in Standby mode, LSI OFF and IWDG OFF | IDD | | 1.3 | 2.5 | µA | VDD = VDDA = 3.6 V; max at TA 85 °C | 54 |
| RTC domain supply current, LSE and RTC ON, lower driving capability | IDD_VBAT | | 0.91 | 1.3 | µA | Xtal mode, LSEDRV[1:0] = '00', VBAT = 3.6 V; max at TA 85 °C | 55 |
| User external clock source frequency | fHSE_ext | 8 | | 32 | MHz | | 62 |
| Oscillator frequency (HSE crystal/ceramic resonator) | fOSC_IN | 4 | 8 | 32 | MHz | | 64 |
| HSE startup time | tSU(HSE) | | 2 | | ms | VDD is stabilized | 64 |
| HSI oscillator frequency | fHSI | | 8 | | MHz | | 68 |
| Accuracy of the HSI oscillator | ACCHSI | -2.8 | | 3.8 | % | TA = -40 to 105 °C | 68 |
| Low-speed internal (LSI) oscillator frequency | fLSI | 30 | 40 | 50 | kHz | | 70 |
| LSI oscillator startup time | tsu(LSI) | | | 85 | µs | | 70 |
| PLL input clock | fPLL_IN | 1 | 8 | 24 | MHz | | 70 |
| PLL multiplier output clock | fPLL_OUT | 16 | | 48 | MHz | | 70 |
| PLL lock time | tLOCK | | | 200 | µs | | 70 |
| 16-bit programming time | tprog | 40 | 53.5 | 60 | µs | TA = -40 to +105 °C | 71 |
| Page (1 KB) erase time | tERASE | 20 | | 40 | ms | TA = -40 to +105 °C | 71 |
| Endurance | NEND | 10 | | | kcycle | TA = -40 to +105 °C | 71 |
| Output low level voltage for an I/O pin, CMOS port | VOL | | | 0.4 | V | /IIO/ = 8 mA | 78 |
| Output high level voltage for an I/O pin, TTL port | VOH | 2.4 | | | V | TTL port, /IIO/ = 8 mA | 78 |
| Output low level voltage for an I/O pin, /IIO/ = 20 mA | VOL(3) | | | 1.3 | V | /IIO/ = 20 mA | 78 |
| Weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | k | VIN = VSS | 74 |
| Weak pull-down equivalent resistor | RPD | 25 | 40 | 55 | k | VIN = VDDIOx | 74 |
| I/O pin capacitance | CIO | | | 5 | pF | | 74 |
| Input leakage current, TC, FT and FTf I/O, TTa in digital mode | Ilkg | | | 0.1 | µA | VSS ≤ VIN ≤ VDDIOx | 74 |
| Comparator analog supply voltage | VDDA | 2 | | 3.6 | V | | 87 |
| Comparator offset error | Voffset | | 4 | 10 | mV | | 87 |
| Comparator startup time | tSTART | | | 60 | µs | Startup time to reach propagation delay specification | 87 |
| Propagation delay for 200 mV step with 100 mV overdrive, high speed mode | tD | | 50 | 100 | ns | VDDA ≥ 2.7 V | 87 |
| COMP current consumption, high speed mode | IDD(COMP) | | 75 | 100 | µA | High speed mode | 87 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `STM32F051K8U6`
- Footprint: `Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm`
- 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm32f051k8u6-etched.step` / `stm32f051k8u6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f051k8u6.step` / `stm32f051k8u6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32f051k8u6.pdf) (128 pp, sha256 `43ed2ceaaa26a289`, retrieved 2026-11-18)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/stm32f051k8u6-datasheet.pdf)