← Commit history

Publish 0.1.1

Ray ·70cdd7f3c6 · ·parent 216331a
5 files changed +30−21
README.md+3−3
@@ -11,7 +11,7 @@ STM32F042K6T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descrip | 1 | VDD | power_in | Digital power supply for I/Os and internal regulator, VDD = 2.0 to 3.6 V; must be decoupled with ceramic capacitors close to the pin. | | 2 | PF0-OSC_IN | bidirectional | General-purpose I/O PF0, 5 V-tolerant Fm+ capable (FTf); alternate functions CRS_SYNC and I2C1_SDA; additional function OSC_IN, the 4-32 MHz external crystal/resonator oscillator input. | | 3 | PF1-OSC_OUT | bidirectional | General-purpose I/O PF1, 5 V-tolerant Fm+ capable (FTf); alternate function I2C1_SCL; additional function OSC_OUT, the 4-32 MHz external crystal/resonator oscillator output. |-| 4 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor; device reset input / internal reset output, active low. |+| 4 | NRST | input | Bidirectional reset pin with embedded weak pull-up resistor; device reset input / internal reset output, active low. | | 5 | VDDA | power_in | External analog power supply for ADC, reset blocks, RCs and PLL; from VDD to 3.6 V, minimum 2.4 V when the ADC is used; must always be ≥ VDD and established first. | | 6 | PA0 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa); alternate functions USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1; additional functions RTC_TAMP2, WKUP1, ADC_IN0. | | 7 | PA1 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa); alternate functions USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT; additional function ADC_IN1. |@@ -38,8 +38,8 @@ STM32F042K6T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descrip | 28 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2; additional function WKUP6. | | 29 | PB6 | bidirectional | 5 V-tolerant Fm+ capable I/O (FTf); alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3. | | 30 | PB7 | bidirectional | 5 V-tolerant Fm+ capable I/O (FTf); alternate functions I2C1_SDA, USART1_RX, TIM17_CH1N, TSC_G5_IO4. |-| 31 | PB8-BOOT0 | bidirectional | 5 V-tolerant Fm+ capable I/O (FTf); alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX; also acts as BOOT0 boot-memory selection input sampled at reset. |-| 32 | VSS | power_in | Ground pin; on packages other than the 48-pin ones there is no separate VSSA pin, so the VSSA analog ground pad of the silicon die is internally bonded to this VSS pin. |+| 31 | PB8 | bidirectional | 5 V-tolerant Fm+ capable I/O (FTf); alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC, CAN_RX; also acts as BOOT0 boot-memory selection input sampled at reset. |+| 32 | VSSA | power_in |  |  ## Key specifications 
package.json+2−2
@@ -1,6 +1,6 @@ {   "slug": "stm32f042k6t6",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -278,4 +278,4 @@       "footprint": "viewers/footprint.html"     }   }-}\ No newline at end of file+}
page.json+5−5
@@ -4,7 +4,7 @@   "slug": "stm32f042k6t6",   "title": "STM32F042K6T6",   "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -305,8 +305,8 @@     "viewers/symbol.html",     "viewers/footprint.html"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-25T08:40:22.478Z"+  "visibility": "public",+  "updated_at": "2026-09-25T08:40:22.478Z",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
stm32f042k6t6.kicad_sym+3−3
@@ -20,7 +20,7 @@       (name "PF1-OSC_OUT" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+    (pin input line (at -17.78 10.16 0) (length 5.08)       (name "NRST" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )@@ -73,11 +73,11 @@       (number "16" (effects (font (size 1.27 1.27))))     )     (pin power_in line (at 17.78 17.78 180) (length 5.08)-      (name "VSS" (effects (font (size 1.27 1.27))))+      (name "VSSA" (effects (font (size 1.27 1.27))))       (number "32" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 15.24 180) (length 5.08)-      (name "PB8-BOOT0" (effects (font (size 1.27 1.27))))+      (name "PB8" (effects (font (size 1.27 1.27))))       (number "31" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 12.70 180) (length 5.08)
stm32f042k6t6.lbr+17−8
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST&apos;s open pin data</description> <packages> <package name="LQFP-32_7x7mm_P0.8mm">   <description>LQFP-32, 7 x 7 mm, 0.8 mm pitch</description>@@ -112,6 +112,7 @@ </packages> <symbols> <symbol name="STM32F042K6T6">+  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST&apos;s open pin data</description>   <wire x1="-12.7" y1="20.32" x2="12.7" y2="20.32" width="0.254" layer="94"/>   <wire x1="12.7" y1="20.32" x2="12.7" y2="-22.86" width="0.254" layer="94"/>   <wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>@@ -121,7 +122,7 @@   <pin name="VDD" x="-17.78" y="17.78" length="middle" direction="pwr"/>   <pin name="PF0-OSC_IN" x="-17.78" y="15.24" length="middle" direction="io"/>   <pin name="PF1-OSC_OUT" x="-17.78" y="12.7" length="middle" direction="io"/>-  <pin name="NRST" x="-17.78" y="10.16" length="middle" direction="io"/>+  <pin name="NRST" x="-17.78" y="10.16" length="middle" direction="in"/>   <pin name="VDDA" x="-17.78" y="7.62" length="middle" direction="pwr"/>   <pin name="PA0" x="-17.78" y="5.08" length="middle" direction="io"/>   <pin name="PA1" x="-17.78" y="2.54" length="middle" direction="io"/>@@ -134,8 +135,8 @@   <pin name="PB0" x="-17.78" y="-15.24" length="middle" direction="io"/>   <pin name="PB1" x="-17.78" y="-17.78" length="middle" direction="io"/>   <pin name="VSS" x="-17.78" y="-20.32" length="middle" direction="pwr"/>-  <pin name="VSS@2" x="17.78" y="17.78" length="middle" direction="pwr" rot="R180"/>-  <pin name="PB8-BOOT0" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>+  <pin name="VSSA" x="17.78" y="17.78" length="middle" direction="pwr" rot="R180"/>+  <pin name="PB8" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>   <pin name="PB7" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>   <pin name="PB6" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>   <pin name="PB5" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>@@ -154,7 +155,7 @@ </symbols> <devicesets> <deviceset name="STM32F042K6T6" prefix="U">-  <description></description>+  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST&apos;s open pin data</description>   <gates>     <gate name="G$1" symbol="STM32F042K6T6" x="0" y="0"/>   </gates>@@ -177,8 +178,8 @@         <connect gate="G$1" pin="PB0" pad="14"/>         <connect gate="G$1" pin="PB1" pad="15"/>         <connect gate="G$1" pin="VSS" pad="16"/>-        <connect gate="G$1" pin="VSS@2" pad="32"/>-        <connect gate="G$1" pin="PB8-BOOT0" pad="31"/>+        <connect gate="G$1" pin="VSSA" pad="32"/>+        <connect gate="G$1" pin="PB8" pad="31"/>         <connect gate="G$1" pin="PB7" pad="30"/>         <connect gate="G$1" pin="PB6" pad="29"/>         <connect gate="G$1" pin="PB5" pad="28"/>@@ -194,7 +195,15 @@         <connect gate="G$1" pin="PA8" pad="18"/>         <connect gate="G$1" pin="VDDIO2" pad="17"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="STM32F042K6T6" constant="no"/>+          <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586176041157611520" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/stm32f042k6t6" constant="no"/>+          <attribute name="LCSC_PN" value="C69216" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>