← Commit history

Initial commit: component/stm32f042c6t6

Ray ·5b5657f77d ·
2 files changed +465
README.mdadded+84
@@ -0,0 +1,84 @@+# STM32F042C6T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32F042C6T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply for RTC and backup registers, operating range 1.65 to 3.6 V. |+| 2 | PC13 | bidirectional | 3.3 V tolerant GPIO port C pin 13 supporting RTC tamper detection 1, timestamp trigger, RTC output, and wakeup trigger 2. |+| 3 | PC14 | bidirectional | 3.3 V tolerant GPIO port C pin 14 with alternate function 32.768 kHz oscillator input. |+| 4 | PC15 | bidirectional | 3.3 V tolerant GPIO port C pin 15 with alternate function 32.768 kHz oscillator output. |+| 5 | PF0 | bidirectional | 5 V-tolerant FM+ capable I/O supporting 8-32 MHz oscillator input and I2C1 serial data alternate functions. |+| 6 | PF1 | bidirectional | 5 V-tolerant FM+ capable I/O supporting 8-32 MHz oscillator output and I2C1 serial clock alternate functions. |+| 7 | NRST | bidirectional | Active-low device reset input with embedded pull-up resistor and RC filter for debouncing. |+| 8 | VSSA | power_in | Analog ground reference pin for ADC converter and internal analog circuits. |+| 9 | VDDA | power_in | Analog power supply pin, operating range 2.4 to 3.6 V when ADC is used, must be >= VDD. |+| 10 | PA0 | bidirectional | 3.3 V ADC-capable GPIO port A pin 0 supporting USART2_CTS, TIM2 channel 1, TSC group 1, RTC tamper 2, and wakeup 1. |+| 11 | PA1 | bidirectional | 3.3 V ADC-capable GPIO port A pin 1 supporting USART2_RTS, TIM2 channel 2, and TSC group 1 I/O2. |+| 12 | PA2 | bidirectional | 3.3 V ADC-capable GPIO port A pin 2 supporting USART2_TX, TIM2 channel 3, TSC group 1 I/O3, and wakeup trigger 4. |+| 13 | PA3 | bidirectional | 3.3 V ADC-capable GPIO port A pin 3 supporting USART2_RX, TIM2 channel 4, and TSC group 1 I/O4. |+| 14 | PA4 | bidirectional | 3.3 V ADC-capable GPIO port A pin 4 supporting SPI1 NSS, I2S1 word select, TIM14, TSC group 2, and USART2_CK. |+| 15 | PA5 | bidirectional | 3.3 V ADC-capable GPIO port A pin 5 supporting SPI1 SCK, I2S1 clock, CEC data, TIM2 channel 1, and TSC group 2 I/O2. |+| 16 | PA6 | bidirectional | 3.3 V ADC-capable GPIO port A pin 6 supporting SPI1 MISO, I2S1 master clock, TIM3 channel 1, TIM1 brake, TIM16 channel 1, and TSC group 2. |+| 17 | PA7 | bidirectional | 3.3 V ADC-capable GPIO port A pin 7 supporting SPI1 MOSI, I2S1 serial data, TIM3 channel 2, TIM1 channel 1N, TIM14, TIM17, and TSC group 2 I/O4. |+| 18 | PB0 | bidirectional | 3.3 V ADC-capable GPIO port B pin 0 supporting TIM3 channel 3, TIM1 channel 2N, and TSC group 3 I/O2. |+| 19 | PB1 | bidirectional | 3.3 V ADC-capable GPIO port B pin 1 supporting TIM3 channel 4, TIM1 channel 3N, TIM14, and TSC group 3 I/O3. |+| 20 | PB2 | bidirectional | 5 V-tolerant GPIO port B pin 2 supporting TSC group 3 I/O4. |+| 21 | PB10 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 10 supporting SPI2 SCK, CEC data, TSC sync, TIM2 channel 3, and I2C1 clock. |+| 22 | PB11 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 11 supporting TIM2 channel 4 and I2C1 serial data. |+| 23 | VSS | power_in | Ground reference pin for digital circuits and core logic. |+| 24 | VDD | power_in | Digital power supply pin for core logic and I/O, operating range 2.0 to 3.6 V. |+| 25 | PB12 | bidirectional | 5 V-tolerant GPIO port B pin 12 supporting TIM1 brake input and SPI2 NSS. |+| 26 | PB13 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 13 supporting SPI2 SCK, TIM1 channel 1N, and I2C1 clock. |+| 27 | PB14 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 14 supporting SPI2 MISO, TIM1 channel 2N, and I2C1 serial data. |+| 28 | PB15 | bidirectional | 5 V-tolerant GPIO port B pin 15 supporting SPI2 MOSI, TIM1 channel 3N, RTC reference input, and wakeup trigger 7. |+| 29 | PA8 | bidirectional | 5 V-tolerant GPIO port A pin 8 supplied by VDDIO2, supporting USART1 clock, TIM1 channel 1, MCO output, and CRS sync. |+| 30 | PA9 | bidirectional | 5 V-tolerant FM+ capable I/O port A pin 9 supplied by VDDIO2, supporting USART1 TX, TIM1 channel 2, TSC group 4, and I2C1 clock. |+| 31 | PA10 | bidirectional | 5 V-tolerant FM+ capable I/O port A pin 10 supplied by VDDIO2, supporting USART1 RX, TIM1 channel 3, TIM17 brake, TSC group 4, and I2C1 data. |+| 32 | PA11 | bidirectional | 5 V-tolerant FM+ capable I/O port A pin 11 supplied by VDDIO2, supporting CAN RX, USART1 CTS, TIM1 channel 4, I2C1 clock, and USB DM. |+| 33 | PA12 | bidirectional | 5 V-tolerant FM+ capable I/O port A pin 12 supplied by VDDIO2, supporting CAN TX, USART1 RTS, TIM1 external trigger, I2C1 data, and USB DP. |+| 34 | PA13 | bidirectional | 5 V-tolerant GPIO port A pin 13 supplied by VDDIO2, SWDIO serial wire debug interface after reset, supports IR output. |+| 35 | VSS | power_in | Ground reference pin for digital circuits and core logic. |+| 36 | VDDIO2 | power_in | Digital I/O power supply for pins PA8-PA15, operating range 1.65 to 3.6 V, monitored with VREFINT threshold. |+| 37 | PA14 | bidirectional | 5 V-tolerant GPIO port A pin 14 supplied by VDDIO2, SWCLK serial wire debug clock after reset, supports USART2 TX. |+| 38 | PA15 | bidirectional | 5 V-tolerant GPIO port A pin 15 supplied by VDDIO2, supporting SPI1 NSS, I2S1 word select, USART2 RX, TIM2 channel 1, and USB disable. |+| 39 | PB3 | bidirectional | 5 V-tolerant GPIO port B pin 3 supporting SPI1 SCK, I2S1 clock, TIM2 channel 2, and TSC group 5 I/O1. |+| 40 | PB4 | bidirectional | 5 V-tolerant GPIO port B pin 4 supporting SPI1 MISO, I2S1 master clock, TIM17 brake, TIM3 channel 1, and TSC group 5 I/O2. |+| 41 | PB5 | bidirectional | 5 V-tolerant GPIO port B pin 5 supporting SPI1 MOSI, I2S1 serial data, I2C1 SMBA, TIM16 brake, TIM3 channel 2, and wakeup trigger 6. |+| 42 | PB6 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 6 supporting I2C1 clock, USART1 TX, TIM16 channel 1N, and TSC group 5 I/O3. |+| 43 | PB7 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 7 supporting I2C1 serial data, USART1 RX, TIM17 channel 1N, and TSC group 5 I/O4. |+| 44 | PF11 | bidirectional | 5 V-tolerant GPIO port F pin 11 used for Boot0 memory selection between flash and system bootloader. |+| 45 | PB8 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 8 supporting I2C1 clock, CEC data, TIM16 channel 1, TSC sync, and CAN RX. |+| 46 | PB9 | bidirectional | 5 V-tolerant FM+ capable I/O port B pin 9 supporting SPI2 NSS, I2C1 data, IR output, TIM17 channel 1, and CAN TX. |+| 47 | VSS | power_in | Ground reference pin for digital circuits and core logic. |+| 48 | VDD | power_in | Digital power supply pin for core logic and I/O, operating range 2.0 to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32F042C6T6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32f042c6t6-etched.step` / `stm32f042c6t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f042c6t6.step` / `stm32f042c6t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182692073312256) (117 pp, sha256 `7af7ec8f5a596b23`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f042c6t6-datasheet.pdf)
page.jsonadded+381
@@ -0,0 +1,381 @@+{+  "slug": "stm32f042c6t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f042c6t6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f042c6t6.kicad_sym",+    "stm32f042c6t6.kicad_mod",+    "stm32f042c6t6.glb",+    "stm32f042c6t6.step",+    "stm32f042c6t6.lbr",+    "docs/hero.png",+    "docs/stm32f042c6t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F042C6T6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182692073312256",+    "parts": {+      "symbol": "stm32f042c6t6.kicad_sym",+      "footprint": "stm32f042c6t6.kicad_mod",+      "model_3d": "stm32f042c6t6-etched.glb",+      "model_3d_plain": "stm32f042c6t6.glb",+      "model_3d_step": "stm32f042c6t6-etched.step",+      "model_3d_step_plain": "stm32f042c6t6.step",+      "lbr": "stm32f042c6t6.lbr"+    },+    "distributor_links": {+      "lcsc": "C88447"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply for RTC and backup registers, operating range 1.65 to 3.6 V."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "3.3 V tolerant GPIO port C pin 13 supporting RTC tamper detection 1, timestamp trigger, RTC output, and wakeup trigger 2."+      },+      {+        "number": "3",+        "name": "PC14",+        "type": "bidirectional",+        "description": "3.3 V tolerant GPIO port C pin 14 with alternate function 32.768 kHz oscillator input."+      },+      {+        "number": "4",+        "name": "PC15",+        "type": "bidirectional",+        "description": "3.3 V tolerant GPIO port C pin 15 with alternate function 32.768 kHz oscillator output."+      },+      {+        "number": "5",+        "name": "PF0",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O supporting 8-32 MHz oscillator input and I2C1 serial data alternate functions."+      },+      {+        "number": "6",+        "name": "PF1",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O supporting 8-32 MHz oscillator output and I2C1 serial clock alternate functions."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low device reset input with embedded pull-up resistor and RC filter for debouncing."+      },+      {+        "number": "8",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference pin for ADC converter and internal analog circuits."+      },+      {+        "number": "9",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply pin, operating range 2.4 to 3.6 V when ADC is used, must be >= VDD."+      },+      {+        "number": "10",+        "name": "PA0",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 0 supporting USART2_CTS, TIM2 channel 1, TSC group 1, RTC tamper 2, and wakeup 1."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 1 supporting USART2_RTS, TIM2 channel 2, and TSC group 1 I/O2."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 2 supporting USART2_TX, TIM2 channel 3, TSC group 1 I/O3, and wakeup trigger 4."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 3 supporting USART2_RX, TIM2 channel 4, and TSC group 1 I/O4."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 4 supporting SPI1 NSS, I2S1 word select, TIM14, TSC group 2, and USART2_CK."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 5 supporting SPI1 SCK, I2S1 clock, CEC data, TIM2 channel 1, and TSC group 2 I/O2."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 6 supporting SPI1 MISO, I2S1 master clock, TIM3 channel 1, TIM1 brake, TIM16 channel 1, and TSC group 2."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port A pin 7 supporting SPI1 MOSI, I2S1 serial data, TIM3 channel 2, TIM1 channel 1N, TIM14, TIM17, and TSC group 2 I/O4."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port B pin 0 supporting TIM3 channel 3, TIM1 channel 2N, and TSC group 3 I/O2."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "3.3 V ADC-capable GPIO port B pin 1 supporting TIM3 channel 4, TIM1 channel 3N, TIM14, and TSC group 3 I/O3."+      },+      {+        "number": "20",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port B pin 2 supporting TSC group 3 I/O4."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 10 supporting SPI2 SCK, CEC data, TSC sync, TIM2 channel 3, and I2C1 clock."+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 11 supporting TIM2 channel 4 and I2C1 serial data."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin for digital circuits and core logic."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin for core logic and I/O, operating range 2.0 to 3.6 V."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port B pin 12 supporting TIM1 brake input and SPI2 NSS."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 13 supporting SPI2 SCK, TIM1 channel 1N, and I2C1 clock."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 14 supporting SPI2 MISO, TIM1 channel 2N, and I2C1 serial data."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port B pin 15 supporting SPI2 MOSI, TIM1 channel 3N, RTC reference input, and wakeup trigger 7."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port A pin 8 supplied by VDDIO2, supporting USART1 clock, TIM1 channel 1, MCO output, and CRS sync."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port A pin 9 supplied by VDDIO2, supporting USART1 TX, TIM1 channel 2, TSC group 4, and I2C1 clock."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port A pin 10 supplied by VDDIO2, supporting USART1 RX, TIM1 channel 3, TIM17 brake, TSC group 4, and I2C1 data."+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port A pin 11 supplied by VDDIO2, supporting CAN RX, USART1 CTS, TIM1 channel 4, I2C1 clock, and USB DM."+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port A pin 12 supplied by VDDIO2, supporting CAN TX, USART1 RTS, TIM1 external trigger, I2C1 data, and USB DP."+      },+      {+        "number": "34",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port A pin 13 supplied by VDDIO2, SWDIO serial wire debug interface after reset, supports IR output."+      },+      {+        "number": "35",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin for digital circuits and core logic."+      },+      {+        "number": "36",+        "name": "VDDIO2",+        "type": "power_in",+        "description": "Digital I/O power supply for pins PA8-PA15, operating range 1.65 to 3.6 V, monitored with VREFINT threshold."+      },+      {+        "number": "37",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port A pin 14 supplied by VDDIO2, SWCLK serial wire debug clock after reset, supports USART2 TX."+      },+      {+        "number": "38",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port A pin 15 supplied by VDDIO2, supporting SPI1 NSS, I2S1 word select, USART2 RX, TIM2 channel 1, and USB disable."+      },+      {+        "number": "39",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port B pin 3 supporting SPI1 SCK, I2S1 clock, TIM2 channel 2, and TSC group 5 I/O1."+      },+      {+        "number": "40",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port B pin 4 supporting SPI1 MISO, I2S1 master clock, TIM17 brake, TIM3 channel 1, and TSC group 5 I/O2."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port B pin 5 supporting SPI1 MOSI, I2S1 serial data, I2C1 SMBA, TIM16 brake, TIM3 channel 2, and wakeup trigger 6."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 6 supporting I2C1 clock, USART1 TX, TIM16 channel 1N, and TSC group 5 I/O3."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 7 supporting I2C1 serial data, USART1 RX, TIM17 channel 1N, and TSC group 5 I/O4."+      },+      {+        "number": "44",+        "name": "PF11",+        "type": "bidirectional",+        "description": "5 V-tolerant GPIO port F pin 11 used for Boot0 memory selection between flash and system bootloader."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 8 supporting I2C1 clock, CEC data, TIM16 channel 1, TSC sync, and CAN RX."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5 V-tolerant FM+ capable I/O port B pin 9 supporting SPI2 NSS, I2C1 data, IR output, TIM17 channel 1, and CAN TX."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference pin for digital circuits and core logic."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin for core logic and I/O, operating range 2.0 to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 117,+        "cost_usd": 1.2592,+        "at": "2026-09-24T07:55:27"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182692073312256",+        "pages": 117,+        "sha256": "7af7ec8f5a596b23",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file