component
STM32F038C6T7
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F038C6T7
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
STM32F038C6T7 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply for RTC and backup registers |
| 2 | PC13 | bidirectional | GPIO PC13, 3.3V-tolerant, with RTC domain functions (tamper, timestamp, RTC output, wakeup) |
| 3 | PC14 | bidirectional | GPIO PC14, 3.3V-tolerant, configured as OSC32_IN at reset |
| 4 | PC15 | bidirectional | GPIO PC15, 3.3V-tolerant, configured as OSC32_OUT at reset |
| 5 | PF0 | bidirectional | GPIO PF0, 5V-tolerant, configured as OSC_IN at reset |
| 6 | PF1 | bidirectional | GPIO PF1, 5V-tolerant, configured as OSC_OUT at reset |
| 7 | NRST | bidirectional | Device reset input with embedded weak pull-up resistor, active low |
| 8 | VSSA | power_in | Analog ground |
| 9 | VDDA | power_in | Analog power supply, 2.4 to 3.6V, independent supply from VDD |
| 10 | PA0 | bidirectional | GPIO PA0, 3.3V-tolerant, ADC channel 0, supports TIM2/USART1 alternate functions |
| 11 | PA1 | bidirectional | GPIO PA1, 3.3V-tolerant, ADC channel 1, supports TIM2/USART1 alternate functions |
| 12 | PA2 | bidirectional | GPIO PA2, 3.3V-tolerant, ADC channel 2, supports TIM2/USART1 alternate functions |
| 13 | PA3 | bidirectional | GPIO PA3, 3.3V-tolerant, ADC channel 3, supports TIM2/USART1 alternate functions |
| 14 | PA4 | bidirectional | GPIO PA4, 3.3V-tolerant, ADC channel 4, supports SPI1/I2S1/TIM14/USART1 alternate functions |
| 15 | PA5 | bidirectional | GPIO PA5, 3.3V-tolerant, ADC channel 5, supports SPI1/I2S1/TIM2 alternate functions |
| 16 | PA6 | bidirectional | GPIO PA6, 3.3V-tolerant, ADC channel 6, supports SPI1/I2S1/TIM3/TIM1/TIM16 alternate functions |
| 17 | PA7 | bidirectional | GPIO PA7, 3.3V-tolerant, ADC channel 7, supports SPI1/I2S1/TIM3/TIM14/TIM1/TIM17 alternate functions |
| 18 | PB0 | bidirectional | GPIO PB0, 3.3V-tolerant, ADC channel 8, supports TIM3/TIM1 alternate functions |
| 19 | PB1 | bidirectional | GPIO PB1, 3.3V-tolerant, ADC channel 9, supports TIM3/TIM14/TIM1 alternate functions |
| 20 | NPOR | input | Power-on reset input with embedded weak pull-up resistor powered from VDDA |
| 21 | PB10 | bidirectional | GPIO PB10, 5V-tolerant FM+ capable, supports I2C1/TIM2 alternate functions |
| 22 | PB11 | bidirectional | GPIO PB11, 5V-tolerant FM+ capable, supports I2C1/TIM2 alternate functions |
| 23 | VSS | power_in | Digital ground |
| 24 | VDD | power_in | Digital power supply, 1.8V ±8% |
| 25 | PB12 | bidirectional | GPIO PB12, 5V-tolerant, supports SPI1/TIM1 alternate functions |
| 26 | PB13 | bidirectional | GPIO PB13, 5V-tolerant, supports SPI1/TIM1 alternate functions |
| 27 | PB14 | bidirectional | GPIO PB14, 5V-tolerant, supports SPI1/TIM1 alternate functions |
| 28 | PB15 | bidirectional | GPIO PB15, 5V-tolerant, supports SPI1/TIM1/RTC_REFIN alternate functions |
| 29 | PA8 | bidirectional | GPIO PA8, 5V-tolerant, supports USART1/TIM1/MCO alternate functions |
| 30 | PA9 | bidirectional | GPIO PA9, 5V-tolerant FM+ capable, supports USART1/TIM1/I2C1 alternate functions |
| 31 | PA10 | bidirectional | GPIO PA10, 5V-tolerant FM+ capable, supports USART1/TIM1/TIM17/I2C1 alternate functions |
| 32 | PA11 | bidirectional | GPIO PA11, 5V-tolerant, supports USART1/TIM1 alternate functions |
| 33 | PA12 | bidirectional | GPIO PA12, 5V-tolerant, supports USART1/TIM1 alternate functions |
| 34 | PA13 | bidirectional | GPIO PA13, 5V-tolerant, configured as SWDIO at reset with internal pull-up, supports IR_OUT alternate function |
| 35 | PF6 | bidirectional | GPIO PF6, 5V-tolerant FM+ capable, supports I2C1 alternate functions |
| 36 | PF7 | bidirectional | GPIO PF7, 5V-tolerant FM+ capable, supports I2C1 alternate functions |
| 37 | PA14 | bidirectional | GPIO PA14, 5V-tolerant, configured as SWCLK at reset with internal pull-down, supports USART1 alternate function |
| 38 | PA15 | bidirectional | GPIO PA15, 5V-tolerant, supports SPI1/I2S1/TIM2/USART1 alternate functions |
| 39 | PB3 | bidirectional | GPIO PB3, 5V-tolerant, supports SPI1/I2S1/TIM2 alternate functions |
| 40 | PB4 | bidirectional | GPIO PB4, 5V-tolerant, supports SPI1/I2S1/TIM3 alternate functions |
| 41 | PB5 | bidirectional | GPIO PB5, 5V-tolerant, supports SPI1/I2S1/I2C1/TIM16/TIM3 alternate functions |
| 42 | PB6 | bidirectional | GPIO PB6, 5V-tolerant FM+ capable, supports I2C1/USART1/TIM16 alternate functions |
| 43 | PB7 | bidirectional | GPIO PB7, 5V-tolerant FM+ capable, supports I2C1/USART1/TIM17 alternate functions |
| 44 | BOOT0 | input | Boot memory selection pin, active high, selects Flash memory when low or system memory when high |
| 45 | PB8 | bidirectional | GPIO PB8, 5V-tolerant FM+ capable, supports I2C1/TIM16 alternate functions |
| 46 | PB9 | bidirectional | GPIO PB9, 5V-tolerant FM+ capable, supports I2C1/TIM17/IR_OUT alternate functions |
| 47 | VSS | power_in | Digital ground |
| 48 | VDD | power_in | Digital power supply, 1.8V ±8% |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
STM32F038C6T7 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32f038c6t7-etched.step/stm32f038c6t7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f038c6t7.step/stm32f038c6t7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (102 pp, sha256
e98b7088fad6d510, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).