← Commit history
README.md+15−12
@@ -8,10 +8,10 @@ STM32F031K6U6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descr  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | BOOT0 | input | Dedicated input pin for boot memory selection; 0 selects flash memory, 1 selects system memory. |+| 1 | VDD | power_in | Digital power supply pin requiring 2.0 to 3.6 V for device operation. | | 2 | PF0-OSC_IN | bidirectional | 5V-tolerant I/O pin used for high-speed external oscillator input clock source. | | 3 | PF1-OSC_OUT | bidirectional | 5V-tolerant I/O pin used for high-speed external oscillator output clock source. |-| 4 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor for device reset control (active low). |+| 4 | NRST | input | Bidirectional reset pin with embedded weak pull-up resistor for device reset control (active low). | | 5 | VDDA | power_in | Analog power supply pin requiring 2.4 to 3.6 V when ADC is used, or VDD to 3.6 V when ADC is disabled. | | 6 | PA0 | bidirectional | 3.3V-tolerant analog I/O pin supporting TIM2_CH1_ETR and USART1_CTS alternate functions with ADC_IN0 and RTC wakeup capability. | | 7 | PA1 | bidirectional | 3.3V-tolerant analog I/O pin supporting USART1_RTS, TIM2_CH2, and EVENTOUT alternate functions with ADC_IN1 capability. |@@ -23,20 +23,23 @@ STM32F031K6U6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descr | 13 | PA7 | bidirectional | 3.3V-tolerant analog I/O pin supporting SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, and EVENTOUT alternate functions with ADC_IN7 capability. | | 14 | PB0 | bidirectional | 3.3V-tolerant analog I/O pin supporting TIM3_CH3, TIM1_CH2N, and EVENTOUT alternate functions with ADC_IN8 capability. | | 15 | PB1 | bidirectional | 3.3V-tolerant analog I/O pin supporting TIM3_CH4, TIM14_CH1, and TIM1_CH3N alternate functions with ADC_IN9 capability. |-| 16 | VSS | power_in | Digital ground return pin required for normal circuit operation. |+| 16 | PB2 | bidirectional |  | | 17 | VDD | power_in | Digital power supply pin requiring 2.0 to 3.6 V for device operation. | | 18 | PA8 | bidirectional | 5V-tolerant I/O pin supporting USART1_CK, TIM1_CH1, EVENTOUT, and MCO alternate functions. | | 19 | PA9 | bidirectional | Fast Mode Plus I/O pin supporting USART1_TX, TIM1_CH2, and I2C1_SCL alternate functions. | | 20 | PA10 | bidirectional | Fast Mode Plus I/O pin supporting USART1_RX, TIM1_CH3, TIM17_BKIN, and I2C1_SDA alternate functions. |-| 21 | PA13(SWDIO) | bidirectional | 5V-tolerant I/O pin configured as SWDIO serial wire debug after reset with IR_OUT alternate function and internal pull-up. |-| 22 | PA14(SWCLK) | bidirectional | 5V-tolerant I/O pin configured as SWCLK serial wire debug after reset supporting USART1_TX alternate function with internal pull-down. |-| 23 | PA15 | bidirectional | 5V-tolerant I/O pin supporting SPI1_NSS, I2S1_WS, TIM2_CH_ETR, EVENTOUT, and USART1_RX alternate functions. |-| 24 | PB3 | bidirectional | 5V-tolerant I/O pin supporting SPI1_SCK, I2S1_CK, TIM2_CH2, and EVENTOUT alternate functions. |-| 25 | PB4 | bidirectional | 5V-tolerant I/O pin supporting SPI1_MISO, I2S1_MCK, TIM3_CH1, and EVENTOUT alternate functions. |-| 26 | PB5 | bidirectional | 5V-tolerant I/O pin supporting SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, and TIM3_CH2 alternate functions. |-| 27 | PB6 | bidirectional | Fast Mode Plus I/O pin supporting I2C1_SCL, USART1_TX, and TIM16_CH1N alternate functions. |-| 28 | PB7 | bidirectional | Fast Mode Plus I/O pin supporting I2C1_SDA, USART1_RX, and TIM17_CH1N alternate functions. |-| 0 | VSSA | power_in | Analog ground pad connected to exposed die pad on package underside; must be soldered to PCB ground. |+| 21 | PA11 | bidirectional |  |+| 22 | PA12 | bidirectional |  |+| 23 | PA13 | bidirectional |  |+| 24 | PA14 | bidirectional |  |+| 25 | PA15 | bidirectional | 5V-tolerant I/O pin supporting SPI1_NSS, I2S1_WS, TIM2_CH_ETR, EVENTOUT, and USART1_RX alternate functions. |+| 26 | PB3 | bidirectional | 5V-tolerant I/O pin supporting SPI1_SCK, I2S1_CK, TIM2_CH2, and EVENTOUT alternate functions. |+| 27 | PB4 | bidirectional | 5V-tolerant I/O pin supporting SPI1_MISO, I2S1_MCK, TIM3_CH1, and EVENTOUT alternate functions. |+| 28 | PB5 | bidirectional | 5V-tolerant I/O pin supporting SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, and TIM3_CH2 alternate functions. |+| 29 | PB6 | bidirectional | Fast Mode Plus I/O pin supporting I2C1_SCL, USART1_TX, and TIM16_CH1N alternate functions. |+| 30 | PB7 | bidirectional | Fast Mode Plus I/O pin supporting I2C1_SDA, USART1_RX, and TIM17_CH1N alternate functions. |+| 31 | BOOT0 | input | Dedicated input pin for boot memory selection; 0 selects flash memory, 1 selects system memory. |+| 32 | PB8 | bidirectional |  |  ## Key specifications 
package.json+5−3
@@ -1,6 +1,6 @@ {   "slug": "stm32f031k6u6",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,9 @@     "docs/hero.png",     "docs/stm32f031k6u6-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "stm32f031k6u6-hero.glb",+    "stm32f031k6u6-hero.overlay.json"   ],   "component": {     "mpn": "STM32F031K6U6",@@ -39,7 +41,7 @@     "parts": {       "symbol": "stm32f031k6u6.kicad_sym",       "footprint": "stm32f031k6u6.kicad_mod",-      "model_3d": "stm32f031k6u6-etched.glb",+      "model_3d": "stm32f031k6u6-hero.glb",       "model_3d_plain": "stm32f031k6u6.glb",       "model_3d_step": "stm32f031k6u6-etched.step",       "model_3d_step_plain": "stm32f031k6u6.step",
page.json+17−15
@@ -4,7 +4,7 @@   "slug": "stm32f031k6u6",   "title": "STM32F031K6U6",   "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -24,7 +24,7 @@     "parts": {       "symbol": "stm32f031k6u6.kicad_sym",       "footprint": "stm32f031k6u6.kicad_mod",-      "model_3d": "stm32f031k6u6-etched.glb",+      "model_3d": "stm32f031k6u6-hero.glb",       "model_3d_plain": "stm32f031k6u6.glb",       "model_3d_step": "stm32f031k6u6-etched.step",       "model_3d_step_plain": "stm32f031k6u6.step",@@ -252,12 +252,12 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          5.0,-          5.0,+          5,+          5,           1.1         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "90af021df1253eae35bee4f4a4f9ba63bcf4a308f6e9f12d58f6e00181c23140",         "checked": "2026-10-07",@@ -271,12 +271,12 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          5.0,-          5.0,+          5,+          5,           1.1         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "a59eab016dc8b85e31a8f34211e4b9ec0afdb68dedf544eb3ca1431243955fd3",         "checked": "2026-10-07",@@ -324,9 +324,11 @@     "docs/hero.png",     "docs/stm32f031k6u6-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "stm32f031k6u6-hero.glb",+    "stm32f031k6u6-hero.overlay.json"   ],-  "visibility": {-    "public": true-  }-}+  "visibility": "public",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
stm32f031k6u6-hero.glbadded
⋯ 1 unchanged line ⋯
stm32f031k6u6-hero.overlay.jsonadded+801
@@ -0,0 +1,801 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "STM32F031K6U6",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 33,+      "span_mm": 8.375,+      "dash_mm": 0.2094,+      "gap_mm": 0.1256,+      "pad_stroke_mm": 0.0503+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 32,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.46,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.5,+      2.5,+      -2.5,+      2.5+    ],+    "pads_bbox_mm": [+      -2.875,+      2.875,+      -2.875,+      2.875+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "stm32f031k6u6.glb",+    "glb_sha256": "c714ce5e0b9fec452f0b2dd9b1e2eaee4cfbe5cb9141cf8c71ee39af0919cc7b",+    "footprint": "stm32f031k6u6.kicad_mod",+    "footprint_sha256": "33c22382f224a9eb823bd99b8cf2c0bc75a2fa3588609586bdfe240986cb7125",+    "pins": "page.json component.pins",+    "pins_sha256": "81592f1d3f5f53a3364574edf154a33955e0293424afc4d24386503d70c1ae18"+  },+  "generator": "adom-wiki 1.7.68 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "VDD",+      "x": -3.57,+      "y": -1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "PF0-OSC_IN",+      "x": -2.975,+      "y": -1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "PF1-OSC_OUT",+      "x": -2.975,+      "y": -0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "NRST",+      "x": -2.975,+      "y": -0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "VDDA",+      "x": -2.975,+      "y": 0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "PA0",+      "x": -2.975,+      "y": 0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "PA1",+      "x": -2.975,+      "y": 1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "PA2",+      "x": -2.975,+      "y": 1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "PA3",+      "x": -1.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "PA4",+      "x": -1.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "PA5",+      "x": -0.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "PA6",+      "x": -0.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "PA7",+      "x": 0.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "PB0",+      "x": 0.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "PB1",+      "x": 1.25,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "PB2",+      "x": 1.75,+      "y": 2.975,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "VDD",+      "x": 2.975,+      "y": 1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "PA8",+      "x": 2.975,+      "y": 1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "PA9",+      "x": 2.975,+      "y": 0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "PA10",+      "x": 2.975,+      "y": 0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "21",+      "text": "PA11",+      "x": 2.975,+      "y": -0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "22",+      "text": "PA12",+      "x": 2.975,+      "y": -0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "23",+      "text": "PA13",+      "x": 2.975,+      "y": -1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "24",+      "text": "PA14",+      "x": 2.975,+      "y": -1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "25",+      "text": "PA15",+      "x": 1.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "26",+      "text": "PB3",+      "x": 1.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "27",+      "text": "PB4",+      "x": 0.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "28",+      "text": "PB5",+      "x": 0.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "29",+      "text": "PB6",+      "x": -0.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "30",+      "text": "PB7",+      "x": -0.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "31",+      "text": "BOOT0",+      "x": -1.25,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "32",+      "text": "PB8",+      "x": -1.75,+      "y": -2.975,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        -0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.4375,+        1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -0.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -0.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -1.25+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        2.4375,+        -1.75+      ],+      "size_mm": [+        0.875,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        -2.4375+      ],+      "size_mm": [+        0.25,+        0.875+      ],+      "rot": 0.0+    },+    {+      "number": "33",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        3.5,+        3.5+      ],+      "rot": 0.0+    }+  ]+}
stm32f031k6u6.kicad_sym+59−47
@@ -1,129 +1,141 @@ (kicad_symbol_lib (version 20211014) (generator ds2sf_rect)   (symbol "STM32F031K6U6" (in_bom yes) (on_board yes)     (property "Reference" "U" (at 0 22.86 0) (effects (font (size 1.27 1.27))))-    (property "Value" "STM32F031K6U6" (at 0 -22.86 0) (effects (font (size 1.27 1.27))))+    (property "Value" "STM32F031K6U6" (at 0 -25.40 0) (effects (font (size 1.27 1.27))))     (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))     (symbol "STM32F031K6U6_0_1"-    (rectangle (start -12.70 20.32) (end 12.70 -20.32)+    (rectangle (start -12.70 20.32) (end 12.70 -22.86)       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "STM32F031K6U6_1_1"     (pin power_in line (at -17.78 17.78 0) (length 5.08)-      (name "VSSA" (effects (font (size 1.27 1.27))))-      (number "0" (effects (font (size 1.27 1.27))))-    )-    (pin input line (at -17.78 15.24 0) (length 5.08)-      (name "BOOT0" (effects (font (size 1.27 1.27))))+      (name "VDD" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+    (pin bidirectional line (at -17.78 15.24 0) (length 5.08)       (name "PF0-OSC_IN" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+    (pin bidirectional line (at -17.78 12.70 0) (length 5.08)       (name "PF1-OSC_OUT" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+    (pin input line (at -17.78 10.16 0) (length 5.08)       (name "NRST" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 5.08 0) (length 5.08)+    (pin power_in line (at -17.78 7.62 0) (length 5.08)       (name "VDDA" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)       (name "PA0" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+    (pin bidirectional line (at -17.78 2.54 0) (length 5.08)       (name "PA1" (effects (font (size 1.27 1.27))))       (number "7" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+    (pin bidirectional line (at -17.78 0.00 0) (length 5.08)       (name "PA2" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)       (name "PA3" (effects (font (size 1.27 1.27))))       (number "9" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)       (name "PA4" (effects (font (size 1.27 1.27))))       (number "10" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)       (name "PA5" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)       (name "PA6" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)       (name "PA7" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+    (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)       (name "PB0" (effects (font (size 1.27 1.27))))       (number "14" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 15.24 180) (length 5.08)-      (name "PB7" (effects (font (size 1.27 1.27))))-      (number "28" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+      (name "PB1" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -20.32 0) (length 5.08)+      (name "PB2" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 17.78 180) (length 5.08)+      (name "PB8" (effects (font (size 1.27 1.27))))+      (number "32" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 15.24 180) (length 5.08)+      (name "BOOT0" (effects (font (size 1.27 1.27))))+      (number "31" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 12.70 180) (length 5.08)-      (name "PB6" (effects (font (size 1.27 1.27))))-      (number "27" (effects (font (size 1.27 1.27))))+      (name "PB7" (effects (font (size 1.27 1.27))))+      (number "30" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 10.16 180) (length 5.08)-      (name "PB5" (effects (font (size 1.27 1.27))))-      (number "26" (effects (font (size 1.27 1.27))))+      (name "PB6" (effects (font (size 1.27 1.27))))+      (number "29" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 7.62 180) (length 5.08)-      (name "PB4" (effects (font (size 1.27 1.27))))-      (number "25" (effects (font (size 1.27 1.27))))+      (name "PB5" (effects (font (size 1.27 1.27))))+      (number "28" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 5.08 180) (length 5.08)-      (name "PB3" (effects (font (size 1.27 1.27))))-      (number "24" (effects (font (size 1.27 1.27))))+      (name "PB4" (effects (font (size 1.27 1.27))))+      (number "27" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "PB3" (effects (font (size 1.27 1.27))))+      (number "26" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)       (name "PA15" (effects (font (size 1.27 1.27))))+      (number "25" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "PA14" (effects (font (size 1.27 1.27))))+      (number "24" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "PA13" (effects (font (size 1.27 1.27))))       (number "23" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)-      (name "PA14(SWCLK)" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "PA12" (effects (font (size 1.27 1.27))))       (number "22" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)-      (name "PA13(SWDIO)" (effects (font (size 1.27 1.27))))+    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+      (name "PA11" (effects (font (size 1.27 1.27))))       (number "21" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)       (name "PA10" (effects (font (size 1.27 1.27))))       (number "20" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+    (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)       (name "PA9" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+    (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)       (name "PA8" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 -12.70 180) (length 5.08)+    (pin power_in line (at 17.78 -20.32 180) (length 5.08)       (name "VDD" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 -15.24 180) (length 5.08)-      (name "VSS" (effects (font (size 1.27 1.27))))-      (number "16" (effects (font (size 1.27 1.27))))-    )-    (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)-      (name "PB1" (effects (font (size 1.27 1.27))))-      (number "15" (effects (font (size 1.27 1.27))))-    )     )   ) )
stm32f031k6u6.lbr+88−80
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm (symbol synthesized from footprint pads)</description>+<description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST&apos;s open pin data</description> <packages> <package name="UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm">   <description>UFQFPN-32-1EP, 5 x 5 mm, 0.5 mm pitch</description>@@ -86,7 +86,7 @@   <smd name="30" x="-0.7500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>   <smd name="31" x="-1.2500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>   <smd name="32" x="-1.7500" y="2.4375" dx="0.2500" dy="0.8750" layer="1" roundness="50"/>-  <smd name="33" x="0.0000" y="-0.0000" dx="3.5000" dy="3.5000" layer="1"/>+  <smd name="33" x="0.0000" y="-0.0000" dx="3.5000" dy="3.5000" layer="1" cream="no"/>   <polygon width="0.1200" layer="21">     <vertex x="-3.1400" y="1.7500"/>     <vertex x="-3.4700" y="1.5100"/>@@ -112,93 +112,101 @@ </package> </packages> <symbols>-<symbol name="UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm">-  <description>UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm (symbol synthesized from footprint pads)</description>-  <wire x1="-7.62" y1="22.86" x2="7.62" y2="22.86" width="0.254" layer="94"/>-  <wire x1="7.62" y1="22.86" x2="7.62" y2="-22.86" width="0.254" layer="94"/>-  <wire x1="7.62" y1="-22.86" x2="-7.62" y2="-22.86" width="0.254" layer="94"/>-  <wire x1="-7.62" y1="-22.86" x2="-7.62" y2="22.86" width="0.254" layer="94"/>-  <text x="0" y="25.4" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>-  <text x="0" y="-25.4" size="1.27" layer="96" align="top-center">&gt;VALUE</text>-  <pin name="1" x="-12.7" y="21.59" length="short" direction="pas"/>-  <pin name="2" x="-12.7" y="19.05" length="short" direction="pas"/>-  <pin name="3" x="-12.7" y="16.51" length="short" direction="pas"/>-  <pin name="4" x="-12.7" y="13.97" length="short" direction="pas"/>-  <pin name="5" x="-12.7" y="11.43" length="short" direction="pas"/>-  <pin name="6" x="-12.7" y="8.89" length="short" direction="pas"/>-  <pin name="7" x="-12.7" y="6.35" length="short" direction="pas"/>-  <pin name="8" x="-12.7" y="3.81" length="short" direction="pas"/>-  <pin name="9" x="-12.7" y="1.27" length="short" direction="pas"/>-  <pin name="10" x="-12.7" y="-1.27" length="short" direction="pas"/>-  <pin name="11" x="-12.7" y="-3.81" length="short" direction="pas"/>-  <pin name="12" x="-12.7" y="-6.35" length="short" direction="pas"/>-  <pin name="13" x="-12.7" y="-8.89" length="short" direction="pas"/>-  <pin name="14" x="-12.7" y="-11.43" length="short" direction="pas"/>-  <pin name="15" x="-12.7" y="-13.97" length="short" direction="pas"/>-  <pin name="16" x="-12.7" y="-16.51" length="short" direction="pas"/>-  <pin name="17" x="-12.7" y="-19.05" length="short" direction="pas"/>-  <pin name="18" x="12.7" y="21.59" length="short" direction="pas" rot="R180"/>-  <pin name="19" x="12.7" y="19.05" length="short" direction="pas" rot="R180"/>-  <pin name="20" x="12.7" y="16.51" length="short" direction="pas" rot="R180"/>-  <pin name="21" x="12.7" y="13.97" length="short" direction="pas" rot="R180"/>-  <pin name="22" x="12.7" y="11.43" length="short" direction="pas" rot="R180"/>-  <pin name="23" x="12.7" y="8.89" length="short" direction="pas" rot="R180"/>-  <pin name="24" x="12.7" y="6.35" length="short" direction="pas" rot="R180"/>-  <pin name="25" x="12.7" y="3.81" length="short" direction="pas" rot="R180"/>-  <pin name="26" x="12.7" y="1.27" length="short" direction="pas" rot="R180"/>-  <pin name="27" x="12.7" y="-1.27" length="short" direction="pas" rot="R180"/>-  <pin name="28" x="12.7" y="-3.81" length="short" direction="pas" rot="R180"/>-  <pin name="29" x="12.7" y="-6.35" length="short" direction="pas" rot="R180"/>-  <pin name="30" x="12.7" y="-8.89" length="short" direction="pas" rot="R180"/>-  <pin name="31" x="12.7" y="-11.43" length="short" direction="pas" rot="R180"/>-  <pin name="32" x="12.7" y="-13.97" length="short" direction="pas" rot="R180"/>-  <pin name="33" x="12.7" y="-16.51" length="short" direction="pas" rot="R180"/>+<symbol name="STM32F031K6U6">+  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST&apos;s open pin data</description>+  <wire x1="-12.7" y1="20.32" x2="12.7" y2="20.32" width="0.254" layer="94"/>+  <wire x1="12.7" y1="20.32" x2="12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-22.86" x2="-12.7" y2="20.32" width="0.254" layer="94"/>+  <text x="0.0000" y="22.8600" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-25.4000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="VDD" x="-17.78" y="17.78" length="middle" direction="pwr"/>+  <pin name="PF0-OSC_IN" x="-17.78" y="15.24" length="middle" direction="io"/>+  <pin name="PF1-OSC_OUT" x="-17.78" y="12.7" length="middle" direction="io"/>+  <pin name="NRST" x="-17.78" y="10.16" length="middle" direction="in"/>+  <pin name="VDDA" x="-17.78" y="7.62" length="middle" direction="pwr"/>+  <pin name="PA0" x="-17.78" y="5.08" length="middle" direction="io"/>+  <pin name="PA1" x="-17.78" y="2.54" length="middle" direction="io"/>+  <pin name="PA2" x="-17.78" y="0" length="middle" direction="io"/>+  <pin name="PA3" x="-17.78" y="-2.54" length="middle" direction="io"/>+  <pin name="PA4" x="-17.78" y="-5.08" length="middle" direction="io"/>+  <pin name="PA5" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="PA6" x="-17.78" y="-10.16" length="middle" direction="io"/>+  <pin name="PA7" x="-17.78" y="-12.7" length="middle" direction="io"/>+  <pin name="PB0" x="-17.78" y="-15.24" length="middle" direction="io"/>+  <pin name="PB1" x="-17.78" y="-17.78" length="middle" direction="io"/>+  <pin name="PB2" x="-17.78" y="-20.32" length="middle" direction="io"/>+  <pin name="PB8" x="17.78" y="17.78" length="middle" direction="io" rot="R180"/>+  <pin name="BOOT0" x="17.78" y="15.24" length="middle" direction="in" rot="R180"/>+  <pin name="PB7" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+  <pin name="PB6" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+  <pin name="PB5" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PB4" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="PB3" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PA15" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="PA14" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PA13" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="PA12" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PA11" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="PA10" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+  <pin name="PA9" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>+  <pin name="PA8" x="17.78" y="-17.78" length="middle" direction="io" rot="R180"/>+  <pin name="VDD@2" x="17.78" y="-20.32" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm" prefix="U">-  <description>UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm (symbol synthesized from footprint pads)</description>+<deviceset name="STM32F031K6U6" prefix="U">+  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-32(5x5). Pinout checked against ST&apos;s open pin data</description>   <gates>-    <gate name="G$1" symbol="UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm" x="0" y="0"/>+    <gate name="G$1" symbol="STM32F031K6U6" x="0" y="0"/>   </gates>   <devices>     <device name="" package="UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm">       <connects>-        <connect gate="G$1" pin="1" pad="1"/>-        <connect gate="G$1" pin="2" pad="2"/>-        <connect gate="G$1" pin="3" pad="3"/>-        <connect gate="G$1" pin="4" pad="4"/>-        <connect gate="G$1" pin="5" pad="5"/>-        <connect gate="G$1" pin="6" pad="6"/>-        <connect gate="G$1" pin="7" pad="7"/>-        <connect gate="G$1" pin="8" pad="8"/>-        <connect gate="G$1" pin="9" pad="9"/>-        <connect gate="G$1" pin="10" pad="10"/>-        <connect gate="G$1" pin="11" pad="11"/>-        <connect gate="G$1" pin="12" pad="12"/>-        <connect gate="G$1" pin="13" pad="13"/>-        <connect gate="G$1" pin="14" pad="14"/>-        <connect gate="G$1" pin="15" pad="15"/>-        <connect gate="G$1" pin="16" pad="16"/>-        <connect gate="G$1" pin="17" pad="17"/>-        <connect gate="G$1" pin="18" pad="18"/>-        <connect gate="G$1" pin="19" pad="19"/>-        <connect gate="G$1" pin="20" pad="20"/>-        <connect gate="G$1" pin="21" pad="21"/>-        <connect gate="G$1" pin="22" pad="22"/>-        <connect gate="G$1" pin="23" pad="23"/>-        <connect gate="G$1" pin="24" pad="24"/>-        <connect gate="G$1" pin="25" pad="25"/>-        <connect gate="G$1" pin="26" pad="26"/>-        <connect gate="G$1" pin="27" pad="27"/>-        <connect gate="G$1" pin="28" pad="28"/>-        <connect gate="G$1" pin="29" pad="29"/>-        <connect gate="G$1" pin="30" pad="30"/>-        <connect gate="G$1" pin="31" pad="31"/>-        <connect gate="G$1" pin="32" pad="32"/>-        <connect gate="G$1" pin="33" pad="33"/>+        <connect gate="G$1" pin="VDD" pad="1"/>+        <connect gate="G$1" pin="PF0-OSC_IN" pad="2"/>+        <connect gate="G$1" pin="PF1-OSC_OUT" pad="3"/>+        <connect gate="G$1" pin="NRST" pad="4"/>+        <connect gate="G$1" pin="VDDA" pad="5"/>+        <connect gate="G$1" pin="PA0" pad="6"/>+        <connect gate="G$1" pin="PA1" pad="7"/>+        <connect gate="G$1" pin="PA2" pad="8"/>+        <connect gate="G$1" pin="PA3" pad="9"/>+        <connect gate="G$1" pin="PA4" pad="10"/>+        <connect gate="G$1" pin="PA5" pad="11"/>+        <connect gate="G$1" pin="PA6" pad="12"/>+        <connect gate="G$1" pin="PA7" pad="13"/>+        <connect gate="G$1" pin="PB0" pad="14"/>+        <connect gate="G$1" pin="PB1" pad="15"/>+        <connect gate="G$1" pin="PB2" pad="16"/>+        <connect gate="G$1" pin="PB8" pad="32"/>+        <connect gate="G$1" pin="BOOT0" pad="31"/>+        <connect gate="G$1" pin="PB7" pad="30"/>+        <connect gate="G$1" pin="PB6" pad="29"/>+        <connect gate="G$1" pin="PB5" pad="28"/>+        <connect gate="G$1" pin="PB4" pad="27"/>+        <connect gate="G$1" pin="PB3" pad="26"/>+        <connect gate="G$1" pin="PA15" pad="25"/>+        <connect gate="G$1" pin="PA14" pad="24"/>+        <connect gate="G$1" pin="PA13" pad="23"/>+        <connect gate="G$1" pin="PA12" pad="22"/>+        <connect gate="G$1" pin="PA11" pad="21"/>+        <connect gate="G$1" pin="PA10" pad="20"/>+        <connect gate="G$1" pin="PA9" pad="19"/>+        <connect gate="G$1" pin="PA8" pad="18"/>+        <connect gate="G$1" pin="VDD@2" pad="17"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="STM32F031K6U6" constant="no"/>+          <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181681975857152" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/stm32f031k6u6" constant="no"/>+          <attribute name="MOUSER_PN" value="511-STM32F031K6U6" constant="no"/>+          <attribute name="DIGIKEY_PN" value="497-13622-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C97412" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>