← Commit history

Initial commit: component/stm32f031f4p6

Ray ·a690639c68 ·
2 files changed +271
README.mdadded+56
@@ -0,0 +1,56 @@+# STM32F031F4P6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20++STM32F031F4P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BOOT0 | input | Dedicated boot-selection input (I/O structure type B) used with the boot-selector option bit at startup to choose between booting from user Flash, System memory (bootloader), or embedded SRAM; absolute maximum input voltage range is 0 to 9.0 V. |+| 2 | PF0 | bidirectional | 5V-tolerant (FT) general-purpose I/O PF0 (floating input after reset) that can alternatively be configured as OSC_IN, the input of the 4-32 MHz external HSE crystal/resonator or external clock source. |+| 3 | PF1 | bidirectional | 5V-tolerant (FT) general-purpose I/O PF1 (floating input after reset) that can alternatively be configured as OSC_OUT, the output of the 4-32 MHz external HSE crystal/resonator oscillator. |+| 4 | NRST | bidirectional | Bidirectional reset pin (RST structure) with an embedded weak pull-up resistor (typ. 40 kΩ); active-low external reset input and internal power-on/power-down reset output. |+| 5 | VDDA | power_in | External analog power supply pin for the ADC, reset block, RC oscillators and PLL; must be from VDD up to 3.6 V (minimum 2.4 V when the ADC is used) and must be established before or with VDD. |+| 6 | PA0 | bidirectional | 3.3V ADC-tolerant (TTa) I/O PA0 with alternate functions TIM2_CH1_ETR and USART1_CTS, and additional functions ADC_IN0, RTC_TAMP2 and WKUP1 (Standby-mode wakeup pin 1). |+| 7 | PA1 | bidirectional | TTa I/O PA1 with alternate functions TIM2_CH2, EVENTOUT and USART1_RTS, and additional function ADC_IN1. |+| 8 | PA2 | bidirectional | TTa I/O PA2 with alternate functions USART1_TX and TIM2_CH3, and additional function ADC_IN2. |+| 9 | PA3 | bidirectional | TTa I/O PA3 with alternate functions USART1_RX and TIM2_CH4, and additional function ADC_IN3. |+| 10 | PA4 | bidirectional | TTa I/O PA4 with alternate functions SPI1_NSS/I2S1_WS, USART1_CK and TIM14_CH1, and additional function ADC_IN4. |+| 11 | PA5 | bidirectional | TTa I/O PA5 with alternate functions SPI1_SCK/I2S1_CK and TIM2_CH1_ETR, and additional function ADC_IN5. |+| 12 | PA6 | bidirectional | TTa I/O PA6 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1 and EVENTOUT, and additional function ADC_IN6. |+| 13 | PA7 | bidirectional | TTa I/O PA7 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1 and EVENTOUT, and additional function ADC_IN7. |+| 14 | PB1 | bidirectional | TTa I/O PB1 with alternate functions TIM3_CH4, TIM14_CH1 and TIM1_CH3N, and additional function ADC_IN9. |+| 15 | VSS | power_in | Ground pin; the TSSOP20 package has no separate VSSA pin, so per datasheet note (3) the VSSA pad of the die is internally connected to this VSS pin. |+| 16 | VDD | power_in | Digital power supply pin, 2.0 V to 3.6 V, for the I/O ring (VDDIO1) and the internal voltage regulator. |+| 17 | PA9 | bidirectional | 5V-tolerant, Fast-mode-Plus-capable (FTf) I/O PA9 with alternate functions USART1_TX, TIM1_CH2 and I2C1_SCL (I2C1 supports Fast Mode Plus up to 1 Mbit/s with 20 mA sink on this pin). |+| 18 | PA10 | bidirectional | FTf I/O PA10 with alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA (I2C1 supports Fast Mode Plus up to 1 Mbit/s with 20 mA sink on this pin). |+| 19 | PA13 | bidirectional | 5V-tolerant (FT) I/O PA13 with alternate functions IR_OUT and SWDIO; per note (5), after reset this pin defaults to the SWDIO alternate function with its internal pull-up resistor activated. |+| 20 | PA14 | bidirectional | FT I/O PA14 with alternate functions USART1_TX and SWCLK; per note (5), after reset this pin defaults to the SWCLK alternate function with its internal pull-down resistor activated. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-20 |+| Category | Embedded Processors & Controllers |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STM32F031F4P6`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `stm32f031f4p6-etched.step` / `stm32f031f4p6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f031f4p6.step` / `stm32f031f4p6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920064728289280) (106 pp, sha256 `36b17e3dce795273`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f031f4p6-datasheet.pdf)
page.jsonadded+215
@@ -0,0 +1,215 @@+{+  "slug": "stm32f031f4p6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f031f4p6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f031f4p6.kicad_sym",+    "stm32f031f4p6.kicad_mod",+    "stm32f031f4p6.glb",+    "stm32f031f4p6.step",+    "stm32f031f4p6.lbr",+    "docs/hero.png",+    "docs/stm32f031f4p6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F031F4P6",+    "manufacturer": "STMicroelectronics",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920064728289280",+    "parts": {+      "symbol": "stm32f031f4p6.kicad_sym",+      "footprint": "stm32f031f4p6.kicad_mod",+      "model_3d": "stm32f031f4p6-etched.glb",+      "model_3d_plain": "stm32f031f4p6.glb",+      "model_3d_step": "stm32f031f4p6-etched.step",+      "model_3d_step_plain": "stm32f031f4p6.step",+      "lbr": "stm32f031f4p6.lbr"+    },+    "distributor_links": {+      "lcsc": "C1340491"+    },+    "pins": [+      {+        "number": "1",+        "name": "BOOT0",+        "type": "input",+        "description": "Dedicated boot-selection input (I/O structure type B) used with the boot-selector option bit at startup to choose between booting from user Flash, System memory (bootloader), or embedded SRAM; absolute maximum input voltage range is 0 to 9.0 V."+      },+      {+        "number": "2",+        "name": "PF0",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) general-purpose I/O PF0 (floating input after reset) that can alternatively be configured as OSC_IN, the input of the 4-32 MHz external HSE crystal/resonator or external clock source."+      },+      {+        "number": "3",+        "name": "PF1",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) general-purpose I/O PF1 (floating input after reset) that can alternatively be configured as OSC_OUT, the output of the 4-32 MHz external HSE crystal/resonator oscillator."+      },+      {+        "number": "4",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin (RST structure) with an embedded weak pull-up resistor (typ. 40 kΩ); active-low external reset input and internal power-on/power-down reset output."+      },+      {+        "number": "5",+        "name": "VDDA",+        "type": "power_in",+        "description": "External analog power supply pin for the ADC, reset block, RC oscillators and PLL; must be from VDD up to 3.6 V (minimum 2.4 V when the ADC is used) and must be established before or with VDD."+      },+      {+        "number": "6",+        "name": "PA0",+        "type": "bidirectional",+        "description": "3.3V ADC-tolerant (TTa) I/O PA0 with alternate functions TIM2_CH1_ETR and USART1_CTS, and additional functions ADC_IN0, RTC_TAMP2 and WKUP1 (Standby-mode wakeup pin 1)."+      },+      {+        "number": "7",+        "name": "PA1",+        "type": "bidirectional",+        "description": "TTa I/O PA1 with alternate functions TIM2_CH2, EVENTOUT and USART1_RTS, and additional function ADC_IN1."+      },+      {+        "number": "8",+        "name": "PA2",+        "type": "bidirectional",+        "description": "TTa I/O PA2 with alternate functions USART1_TX and TIM2_CH3, and additional function ADC_IN2."+      },+      {+        "number": "9",+        "name": "PA3",+        "type": "bidirectional",+        "description": "TTa I/O PA3 with alternate functions USART1_RX and TIM2_CH4, and additional function ADC_IN3."+      },+      {+        "number": "10",+        "name": "PA4",+        "type": "bidirectional",+        "description": "TTa I/O PA4 with alternate functions SPI1_NSS/I2S1_WS, USART1_CK and TIM14_CH1, and additional function ADC_IN4."+      },+      {+        "number": "11",+        "name": "PA5",+        "type": "bidirectional",+        "description": "TTa I/O PA5 with alternate functions SPI1_SCK/I2S1_CK and TIM2_CH1_ETR, and additional function ADC_IN5."+      },+      {+        "number": "12",+        "name": "PA6",+        "type": "bidirectional",+        "description": "TTa I/O PA6 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1 and EVENTOUT, and additional function ADC_IN6."+      },+      {+        "number": "13",+        "name": "PA7",+        "type": "bidirectional",+        "description": "TTa I/O PA7 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1 and EVENTOUT, and additional function ADC_IN7."+      },+      {+        "number": "14",+        "name": "PB1",+        "type": "bidirectional",+        "description": "TTa I/O PB1 with alternate functions TIM3_CH4, TIM14_CH1 and TIM1_CH3N, and additional function ADC_IN9."+      },+      {+        "number": "15",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin; the TSSOP20 package has no separate VSSA pin, so per datasheet note (3) the VSSA pad of the die is internally connected to this VSS pin."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 2.0 V to 3.6 V, for the I/O ring (VDDIO1) and the internal voltage regulator."+      },+      {+        "number": "17",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5V-tolerant, Fast-mode-Plus-capable (FTf) I/O PA9 with alternate functions USART1_TX, TIM1_CH2 and I2C1_SCL (I2C1 supports Fast Mode Plus up to 1 Mbit/s with 20 mA sink on this pin)."+      },+      {+        "number": "18",+        "name": "PA10",+        "type": "bidirectional",+        "description": "FTf I/O PA10 with alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA (I2C1 supports Fast Mode Plus up to 1 Mbit/s with 20 mA sink on this pin)."+      },+      {+        "number": "19",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant (FT) I/O PA13 with alternate functions IR_OUT and SWDIO; per note (5), after reset this pin defaults to the SWDIO alternate function with its internal pull-up resistor activated."+      },+      {+        "number": "20",+        "name": "PA14",+        "type": "bidirectional",+        "description": "FT I/O PA14 with alternate functions USART1_TX and SWCLK; per note (5), after reset this pin defaults to the SWCLK alternate function with its internal pull-down resistor activated."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "4/20 pins cited to the wrong page (name found elsewhere): ['17:PA9@p26', '18:PA10@p26', '19:PA13@p26', '20:PA14@p26']"+        ],+        "pages_sent": 106,+        "cost_usd": 1.0439,+        "at": "2026-09-24T07:29:53"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920064728289280",+        "pages": 106,+        "sha256": "36b17e3dce795273",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file