main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm32f030rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm32f030rct6: viewers · Ray
package.json stm32f030rct6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json stm32f030rct6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/stm32f030rct6 · Ray
stm32f030rct6-etched.fit.json stm32f030rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f030rct6-etched.glb stm32f030rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f030rct6-etched.step stm32f030rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f030rct6.glb Publish 0.1.0 · Ray
stm32f030rct6.kicad_mod Publish 0.1.0 · Ray
stm32f030rct6.kicad_sym Publish 0.1.0 · Ray
stm32f030rct6.lbr Publish 0.1.0 · Ray
stm32f030rct6.step Publish 0.1.0 · Ray

STM32F030RCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32F030RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Main digital supply voltage input, 2.4 to 3.6 V required for I/O and internal regulator
2 PC13 bidirectional GPIO port C pin 13, 3.3 V I/O with 2 MHz max output speed and 30 pF max load; alternate functions RTC_TAMP1, RTC_TS, RTC_OUT
3 PC14-OSC32_IN bidirectional GPIO port C pin 14 or 32.768 kHz oscillator input pin
4 PC15-OSC32_OUT bidirectional GPIO port C pin 15 or 32.768 kHz oscillator output pin
5 PF0-OSC_IN bidirectional GPIO port F pin 0, 5 V tolerant I/O or 4-32 MHz high-speed oscillator input; I2C1_SDA alternate function
6 PF1-OSC_OUT bidirectional GPIO port F pin 1, 5 V tolerant I/O or high-speed oscillator output; I2C1_SCL alternate function
7 NRST bidirectional Active-low asynchronous reset input with embedded 25-55 kΩ pull-up resistor and 100 ns noise filter
8 PC0 bidirectional GPIO port C pin 0, 3.3 V tolerant I/O, ADC input channel 10 with EVENTOUT and USART6_TX alternate functions for xC devices
9 PC1 bidirectional GPIO port C pin 1, 3.3 V tolerant I/O, ADC input channel 11 with EVENTOUT and USART6_RX alternate functions for xC devices
10 PC2 bidirectional GPIO port C pin 2, 3.3 V tolerant I/O, ADC input channel 12 with SPI2_MISO and EVENTOUT alternate functions for xC devices
11 PC3 bidirectional GPIO port C pin 3, 3.3 V tolerant I/O, ADC input channel 13 with SPI2_MOSI and EVENTOUT alternate functions for xC devices
12 VSSA power_in Analog ground reference for ADC, reset blocks, RCs and PLL
13 VDDA power_in Analog power supply input, 2.4 to 3.6 V, must be ≥ VDD and provided first during power-up
14 PA0 bidirectional GPIO port A pin 0, 3.3 V tolerant I/O, ADC input channel 0, WKUP1 wakeup pin, alternate USART/timer functions
15 PA1 bidirectional GPIO port A pin 1, 3.3 V tolerant I/O, ADC input channel 1 with USART1_RTS/USART2_RTS and USART4_RX alternates
16 PA2 bidirectional GPIO port A pin 2, 3.3 V tolerant I/O, ADC input channel 2, WKPU4 wakeup, alternate USART1_TX/USART2_TX/TIM15_CH1
17 PA3 bidirectional GPIO port A pin 3, 3.3 V tolerant I/O, ADC input channel 3 with USART1_RX/USART2_RX and TIM15_CH2 alternates
18 VSS power_in Ground supply pin for xC variant (additional current sinking path)
19 VDD power_in Digital supply voltage input 2.4 to 3.6 V for xC variant (additional supply pin)
20 PA4 bidirectional GPIO port A pin 4, 3.3 V tolerant I/O, ADC input channel 4, alternate SPI1_NSS/USART1_CK/TIM14_CH1/USART6_TX
21 PA5 bidirectional GPIO port A pin 5, 3.3 V tolerant I/O, ADC input channel 5 with SPI1_SCK and USART6_RX alternate functions
22 PA6 bidirectional GPIO port A pin 6, 3.3 V tolerant I/O, ADC input channel 6 with SPI1_MISO/timer/TIM1_BKIN and USART3_CTS alternates
23 PA7 bidirectional GPIO port A pin 7, 3.3 V tolerant I/O, ADC input channel 7 with SPI1_MOSI/timer and TIM1_CH1N alternate functions
24 PC4 bidirectional GPIO port C pin 4, 3.3 V tolerant I/O, ADC input channel 14 with EVENTOUT and USART3_TX alternates for xC devices
25 PC5 bidirectional GPIO port C pin 5, 3.3 V tolerant I/O, ADC input channel 15, WKPU5 wakeup, alternate USART3_RX for xC
26 PB0 bidirectional GPIO port B pin 0, 3.3 V tolerant I/O, ADC input channel 8 with timer/TIM1_CH2N and USART3_CK alternates
27 PB1 bidirectional GPIO port B pin 1, 3.3 V tolerant I/O, ADC input channel 9 with timer/TIM1_CH3N and USART3_RTS alternates
28 PB2 bidirectional GPIO port B pin 2, 5 V tolerant I/O with no default alternate functions
29 PB10 bidirectional GPIO port B pin 10, 5 V tolerant I/O with I2C1_SCL/I2C2_SCL and SPI2_SCK/USART3_TX alternates for xC
30 PB11 bidirectional GPIO port B pin 11, 5 V tolerant I/O with I2C1_SDA/I2C2_SDA and USART3_RX alternate functions
31 VSS power_in Ground supply pin
32 VDD power_in Digital power supply input, 2.4 to 3.6 V
33 PB12 bidirectional GPIO port B pin 12, 5 V tolerant I/O with SPI2_NSS/TIM1_BKIN and USART3_CK alternate functions for xC
34 PB13 bidirectional GPIO port B pin 13, 5 V tolerant I/O with SPI1_SCK/SPI2_SCK/I2C2_SCL/TIM1_CH1N/USART3_CTS alternates
35 PB14 bidirectional GPIO port B pin 14, 5 V tolerant I/O with SPI/I2C2_SDA/timer/TIM15_CH1 and USART3_RTS alternate functions
36 PB15 bidirectional GPIO port B pin 15, 5 V tolerant I/O with SPI/timer/RTC_REFIN alternates including WKPU7 for xC
37 PC6 bidirectional GPIO port C pin 6, 5 V tolerant I/O with TIM3_CH1 alternate function for xC devices
38 PC7 bidirectional GPIO port C pin 7, 5 V tolerant I/O with TIM3_CH2 alternate function for xC devices
39 PC8 bidirectional GPIO port C pin 8, 5 V tolerant I/O with TIM3_CH3 alternate function for xC devices
40 PC9 bidirectional GPIO port C pin 9, 5 V tolerant I/O with TIM3_CH4 alternate function for xC devices
41 PA8 bidirectional GPIO port A pin 8, 5 V tolerant I/O with USART1_CK/TIM1_CH1/MCO alternate functions
42 PA9 bidirectional GPIO port A pin 9, 5 V tolerant I/O with USART1_TX/TIM1_CH2 and I2C1_SCL alternate functions
43 PA10 bidirectional GPIO port A pin 10, 5 V tolerant I/O with USART1_RX/TIM1_CH3 and I2C1_SDA alternate functions
44 PA11 bidirectional GPIO port A pin 11, 5 V tolerant I/O with USART1_CTS/TIM1_CH4 and I2C2_SCL alternate functions
45 PA12 bidirectional GPIO port A pin 12, 5 V tolerant I/O with USART1_RTS/TIM1_ETR and I2C2_SDA alternate functions
46 PA13 (SWDIO) bidirectional Serial Wire Debug I/O pin, 5 V tolerant with internal pull-up after reset; alternate IR_OUT function
47 VSS power_in Ground supply pin for xC variant (additional current sinking path)
48 VDD power_in Digital supply voltage input 2.4 to 3.6 V for xC variant (additional supply pin)
49 PA14 (SWCLK) bidirectional Serial Wire Debug clock pin, 5 V tolerant with internal pull-down after reset; alternate USART1_TX/USART2_TX
50 PA15 bidirectional GPIO port A pin 15, 5 V tolerant I/O with SPI1_NSS and USART1_RX/USART2_RX/USART4_RTS alternates
51 PC10 bidirectional GPIO port C pin 10, 5 V tolerant I/O with USART3_TX and USART4_TX alternate functions for xC
52 PC11 bidirectional GPIO port C pin 11, 5 V tolerant I/O with USART3_RX and USART4_RX alternate functions for xC
53 PC12 bidirectional GPIO port C pin 12, 5 V tolerant I/O with USART3_CK/USART4_CK and USART5_TX alternates for xC
54 PD2 bidirectional GPIO port D pin 2, 5 V tolerant I/O with TIM3_ETR and USART3_RTS/USART5_RX alternates for xC
55 PB3 bidirectional GPIO port B pin 3, 5 V tolerant I/O with SPI1_SCK and USART5_TX alternate functions for xC
56 PB4 bidirectional GPIO port B pin 4, 5 V tolerant I/O with SPI1_MISO/TIM3_CH1/TIM17_BKIN and USART5_RX alternates
57 PB5 bidirectional GPIO port B pin 5, 5 V tolerant I/O with SPI1_MOSI/I2C1_SMBA/TIM16_BKIN/USART5_CK_RTS alternates, WKPU6
58 PB6 bidirectional GPIO port B pin 6, 5 V FM+ capable with 20 mA I2C output drive; I2C1_SCL/USART1_TX/TIM16_CH1N alternates
59 PB7 bidirectional GPIO port B pin 7, 5 V FM+ capable with 20 mA I2C output drive; I2C1_SDA/USART1_RX/TIM17_CH1N alternates
60 BOOT0 input Boot mode selection input pin; 0 = boot from main flash, 1 = boot from system memory
61 PB8 bidirectional GPIO port B pin 8, 5 V FM+ capable with I2C1_SCL and TIM16_CH1 alternate functions
62 PB9 bidirectional GPIO port B pin 9, 5 V FM+ capable; alternate I2C1_SDA/IR_OUT/SPI2_NSS/TIM17_CH1 functions
63 VSS power_in Ground supply pin
64 VDD power_in Digital power supply input, 2.4 to 3.6 V

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32F030RCT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f030rct6-etched.step / stm32f030rct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f030rct6.step / stm32f030rct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (91 pp, sha256 faac9340687f6951, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF