component
STM32F030F4P6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F030F4P6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
STM32F030F4P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT0 | input | Input pin for boot mode selection; checked during power-up and reset to select User Flash, System Memory, or embedded SRAM boot. |
| 2 | PF0/OSC_IN | bidirectional | External crystal oscillator input or bypass clock input for 4-32 MHz operation; can be configured as general-purpose I/O. |
| 3 | PF1/OSC_OUT | bidirectional | External crystal oscillator output; can be configured as general-purpose I/O. |
| 4 | NRST | bidirectional | Active-low reset input/output with internal weak pull-up (40-55 kΩ) and Schmitt trigger; integrated filtering and temporization (1.5-2.5 ms). |
| 5 | VDDA | power_in | Analog power supply input (2.4-3.6 V); must be maintained ≥ VDD and applied before or simultaneously with VDD during power-up. |
| 6 | PA0 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN0; alternate functions: USART1/2_CTS; additional: RTC_TAMP2, WKUP1. |
| 7 | PA1 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN1; alternate functions: USART1/2_RTS, EVENTOUT. |
| 8 | PA2 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN2; alternate functions: USART1/2_TX, TIM15_CH1. |
| 9 | PA3 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN3; alternate functions: USART1/2_RX, TIM15_CH2. |
| 10 | PA4 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN4; alternate functions: SPI1_NSS, USART1/2_CK, TIM14_CH1. |
| 11 | PA5 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN5; alternate function: SPI1_SCK. |
| 12 | PA6 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN6; alternate functions: SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT. |
| 13 | PA7 | bidirectional | General-purpose I/O on GPIO port A; ADC_IN7; alternate functions: SPI1_MOSI, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT. |
| 14 | PB1 | bidirectional | General-purpose I/O on GPIO port B; ADC_IN9; alternate functions: TIM3_CH4, TIM14_CH1, TIM1_CH3N. |
| 15 | VSS | power_in | Ground connection for digital circuits and power return path; negative reference for all logic circuitry. |
| 16 | VDD | power_out | Digital power supply input (2.4-3.6 V); provides power to I/O pads and internal voltage regulator generating 1.8 V for core logic. |
| 17 | PA9 | bidirectional | General-purpose I/O on GPIO port A; alternate functions: USART1_TX, TIM1_CH2, TIM15_BKIN, I2C1_SCL. |
| 18 | PA10 | bidirectional | General-purpose I/O on GPIO port A; alternate functions: USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA. |
| 19 | PA13 | bidirectional | General-purpose I/O on GPIO port A (configured as SWDIO after reset); alternate functions: IR_OUT, SWDIO (Serial Wire Debug interface). |
| 20 | PA14 | bidirectional | General-purpose I/O on GPIO port A (configured as SWCLK after reset); alternate functions: USART1/2_TX, SWCLK (Serial Wire Debug interface). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
STM32F030F4P6 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
stm32f030f4p6-etched.step/stm32f030f4p6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f030f4p6.step/stm32f030f4p6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (88 pp, sha256
2cb57cb91b7694e1, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).