component
STM32C092CBT6
Public Made by Adomby adom
STMicroelectronics , LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
f27b2f8
STM32C092CBT6
STMicroelectronics · IC · LQFP-48(7x7)
STM32C092CBT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_ETR and TIM1_BKIN and additional functions RTC_TS, RTC_OUT1 and WKUP2. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) that serves as the LSE oscillator input (OSCX_IN), with alternate functions such as USART1_TX, I2C1_SDA and FDCAN1_TX. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant I/O (FT) that serves as the LSE oscillator output (OSCX_OUT), with alternate functions OSC32_EN, OSC_EN, TIM1_ETR, TIM3_CH3 and TIM15_BKIN. |
| 4 | PF3 | bidirectional | 5 V-tolerant general-purpose I/O (FT) with no alternate function listed. |
| 5 | VREF+ | power_in | Analog reference voltage input for the ADC, with VREF+ between 2 V and VDD. |
| 6 | VDD/VDDA | power_in | Digital and analog supply for the device (VDD = VDDA = VDDIO1), 2.0 V to 3.6 V. |
| 7 | VSS/VSSA | power_in | Ground for the digital and analog supplies. |
| 8 | PF0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT) that serves as the HSE 4 to 48 MHz oscillator input (OSC_IN), with alternate function TIM14_CH1. |
| 9 | PF1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT) that serves as the HSE oscillator output (OSC_OUT), with alternate functions OSC_EN and TIM15_CH1N. |
| 10 | PF2-NRST | bidirectional | Active-low reset pin with embedded weak pull-up (25 to 55 kΩ), usable as a GPIO (FT) with alternate functions MCO and TIM1_CH4. |
| 11 | PA0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN0 and WKUP1 and alternate functions such as SPI2_SCK, USART2_CTS, TIM2_CH1 and USART1_TX. |
| 12 | PA1 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN1 and alternate functions such as SPI1_SCK/I2S1_CK, USART1_RX and TIM2_CH2. |
| 13 | PA2 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN2, WKUP4 and LSCO and alternate functions such as SPI1_MOSI/I2S1_SD and USART2_TX. |
| 14 | PA3 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN3 and alternate functions such as SPI2_MISO and USART2_RX. |
| 15 | PA4 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN4 and RTC_OUT2 and alternate functions such as SPI1_NSS/I2S1_WS and USART2_TX. |
| 16 | PA5 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN5 and alternate functions such as SPI1_SCK/I2S1_CK and USART2_RX. |
| 17 | PA6 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN6 and alternate functions such as SPI1_MISO/I2S1_MCK, TIM3_CH1 and I2C2_SDA. |
| 18 | PA7 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN7 and alternate functions such as SPI1_MOSI/I2S1_SD, TIM3_CH2 and I2C2_SCL. |
| 19 | PB0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN17 and alternate functions such as SPI1_NSS/I2S1_WS, TIM3_CH3, FDCAN1_RX and USART3_RX. |
| 20 | PB1 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN18 and alternate functions such as TIM14_CH1, TIM3_CH4, FDCAN1_TX and USART3_RTS/DE/CK. |
| 21 | PB2 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN19 and alternate functions USART1_RX, MCO2, SPI2_MISO and USART3_TX. |
| 22 | PB10 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN20 and alternate functions TIM2_CH3, USART3_TX, SPI2_SCK and I2C2_SCL. |
| 23 | PB11 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN21 and alternate functions SPI2_MOSI, TIM2_CH4, USART3_RX and I2C2_SDA. |
| 24 | PB12 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN22 and alternate functions SPI2_NSS, TIM1_BKIN2, TIM1_BKIN, FDCAN1_RX and TIM15_BKIN. |
| 25 | PB13 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with alternate functions SPI2_SCK, TIM1_CH1N, FDCAN1_TX, USART3_CTS/NSS and I2C2_SCL. |
| 26 | PB14 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS/DE/CK, TIM15_CH1 and I2C2_SDA. |
| 27 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with additional function RTC_REFIN and alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2. |
| 28 | PA8 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN8 and alternate functions such as MCO, USART2_TX, TIM1_CH1, SPI2_NSS and MCO2. |
| 29 | PA9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as MCO, USART1_TX, TIM1_CH2, I2C1_SCL and I2C2_SCL; PA9 and PA10 can be remapped in place of PA11 and PA12 via SYSCFG_CFGR1. |
| 30 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH1 and TIM2_CH3. |
| 31 | PC7 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH2 and TIM2_CH4. |
| 32 | PA10 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI2_MOSI, USART1_RX, TIM1_CH3, I2C1_SDA and I2C2_SDA; can be remapped in place of PA12 via SYSCFG_CFGR1. |
| 33 | PA11 [PA9] | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MISO/I2S1_MCK, USART1_CTS/NSS, TIM1_CH4, FDCAN1_RX and I2C2_SCL; can be remapped to PA9. |
| 34 | PA12 [PA10] | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MOSI/I2S1_SD, USART1_RTS/DE/CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN and I2C2_SDA; can be remapped to PA10. |
| 35 | PA13 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a) that is SWDIO at reset with internal pull-up active, with additional function ADC_IN13 and alternate functions IR_OUT, TIM3_ETR and USART2_RX. |
| 36 | PA14-BOOT0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a) that is SWCLK at reset with internal pull-down active, also serving as BOOT0, with additional function ADC_IN14. |
| 37 | PA15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions such as SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, TIM2_CH1/ETR and USART4_RTS/DE/CK. |
| 38 | PD0 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions EVENTOUT, TIM16_CH1, SPI2_NSS and FDCAN1_RX. |
| 39 | PD1 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions EVENTOUT, TIM17_CH1, SPI2_SCK and FDCAN1_TX. |
| 40 | PD2 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART3_RTS/DE/CK, TIM3_ETR and TIM1_CH1N. |
| 41 | PD3 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART2_CTS/NSS, TIM1_CH2N and SPI2_MISO. |
| 42 | PB3 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS/DE/CK and I2C2_SCL. |
| 43 | PB4 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS/NSS, TIM17_BKIN and I2C2_SDA. |
| 44 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with additional function WKUP6 and alternate functions such as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN1_RX and I2C1_SMBA. |
| 45 | PB6 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with additional function WKUP3 and alternate functions such as USART1_TX, TIM1_CH3, I2C1_SCL, I2C1_SMBA and FDCAN1_TX. |
| 46 | PB7 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as USART1_RX, TIM1_CH4, SPI2_MOSI, USART4_CTS/NSS and I2C1_SDA. |
| 47 | PB8 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as USART3_TX, USART2_CTS/NSS, TIM16_CH1, SPI2_SCK, I2C1_SCL and FDCAN1_RX. |
| 48 | PB9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as IR_OUT, USART2_RTS/DE/CK, TIM17_CH1, USART3_RX, SPI2_NSS, I2C1_SDA and FDCAN1_TX. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | -0.3 | 4 | V | 47 | ||
| Voltage on VREF+ pin | VREF+ | -0.3 | V | 47 | |||
| Input voltage on pin | VIN | -0.3 | V | 47 | |||
| Current into VDD/VDDA power pin | IVDD/VDDA | 100 | mA | 47 | |||
| Current out of VSS/VSSA ground pin | IVSS/VSSA | 100 | mA | 47 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | 47 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 47 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 47 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 47 | |||
| Injected current on FT pin | IINJ(PIN) | -5 | mA | 47 | |||
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | mA | 47 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 47 | ||
| Maximum junction temperature | TJ | 130 | °C | 47 | |||
| Standard operating voltage | VDD | 2 | 3.6 | V | 48 | ||
| I/O input voltage | VIN | -0.3 | V | 48 | |||
| AHB clock frequency | fHCLK | 48 | MHz | 48 | |||
| APB clock frequency | fPCLK | 48 | MHz | 48 | |||
| Ambient temperature (suffix 6) | TA | -40 | 85 | °C | Suffix 6 | 48 | |
| Junction temperature (suffix 6) | TJ | -40 | 105 | °C | Suffix 6 | 48 | |
| VDD rise time rate | tVDD | 0 | µs/V | 48 | |||
| VDD fall time rate | tVDD | 10 | µs/V | 48 | |||
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 270 | 500 | µs | VDD rising | 48 | |
| Power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | 48 | |
| Power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | 49 | |
| Brownout reset threshold 1 (rising) | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 49 |
| Brownout reset threshold 1 (falling) | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 49 |
| Brownout reset threshold 2 (rising) | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 49 |
| Brownout reset threshold 2 (falling) | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 49 |
| Brownout reset threshold 3 (rising) | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 49 |
| Brownout reset threshold 3 (falling) | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 49 |
| Brownout reset threshold 4 (rising) | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 49 |
| Brownout reset threshold 4 (falling) | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 49 |
| ESD voltage, human body model | VESD(HBM) | 2000 | V | TA = +25 °C, ANSI/ESDA/JEDEC JS-001 class 2 | 71 | ||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | 49 | |
| ADC sampling time when reading internal reference voltage | tS_vrefint | 4 | µs | 49 | |||
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | 8 | 12 | µs | 49 | ||
| Average temperature coefficient of VREFINT | TCoeff | 20 | 70 | ppm/°C | 49 | ||
| Voltage coefficient of VREFINT | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 49 | |
| Long term stability of VREFINT | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 49 | |
| HSE oscillator frequency | fOSC_IN | 4 | 48 | MHz | 64 | ||
| HSI48 frequency | fHSI48 | 47.92 | 48.4 | MHz | VDD=3.0 V, TA=30 °C | 66 | |
| HSI48 oscillator frequency drift over temperature and VDD | ∆Temp(HSI) | -1 | 1 | % | TA = 0 to 85 °C | 66 | |
| HSI48 duty cycle | DHSI48 | 45 | 55 | % | 66 | ||
| HSI48 oscillator stabilization time | tstab(HSI48) | 1.5 | 3.6 | µs | at 1% of target frequency | 66 | |
| HSI48 oscillator power consumption | IDD(HSI48) | 525 | 570 | µA | 66 | ||
| LSI frequency | fLSI | 31.04 | 32 | 32.96 | kHz | VDD = 3.3 V, TA = 25 °C | 67 |
| Flash memory endurance | NEND | 10 | kcycles | TJ = -40 to +130 °C | 68 | ||
| Weak pull-up equivalent resistor (I/O) | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 72 |
| Weak pull-down equivalent resistor (I/O) | RPD | 25 | 40 | 55 | kΩ | VIN = VDDIO1 | 72 |
| Input leakage current (I/O) | Ilkg | -70 | 70 | nA | 0 < VIN ≤ VDDIO1 | 72 | |
| NRST weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 76 |
| NRST input filtered pulse | VF(NRST) | 70 | ns | 2.0 V < VDD < 3.6 V | 76 | ||
| NRST input not filtered pulse | VNF(NRST) | 350 | ns | 2.0 V < VDD < 3.6 V | 76 | ||
| Analog supply voltage | VDDA | 2 | 3.6 | V | 77 | ||
| ADC total unadjusted error | ET | -6.5 | 6.5 | LSB | 2 V < VDDA = VREF+ < 3.6 V, fADC = 35 MHz, fs ≤ 2.5 Msps, TA = entire range | 80 | |
| Supply current in Run mode from flash | IDD(Run) | 3.7 | 4.04 | mA | fHCLK 48 MHz, flash memory, TA = 85 °C | 51 | |
| Supply current in Sleep mode | IDD(Sleep) | 0.845 | 1.27 | mA | fHCLK 48 MHz, flash enabled, all peripherals disabled, TA = 85 °C | 55 | |
| Supply current in Stop mode | IDD(Stop) | 175 | 360 | µA | All clocks off, VDD = 3.6 V, TA = 85 °C | 57 | |
| Supply current in Standby mode | IDD(Standby) | 9.6 | 11.7 | µA | All clocks off, VDD = 3.6 V, TA = 85 °C | 58 | |
| Supply current in Shutdown mode | IDD(Shutdown) | 770 | 1600 | nA | All clocks off, VDD = 3.0 V, TA = 85 °C | 58 |
CAD (KiCad official)
- Symbol:
STM32C092CBT6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32c092cbt6-etched.step/stm32c092cbt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32c092cbt6.step/stm32c092cbt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (124 pp, sha256
1be32e8366076646, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32C092CBT6
**STMicroelectronics** · IC · LQFP-48(7x7)
STM32C092CBT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM1_ETR and TIM1_BKIN and additional functions RTC_TS, RTC_OUT1 and WKUP2. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) that serves as the LSE oscillator input (OSCX_IN), with alternate functions such as USART1_TX, I2C1_SDA and FDCAN1_TX. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant I/O (FT) that serves as the LSE oscillator output (OSCX_OUT), with alternate functions OSC32_EN, OSC_EN, TIM1_ETR, TIM3_CH3 and TIM15_BKIN. |
| 4 | PF3 | bidirectional | 5 V-tolerant general-purpose I/O (FT) with no alternate function listed. |
| 5 | VREF+ | power_in | Analog reference voltage input for the ADC, with VREF+ between 2 V and VDD. |
| 6 | VDD/VDDA | power_in | Digital and analog supply for the device (VDD = VDDA = VDDIO1), 2.0 V to 3.6 V. |
| 7 | VSS/VSSA | power_in | Ground for the digital and analog supplies. |
| 8 | PF0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT) that serves as the HSE 4 to 48 MHz oscillator input (OSC_IN), with alternate function TIM14_CH1. |
| 9 | PF1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT) that serves as the HSE oscillator output (OSC_OUT), with alternate functions OSC_EN and TIM15_CH1N. |
| 10 | PF2-NRST | bidirectional | Active-low reset pin with embedded weak pull-up (25 to 55 kΩ), usable as a GPIO (FT) with alternate functions MCO and TIM1_CH4. |
| 11 | PA0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN0 and WKUP1 and alternate functions such as SPI2_SCK, USART2_CTS, TIM2_CH1 and USART1_TX. |
| 12 | PA1 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN1 and alternate functions such as SPI1_SCK/I2S1_CK, USART1_RX and TIM2_CH2. |
| 13 | PA2 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN2, WKUP4 and LSCO and alternate functions such as SPI1_MOSI/I2S1_SD and USART2_TX. |
| 14 | PA3 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN3 and alternate functions such as SPI2_MISO and USART2_RX. |
| 15 | PA4 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional functions ADC_IN4 and RTC_OUT2 and alternate functions such as SPI1_NSS/I2S1_WS and USART2_TX. |
| 16 | PA5 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN5 and alternate functions such as SPI1_SCK/I2S1_CK and USART2_RX. |
| 17 | PA6 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN6 and alternate functions such as SPI1_MISO/I2S1_MCK, TIM3_CH1 and I2C2_SDA. |
| 18 | PA7 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN7 and alternate functions such as SPI1_MOSI/I2S1_SD, TIM3_CH2 and I2C2_SCL. |
| 19 | PB0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN17 and alternate functions such as SPI1_NSS/I2S1_WS, TIM3_CH3, FDCAN1_RX and USART3_RX. |
| 20 | PB1 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN18 and alternate functions such as TIM14_CH1, TIM3_CH4, FDCAN1_TX and USART3_RTS/DE/CK. |
| 21 | PB2 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN19 and alternate functions USART1_RX, MCO2, SPI2_MISO and USART3_TX. |
| 22 | PB10 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN20 and alternate functions TIM2_CH3, USART3_TX, SPI2_SCK and I2C2_SCL. |
| 23 | PB11 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with additional function ADC_IN21 and alternate functions SPI2_MOSI, TIM2_CH4, USART3_RX and I2C2_SDA. |
| 24 | PB12 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN22 and alternate functions SPI2_NSS, TIM1_BKIN2, TIM1_BKIN, FDCAN1_RX and TIM15_BKIN. |
| 25 | PB13 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with alternate functions SPI2_SCK, TIM1_CH1N, FDCAN1_TX, USART3_CTS/NSS and I2C2_SCL. |
| 26 | PB14 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa), with alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS/DE/CK, TIM15_CH1 and I2C2_SDA. |
| 27 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with additional function RTC_REFIN and alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2. |
| 28 | PA8 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a), with additional function ADC_IN8 and alternate functions such as MCO, USART2_TX, TIM1_CH1, SPI2_NSS and MCO2. |
| 29 | PA9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as MCO, USART1_TX, TIM1_CH2, I2C1_SCL and I2C2_SCL; PA9 and PA10 can be remapped in place of PA11 and PA12 via SYSCFG_CFGR1. |
| 30 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH1 and TIM2_CH3. |
| 31 | PC7 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions TIM3_CH2 and TIM2_CH4. |
| 32 | PA10 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI2_MOSI, USART1_RX, TIM1_CH3, I2C1_SDA and I2C2_SDA; can be remapped in place of PA12 via SYSCFG_CFGR1. |
| 33 | PA11 [PA9] | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MISO/I2S1_MCK, USART1_CTS/NSS, TIM1_CH4, FDCAN1_RX and I2C2_SCL; can be remapped to PA9. |
| 34 | PA12 [PA10] | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MOSI/I2S1_SD, USART1_RTS/DE/CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN and I2C2_SDA; can be remapped to PA10. |
| 35 | PA13 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a) that is SWDIO at reset with internal pull-up active, with additional function ADC_IN13 and alternate functions IR_OUT, TIM3_ETR and USART2_RX. |
| 36 | PA14-BOOT0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a) that is SWCLK at reset with internal pull-down active, also serving as BOOT0, with additional function ADC_IN14. |
| 37 | PA15 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions such as SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, TIM2_CH1/ETR and USART4_RTS/DE/CK. |
| 38 | PD0 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions EVENTOUT, TIM16_CH1, SPI2_NSS and FDCAN1_RX. |
| 39 | PD1 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions EVENTOUT, TIM17_CH1, SPI2_SCK and FDCAN1_TX. |
| 40 | PD2 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART3_RTS/DE/CK, TIM3_ETR and TIM1_CH1N. |
| 41 | PD3 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions USART2_CTS/NSS, TIM1_CH2N and SPI2_MISO. |
| 42 | PB3 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS/DE/CK and I2C2_SCL. |
| 43 | PB4 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS/NSS, TIM17_BKIN and I2C2_SDA. |
| 44 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with additional function WKUP6 and alternate functions such as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN1_RX and I2C1_SMBA. |
| 45 | PB6 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with additional function WKUP3 and alternate functions such as USART1_TX, TIM1_CH3, I2C1_SCL, I2C1_SMBA and FDCAN1_TX. |
| 46 | PB7 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as USART1_RX, TIM1_CH4, SPI2_MOSI, USART4_CTS/NSS and I2C1_SDA. |
| 47 | PB8 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as USART3_TX, USART2_CTS/NSS, TIM16_CH1, SPI2_SCK, I2C1_SCL and FDCAN1_RX. |
| 48 | PB9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions such as IR_OUT, USART2_RTS/DE/CK, TIM17_CH1, USART3_RX, SPI2_NSS, I2C1_SDA and FDCAN1_TX. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | -0.3 | | 4 | V | | 47 |
| Voltage on VREF+ pin | VREF+ | -0.3 | | | V | | 47 |
| Input voltage on pin | VIN | -0.3 | | | V | | 47 |
| Current into VDD/VDDA power pin | IVDD/VDDA | | | 100 | mA | | 47 |
| Current out of VSS/VSSA ground pin | IVSS/VSSA | | | 100 | mA | | 47 |
| Output current sunk by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 47 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 47 |
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | | | 80 | mA | | 47 |
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | | | 80 | mA | | 47 |
| Injected current on FT pin | IINJ(PIN) | -5 | | | mA | | 47 |
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | | | mA | | 47 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 47 |
| Maximum junction temperature | TJ | | | 130 | °C | | 47 |
| Standard operating voltage | VDD | 2 | | 3.6 | V | | 48 |
| I/O input voltage | VIN | -0.3 | | | V | | 48 |
| AHB clock frequency | fHCLK | | | 48 | MHz | | 48 |
| APB clock frequency | fPCLK | | | 48 | MHz | | 48 |
| Ambient temperature (suffix 6) | TA | -40 | | 85 | °C | Suffix 6 | 48 |
| Junction temperature (suffix 6) | TJ | -40 | | 105 | °C | Suffix 6 | 48 |
| VDD rise time rate | tVDD | 0 | | | µs/V | | 48 |
| VDD fall time rate | tVDD | 10 | | | µs/V | | 48 |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | | 270 | 500 | µs | VDD rising | 48 |
| Power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | | 48 |
| Power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | | 49 |
| Brownout reset threshold 1 (rising) | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 49 |
| Brownout reset threshold 1 (falling) | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 49 |
| Brownout reset threshold 2 (rising) | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 49 |
| Brownout reset threshold 2 (falling) | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 49 |
| Brownout reset threshold 3 (rising) | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 49 |
| Brownout reset threshold 3 (falling) | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 49 |
| Brownout reset threshold 4 (rising) | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 49 |
| Brownout reset threshold 4 (falling) | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 49 |
| ESD voltage, human body model | VESD(HBM) | | | 2000 | V | TA = +25 °C, ANSI/ESDA/JEDEC JS-001 class 2 | 71 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | | 49 |
| ADC sampling time when reading internal reference voltage | tS_vrefint | 4 | | | µs | | 49 |
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | | 8 | 12 | µs | | 49 |
| Average temperature coefficient of VREFINT | TCoeff | | 20 | 70 | ppm/°C | | 49 |
| Voltage coefficient of VREFINT | VDDCoeff | | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 49 |
| Long term stability of VREFINT | ACoeff | | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 49 |
| HSE oscillator frequency | fOSC_IN | 4 | | 48 | MHz | | 64 |
| HSI48 frequency | fHSI48 | 47.92 | | 48.4 | MHz | VDD=3.0 V, TA=30 °C | 66 |
| HSI48 oscillator frequency drift over temperature and VDD | ∆Temp(HSI) | -1 | | 1 | % | TA = 0 to 85 °C | 66 |
| HSI48 duty cycle | DHSI48 | 45 | | 55 | % | | 66 |
| HSI48 oscillator stabilization time | tstab(HSI48) | | 1.5 | 3.6 | µs | at 1% of target frequency | 66 |
| HSI48 oscillator power consumption | IDD(HSI48) | | 525 | 570 | µA | | 66 |
| LSI frequency | fLSI | 31.04 | 32 | 32.96 | kHz | VDD = 3.3 V, TA = 25 °C | 67 |
| Flash memory endurance | NEND | 10 | | | kcycles | TJ = -40 to +130 °C | 68 |
| Weak pull-up equivalent resistor (I/O) | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 72 |
| Weak pull-down equivalent resistor (I/O) | RPD | 25 | 40 | 55 | kΩ | VIN = VDDIO1 | 72 |
| Input leakage current (I/O) | Ilkg | -70 | | 70 | nA | 0 < VIN ≤ VDDIO1 | 72 |
| NRST weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 76 |
| NRST input filtered pulse | VF(NRST) | | | 70 | ns | 2.0 V < VDD < 3.6 V | 76 |
| NRST input not filtered pulse | VNF(NRST) | 350 | | | ns | 2.0 V < VDD < 3.6 V | 76 |
| Analog supply voltage | VDDA | 2 | | 3.6 | V | | 77 |
| ADC total unadjusted error | ET | -6.5 | | 6.5 | LSB | 2 V < VDDA = VREF+ < 3.6 V, fADC = 35 MHz, fs ≤ 2.5 Msps, TA = entire range | 80 |
| Supply current in Run mode from flash | IDD(Run) | | 3.7 | 4.04 | mA | fHCLK 48 MHz, flash memory, TA = 85 °C | 51 |
| Supply current in Sleep mode | IDD(Sleep) | | 0.845 | 1.27 | mA | fHCLK 48 MHz, flash enabled, all peripherals disabled, TA = 85 °C | 55 |
| Supply current in Stop mode | IDD(Stop) | | 175 | 360 | µA | All clocks off, VDD = 3.6 V, TA = 85 °C | 57 |
| Supply current in Standby mode | IDD(Standby) | | 9.6 | 11.7 | µA | All clocks off, VDD = 3.6 V, TA = 85 °C | 58 |
| Supply current in Shutdown mode | IDD(Shutdown) | | 770 | 1600 | nA | All clocks off, VDD = 3.0 V, TA = 85 °C | 58 |
## CAD (KiCad official)
- Symbol: `STM32C092CBT6`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32c092cbt6-etched.step` / `stm32c092cbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32c092cbt6.step` / `stm32c092cbt6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32c091cc.pdf) (124 pp, sha256 `1be32e8366076646`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32c092cbt6-datasheet.pdf)