component
STM32C071K8T6
Public Made by Adomby adom
STMicroelectronics , LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32C071K8T6
STMicroelectronics · IC · LQFP-32(7x7)
STM32C071K8T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions IR_OUT, USART2_RTS/USART2_DE/USART2_CK, TIM17_CH1, TIM3_CH2, SPI2_NSS, I2C1_SDA and EVENTOUT. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) that also serves as the OSCX_IN crystal oscillator input, with alternate functions including USART1_TX, TIM1_ETR and I2C1_SDA. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant I/O (FT) that also serves as the OSCX_OUT crystal oscillator output, with additional functions OSC32_EN, OSC_EN, TIM1_ETR and TIM3_CH3. |
| 4 | VDD/VDDA | power_in | Standard operating voltage pin for VDD and analog VDDA supply, with a standard operating voltage range of 2.0 V to 3.6 V. |
| 5 | VSS/VSSA | power_in | Ground pin for digital (VSS) and analog (VSSA) circuitry, to which all voltages on the device are referenced. |
| 6 | PF2-NRST | bidirectional | Reset pin (RST structure) with embedded weak pull-up resistor, which becomes a 5 V-tolerant GPIO (FT) when configured as PF2 and has alternate functions MCO and TIM1_CH4. |
| 7 | PA0 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN0 and wake-up function WKUP1, plus alternate functions SPI2_SCK, TIM16_CH1, TIM2_CH1, USART1_TX and TIM1_CH1. |
| 8 | PA1 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN1, plus alternate functions SPI1_SCK/I2S1_CK, USART2_RTS/USART2_DE/USART2_CK, TIM17_CH1, TIM2_CH2 and USART1_RX. |
| 9 | PA2 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN2, wake-up function WKUP4 and LSCO output, plus alternate functions SPI1_MOSI/I2S1_SD, USART2_TX and TIM16_CH1N. |
| 10 | PA3 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN3, plus alternate functions SPI2_MISO, USART2_RX, TIM1_CH1N, TIM2_CH4 and EVENTOUT. |
| 11 | PA4 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN4, RTC_TS, RTC_OUT1 and wake-up function WKUP2, plus alternate functions SPI1_NSS/I2S1_WS, USART2_TX, SPI2_MOSI, TIM14_CH1 and USB_NOE. |
| 12 | PA5 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN5, plus alternate functions SPI1_SCK/I2S1_CK, USART2_RX, TIM1_CH3N, TIM2_CH1 and TIM1_CH1. |
| 13 | PA6 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa) and ADC input ADC_IN6, plus alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1 and I2C2_SDA. |
| 14 | PA7 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa) and ADC input ADC_IN7, plus alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1 and I2C2_SCL. |
| 15 | PB0 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN17, plus alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3 and TIM1_CH2N. |
| 16 | PB1 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN18, plus alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM1_CH2N and EVENTOUT. |
| 17 | PB2 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with ADC input ADC_IN19, plus alternate functions USART1_RX, MCO2, SPI2_MISO and EVENTOUT. |
| 18 | PA8 | bidirectional | 5 V-tolerant analog-switch I/O (FT_sa) supplied by VDDIO2 (internally tied to VDD on GP packages), with ADC input ADC_IN8, plus alternate functions MCO, USART2_TX, TIM1_CH1, SPI2_NSS and CRS_SYNC. |
| 19 | PA9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_sf) supplied by VDDIO2 that can be remapped in place of PA11 using SYSCFG_CFGR1, with alternate functions MCO, USART1_TX, TIM1_CH2, I2C1_SCL and I2C2_SCL. |
| 20 | PC6 | bidirectional | 5 V-tolerant I/O (FT_s) supplied by VDDIO2, with alternate functions TIM3_CH1 and TIM2_CH3. |
| 21 | PA10 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_sf) supplied by VDDIO2 that can be remapped in place of PA12 using SYSCFG_CFGR1, with alternate functions SPI2_MOSI, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA and I2C2_SDA. |
| 22 | PA11 [PA9] | bidirectional | 5 V-tolerant Fm+-capable USB-capable I/O (FT_usf) supplied by VDDIO2 with USB_DM function, default mapping of PA11 (PA9 when remapped), and alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS/USART1_NSS, TIM1_CH4, TIM1_BKIN2 and I2C2_SCL. |
| 23 | PA12 [PA10] | bidirectional | 5 V-tolerant Fm+-capable USB-capable I/O (FT_usf) supplied by VDDIO2 with USB_DP function, default mapping of PA12 (PA10 when remapped), and alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS/USART1_DE/USART1_CK, TIM1_ETR, I2S_CKIN and I2C2_SDA. |
| 24 | PA13 | bidirectional | 5 V-tolerant analog-switch I/O (FT_sa) supplied by VDDIO2 that is configured as the SWDIO alternate function at reset, with an internal pull-up activated, and ADC input ADC_IN13. |
| 25 | PA14-BOOT0 | bidirectional | 5 V-tolerant analog-switch I/O (FT_sa) supplied by VDDIO2 that is configured as SWCLK at reset with an internal pull-down activated, and also serves as BOOT0 with ADC input ADC_IN14. |
| 26 | PA15 | bidirectional | 5 V-tolerant I/O (FT_s) supplied by VDDIO2, with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, TIM2_CH1 and USB_NOE. |
| 27 | PB3 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS/USART1_DE/USART1_CK, I2C2_SCL, TIM2_CH2 and EVENTOUT. |
| 28 | PB4 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS/USART1_NSS, TIM17_BKIN, I2C2_SDA and EVENTOUT. |
| 29 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with wake-up function WKUP6, plus alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, TIM3_CH3 and I2C1_SMBA. |
| 30 | PB6 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with wake-up function WKUP3, plus alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, TIM3_CH3, SPI2_MISO, I2C1_SCL and I2C1_SMBA. |
| 31 | PB7 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions USART1_RX, TIM1_CH4, TIM17_CH1N, TIM3_CH4, SPI2_MOSI, I2C1_SDA, EVENTOUT, USART2_CTS/USART2_NSS, TIM16_CH1, TIM3_CH1 and I2C1_SCL. |
| 32 | PB8 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f) with alternate functions USART2_CTS/USART2_NSS, TIM16_CH1, TIM3_CH1, SPI2_SCK, I2C1_SCL and EVENTOUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | 4 | V | 51 | ||
| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | 100 | mA | 51 | |||
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | 100 | mA | 51 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | 51 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 51 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 51 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 51 | |||
| Injected current on FT_xx pin (negative injection) | IINJ(PIN) | -5 | mA | Negative injection; positive injection printed as NA | 52 | ||
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | mA | 52 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 52 | ||
| Maximum junction temperature | TJ | 130 | °C | 52 | |||
| Standard operating voltage | VDD | 2 | 3.6 | V | 53 | ||
| Ambient temperature, suffix 6 | TA | -40 | 85 | °C | Suffix 6 (temperature range digit in order code) | 53 | |
| Junction temperature, suffix 6 | TJ | -40 | 105 | °C | Suffix 6 (temperature range digit in order code) | 53 | |
| AHB clock frequency | fHCLK | 48 | MHz | 53 | |||
| APB clock frequency | fPCLK | 48 | MHz | 53 | |||
| VDD rise time rate | tVDD | 0 | µs/V | 53 | |||
| VDD fall time rate | tVDD | 10 | µs/V | 53 | |||
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 270 | 500 | µs | VDD rising | 54 | |
| Power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | 54 | |
| Power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | 54 | |
| Brownout reset threshold 1, VDD rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 54 |
| Brownout reset threshold 1, VDD falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 54 |
| Brownout reset threshold 2, VDD rising | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 54 |
| Brownout reset threshold 2, VDD falling | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 54 |
| Brownout reset threshold 3, VDD rising | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 54 |
| Brownout reset threshold 3, VDD falling | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 54 |
| Brownout reset threshold 4, VDD rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 54 |
| Brownout reset threshold 4, VDD falling | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 54 |
| BOR consumption from VDD | IDD(BOR) | 2.2 | 2.5 | µA | 54 | ||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | 54 | |
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | 54 | |||
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | 8 | 12 | µs | 54 | ||
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 13.5 | 23 | µA | 54 | ||
| Internal reference voltage spread over the temperature range | ΔVREFINT | 30 | 50 | mV | VDD = 3 V | 54 | |
| Average temperature coefficient | TCoeff | 20 | 70 | ppm/°C | 54 | ||
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 54 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 54 | |
| Supply current in Run mode, code in flash, 25 °C | IDD(Run) | 3.7 | 4 | mA | fHCLK = 48 MHz (HSE bypass), flash; all peripherals disabled | 56 | |
| Supply current in Run mode, code in flash, 85 °C | IDD(Run) | 3.85 | 4.2 | mA | fHCLK = 48 MHz (HSE bypass), flash; all peripherals disabled | 56 | |
| Supply current in Run mode, code in flash, 125 °C | IDD(Run) | 4.2 | 5 | mA | fHCLK = 48 MHz (HSE bypass), flash; all peripherals disabled | 56 | |
| Supply current in Run mode, code in SRAM, 25 °C | IDD(Run) | 3.1 | 3.4 | mA | fHCLK = 48 MHz (HSE bypass), SRAM; all peripherals disabled | 57 | |
| Supply current in Run mode, code in SRAM, 125 °C | IDD(Run) | 3.55 | 4.3 | mA | fHCLK = 48 MHz (HSE bypass), SRAM; all peripherals disabled | 57 | |
| Supply current in Sleep mode, flash enabled, 25 °C | IDD(Sleep) | 0.77 | 0.97 | mA | fHCLK = 48 MHz (HSE bypass); all peripherals disabled | 61 | |
| Supply current in Sleep mode, flash enabled, 125 °C | IDD(Sleep) | 1.2 | 2.1 | mA | fHCLK = 48 MHz (HSE bypass); all peripherals disabled | 61 | |
| Supply current in Stop mode, 25 °C | IDD(Stop) | 87.5 | 120 | µA | All clocks off, VDD = 3.6 V | 63 | |
| Supply current in Stop mode, 85 °C | IDD(Stop) | 175 | 360 | µA | All clocks off, VDD = 3.6 V | 63 | |
| Supply current in Standby mode, 25 °C | IDD(Standby) | 7.75 | 9.5 | µA | All clocks off, VDD = 3.6 V | 64 | |
| Supply current in Standby mode, 85 °C | IDD(Standby) | 9.5 | 11.6 | µA | All clocks off, VDD = 3.6 V | 64 | |
| Supply current in Shutdown mode, 25 °C | IDD(Shutdown) | 41 | 130 | nA | All clocks off, VDD = 3.6 V | 64 | |
| Supply current in Shutdown mode, 85 °C | IDD(Shutdown) | 1000 | 1900 | nA | All clocks off, VDD = 3.6 V | 64 | |
| HSI48 frequency | fHSI48 | 47.92 | 48.4 | MHz | VDD = 3.0 V, TA = 30 °C | 72 | |
| Input leakage current, FT pins | Ilkg | -70 | 70 | nA | 0 < VIN ≤ VDDIOx | 79 | |
| NRST weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 83 |
| Output low level voltage, CMOS port | VOL | 0.4 | V | CMOS port, /IIO/ = 8 mA, VDDIOx ≥ 2.7 V | 81 | ||
| Output low level voltage, all I/Os | VOL | 1.3 | V | /IIO/ = 20 mA, VDDIOx ≥ 2.7 V | 81 | ||
| Word programming time | tprog | 85 | 125 | µs | 64 bits | 75 | |
| Endurance | NEND | 10 | kcycles | TJ = -40 to +130 °C | 75 | ||
| HSIUSB48 accuracy over temperature (factory calibrated) | ACCHSIUSB48_REL | -3 | 3 | % | VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C | 73 | |
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 2 V to 3.6 V, TA = -40 to 125 °C | 74 |
CAD (KiCad official)
- Symbol:
STM32C071K8T6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32c071k8t6-etched.step/stm32c071k8t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32c071k8t6.step/stm32c071k8t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (131 pp, sha256
143ef3551f99ae75, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).