main
Ray
Publish 0.1.0
f83bc13
STM32C071F8P6
STMicroelectronics · IC · TSSOP-20
STM32C071F8P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB7/PB8 | bidirectional | Fm+ capable FT_f I/O shared between PB7 and PB8, with alternate functions including USART1_RX, TIM1_CH4, I2C1_SDA, I2C1_SCL and TIM16_CH1. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant FT_f I/O that doubles as the OSCX_IN 32 kHz crystal input, with alternate functions including USART1_TX, TIM1_ETR and I2C1_SDA. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant FT I/O that doubles as the OSCX_OUT 32 kHz crystal output, with alternate functions OSC32_EN, OSC_EN, TIM1_ETR and TIM3_CH3. |
| 4 | VDD/VDDA | power_in | Main supply pin, with a standard operating voltage of 2.0 V to 3.6 V, also serving as the analog supply VDDA. |
| 5 | VSS/VSSA | power_in | Ground pin serving as the digital and analog 0 V reference for the device. |
| 6 | PF2-NRST | bidirectional | Reset pin with an embedded weak pull-up (RST I/O structure) when configured as reset, and an FT I/O when configured as GPIO, with alternate functions MCO and TIM1_CH4. |
| 7 | PA0 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN0 and wake-up input WKUP1. |
| 8 | PA1 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN1. |
| 9 | PA2 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN2, WKUP4 wake-up input and LSCO output. |
| 10 | PA3 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN3. |
| 11 | PA4 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN4 and RTC_OUT2, with alternate functions including SPI1_NSS, SPI2_MOSI and USB_NOE. |
| 12 | PA5 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN5, with alternate functions including SPI1_SCK and USART2_RX. |
| 13 | PA6 | bidirectional | 5 V-tolerant FT_fa I/O, Fm+ capable with analog switch function, serving as ADC input ADC_IN6, with alternate functions including SPI1_MISO and I2C2_SDA. |
| 14 | PA7 | bidirectional | 5 V-tolerant FT_fa I/O, Fm+ capable with analog switch function, serving as ADC input ADC_IN7, with alternate functions including SPI1_MOSI and I2C2_SCL. |
| 15 | PA8 | bidirectional | 5 V-tolerant FT_sa I/O supplied by VDDIO2 (internally tied to VDD on the GP package), serving as ADC input ADC_IN8 and MCO output. |
| 16 | PA11 [PA9] | bidirectional | 5 V-tolerant FT_usf I/O with USB function USB_DM, default mapping of which can be remapped to PA9 through SYSCFG_CFGR1. |
| 17 | PA12 [PA10] | bidirectional | 5 V-tolerant FT_usf I/O with USB function USB_DP, default mapping of which can be remapped to PA10 through SYSCFG_CFGR1. |
| 18 | PA13 | bidirectional | 5 V-tolerant FT_sa I/O that after reset is the SWDIO function with an internal pull-up, also serving as ADC input ADC_IN13. |
| 19 | PA14-BOOT0/PA15 | bidirectional | 5 V-tolerant FT_sa I/O that after reset is the SWCLK function with an internal pull-down, also serving as ADC input ADC_IN14 and BOOT0 boot-mode pin. |
| 20 | PB3/PB4/PB5/PB6 | bidirectional | Fm+ capable FT_f I/O shared among PB3, PB4, PB5 and PB6, with alternate functions including SPI1_SCK, USART1_TX, TIM1_CH2 and I2C1_SCL, and PB6 also serving as wake-up input WKUP3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-20 |
| Category | |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | 4 | V | 51 | ||
| External supply voltage for selected I/Os | VDDIO2 | -0.3 | 4 | V | 51 | ||
| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | 100 | mA | 51 | |||
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | 100 | mA | 51 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | 51 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 51 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 51 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 51 | |||
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | mA | Injected current on a FT_xx pin; max NA on positive side | 52 | ||
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | mA | 52 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 52 | ||
| Maximum junction temperature | TJ | 130 | °C | 52 | |||
| Standard operating voltage | VDD | 2 | 3.6 | V | 53 | ||
| External supply voltage for selected I/Os | VDDIO2 | 1.65 | 3.6 | V | 53 | ||
| AHB clock frequency | fHCLK | 48 | MHz | 53 | |||
| APB clock frequency | fPCLK | 48 | MHz | 53 | |||
| Ambient temperature, suffix 6 | TA | -40 | 85 | °C | Suffix 6 | 53 | |
| Junction temperature, suffix 6 | TJ | -40 | 105 | °C | Suffix 6 | 53 | |
| POR power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | 54 | |
| PDR power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | 54 | |
| Brownout reset threshold 1, rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 54 |
| Brownout reset threshold 1, falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 54 |
| Brownout reset threshold 2, rising | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 54 |
| Brownout reset threshold 2, falling | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 54 |
| Brownout reset threshold 3, rising | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 54 |
| Brownout reset threshold 3, falling | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 54 |
| Brownout reset threshold 4, rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 54 |
| Brownout reset threshold 4, falling | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 54 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | 54 | |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 30 | 50 | mV | VDD = 3 V | 54 | |
| Average temperature coefficient | TCoeff | 20 | 70 | ppm/°C | 54 | ||
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 54 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 54 | |
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | 54 | |||
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | 8 | 12 | µs | 54 | ||
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 9 | 13.5 | 23 | µA | 54 | |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 270 | 500 | µs | VDD rising | 54 | |
| Supply current in Run mode, fetch from flash, 48 MHz | IDD(Run) | 3.7 | 4 | mA | fHCLK 48 MHz from flash, all peripherals disabled, 25 °C; typ at VDD 3.0 V, max at VDD 3.6 V | 56 | |
| Supply current in Sleep mode, flash enabled, 48 MHz | IDD(Sleep) | 0.77 | 0.97 | mA | All peripherals disabled, fHCLK = fHSE_bypass 48 MHz, flash memory enabled, 25 °C | 61 | |
| Supply current in Stop mode | IDD(Stop) | 85.5 | 120 | µA | All clocks off, VDD = 3 V, 25 °C | 63 | |
| Supply current in Standby mode | IDD(Standby) | 7.35 | 8.4 | µA | All clocks off, VDD = 3 V, 25 °C | 64 | |
| Supply current in Shutdown mode | IDD(Shutdown) | 23 | 91 | nA | All clocks off, VDD = 3.0 V, 25 °C | 64 | |
| Oscillator frequency | fOSC_IN | 4 | 48 | MHz | 70 | ||
| HSI48 frequency | fHSI48 | 47.92 | 48.4 | MHz | VDD = 3.0 V, TA = 30 °C | 72 | |
| HSI48 frequency drift over temperature and VDD full voltage range | ∆Temp(HSI) | -1 | 1 | % | TA = 0 to 85 °C | 72 | |
| HSI48 frequency drift over temperature and VDD full voltage range | ∆Temp(HSI) | -2.5 | 2 | % | TA = -40 to 125 °C | 72 | |
| HSIUSB48 accuracy over temperature, factory calibrated | ACCHSIUSB48_REL | -3 | 3 | % | VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C | 73 | |
| HSIUSB48 accuracy over temperature, factory calibrated | ACCHSIUSB48_REL | -4.5 | 4.5 | % | VDD = 2.0 V to 3.6 V, TA = -40 to 125 °C | 73 | |
| LSI frequency | fLSI | 31.04 | 32 | 32.96 | kHz | VDD = 3.3 V, TA = 25 °C | 74 |
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 2 V to 3.6 V, TA = -40 to 125 °C | 74 | |
| Output low level voltage, CMOS port | VOL | 0.4 | V | /IIO/ = 8 mA, VDDIOx ≥ 2.7 V | 81 | ||
| Output high level voltage, TTL port | VOH | 2.4 | V | TTL port, /IIO/ = 8 mA, VDDIOx ≥ 2.7 V | 81 | ||
| Output low level voltage, all I/Os | VOL | 1.3 | V | /IIO/ = 20 mA, VDDIOx ≥ 2.7 V | 81 | ||
| Weak pull-up equivalent resistor, I/O | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 79 |
| Weak pull-up equivalent resistor, NRST | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 83 |
| NRST input not filtered pulse | VNF(NRST) | 350 | ns | 2.0 V < VDD < 3.6 V | 83 | ||
| NRST input filtered pulse | VF(NRST) | 70 | ns | 2.0 V < VDD < 3.6 V | 83 | ||
| ADC analog supply voltage | VDDA | 2 | 3.6 | V | 84 | ||
| ADC clock frequency | fADC | 0.14 | 35 | MHz | 84 | ||
| External input impedance | RAIN | 50 | kΩ | 84 |
CAD (KiCad official)
- Symbol:
STM32C071F8P6 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
stm32c071f8p6-etched.step/stm32c071f8p6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32c071f8p6.step/stm32c071f8p6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (131 pp, sha256
143ef3551f99ae75, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32C071F8P6
**STMicroelectronics** · IC · TSSOP-20
STM32C071F8P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB7/PB8 | bidirectional | Fm+ capable FT_f I/O shared between PB7 and PB8, with alternate functions including USART1_RX, TIM1_CH4, I2C1_SDA, I2C1_SCL and TIM16_CH1. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant FT_f I/O that doubles as the OSCX_IN 32 kHz crystal input, with alternate functions including USART1_TX, TIM1_ETR and I2C1_SDA. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant FT I/O that doubles as the OSCX_OUT 32 kHz crystal output, with alternate functions OSC32_EN, OSC_EN, TIM1_ETR and TIM3_CH3. |
| 4 | VDD/VDDA | power_in | Main supply pin, with a standard operating voltage of 2.0 V to 3.6 V, also serving as the analog supply VDDA. |
| 5 | VSS/VSSA | power_in | Ground pin serving as the digital and analog 0 V reference for the device. |
| 6 | PF2-NRST | bidirectional | Reset pin with an embedded weak pull-up (RST I/O structure) when configured as reset, and an FT I/O when configured as GPIO, with alternate functions MCO and TIM1_CH4. |
| 7 | PA0 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN0 and wake-up input WKUP1. |
| 8 | PA1 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN1. |
| 9 | PA2 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN2, WKUP4 wake-up input and LSCO output. |
| 10 | PA3 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN3. |
| 11 | PA4 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN4 and RTC_OUT2, with alternate functions including SPI1_NSS, SPI2_MOSI and USB_NOE. |
| 12 | PA5 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function, serving as ADC input ADC_IN5, with alternate functions including SPI1_SCK and USART2_RX. |
| 13 | PA6 | bidirectional | 5 V-tolerant FT_fa I/O, Fm+ capable with analog switch function, serving as ADC input ADC_IN6, with alternate functions including SPI1_MISO and I2C2_SDA. |
| 14 | PA7 | bidirectional | 5 V-tolerant FT_fa I/O, Fm+ capable with analog switch function, serving as ADC input ADC_IN7, with alternate functions including SPI1_MOSI and I2C2_SCL. |
| 15 | PA8 | bidirectional | 5 V-tolerant FT_sa I/O supplied by VDDIO2 (internally tied to VDD on the GP package), serving as ADC input ADC_IN8 and MCO output. |
| 16 | PA11 [PA9] | bidirectional | 5 V-tolerant FT_usf I/O with USB function USB_DM, default mapping of which can be remapped to PA9 through SYSCFG_CFGR1. |
| 17 | PA12 [PA10] | bidirectional | 5 V-tolerant FT_usf I/O with USB function USB_DP, default mapping of which can be remapped to PA10 through SYSCFG_CFGR1. |
| 18 | PA13 | bidirectional | 5 V-tolerant FT_sa I/O that after reset is the SWDIO function with an internal pull-up, also serving as ADC input ADC_IN13. |
| 19 | PA14-BOOT0/PA15 | bidirectional | 5 V-tolerant FT_sa I/O that after reset is the SWCLK function with an internal pull-down, also serving as ADC input ADC_IN14 and BOOT0 boot-mode pin. |
| 20 | PB3/PB4/PB5/PB6 | bidirectional | Fm+ capable FT_f I/O shared among PB3, PB4, PB5 and PB6, with alternate functions including SPI1_SCK, USART1_TX, TIM1_CH2 and I2C1_SCL, and PB6 also serving as wake-up input WKUP3. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-20 |
| Category | |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | | 4 | V | | 51 |
| External supply voltage for selected I/Os | VDDIO2 | -0.3 | | 4 | V | | 51 |
| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | | | 100 | mA | | 51 |
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | | | 100 | mA | | 51 |
| Output current sunk by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 51 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 51 |
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | | | 80 | mA | | 51 |
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | | | 80 | mA | | 51 |
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | | | mA | Injected current on a FT_xx pin; max NA on positive side | 52 |
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | | | mA | | 52 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 52 |
| Maximum junction temperature | TJ | | | 130 | °C | | 52 |
| Standard operating voltage | VDD | 2 | | 3.6 | V | | 53 |
| External supply voltage for selected I/Os | VDDIO2 | 1.65 | | 3.6 | V | | 53 |
| AHB clock frequency | fHCLK | | | 48 | MHz | | 53 |
| APB clock frequency | fPCLK | | | 48 | MHz | | 53 |
| Ambient temperature, suffix 6 | TA | -40 | | 85 | °C | Suffix 6 | 53 |
| Junction temperature, suffix 6 | TJ | -40 | | 105 | °C | Suffix 6 | 53 |
| POR power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | | 54 |
| PDR power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | | 54 |
| Brownout reset threshold 1, rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 54 |
| Brownout reset threshold 1, falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 54 |
| Brownout reset threshold 2, rising | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 54 |
| Brownout reset threshold 2, falling | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 54 |
| Brownout reset threshold 3, rising | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 54 |
| Brownout reset threshold 3, falling | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 54 |
| Brownout reset threshold 4, rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 54 |
| Brownout reset threshold 4, falling | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 54 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | | 54 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | | 30 | 50 | mV | VDD = 3 V | 54 |
| Average temperature coefficient | TCoeff | | 20 | 70 | ppm/°C | | 54 |
| Long term stability | ACoeff | | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 54 |
| Voltage coefficient | VDDCoeff | | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 54 |
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | | | µs | | 54 |
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | | 8 | 12 | µs | | 54 |
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 9 | 13.5 | 23 | µA | | 54 |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | | 270 | 500 | µs | VDD rising | 54 |
| Supply current in Run mode, fetch from flash, 48 MHz | IDD(Run) | | 3.7 | 4 | mA | fHCLK 48 MHz from flash, all peripherals disabled, 25 °C; typ at VDD 3.0 V, max at VDD 3.6 V | 56 |
| Supply current in Sleep mode, flash enabled, 48 MHz | IDD(Sleep) | | 0.77 | 0.97 | mA | All peripherals disabled, fHCLK = fHSE_bypass 48 MHz, flash memory enabled, 25 °C | 61 |
| Supply current in Stop mode | IDD(Stop) | | 85.5 | 120 | µA | All clocks off, VDD = 3 V, 25 °C | 63 |
| Supply current in Standby mode | IDD(Standby) | | 7.35 | 8.4 | µA | All clocks off, VDD = 3 V, 25 °C | 64 |
| Supply current in Shutdown mode | IDD(Shutdown) | | 23 | 91 | nA | All clocks off, VDD = 3.0 V, 25 °C | 64 |
| Oscillator frequency | fOSC_IN | 4 | | 48 | MHz | | 70 |
| HSI48 frequency | fHSI48 | 47.92 | | 48.4 | MHz | VDD = 3.0 V, TA = 30 °C | 72 |
| HSI48 frequency drift over temperature and VDD full voltage range | ∆Temp(HSI) | -1 | | 1 | % | TA = 0 to 85 °C | 72 |
| HSI48 frequency drift over temperature and VDD full voltage range | ∆Temp(HSI) | -2.5 | | 2 | % | TA = -40 to 125 °C | 72 |
| HSIUSB48 accuracy over temperature, factory calibrated | ACCHSIUSB48_REL | -3 | | 3 | % | VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C | 73 |
| HSIUSB48 accuracy over temperature, factory calibrated | ACCHSIUSB48_REL | -4.5 | | 4.5 | % | VDD = 2.0 V to 3.6 V, TA = -40 to 125 °C | 73 |
| LSI frequency | fLSI | 31.04 | 32 | 32.96 | kHz | VDD = 3.3 V, TA = 25 °C | 74 |
| LSI frequency | fLSI | 29.5 | | 34 | kHz | VDD = 2 V to 3.6 V, TA = -40 to 125 °C | 74 |
| Output low level voltage, CMOS port | VOL | | | 0.4 | V | /IIO/ = 8 mA, VDDIOx ≥ 2.7 V | 81 |
| Output high level voltage, TTL port | VOH | 2.4 | | | V | TTL port, /IIO/ = 8 mA, VDDIOx ≥ 2.7 V | 81 |
| Output low level voltage, all I/Os | VOL | | | 1.3 | V | /IIO/ = 20 mA, VDDIOx ≥ 2.7 V | 81 |
| Weak pull-up equivalent resistor, I/O | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 79 |
| Weak pull-up equivalent resistor, NRST | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 83 |
| NRST input not filtered pulse | VNF(NRST) | 350 | | | ns | 2.0 V < VDD < 3.6 V | 83 |
| NRST input filtered pulse | VF(NRST) | | | 70 | ns | 2.0 V < VDD < 3.6 V | 83 |
| ADC analog supply voltage | VDDA | 2 | | 3.6 | V | | 84 |
| ADC clock frequency | fADC | 0.14 | | 35 | MHz | | 84 |
| External input impedance | RAIN | | | 50 | kΩ | | 84 |
## CAD (KiCad official)
- Symbol: `STM32C071F8P6`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `stm32c071f8p6-etched.step` / `stm32c071f8p6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32c071f8p6.step` / `stm32c071f8p6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32c071f8p6.pdf) (131 pp, sha256 `143ef3551f99ae75`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32c071f8p6-datasheet.pdf)