Generated by kicad-footprint-generator · KiCad file format 20260206
STM32C031K6U3
STMicroelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · UFQFPN-32(5x5)
STM32C031K6U3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9 | bidirectional | 5 V-tolerant Fm+-capable (FT_f) general-purpose I/O with alternate functions IR_OUT, USART2_RTS_DE_CK, TIM17_CH1, TIM3_CH2, I2C1_SDA and EVENTOUT. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant Fm+-capable (FT_f) I/O that also serves as the OSCX_IN oscillator input, with alternate functions USART1_TX, TIM1_ETR, TIM1_BKIN2, IR_OUT, USART2_RTS_DE_CK, TIM17_CH1, TIM3_CH2, I2C1_SDA and EVENTOUT. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant (FT) I/O that also serves as the OSCX_OUT oscillator output, with alternate functions OSC32_EN, OSC_EN, TIM1_ETR and TIM3_CH3. |
| 4 | VDD/VDDA | power_in | Power supply pin for the digital (VDD) and analog (VDDA) domains; standard operating voltage is 2.0 V to 3.6 V. |
| 5 | VSS/VSSA | power_in | Ground pin for the digital (VSS) and analog (VSSA) domains, to which all voltages are referenced. |
| 6 | PF2-NRST | bidirectional | Reset pin with embedded weak pull-up (RST structure) when configured as reset, or a 5 V-tolerant (FT) GPIO when configured as GPIO, with alternate functions MCO and TIM1_CH4. |
| 7 | PA0 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions USART2_CTS, TIM16_CH1, USART1_TX and TIM1_CH1, and additional function ADC_IN0 and WKUP1. |
| 8 | PA1 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM17_CH1, USART1_RX, TIM1_CH2, I2C1_SMBA and EVENTOUT, and additional function ADC_IN1. |
| 9 | PA2 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM16_CH1N, TIM3_ETR and TIM1_CH3, and additional functions ADC_IN2, WKUP4 and LSCO. |
| 10 | PA3 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions USART2_RX, TIM1_CH1N, TIM1_CH4 and EVENTOUT, and additional function ADC_IN3. |
| 11 | PA4 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_NSS/I2S1_WS, USART2_TX, TIM1_CH2N, TIM14_CH1, TIM17_CH1N and EVENTOUT, and additional functions ADC_IN4 and RTC_OUT2. |
| 12 | PA5 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_SCK/I2S1_CK, USART2_RX, TIM1_CH3N, TIM1_CH1 and EVENTOUT, and additional function ADC_IN5. |
| 13 | PA6 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN and TIM16_CH1, and additional function ADC_IN6. |
| 14 | PA7 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1 and TIM17_CH1, and additional function ADC_IN7. |
| 15 | PB0 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3 and TIM1_CH2N, and additional function ADC_IN17. |
| 16 | PB1 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM1_CH2N and EVENTOUT, and additional function ADC_IN18. |
| 17 | PB2 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions USART1_RX, MCO2 and EVENTOUT, and additional function ADC_IN19. |
| 18 | PA8 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions MCO, USART2_TX, TIM1_CH1, EVENTOUT, SPI1_NSS/I2S1_WS, TIM1_CH2N, TIM1_CH3N, TIM3_CH3, TIM3_CH4, TIM14_CH1, USART1_RX and MCO2, and additional function ADC_IN8. |
| 19 | PA9 | bidirectional | 5 V-tolerant Fm+-capable (FT_f) I/O with alternate functions MCO, USART1_TX, TIM1_CH2, TIM3_ETR, I2C1_SCL and EVENTOUT; it can be remapped in place of PA11 (default mapping) through SYSCFG_CFGR1. |
| 20 | PC6 | bidirectional | 5 V-tolerant (FT) general-purpose I/O with alternate function TIM3_CH1. |
| 21 | PA10 | bidirectional | 5 V-tolerant Fm+-capable (FT_f) I/O with alternate functions USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA and EVENTOUT; it can be remapped in place of PA12 (default mapping) through SYSCFG_CFGR1. |
| 22 | PA11 [PA9] | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4 and TIM1_BKIN2, and additional function ADC_IN11; the bracketed PA9 is the remapped function. |
| 23 | PA12 [PA10] | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) with alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR and I2S_CKIN, and additional function ADC_IN12; the bracketed PA10 is the remapped function. |
| 24 | PA13 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) that is configured as SWDIO after reset with an internal pull-up enabled, with alternate functions IR_OUT, TIM3_ETR, USART2_RX and EVENTOUT, and additional function ADC_IN13. |
| 25 | PA14-BOOT0 | bidirectional | 5 V-tolerant analog-switch I/O (FT_a) that is configured as SWCLK after reset with an internal pull-down enabled, with alternate functions USART2_TX, EVENTOUT, SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2 and USART1_RTS_DE_CK, and additional functions ADC_IN14 and BOOT0. |
| 26 | PA15 | bidirectional | 5 V-tolerant (FT) general-purpose I/O with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, USART1_RTS_DE_CK and EVENTOUT. |
| 27 | PB3 | bidirectional | 5 V-tolerant (FT) general-purpose I/O with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS_DE_CK and EVENTOUT. |
| 28 | PB4 | bidirectional | 5 V-tolerant (FT) general-purpose I/O with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BKIN and EVENTOUT. |
| 29 | PB5 | bidirectional | 5 V-tolerant (FT) general-purpose I/O with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, TIM3_CH3 and I2C1_SMBA, and additional function WKUP6. |
| 30 | PB6 | bidirectional | 5 V-tolerant Fm+-capable (FT_f) I/O with alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, TIM3_CH3, USART1_RTS_DE_CK, USART1_CTS, I2C1_SCL, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI1_MISO/I2S1_MCK, SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH1, TIM3_CH2, TIM16_BKIN and TIM17_BKIN, and additional function WKUP3. |
| 31 | PB7 | bidirectional | 5 V-tolerant Fm+-capable (FT_f) I/O with alternate functions USART1_RX, TIM1_CH4, TIM17_CH1N, TIM3_CH4, I2C1_SDA, EVENTOUT, USART2_CTS, TIM16_CH1, TIM3_CH1 and I2C1_SCL, and additional function RTC_REFIN. |
| 32 | PB8 | bidirectional | 5 V-tolerant Fm+-capable (FT_f) I/O with alternate functions USART2_CTS, TIM16_CH1, TIM3_CH1, I2C1_SCL and EVENTOUT. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD - VSS | -0.3 | 4 | V | 41 | ||
| External voltage on VREF+ pin | VREF+ | -0.3 | V | 41 | |||
| Input voltage on pin | VIN | -0.3 | V | 41 | |||
| Current into VDD/VDDA power pin (source) | IVDD/VDDA | 100 | mA | 41 | |||
| Current out of VSS/VSSA ground pin (sink) | IVSS/VSSA | 100 | mA | 41 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | 41 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 41 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 41 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 41 | |||
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | 0 | mA | Printed as -5 / 0 | 41 | |
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | mA | Printed in Max column | 41 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 41 | ||
| Maximum junction temperature | TJ | 130 | °C | 41 | |||
| Standard operating voltage | VDD | 2 | 3.6 | V | 42 | ||
| I/O input voltage | VIN | -0.3 | V | 42 | |||
| APB clock frequency | fPCLK | 48 | MHz | 42 | |||
| Ambient temperature | TA | -40 | 125 | °C | Suffix 3 | 42 | |
| Junction temperature | TJ | -40 | 130 | °C | Suffix 3 | 42 | |
| VDD rise time rate | tVDD | 0 | µs/V | 42 | |||
| VDD fall time rate | tVDD | 10 | µs/V | 42 | |||
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 270 | 500 | µs | VDD rising | 42 | |
| Power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | 42 | |
| Power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | 42 | |
| Brownout reset threshold 1 | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 43 |
| Brownout reset threshold 1 | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 43 |
| Brownout reset threshold 2 | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 43 |
| Brownout reset threshold 2 | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 43 |
| Brownout reset threshold 3 | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 43 |
| Brownout reset threshold 3 | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 43 |
| Brownout reset threshold 4 | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 43 |
| Brownout reset threshold 4 | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 43 |
| BOR consumption | IDD(BOR) | 2.2 | 2.5 | µA | Specified by design, not tested in production | 43 | |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | 43 | |
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | 43 | |||
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | 8 | 12 | µs | 43 | ||
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 9 | 13.5 | 23 | µA | 43 | |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 30 | 50 | mV | VDD = 3 V | 43 | |
| Average temperature coefficient | TCoeff | 20 | 70 | ppm/°C | 43 | ||
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 43 | |
| Supply current in Run mode, fetch from flash, 25 °C | IDD(Run) | 3.05 | 3.6 | mA | fHCLK = fHSE_bypass 48 MHz; typ at VDD 3.0 V, max at VDD 3.6 V; all peripherals disabled | 45 | |
| Supply current in Run mode, fetch from flash, 125 °C | IDD(Run) | 3.35 | 4.6 | mA | fHCLK = fHSE_bypass 48 MHz; typ at VDD 3.0 V, max at VDD 3.6 V; all peripherals disabled | 45 | |
| Supply current in Run mode, fetch from flash, 25 °C | IDD(Run) | 3.4 | 3.9 | mA | fHCLK = fHSI48/HSIDIV = 48 MHz; typ at VDD 3.0 V, max at VDD 3.6 V; all peripherals disabled | 46 | |
| Supply current in Sleep mode, flash enabled, 25 °C | IDD(Sleep) | 1.2 | 1.5 | mA | All peripherals disabled, fHCLK = 48 MHz (fHSI48/HSIDIV) | 49 | |
| Supply current in Sleep mode, flash enabled, 125 °C | IDD(Sleep) | 1.35 | 2.5 | mA | All peripherals disabled, fHCLK = 48 MHz (fHSI48/HSIDIV) | 49 | |
| Supply current in Stop mode, 25 °C | IDD(Stop) | 80 | 110 | µA | All clocks off, VDD = 3 V | 50 | |
| Supply current in Stop mode, 125 °C | IDD(Stop) | 275 | 1100 | µA | All clocks off, VDD = 3 V | 50 | |
| Supply current in Standby mode, 25 °C | IDD(Standby) | 7.45 | 8.2 | µA | All clocks off, VDD = 3 V | 51 | |
| Supply current in Standby mode, 125 °C | IDD(Standby) | 12 | 18 | µA | All clocks off, VDD = 3 V | 51 | |
| Supply current in Shutdown mode, 25 °C | IDD(Shutdown) | 19 | 72 | nA | All clocks off, VDD = 3.0 V | 51 | |
| Supply current in Shutdown mode, 125 °C | IDD(Shutdown) | 2900 | 8900 | nA | All clocks off, VDD = 3.0 V | 51 | |
| Wake-up time from Stop mode, flash powered | tWULPSTOP | 2.7 | 3.1 | µs | HCLK = HSI48/4 = 12 MHz; execution in flash memory powered during Stop mode | 54 | |
| HSI48 frequency | fHSI48 | 47.92 | 48.4 | MHz | VDD = 3.0 V, TA = 30 °C | 59 | |
| LSI frequency | fLSI | 31.04 | 32 | 32.96 | kHz | VDD = 3.3 V, TA = 25 °C | 60 |
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 2 V to 3.6 V, TA = -40 to 125 °C | 60 | |
| Weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 65 |
| Weak pull-down equivalent resistor | RPD | 25 | 40 | 55 | kΩ | VIN = VDDIO1 | 65 |
| Output low level voltage CMOS port | VOL | 0.4 | V | /IIO/ = 8 mA, VDD ≥ 2.7 V | 67 | ||
| Output high level voltage TTL port | VOH | 2.4 | V | /IIO/ = 8 mA, VDD ≥ 2.7 V | 67 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32C031K6U3 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32c031k6u3-etched.step/stm32c031k6u3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32c031k6u3.step/stm32c031k6u3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (103 pp, sha256
896fc5601df00779, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).