main
History Download
Ray Publish 0.1.0 c1c8559

STM32C031F6P6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

STM32C031F6P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB7 bidirectional 5 V-tolerant I/O (FT) with alternate functions USART1_RX, TIM1_CH4, I2C1_SDA, I2C1_SCL and USART2_CTS, and RTC_REFIN as an additional function.
2 PC14-OSCX_IN bidirectional 5 V-tolerant I/O (FT) that serves as the OSCX_IN input of the 32.768 kHz low-speed oscillator, with alternate functions USART1_TX, TIM1_ETR, I2C1_SDA and IR_OUT.
3 PC15-OSCX_OUT bidirectional 5 V-tolerant I/O (FT) that serves as the OSCX_OUT output of the 32.768 kHz low-speed oscillator, with alternate functions OSC32_EN, OSC_EN, TIM1_ETR and TIM3_CH3.
4 VDD/VDDA power_in Main supply for VDD, VDDA and VDDIO1 at 2.0 V to 3.6 V (VDD is the regulator and system supply, VDDA the ADC analog supply); decouple with 100 nF plus 4.7 µF as shown in Figure 11.
5 VSS/VSSA power_in Ground reference for digital and analog circuits; all voltages are referenced to VSS.
6 PF2-NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor (RPU 25 to 55 kΩ), also usable as MCO and TIM1_CH4 alternate functions.
7 PA0 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN0 and wakeup pin WKUP1, plus alternate functions USART2_CTS, TIM16_CH1, USART1_TX and TIM1_CH1.
8 PA1 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN1, plus alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM17_CH1, USART1_RX, TIM1_CH2 and I2C1_SMBA.
9 PA2 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN2, wakeup pin WKUP4 and LSCO output, plus alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM16_CH1N, TIM3_ETR and TIM1_CH3.
10 PA3 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN3, plus alternate functions USART2_RX, TIM1_CH1N, TIM1_CH4 and EVENTOUT.
11 PA4 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN4 and wakeup pin WKUP2, plus alternate functions SPI1_NSS/I2S1_WS, USART2_TX, TIM1_CH2N, TIM14_CH1 and TIM17_CH1N.
12 PA5 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN5, plus alternate functions SPI1_SCK/I2S1_CK, USART2_RX, TIM1_CH3N and TIM1_CH1.
13 PA6 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN6, plus alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN and TIM16_CH1.
14 PA7 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN7, plus alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1 and TIM17_CH1.
15 PA8 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN8, plus alternate functions MCO, USART2_TX, TIM1_CH1, EVENTOUT, USART1_RX and MCO2.
16 PA11 [PA9] bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN11, plus alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4 and TIM1_BKIN2; PA9 is the remapped function selectable through SYSCFG_CFGR1.
17 PA12 [PA10] bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN12, plus alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR and I2S_CKIN; PA10 is the remapped function selectable through SYSCFG_CFGR1.
18 PA13 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN13, which at reset is the SWDIO function with internal pull-up enabled, plus alternate functions IR_OUT, TIM3_ETR, USART2_RX and EVENTOUT.
19 PA14-BOOT0 bidirectional 5 V-tolerant I/O (FT) with ADC input channel ADC_IN14 that also serves as the BOOT0 boot selection pin, and at reset is the SWCLK function with internal pull-down enabled.
20 PB6 bidirectional 5 V-tolerant I/O (FT) with wakeup pin WKUP3, plus alternate functions USART1_TX, I2C1_SCL, I2C1_SMBA, TIM1_CH3 and TIM3_CH1, and it carries the I2C bootloader pin function.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External supply voltage VDD - VSS -0.3 4 V 42
External voltage on VREF+ pin VREF+ -0.3 V 42
Input voltage on pin VIN -0.3 V 42
Current into VDD/VDDA power pin (source) IVDD/VDDA 100 mA 42
Current out of VSS/VSSA ground pin (sink) IVSS/VSSA 100 mA 42
Output current sunk by any I/O and control pin IIO(PIN) 20 mA 42
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 42
Total output current sunk by sum of all I/Os and control pins ΣI(PIN) 80 mA 42
Total output current sourced by sum of all I/Os and control pins ΣI(PIN) 80 mA 42
Injected current on a FT_xx pin IINJ(PIN) -5 0 mA 42
Total injected current (sum of all I/Os and control pins) ΣIINJ(PIN) -25 mA 42
Storage temperature range TSTG -65 150 °C 43
Maximum junction temperature TJ 130 °C 43
Electrostatic discharge voltage (human body model) VESD(HBM) 2000 V TA = +25 °C, ANSI/ESDA/JEDEC JS-001 65
Electrostatic discharge voltage (charge device model) VESD(CDM) 500 V TA = +25 °C, ANSI/ESDA/JEDEC JS-002 65
Standard operating voltage VDD 2 3.6 V 44
I/O input voltage VIN -0.3 V 44
APB clock frequency fPCLK 48 MHz 44
Ambient temperature TA -40 85 °C Suffix 6 44
Junction temperature TJ -40 105 °C Suffix 6 44
VDD rise time rate tVDD 0 µs/V 44
VDD fall time rate 10 µs/V 44
POR temporization when VDD crosses VPOR tRSTTEMPO 270 500 µs VDD rising 44
Power-on reset threshold VPOR 1.9 1.94 1.98 V 44
Power-down reset threshold VPDR 1.88 1.92 1.96 V 44
Brownout reset threshold 1 VBOR1 2.05 2.1 2.18 V VDD rising 45
Brownout reset threshold 1 VBOR1 1.95 2 2.08 V VDD falling 45
Brownout reset threshold 2 VBOR2 2.2 2.31 2.38 V VDD rising 45
Brownout reset threshold 2 VBOR2 2.1 2.21 2.28 V VDD falling 45
Brownout reset threshold 3 VBOR3 2.5 2.62 2.68 V VDD rising 45
Brownout reset threshold 3 VBOR3 2.4 2.52 2.58 V VDD falling 45
Brownout reset threshold 4 VBOR4 2.8 2.91 3 V VDD rising 45
Brownout reset threshold 4 VBOR4 2.7 2.81 2.9 V VDD falling 45
BOR consumption IDD(BOR) 2.2 2.5 µA 45
Internal reference voltage VREFINT 1.182 1.212 1.232 V 45
ADC sampling time when reading the internal reference voltage tS_vrefint 4 µs 45
Start time of reference voltage buffer when ADC is enabled tstart_vrefint 8 12 µs 45
VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) 9 13.5 23 µA 45
Internal reference voltage spread over the temperature range ΔVREFINT 30 50 mV VDD = 3 V 45
Average temperature coefficient TCoeff 20 70 ppm/°C 45
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25 °C 45
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 45
Supply current in Run mode, fetch from flash, 25 °C IDD(Run) 3.05 3.6 mA fHCLK = 48 MHz, flash memory, die 25 °C, max VDD 3.6 V 47
Supply current in Run mode, fetch from flash, 125 °C IDD(Run) 3.35 4.6 mA fHCLK = 48 MHz, flash memory, die 125 °C, max VDD 3.6 V 47
Supply current in Sleep mode, HSE bypass, 25 °C IDD(Sleep) 0.82 1.2 mA All peripherals disabled, fHCLK = fHSE_bypass 48 MHz, 25 °C 51
Supply current in Stop mode, 25 °C IDD(Stop) 81.5 110 µA All clocks off, VDD = 3.6 V, 25 °C 52
Supply current in Stop mode, 125 °C IDD(Stop) 280 1100 µA All clocks off, VDD = 3.6 V, 125 °C 52
Supply current in Standby mode, 25 °C IDD(Standby) 7.9 8.7 µA All clocks off, VDD = 3.6 V, 25 °C 53
Supply current in Standby mode, 125 °C IDD(Standby) 12.5 20 µA All clocks off, VDD = 3.6 V, 125 °C 53
Supply current in Shutdown mode, 25 °C IDD(Shutdown) 31 95 nA All clocks off, VDD = 3.6 V, 25 °C 53
Supply current in Shutdown mode, 125 °C IDD(Shutdown) 3350 11000 nA All clocks off, VDD = 3.6 V, 125 °C 53
Oscillator frequency (HSE) fOSC_IN 4 48 MHz 58
HSI48 frequency fHSI48 47.92 48.4 MHz VDD = 3.0 V, TA = 30 °C 61
LSI frequency fLSI 31.04 32 32.96 kHz VDD = 3.3 V, TA = 25 °C 62
LSI frequency fLSI 29.5 34 kHz VDD = 2 V to 3.6 V, TA = -40 to 125 °C 62
Internal pull-up equivalent resistor (NRST) RPU 25 40 55 kΩ VIN = VSS 71
Weak pull-up equivalent resistor (I/O) RPU 25 40 55 kΩ VIN = VSS 67
Analog supply voltage VDDA 2 3.6 V 72
ADC clock frequency fADC 0.14 35 MHz 72
Wakeup time from Stop mode, flash powered tWULPSTOP 2.7 3.1 µs Clock after wakeup HCLK = HSI48/4 = 12 MHz, flash powered during Stop 56

CAD (KiCad official)

  • Symbol: STM32C031F6P6
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: stm32c031f6p6-etched.step / stm32c031f6p6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32c031f6p6.step / stm32c031f6p6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (108 pp, sha256 c0de50247b672919, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF