← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM32C031C6T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32C031C6T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PC13 | bidirectional | 5V-tolerant (FT) general-purpose I/O; alternate functions TIM1_ETR, TIM1_BKIN; additional functions RTC timestamp input (RTC_TS), RTC calibration/alarm output (RTC_OUT1) and wakeup pin WKUP2. |+| 2 | PC14-OSCX_IN (PC14) | bidirectional | 5V-tolerant (FT) I/O, default function is LSE 32.768 kHz oscillator input (OSCX_IN); alternate functions USART1_TX, TIM1_ETR, TIM1_BKIN2, IR_OUT, USART2_RTS_DE_CK, TIM17_CH1, TIM3_CH2, I2C1_SDA, EVENTOUT. |+| 3 | PC15-OSCX_OUT (PC15) | bidirectional | 5V-tolerant (FT) I/O, default function is LSE 32.768 kHz oscillator output (OSCX_OUT); alternate functions OSC32_EN, OSC_EN, TIM1_ETR, TIM3_CH3. |+| 4 | PF3 | passive | Pin listed as type S with no alternate or additional function in the pin assignment table; function/behavior is not further described in this datasheet section (see review note). |+| 5 | VREF+ | power_in | Positive analog reference voltage input for the ADC; must be between 2.0 V and VDDA, can be grounded when the analog peripherals using it are inactive. |+| 6 | VDD/VDDA | power_in | Main digital and analog power supply input, 2.0 V (1.96 V min functional) to 3.6 V, supplies the internal regulator, system analog blocks and the ADC. |+| 7 | VSS/VSSA | power_in | Digital and analog ground reference pin. |+| 8 | PF0-OSC_IN (PF0) | bidirectional | 5V-tolerant (FT) I/O, default function is HSE crystal/external clock input (OSC_IN, 4-48 MHz); alternate function TIM14_CH1. |+| 9 | PF1-OSC_OUT (PF1) | bidirectional | 5V-tolerant (FT) I/O, default function is HSE crystal oscillator output (OSC_OUT); alternate function OSC_EN. |+| 10 | PF2-NRST | bidirectional | 5V-tolerant (FT) I/O shared with the bidirectional reset pin NRST, which has an embedded weak pull-up resistor; alternate functions MCO, TIM1_CH4. |+| 11 | PA0 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART2_CTS, TIM16_CH1, USART1_TX, TIM1_CH1; additional functions ADC_IN0 and wakeup pin WKUP1. |+| 12 | PA1 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM17_CH1, USART1_RX, TIM1_CH2, I2C1_SMBA, EVENTOUT; additional function ADC_IN1. |+| 13 | PA2 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM16_CH1N, TIM3_ETR, TIM1_CH3; additional functions ADC_IN2, wakeup pin WKUP4 and LSCO clock output. |+| 14 | PA3 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART2_RX, TIM1_CH1N, TIM1_CH4, EVENTOUT; additional function ADC_IN3. |+| 15 | PA4 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_NSS/I2S1_WS, USART2_TX, TIM1_CH2N, TIM14_CH1, TIM17_CH1N, EVENTOUT; additional functions ADC_IN4 and RTC_OUT2. |+| 16 | PA5 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_SCK/I2S1_CK, USART2_RX, TIM1_CH3N, TIM1_CH1, EVENTOUT; additional function ADC_IN5. |+| 17 | PA6 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1; additional function ADC_IN6. |+| 18 | PA7 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1; additional function ADC_IN7. |+| 19 | PB0 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N; additional function ADC_IN17. |+| 20 | PB1 | bidirectional | 5V-tolerant (FT) I/O; alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM1_CH2N, EVENTOUT; additional function ADC_IN18. |+| 21 | PB2 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART1_RX, MCO2, EVENTOUT; additional function ADC_IN19. |+| 22 | PB10 | bidirectional | 5V-tolerant (FT) I/O with no listed alternate function; additional function ADC_IN20. |+| 23 | PB11 | bidirectional | 5V-tolerant (FT) I/O with no listed alternate function; additional function ADC_IN21. |+| 24 | PB12 | bidirectional | 5V-tolerant (FT) I/O; alternate functions TIM1_BKIN2, TIM1_BKIN, EVENTOUT; additional function ADC_IN22. |+| 25 | PB13 | bidirectional | 5V-tolerant (FT) I/O; alternate functions TIM1_CH1N, EVENTOUT; no additional function listed. |+| 26 | PB14 | bidirectional | 5V-tolerant (FT) I/O; alternate functions TIM1_CH2N, EVENTOUT; no additional function listed. |+| 27 | PB15 | bidirectional | 5V-tolerant (FT) I/O; alternate functions TIM1_CH3N, EVENTOUT; additional function RTC_REFIN. |+| 28 | PA8 | bidirectional | 5V-tolerant (FT) I/O; alternate functions MCO, USART2_TX, TIM1_CH1, EVENTOUT, SPI1_NSS/I2S1_WS, TIM1_CH2N, TIM1_CH3N, TIM3_CH3, TIM3_CH4, TIM14_CH1, USART1_RX, MCO2; additional function ADC_IN8. |+| 29 | PA9 | bidirectional | 5V-tolerant (FT) I/O; alternate functions MCO, USART1_TX, TIM1_CH2, TIM3_ETR, I2C1_SCL, EVENTOUT; can be remapped to appear on pin 33 in place of PA11 via SYSCFG_CFGR1. |+| 30 | PC6 | bidirectional | 5V-tolerant (FT) I/O; alternate function TIM3_CH1; no additional function listed. |+| 31 | PC7 | bidirectional | 5V-tolerant (FT) I/O; alternate function TIM3_CH2; no additional function listed. |+| 32 | PA10 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT; can be remapped to appear on pin 34 in place of PA12 via SYSCFG_CFGR1. |+| 33 | PA11 [PA9] | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2; additional function ADC_IN11; PA9 function can be remapped onto this pin via SYSCFG_CFGR1. |+| 34 | PA12 [PA10] | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN; additional function ADC_IN12; PA10 function can be remapped onto this pin via SYSCFG_CFGR1. |+| 35 | PA13 | bidirectional | 5V-tolerant (FT) I/O; default alternate function SWDIO (SWD data), also IR_OUT, TIM3_ETR, USART2_RX, EVENTOUT; additional function ADC_IN13; internal pull-up active on this pin at reset. |+| 36 | PA14-BOOT0 | bidirectional | 5V-tolerant (FT) I/O; default alternate function SWCLK (SWD clock), also USART2_TX, EVENTOUT, SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, USART1_RTS_DE_CK; additional functions ADC_IN14 and BOOT0 boot-selector; internal pull-down active on this pin at reset. |+| 37 | PA15 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, USART1_RTS_DE_CK, EVENTOUT; no additional function listed. |+| 38 | PD0 | bidirectional | 5V-tolerant (FT) I/O; alternate functions EVENTOUT, TIM16_CH1; no additional function listed. |+| 39 | PD1 | bidirectional | 5V-tolerant (FT) I/O; alternate functions EVENTOUT, TIM17_CH1; no additional function listed. |+| 40 | PD2 | bidirectional | 5V-tolerant (FT) I/O; alternate functions TIM3_ETR, TIM1_CH1N; no additional function listed. |+| 41 | PD3 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART2_CTS, TIM1_CH2N; no additional function listed. |+| 42 | PB3 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS_DE_CK, EVENTOUT; no additional function listed. |+| 43 | PB4 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BKIN, EVENTOUT; no additional function listed. |+| 44 | PB5 | bidirectional | 5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, TIM3_CH3, I2C1_SMBA; additional function wakeup pin WKUP6. |+| 45 | PB6 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, TIM3_CH3, USART1_RTS_DE_CK, USART1_CTS, I2C1_SCL, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI1_MISO/I2S1_MCK, SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH1, TIM3_CH2, TIM16_BKIN, TIM17_BKIN; additional function wakeup pin WKUP3. |+| 46 | PB7 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH4, TIM17_CH1N, TIM3_CH4, I2C1_SDA, EVENTOUT, USART2_CTS, TIM16_CH1, TIM3_CH1, I2C1_SCL; no additional function listed on this package. |+| 47 | PB8 | bidirectional | 5V-tolerant (FT) I/O; alternate functions USART2_CTS, TIM16_CH1, TIM3_CH1, I2C1_SCL, EVENTOUT; no additional function listed. |+| 48 | PB9 | bidirectional | 5V-tolerant (FT) I/O; alternate functions IR_OUT, USART2_RTS_DE_CK, TIM17_CH1, TIM3_CH2, I2C1_SDA, EVENTOUT; no additional function listed. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32C031C6T6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32c031c6t6-etched.step` / `stm32c031c6t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32c031c6t6.step` / `stm32c031c6t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904241878228992) (108 pp, sha256 `c0de50247b672919`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32c031c6t6-datasheet.pdf)
page.jsonadded+383@@ -0,0 +1,383 @@+{+ "slug": "stm32c031c6t6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32c031c6t6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32c031c6t6.kicad_sym",+ "stm32c031c6t6.kicad_mod",+ "stm32c031c6t6.glb",+ "stm32c031c6t6.step",+ "stm32c031c6t6.lbr",+ "docs/hero.png",+ "docs/stm32c031c6t6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32C031C6T6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904241878228992",+ "parts": {+ "symbol": "stm32c031c6t6.kicad_sym",+ "footprint": "stm32c031c6t6.kicad_mod",+ "model_3d": "stm32c031c6t6-etched.glb",+ "model_3d_plain": "stm32c031c6t6.glb",+ "model_3d_step": "stm32c031c6t6-etched.step",+ "model_3d_step_plain": "stm32c031c6t6.step",+ "lbr": "stm32c031c6t6.lbr"+ },+ "distributor_links": {+ "lcsc": "C5456218"+ },+ "pins": [+ {+ "number": "1",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) general-purpose I/O; alternate functions TIM1_ETR, TIM1_BKIN; additional functions RTC timestamp input (RTC_TS), RTC calibration/alarm output (RTC_OUT1) and wakeup pin WKUP2."+ },+ {+ "number": "2",+ "name": "PC14-OSCX_IN (PC14)",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O, default function is LSE 32.768 kHz oscillator input (OSCX_IN); alternate functions USART1_TX, TIM1_ETR, TIM1_BKIN2, IR_OUT, USART2_RTS_DE_CK, TIM17_CH1, TIM3_CH2, I2C1_SDA, EVENTOUT."+ },+ {+ "number": "3",+ "name": "PC15-OSCX_OUT (PC15)",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O, default function is LSE 32.768 kHz oscillator output (OSCX_OUT); alternate functions OSC32_EN, OSC_EN, TIM1_ETR, TIM3_CH3."+ },+ {+ "number": "4",+ "name": "PF3",+ "type": "passive",+ "description": "Pin listed as type S with no alternate or additional function in the pin assignment table; function/behavior is not further described in this datasheet section (see review note)."+ },+ {+ "number": "5",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive analog reference voltage input for the ADC; must be between 2.0 V and VDDA, can be grounded when the analog peripherals using it are inactive."+ },+ {+ "number": "6",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "Main digital and analog power supply input, 2.0 V (1.96 V min functional) to 3.6 V, supplies the internal regulator, system analog blocks and the ADC."+ },+ {+ "number": "7",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "Digital and analog ground reference pin."+ },+ {+ "number": "8",+ "name": "PF0-OSC_IN (PF0)",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O, default function is HSE crystal/external clock input (OSC_IN, 4-48 MHz); alternate function TIM14_CH1."+ },+ {+ "number": "9",+ "name": "PF1-OSC_OUT (PF1)",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O, default function is HSE crystal oscillator output (OSC_OUT); alternate function OSC_EN."+ },+ {+ "number": "10",+ "name": "PF2-NRST",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O shared with the bidirectional reset pin NRST, which has an embedded weak pull-up resistor; alternate functions MCO, TIM1_CH4."+ },+ {+ "number": "11",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART2_CTS, TIM16_CH1, USART1_TX, TIM1_CH1; additional functions ADC_IN0 and wakeup pin WKUP1."+ },+ {+ "number": "12",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM17_CH1, USART1_RX, TIM1_CH2, I2C1_SMBA, EVENTOUT; additional function ADC_IN1."+ },+ {+ "number": "13",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM16_CH1N, TIM3_ETR, TIM1_CH3; additional functions ADC_IN2, wakeup pin WKUP4 and LSCO clock output."+ },+ {+ "number": "14",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART2_RX, TIM1_CH1N, TIM1_CH4, EVENTOUT; additional function ADC_IN3."+ },+ {+ "number": "15",+ "name": "PA4",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_NSS/I2S1_WS, USART2_TX, TIM1_CH2N, TIM14_CH1, TIM17_CH1N, EVENTOUT; additional functions ADC_IN4 and RTC_OUT2."+ },+ {+ "number": "16",+ "name": "PA5",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_SCK/I2S1_CK, USART2_RX, TIM1_CH3N, TIM1_CH1, EVENTOUT; additional function ADC_IN5."+ },+ {+ "number": "17",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1; additional function ADC_IN6."+ },+ {+ "number": "18",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1; additional function ADC_IN7."+ },+ {+ "number": "19",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N; additional function ADC_IN17."+ },+ {+ "number": "20",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions TIM14_CH1, TIM3_CH4, TIM1_CH3N, TIM1_CH2N, EVENTOUT; additional function ADC_IN18."+ },+ {+ "number": "21",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART1_RX, MCO2, EVENTOUT; additional function ADC_IN19."+ },+ {+ "number": "22",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O with no listed alternate function; additional function ADC_IN20."+ },+ {+ "number": "23",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O with no listed alternate function; additional function ADC_IN21."+ },+ {+ "number": "24",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions TIM1_BKIN2, TIM1_BKIN, EVENTOUT; additional function ADC_IN22."+ },+ {+ "number": "25",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions TIM1_CH1N, EVENTOUT; no additional function listed."+ },+ {+ "number": "26",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions TIM1_CH2N, EVENTOUT; no additional function listed."+ },+ {+ "number": "27",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions TIM1_CH3N, EVENTOUT; additional function RTC_REFIN."+ },+ {+ "number": "28",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions MCO, USART2_TX, TIM1_CH1, EVENTOUT, SPI1_NSS/I2S1_WS, TIM1_CH2N, TIM1_CH3N, TIM3_CH3, TIM3_CH4, TIM14_CH1, USART1_RX, MCO2; additional function ADC_IN8."+ },+ {+ "number": "29",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions MCO, USART1_TX, TIM1_CH2, TIM3_ETR, I2C1_SCL, EVENTOUT; can be remapped to appear on pin 33 in place of PA11 via SYSCFG_CFGR1."+ },+ {+ "number": "30",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate function TIM3_CH1; no additional function listed."+ },+ {+ "number": "31",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate function TIM3_CH2; no additional function listed."+ },+ {+ "number": "32",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT; can be remapped to appear on pin 34 in place of PA12 via SYSCFG_CFGR1."+ },+ {+ "number": "33",+ "name": "PA11 [PA9]",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2; additional function ADC_IN11; PA9 function can be remapped onto this pin via SYSCFG_CFGR1."+ },+ {+ "number": "34",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN; additional function ADC_IN12; PA10 function can be remapped onto this pin via SYSCFG_CFGR1."+ },+ {+ "number": "35",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; default alternate function SWDIO (SWD data), also IR_OUT, TIM3_ETR, USART2_RX, EVENTOUT; additional function ADC_IN13; internal pull-up active on this pin at reset."+ },+ {+ "number": "36",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; default alternate function SWCLK (SWD clock), also USART2_TX, EVENTOUT, SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, USART1_RTS_DE_CK; additional functions ADC_IN14 and BOOT0 boot-selector; internal pull-down active on this pin at reset."+ },+ {+ "number": "37",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM1_CH1, MCO2, USART1_RTS_DE_CK, EVENTOUT; no additional function listed."+ },+ {+ "number": "38",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions EVENTOUT, TIM16_CH1; no additional function listed."+ },+ {+ "number": "39",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions EVENTOUT, TIM17_CH1; no additional function listed."+ },+ {+ "number": "40",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions TIM3_ETR, TIM1_CH1N; no additional function listed."+ },+ {+ "number": "41",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART2_CTS, TIM1_CH2N; no additional function listed."+ },+ {+ "number": "42",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH2, USART1_RTS_DE_CK, EVENTOUT; no additional function listed."+ },+ {+ "number": "43",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BKIN, EVENTOUT; no additional function listed."+ },+ {+ "number": "44",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, TIM3_CH3, I2C1_SMBA; additional function wakeup pin WKUP6."+ },+ {+ "number": "45",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, TIM3_CH3, USART1_RTS_DE_CK, USART1_CTS, I2C1_SCL, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI1_MISO/I2S1_MCK, SPI1_SCK/I2S1_CK, TIM1_CH2, TIM3_CH1, TIM3_CH2, TIM16_BKIN, TIM17_BKIN; additional function wakeup pin WKUP3."+ },+ {+ "number": "46",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH4, TIM17_CH1N, TIM3_CH4, I2C1_SDA, EVENTOUT, USART2_CTS, TIM16_CH1, TIM3_CH1, I2C1_SCL; no additional function listed on this package."+ },+ {+ "number": "47",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions USART2_CTS, TIM16_CH1, TIM3_CH1, I2C1_SCL, EVENTOUT; no additional function listed."+ },+ {+ "number": "48",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5V-tolerant (FT) I/O; alternate functions IR_OUT, USART2_RTS_DE_CK, TIM17_CH1, TIM3_CH2, I2C1_SDA, EVENTOUT; no additional function listed."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Discrepancy between Figure 7 (LQFP48 pinout diagram) and Table 12 (pin assignment table) regarding p; PA12[PA10] and PA11[PA9] pins are listed as remappable per note (1) in Table 12 (page 33). The pin n"+ ],+ "pages_sent": 108,+ "cost_usd": 1.2836,+ "at": "2026-09-23T10:32:16"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904241878228992",+ "pages": 108,+ "sha256": "c0de50247b672919",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}