component
STM1061N26WX6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM1061N26WX6F
STMicroelectronics · Supervisor And Reset ICs · SOT-23
STM1061N26WX6F from STMicroelectronics, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | tri_state | Open Drain active-low output; goes low when VCC drops below VTH-, remains low while VCC is below VTH- + VHYST; guaranteed to output correct logic state for VCC down to 0.7V. |
| 2 | VSS | power_in | Ground reference for the power supply; must be connected to system ground. |
| 3 | VCC | power_in | Supply voltage and input for the Voltage Detector; operating voltage range 0.7 to 6.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
STM1061N26WX6F - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
stm1061n26wx6f-etched.step/stm1061n26wx6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm1061n26wx6f.step/stm1061n26wx6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (23 pp, sha256
5b1838531083a3d9, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).