main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm1061n22wx6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm1061n22wx6f: viewers · Ray
package.json stm1061n22wx6f: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json stm1061n22wx6f: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/stm1061n22wx6f · Ray
stm1061n22wx6f-etched.fit.json stm1061n22wx6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm1061n22wx6f-etched.glb stm1061n22wx6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm1061n22wx6f-etched.step stm1061n22wx6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm1061n22wx6f.glb Publish 0.1.0 · Ray
stm1061n22wx6f.kicad_mod Publish 0.1.0 · Ray
stm1061n22wx6f.kicad_sym Publish 0.1.0 · Ray
stm1061n22wx6f.lbr Publish 0.1.0 · Ray
stm1061n22wx6f.step Publish 0.1.0 · Ray

STM1061N22WX6F

STMicroelectronics · Supervisor And Reset ICs · SOT-23-3

STM1061N22WX6F from STMicroelectronics, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT tri_state Open Drain active-low output; goes low when VCC drops below VTH- and remains low as long as VCC is below VTH- + VHYST.
2 VSS power_in Ground, reference for the power supply; must be connected to the system ground.
3 VCC power_in Supply voltage and input for the Voltage Detector.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-3
Category Power Management (PMIC)
Pins 3

CAD (KiCad official)

  • Symbol: STM1061N22WX6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: stm1061n22wx6f-etched.step / stm1061n22wx6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm1061n22wx6f.step / stm1061n22wx6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (23 pp, sha256 5b1838531083a3d9, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF