3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTLQ015M20R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
STLQ015M20R from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | DC input voltage with operating range from 1.5 V to 5.5 V. |
| 2 | GND | power_in | Ground connection. |
| 3 | EN | input | Enable input that controls regulator operation with logic high (≥0.7 V) enabling and logic low (≤0.4 V) disabling the device. |
| 4 | NC | unconnected | No connection. |
| 5 | OUT | power_out | Regulated output voltage selectable from 0.8 V to 3.3 V in 100 mV steps with 150 mA maximum output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | VIN | 1.5 | 5.5 | V | IOUT = 0 | 6 | |
| Operating input voltage | VIN | 1.55 | 5.5 | V | -40 °C < TJ < 125 °C, IOUT = 150 mA | 6 | |
| VOUT accuracy | VOUT | -2 | 2 | % | IOUT = 1 mA | 6 | |
| VOUT accuracy | VOUT | -3 | 3 | % | IOUT = 1 mA, -40 °C < TJ < 125 °C | 6 | |
| Static line regulation | ΔVOUT-LINE | -0.01 | 0.01 | %/V | VOUT +1 V ≤ VIN ≤ 5.5 V, IOUT = 1 mA | 6 | |
| Static load regulation | ΔVOUT-LOAD | -0.002 | 0.002 | %/mA | IOUT = 1 mA to 150 mA | 6 | |
| Dropout voltage | VDROP | 112 | mV | IOUT = 150 mA | 6 | ||
| Dropout voltage | VDROP | 300 | mV | IOUT = 150 mA, -40 °C < TJ < 125 °C | 6 | ||
| Output noise voltage | eN | 75 | µVRMS | 10 kHz to 100 kHz, IOUT = 10 mA, VOUT = 0.8 V | 6 | ||
| Quiescent current | IQ | 1 | 1.7 | µA | IOUT = 0 | 6 | |
| Quiescent current | IQ | 1.4 | 2.4 | µA | IOUT = 0 to 150 mA, -40 °C < TJ < 125 °C | 6 | |
| Shutdown current | IOFF | 1 | 200 | nA | VEN = GND, -40 °C < TJ < 125 °C | 6 | |
| Short-circuit current | ISC | 250 | 350 | mA | RL = 0 | 6 | |
| Enable input logic low | VEN | 0.4 | V | VIN = 1.5 V to 5.5 V | 6 | ||
| Enable input logic high | VEN | 0.7 | V | VIN = 1.5 V to 5.5 V | 6 | ||
| Enable pin input current | IEN | 1 | 200 | nA | VEN = 5.5 V | 6 | |
| Turn-on time | TON | 160 | µs | VOUT = 0.8 V, IOUT = 150 mA | 6 | ||
| Thermal shutdown | TSHDN | 170 | °C | 6 | |||
| Thermal shutdown hysteresis | 15 | °C | 6 | ||||
| Output capacitor capacitance | COUT | 0.47 | 10 | µF | see typical performance characteristics for stability | 7 | |
| Output capacitor ESR | ESR | 0.056 | 6 | Ω | 7 | ||
| DC input voltage | VIN | -0.3 | 7 | V | 5 | ||
| DC output voltage | VOUT | -0.3 | V | upper limit printed as VIN+0.3 V | 5 | ||
| Enable input voltage | VEN | -0.3 | V | upper limit printed as VIN+0.3 V | 5 | ||
| ESD human body model | ESD | -3 | 3 | kV | Human body model | 5 | |
| ESD machine model | ESD | -300 | 300 | V | Machine model | 5 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 5 | ||
| Max junction temperature | TOP | 150 | °C | 5 | |||
| Thermal resistance junction-ambient | RthJA | 255 | °C/W | 5 | |||
| Thermal resistance junction-case | RthJC | 81 | °C/W | 5 | |||
| Operating temperature range | -40 | 125 | °C | Temperature range (features list) | 1 |
CAD (KiCad official)
- Symbol:
STLQ015M20R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
stlq015m20r-etched.step/stlq015m20r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stlq015m20r.step/stlq015m20r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (19 pp, sha256
34dbd1feb4449e4f, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).